Kernel_Task taking up to 150% of my CPU

How can I fix! It happens every time the temperature is high. A few months ago, I replaced the LCD screen and speakers. I had this problem since.

"occurs when the temperature becomes high.

Reset the SMC > reset the management system (SCM) controller on your Mac - Apple Support

Tags: Notebooks

Similar Questions

  • TrustedInstaller.EXE active duty permanently, taking up to 50% of the CPU resources

    On my machine (Windows 7, 64-bit), the TrustedInstaller.EXE is permanently active. The amount of CPU used is constantly changing. 2 seconds 0% and then to 50% (I have a dual-core) for a second and then to 0.

    Restart the machine did not help. Also a full antivirus scan was negative.

    I followed the process with the Process Explorer tool. I can see that the process always access the same registry key when it becomes active. The key is

    HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Component base Servicing\PackageDetect\Microsoft-Windows-IIS-WebServer-AddOn-2-Package~31bf3856ad364e35~amd64~~0.0.0.

    Hi Robear,

    in the meantime, I found the process that has been responsible for the activities of trustedinstaller. It's the xenservice.exe that was installed with the Citrix XenCenter on my machine. I killed this process and all of a sudden the trustedinstaller.exe ceased operations. So the problem is now solved because the XenCenter can function without this process and I will delete it auto

    Thanks for your help.

    Martin

  • kernel_task runaway (from 300 to 600%) CPU with 2 external displays

    I have a MacBook Pro (retina, mid-2012), and for a year and a half, I've had episodes fighter during the kernel_task suddenly begin to consume all processor CPU (from 300 to 600%), is the response of the system so slow it is impossible to use.  I experience these episodes throughout the front 1-2 years that the machine went from Yosemite El Capitan and now Sierra.

    Normally, I use my MacBook with two external displays, both at work and at home.  At work, I have two external screens of Lenovo, and at home, I have two screens Apple (Apple Cinema Display 27-inch and 27-inch Apple Thunderbolt Display). I discovered that this kernel_task high CPU usage can only be stopped by disconnecting one of the external screens.  After unplugging an external display, the kernel_task subsides immediately to normal (< 5%).  After a few minutes, I can reconnect the 2nd external screen and proceed normally (sometimes for days, sometimes for hours, sometimes for a few minutes) until the kernel_task pulls up to 300-600% again.  The use of the high CPU kernel_task never happens unless I have two external displays connected.

    Note that since I upgraded to MacOS Sierra fugue kernel_task CPU frequency has increased considerably: of 1 kernel_task runaway every several days to a runaway almost every 10 minutes or so.   I don't have a reason this frequency has increased, but the runaway condition seems to have worsened by the fact that the photoanalysisd daemon is running like crazy on my grand (72 000) library of Photos.

    Also note that I started in recovery mode and have re-installed MacOS Sierra, and it has no effect on the runaway kernel_task.

    Any ideas on how to fix this resumption of kernel_task of all my CPU?

    I have attached my EtreCheck system report below.  This report was captured with two attached external displays.  At halfway while generating a report, the kicks and started kernel_task hogging CPU again.

    EtreCheck version: 3.0.5 (309)

    Report generated 2016-09-25 14:24:02

    Download EtreCheck from https://etrecheck.com

    Time 07:59

    Performance: Below average

    Click the [Support] links to help with non-Apple products.

    Click [details] for more information on this line.

    Problem: Computer is too slow

    Description:

    Sometimes, while working with my MacBook connected to two external displays, the kernel_task pulls up to 600 to 800% CPU and stays there until I unplug at least one of the external screens.  After disconnecting, the kernal_task subsides immediately to normal (< 5%).  After a few minutes, I can plug the 2nd external screen and proceed normally (sometimes for days, sometimes for hours, sometimes for a few minutes) until the kernel_task pulls up to 600 to 800% again.  The use of the high CPU kernel_task never happens unless I have two external displays connected.

    Hardware Information:

    MacBook Pro (retina, mid-2012)

    [Data sheet] - [User Guide] - [warranty & Service]

    MacBook Pro - model: MacBookPro10, 1

    1 2.6 GHz Intel Core i7 CPU: 4 strands

    16 GB RAM not extensible

    BANK 0/DIMM0

    OK 8 GB DDR3 1600 MHz

    BANK 1/DIMM0

    OK 8 GB DDR3 1600 MHz

    Bluetooth: Good - transfer/Airdrop2 taken in charge

    Wireless: en0: 802.11 a/b/g/n

    Battery: Health = Normal - Cycle count = 242

    Video information:

    Graphics Intel HD 4000

    NVIDIA GeForce GT 650M - VRAM: 1024 MB

    Color LCD 3840 x 2400

    LED Cinema Display 2560 x 1440

    Thunderbolt Display 2560 x 1440

    Software:

    macOS Sierra 10.12 (A 16, 323) - since the start time: about an hour

    Disc information:

    APPLE SSD SM512E Disk0: (500,28 GB) (Solid State - TRIM: Yes)

    EFI (disk0s1) < not mounted >: 210 MB

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    Boromir (disk1) /: 499,05 (Go 140,24 free)

    Storage of carrots: disk0s2 499.42 GB Online

    USB information:

    Apple Inc. FaceTime HD camera (built-in)

    Apple Inc. Apple keyboard / Trackpad

    Apple Inc. BRCM20702 hub.

    Apple Inc. Bluetooth USB host controller.

    Apple Inc. Apple LED Cinema Display

    ISight Apple Display Inc.

    Apple Inc. Audio display

    Apple Inc. FaceTime HD camera (display)

    Apple Inc. Apple Thunderbolt Display

    Apple Inc. Audio display

    Lightning information:

    Apple Inc. Thunderbolt_bus.

    Thunderbolt Inc. Apple display.

    Configuration files:

    / etc/sudoers, 2299 but file size expected 1563

    Guardian:

    Mac App Store and identified developers

    Kernel extensions:

    / Applications/Beats Updater.app

    com.beatsbydre.BeatsDFUSupport [no charge] (2.1.0 - SDK 10.10 - 2015-10-29) [Support]

    /Applications/proxifier.app

    [no charge] com.initex.proxifier.macosx.kext (2.15.2b1 - SDK 10.7 - 2015-09-10) [Support]

    / System/Library/Extensions

    [no charge] com.makemkv.kext.daspi (1.5-2016-09-25) [Support]

    Startup items:

    TiVoDesktop: Path: / Library/StartupItems/TiVoDesktop

    Startup items are obsolete in OS X Yosemite

    Launch system officers:

    [no charge] 7 tasks Apple

    [loading] Apple 156 jobs

    [running] Apple 108 jobs

    Launch system demons:

    [loaded] com.apple.jetsamproperties.Mac.plist (2016-08-25) [Support]

    [no charge] 41 tasks of Apple

    [loading] 153 jobs Apple

    tasks of Apple 109 [performance]

    Launch officers:

    [cannot] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a725c38014c95072f92651fb65e1bf9c8e43c37a2 3d420d.plist (2016-07-11) [Support]

    [loading] com.cisco.anyconnect.gui.plist (2014-06-10)

    com.DisplayLink.UserAgent.plist [no] (2012-08-14) [Support]

    [loading] com.google.keystone.agent.plist (2016-07-11) [Support]

    [loading] com.oracle.java.Java - Updater.plist (2013-01-04) [Support]

    Launch demons:

    [loading] com.adobe.ARMDC.Communicator.plist (2016-07-11) [Support]

    [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-07-11) [Support]

    [loading] com.adobe.fpsaud.plist (2016-08-29) [Support]

    com.backblaze.bzserv.plist [running] (2016-07-11) [Support]

    com.Cisco.anyconnect.vpnagentd.plist [running] (2014-06-10) [Support]

    com.DisplayLink.usbnivolistener.plist [no] (2012-08-14) [Support]

    [loading] com.google.keystone.daemon.plist (2016-09-09) [Support]

    [loading] com.oracle.java.Helper - Tool.plist (2013-01-04) [Support]

    [loading] com.sharpcast.xfsmond.plist (2013-11-30) [Support]

    User launch officers:

    com.backblaze.bzbmenu.plist [running] (2016-09-25) [Support]

    com.vladalexa.MagicPrefs.plist [running] (2016-09-25) [Support]

    Items in user login:

    iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

    HWMonitor Application (/ Applications/HWMonitor.app)

    Hidden CPULed Application (/ Applications/CPULed.app)

    Application of hidden activity monitor (/ Applications/Utilities/Activity Monitor.app)

    Dropbox application (/ Applications/Dropbox.app)

    Hidden SizzlingKeys Application (/ Applications/SizzlingKeys.app)

    Beats Updater Application (/ Applications/bat Updater.app)

    Hidden NET Monitor Application (/ Applications/Net Monitor.app)

    Plug-ins Internet:

    FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-15) [Support]

    QuickTime Plugin: 7.7.3 (2016-09-13)

    AdobePDFViewerNPAPI: 15.017.20053 - SDK 10.11 (2016-08-03) [Support]

    AdobePDFViewer: 15.017.20053 - SDK 10.11 (2016-08-03) [Support]

    Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-15) [Support]

    Silverlight: 5.1.20913.0 - SDK 10.6 (2014-03-07) [Support]

    JavaAppletPlugin: Java 8 update 101 build 13 (2016-08-18) check the version of

    User Plug-ins internet:

    WebEx64: SDK-1.0-10.10 (2016-01-23) [Support]

    Safari extensions:

    Ghostery - GHOSTERY, Inc. - https://www.ghostery.com/ (2016-03-15)

    3rd party preference panes:

    Backblaze backup (2016-07-11) [Support]

    Flash Player (2016-08-29) [Support]

    FUSE for OS X (OSXFUSE) (2013-11-30) [Support]

    Java (2016-08-18) [Support]

    MagicPrefs (2016-01-20) [Support]

    MenuMeters (2014-10-22) [Support]

    TiVo Desktop (2009-11-23) [Support]

    Time Machine:

    Skip system files: No.

    Mobile backups: OFF

    Automatic backup: YES

    Volumes to back up:

    Boromir: Disc size: 499,05 GB disc used: 358,81 GB

    Destinations:

    Frodo Time Machine [Local]

    Total size: 999,86 GB

    Total number of backups: 40

    An older backup: 09/09/16, 02:09

    Last backup: 25/09/16, 11:49

    Backup disk size: too small

    Backup size GB 999,86 < (disc 358,81 GB X 3)

    Top of page process CPU:

    345% kernel_task

    56% Information System

    44% cloudphotosd

    42% iTunesCacheExtension

    30% activity monitor

    Top of page process of memory:

    1.44 GB kernel_task

    1.18 GB com.apple.WebKit.WebContent (6)

    786 MB mds_stores

    590 MB bztransmit

    Mdworker (18) 492 MB

    Virtual memory information:

    256 MB of free RAM

    4 pm used GB RAM (5.96 GB being cached)

    768 KB used Swap

    Diagnostic information:

    25 sep, 2016, ~/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-09-25-134618_ 13:46:18 [redacted] .crash

    System/Library/Frameworks/WebKit.Framework/versions/A/XPCServices/com. Apple.We bKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit.WebContent

    25 sep, 2016, 13:19:15 /Library/Logs/DiagnosticReports/photolibraryd_2016-09-25-131915_[redacted].cpu_ resource.diag [details]

    /System/Library/PrivateFrameworks/PhotoLibraryPrivate.Framework/versions/A/Supp ort/photolibraryd

    25 sep, 2016, 13:06:44 test - passed

    September 22, 2016, 16:03:11 ~/Library/Logs/DiagnosticReports/Microsoft Word_2016-09-22-160311_ [redacted] .crash

    com.microsoft.Word - Applications / Microsoft Office 2008/Microsoft Word Word.app/Contents/MacOS/Microsoft

    Start safe mode, use this way and see if the problem is recurring

  • Helps the slow macbook! quicklookd and kernel_task % high... Posted ETRECHECK.

    Hello, I'm not sure how to diagnose or fix myself, so I hope someone can help!

    When one looks at the Activity Monitor there are moments where kernel_task or quicklookd are 99% of the CPU.

    The fan is going crazy for these periods...

    My macbook is running abnormally slow today and there are times when the rainbow reel comes after each letter or Word as I type. Applications take much too long to open and Safari is taking forever just to load the next page.

    How can I do to speed up my mac and what is causing these processes use so much CPU?

    Also - it says on the bottom right of my activity monitor "process: 192" Wow is not much?

    Here's my report from long hours near EtreCheck... I hope someone can help! Please, I beg you!

    EtreCheck version: 3.0.2 (306)

    Report generated 2016-08-26 07:03:12

    Download EtreCheck from https://etrecheck.com

    Duration 52:24

    Performance: Poor

    Click the [Support] links to help with non-Apple products.

    Click [details] for more information on this line.

    Problem: Computer is too slow

    Description:

    Hardware information:

    MacBook Pro (13 inch, early 2011)

    [Data sheet] - [User Guide] - [warranty & Service]

    MacBook Pro - model: MacBookPro8, 1

    1 2.3 GHz Intel Core i5 CPU: 2 strands

    4 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK 2 GB DDR3 1333 MHz

    BANK 1/DIMM0

    OK 2 GB DDR3 1333 MHz

    Bluetooth: Old - transfer/Airdrop2 not supported

    Wireless: en1: 802.11 a/b/g/n

    Battery: Health = Normal - Cycle count = 522

    Software:

    OS X El Capitan 10.11.5 (15F34) - since the start-up time: 16 hours

    Disk information:

    USB information:

    Apple Inc. FaceTime HD camera (built-in)

    Apple Inc. Apple keyboard / Trackpad

    Apple Inc. BRCM2070 hub.

    Apple Inc. Bluetooth USB host controller.

    Computer, Inc. Apple IR receiver.

    Information thunderbolt:

    Apple Inc. Thunderbolt_bus.

    Porter:

    Mac App Store and identified developers

    Launch system officers:

    [no charge] 8 tasks of Apple

    [loading] 153 jobs Apple

    [running] Apple 56 jobs

    [killed] 21 tasks of Apple

    21 killed process lack of RAM

    Launch system demons:

    [no charge] 45 Apple jobs

    tasks of Apple 152 [loading]

    [running] Apple 78 jobs

    [killed] 15 tasks Apple

    15 killed process lack of RAM

    Launch Agents:

    [cannot] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a725c38014c95072f92651fb65e1bf9c8e43c37a2 3d420d.plist (2016-07-30) [Support]

    com.waltop.waltoptablet.plist [running] (2009-04-23) [Support]

    Launch demons:

    [loading] com.adobe.ARMDC.Communicator.plist (2016-07-30) [Support]

    [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-07-30) [Support]

    com.Adobe.fpsaud.plist [no] (2016-06-13) [Support]

    [loading] com.macpaw.CleanMyMac3.Agent.plist (2016-08-18) [Support]

    com.Microsoft.Office.licensing.helper.plist [loading] (2011-03-10) [Support]

    User launch officers:

    [loading] com.bittorrent.uTorrent.plist (2015-02-09)

    [loading] com.google.keystone.agent.plist (2016-07-12) [Support]

    [loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-08-18)

    com.wondershare.AnjoyTunesHelper.plist [no] (2015-08-05) [Support]

    User Login Items:

    LoginHelper SMLoginItem (/ Applications/Go for Gmail.app/Contents/Library/LoginItems/LoginHelper.app)

    Plug-ins Internet:

    FlashPlayer - 10.6: 22.0.0.192 - SDK 10.9 (2016-06-18) [Support]

    QuickTime Plugin: 7.7.3 (2016-05-18)

    AdobePDFViewerNPAPI: 15.017.20053 - SDK 10.11 (2016-08-02) [Support]

    AdobePDFViewer: 15.017.20053 - SDK 10.11 (2016-08-02) [Support]

    Flash Player: 22.0.0.192 - SDK 10.9 (2016-06-18) obsolete! Update

    Default browser: 601 - SDK 10.11 (2016-05-18)

    SharePointBrowserPlugin: 14.6.6 - SDK 10.6 (2016-08-02) [Support]

    Silverlight: 5.1.50428.0 - SDK 10.6 (2016-08-25) [Support]

    JavaAppletPlugin: 15.0.1 - SDK 10.11 (2011-12-27), check the version

    User Plug-ins internet:

    Web of Google Earth plugin: 7.1 (2013-10-07) [Support]

    Time Machine:

    Skip system files: No.

    Mobile backups: WE

    Automatic backup: YES

    Volumes to back up:

    Destinations:

    My Passport for Mac [Local]

    Total size: 999,83 GB

    Total number of backups: 6

    An older backup: 29/03/16, 19:22

    Last backup: 11/08/16, 22:46

    Size of backup drive: Excellent

    Backup size 999,83 GB > (disk size 0 B X 3)

    Top of page process CPU:

    5% quicklookd

    4% WindowServer

    3% syncdefaultsd

    3% kernel_task

    3% system_profiler (2)

    Top of page process of memory:

    660 MB kernel_task

    Quicklookd 98 MB

    90 MB system_profiler (2)

    Com.apple.WebKit.WebContent (2) 37 MB

    25 MB spindump

    Virtual memory information:

    12 MB of free RAM

    3.99 GB used RAM (176 MB cache)

    37.15 Go Swap used

    Diagnostic information:

    August 26, 2016, 06:08:13 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-08-26-060813_[redacted].crash

    /Applications/EtreCheck.app/Contents/MacOS/EtreCheck

    August 26, 2016, 12:50:56 AM /Library/Logs/DiagnosticReports/quicklookd_2016-08-26-005056_[redacted].cpu_res ource.diag [details]

    /System/Library/frameworks/QuickLook.framework/resources/quicklookd.app/content s/MacOS/quicklookd

    August 23, 2016, 15:30:32 ~/Library/Logs/DiagnosticReports/familycircled_2016-08-23-153032_[redacted].cra sh

    /System/Library/PrivateFrameworks/FamilyCircle.Framework/versions/A/resources/f amilycircled

    August 23, 2016, ashes of /Library/Logs/DiagnosticReports/softwareupdated_2016-08-23-140200_[redacted].cr 14:02

    / System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdated

    A lot of junk that you have installed on your machine.

    Get rid of the CleanMyMac and Torrent software.

  • Running process crushing the CPU

    Hey guys,.

    I installed Sierra on my Macbook Pro 13 "2015 today and had a problem where the process of"photoanalysisd"ran all the time.  I used between 120-150% of the CPU.  When I force quit, he came right away.  After a few hours, I went back to el Capitan.  If there are others out there who have had the same experience and a possible solution would be greatly appreciated.  Thank you.

    I think the "photoanalysisd" process of facial recognition / scene on your photo library.  I've seen this as well as a few other processes using higher than normal amounts of CPU.  A few hours later, everything is back to normal once all the new features have done their thing.  Depending on how many files, the speed of your system (CPU and storage read/write), and all what you use, this background process will end eventually.  It took a few hours for me to see that I had the minimal use of the processor idling.  I hope this helps.

  • kernel_task slow down the new iMac 27 "5K to a crawl

    I've owned my new iMac (OSX El Capitan 10.11.4) for more than 4 months now and have had no complaints other than those sometimes caused by the limited installed 8 GB of memory (an upgrade to 32 GB is on order).  Suddenly last week, I noticed my machine slows down considerably and heats up. Check activity monitor, I have seen that kernel_task took 200 to 400% of the CPU.  Despite the heat, I noticed that I could not hear the fan running, so I downloaded Mac Fan Control indicating the fan did not work - I took it in the center of authorized Service Apple and they confirmed that indeed the fan did not work and ordered me a new one that I expect.  I'm not sure that the fan has never worked - as I remember ever heard - I naively thought the new iMacs are just quieter.

    In the meantime, I'm trying to understand what is causing the problem kernel_task.   I noticed it uses very little CPU on most boot-up until I have load Lightroom (I'm a photographer and use this app heavily) after which zoomed up to more than 200% kernel_task, video playback has the same effect.   However, if I use only my browser for the e-mail and listening to iTunes kernel_task remains down on the only figure of % CPU and machine stay cool.   The person I talked to Apple's Service said she has seen this before and the solution was to do a clean reinstall of the operating system.   I want to save as a last resort - after setting of the fan and installing more memory.    I wonder if heat build-up missing a fan has an effect on kernel_task or help to have more memory?  In any case this is the report of EtreCheck:

    EtreCheck version: 2.9.11 (264)

    Report generated 2016-04-17 13:17:13

    Download EtreCheck from https://etrecheck.com

    Duration 05:18

    Performance: average

    Click the [Support] links to help with non-Apple products.

    Click [details] for more information on this line.

    Problem: Computer is too slow

    Hardware Information:

    iMac (retina 5K, 27 inches, end of 2015)

    [Data sheet] - [User Guide] - [warranty & Service]

    iMac - model: iMac17, 1

    1 3.3 GHz Intel Core i5 CPU: 4 strands

    8 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK MHz 4 GB DDR3-1867

    0/DIMM1 BANK

    Vacuum

    BANK 1/DIMM0

    OK MHz 4 GB DDR3-1867

    BANK 1/DIMM1

    Vacuum

    Bluetooth: Good - transfer/Airdrop2 taken in charge

    Wireless: en1: 802.11 a/b/g/n/ac

    Video information:

    AMD Radeon R9 M395 - VRAM: 2048 MB

    iMac 5120 x 2880

    Software:

    OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour

    Disc information:

    ST2000DM001 disk HARD APPLE disk0: (2 TB) (rotation)

    EFI (disk0s1) < not mounted >: 210 MB

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    Macintosh HD (2) /: 2.11 TB (905,59 GB free)

    Storage of carrots: disk1s2 120.99 GB Online

    Storage of carrots: disk0s2 2.00 TB online

    APPLE SSD SM0128G disk1: (121,33 GB) (Solid State - TRIM: Yes)

    EFI (disk1s1) < not mounted >: 210 MB

    Boot OS X (disk1s3) < not mounted >: 134 MB

    Macintosh HD (2) /: 2.11 TB (905,59 GB free)

    Storage of carrots: disk1s2 120.99 GB Online

    Storage of carrots: disk0s2 2.00 TB online

    USB information:

    Broadcom Corp. Bluetooth USB host controller.

    Apple Inc. FaceTime HD camera (built-in)

    Canon Canon CAPT USB Device

    Lightning information:

    Apple Inc. Thunderbolt_bus.

    Guardian:

    Mac App Store and identified developers

    Kernel extensions:

    / Library/Extensions

    com [no charge]. FTDI.driver.D2XXHelper (1.0 - SDK 10.11 - 2016-04-07) [Support]

    [no charge] expressvpn.tap (20150118 - 2016-04-07) [Support]

    [loading] expressvpn.tun (20150118 - 2016-04-07) [Support]

    / System/Library/Extensions

    com.Wacom.kext.wacomtablet [no charge] (Tablet Wacom 6.3.15 - 2 - SDK 10.11 - 2016-04-07) [Support]

    Launch system officers:

    [loaded] 7 tasks Apple

    [loading] 154 tasks Apple

    [operation] 77 tasks Apple

    Launch system demons:

    [loaded] 45 tasks Apple

    [loading] 155 tasks Apple

    [operation] 88 tasks Apple

    Launch officers:

    [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-04-12) [Support]

    [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2015-12-14) [Support]

    [operation] com.adobe.AdobeCreativeCloud.plist (2016-02-14) [Support]

    [loading] com.google.keystone.agent.plist (2016-03-02) [Support]

    [loading] com.oracle.java.Java - Updater.plist (2015-11-22) [Support]

    [operation] com.wacom.wacomtablet.plist (2015-11-04) [Support]

    [operation] jp.co.canon.CUPSCAPT.BG.plist (2015-08-23) [Support]

    Launch demons:

    [loading] com.adobe.ARMDC.Communicator.plist (2015-12-14) [Support]

    [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2015-12-14) [Support]

    [operation] com.adobe.adobeupdatedaemon.plist (2016-04-12) [Support]

    [loading] com.adobe.agsservice.plist (2015-11-22) [Support]

    [loading] com.cocoatech.pathfinder.SMFHelper7.plist (2015-11-22) [Support]

    [loading] com.expressvpn.tap.plist (2016-02-11) [Support]

    [loading] com.expressvpn.tun.plist (2016-02-11) [Support]

    [loading] com.google.keystone.daemon.plist (2016-03-02) [Support]

    [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

    [loading] com.oracle.java.Helper - Tool.plist (2015-11-22) [Support]

    [operation] com.surteesstudios.hddfancontroldaemon.plist (2014-06-03) [Support]

    [loading] com.wacom.displayhelper.plist (2015-11-04) [Support]

    User launch officers:

    [loading] com.adobe.AAM.Updater - 1.0.plist (2015-11-22) [Support]

    [loading] com.bittorrent.uTorrent.plist (2015-11-23) [Support]

    Items in user login:

    Fan of Macs control application (/ Applications/Mac Fan Control.app)

    Dropbox application (/ Applications/Dropbox.app)

    Other applications:

    [operation] 2BUA8C4S2C.com.agilebits.onepassword - osx-helper

    [ongoing] com.adobe.CCLibrary.78432

    [ongoing] com.adobe.CCXProcess.53472

    [operation] com.adobe.acc.AdobeDesktopService.77152.F4AF8B93-6EA8-4645-B6BA-A978E4ACF8E1

    [ongoing] com.Adobe.accmac.75232

    [ongoing] com.crystalidea.MacsFanControl.992

    [ongoing] com.etresoft.EtreCheck.189792

    [ongoing] com.getdropbox.dropbox.104032

    com.rockysandstudio.Memory-[ongoing] Diag.104992

    [loading] com.rockysandstudio.Memory - Diag.Launch - Helper

    [ongoing] com.wacom.TabletDriver.143712

    [ongoing] com.wacom.WacomTouchDriver.143392

    [loading] 398 tasks Apple

    [operation] 198 tasks Apple

    Plug-ins Internet:

    AdobeAAMDetect: 3.0.0.0 - SDK 10.9 (2016-04-12) [Support]

    QuickTime Plugin: 7.7.3 (2016-03-22)

    AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-09) [Support]

    AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-09) [Support]

    Default browser: 601 - SDK 10.11 (2016-03-22)

    SharePointBrowserPlugin: 14.0.0 (2010-08-25) [Support]

    WacomTabletPlugin: WacomTabletPlugin 2.1.0.6 - SDK 10.9 (2015-11-04) [Support]

    JavaAppletPlugin: Java 8 updated 66 17 (2016-02-12) check the version of build

    3rd party preference panes:

    Fan HDD control (2016-04-16) [Support]

    Java (2015-10-07) [Support]

    WacomTablet (2015-11-04) [Support]

    Time Machine:

    Skip system files: No.

    Mobile backups: OFF

    Automatic backup: YES

    Volumes to back up:

    Macintosh HD: Disc size: 2.11 TB disk used: 1.21 TB

    Destinations:

    [Network] data

    Total size: TB 3.00

    Total number of backups: 38

    An older backup: 04/01/16, 11:17

    Last backup: 17/04/16, 11:39

    Backup disk size: too small

    Backup TB 3.00 size < (disc 1.21 TB X 3)

    Top of page process CPU:

    6% WindowServer

    kernel_task 2%

    Synchronization of 0%

    0% AdobeUpdateDaemon

    0% captmoncnabc

    Top of page process of memory:

    803 MB kernel_task

    262 MB mdworker (14)

    213 MB Adobe CEF Helper (2)

    Mds_stores 156 MB

    156MO Dock

    Virtual memory information:

    1.90 GB of free RAM

    6.10 GB used RAM (3.39 GB being cached)

    Used Swap 0 B

    Diagnostic information:

    17 April 2016, 12:56:18 test - passed

    Any suggestions would be greatly appreciated.

    In the meantime, I'm trying to understand what is causing the problem kernel_task.

    Bad fan is the cause. The machine is to be limited to avoid overheating.

  • Suddenly very slow - being report attached - it's just the ram?




    Hi all


    my macbook suddenly turns very slowly, he has been allowed recently after some graphics clamping because it is so old!


    things are critical.


    If it's just the ram, (I doubt it, but maybe wrong!) can someone help me with my maximum?


    I think that his officially 4 (2 x 2), but remember reading that a 4 + 2 can work?


    Thank you


    Paul





    EtreCheck version: 2.9.10 (261)

    Report generated 2016-04-13 13:35:22

    Download EtreCheck from https://etrecheck.com

    Time 06:22

    Performance: Below average

    Click the [Support] links to help with non-Apple products.

    Click [details] for more information on this line.

    Problem: Computer is too slow

    Description:

    Suddenly very slow - opening system same pref is delicate. posing for the window of the attachment in mail for mac can take 2 minutes. No process obvious defect. Mac Word fails to meet very often. I hope someone can help! Thank you

    Hardware Information:

    MacBook Pro (17-inch, 2.4 GHZ)

    [Data sheet] - [User Guide] - [warranty & Service]

    MacBook Pro - model: MacBookPro3, 1

    1 2.4 GHz Intel Core 2 Duo CPU: 2 strands

    2 GB RAM - Insufficient RAM! Extensible - [Instructions]

    BANK 0/DIMM0

    1 GB DDR2 SDRAM 667 MHz ok

    BANK 1/DIMM1

    1 GB DDR2 SDRAM 667 MHz ok

    Bluetooth: Old - transfer/Airdrop2 not supported

    Wireless: en1: 802.11 a/b/g/n

    Battery: Health = Normal - Cycle count = 5

    Video information:

    GeForce 8600M GT - VRAM: 256 MB

    Color LCD 1680 x 1050

    Software:

    OS X El Capitan 10.11.3 (15 d 21) - since the start time: about an hour

    Disc information:

    FUJITSU MHW2160BHPL disk0: (160,04 GB) (rotation)

    EFI (disk0s1) < not mounted >: 210 MB

    The PR (disk0s2) MacBookPro /: 159,18 GB (28,37 GB free)

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    USB information:

    Apple computer Apple keyboard / Trackpad

    Computer, Inc. Apple IR receiver.

    Built-in ISight from Apple Inc..

    Guardian:

    Mac App Store and identified developers

    Kernel extensions:

    / System/Library/Extensions

    com [no charge]. LaCie.ScsiType00 (1.2.11 - SDK 10.5 - 2016-04-13) [Support]

    com.jmicron.driver.jmPeripheralDevice [no charge] (2.0.4 - 2016-04-13) [Support]

    com.lacie.driver.LaCie_RemoteComms [no charge] (1.0.1 - SDK 10.5 - 2016-04-13) [Support]

    [no charge] com.oxsemi.driver.OxsemiDeviceType00 (1.28.13 - SDK 10.5 - 2016-04-13) [Support]

    Launch system officers:

    [loaded] 9 tasks Apple

    [loading] 150 tasks Apple

    [operation] 55 tasks Apple

    [killed] 22 tasks Apple

    the 22 killed process lack of RAM

    Launch system demons:

    com.apple.Kerberos.kdc.plist [failure]

    [loaded] 46 tasks Apple

    [loading] 152 tasks Apple

    [operation] 77 tasks Apple

    [killed] 12 tasks Apple

    12 killed process lack of RAM

    Launch officers:

    [loading] com.epson.Epusp.plist (2009-07-06) [Support]

    [operation] com.flipvideo.FlipShare.AutoRun.plist (2010-10-11) [Support]

    [loading] com.lacie.eventsactions.launcher.agent.plist (2012-08-14) [Support]

    [operation] com.motive.alertDetectorHost.plist (2014-09-06) [Support]

    [operation] com.motive.userAgent.plist (2014-09-06) [Support]

    Launch demons:

    [loading] com.adobe.fpsaud.plist (2016-04-05) [Support]

    [operation] com.freemacsoft.appcleanerd.plist (2014-09-28) [Support]

    [failure] com.lacie.desktopmanager.service.plist (2012-08-14) [Support]

    [operation] com.motive.systemDaemon.plist (2014-09-06) [Support]

    [operation] com.sonos.SonosLibraryServer.plist (2016-03-16) [Support]

    [loading] com.sonos.smbbump.plist (2014-08-10) [Support]

    [loading] net.sourceforge.MonolingualHelper.plist (2012-11-13) [Support]

    User launch officers:

    com.apple.SafariBookmarksSyncer.plist [loading]

    Items in user login:

    None

    Other applications:

    [loading] 386 tasks Apple

    [operation] 158 tasks Apple

    [killed] 35 tasks Apple

    Plug-ins Internet:

    npMotive: 1.0.0 - 10.7 SDK (2014-07-28) [Support]

    FlashPlayer - 10.6: 21.0.0.213 - SDK 10.6 (2016-04-13) [Support]

    QuickTime Plugin: 7.7.3 (2016-01-14)

    Flash Player: 21.0.0.213 - SDK 10.6 (2016-04-13) [Support]

    JavaAppletPlugin: 15.0.1 - SDK 10.11 (2011-11-27) check the version of

    Default browser: 601 - SDK 10.11 (2016-01-14)

    OfficeLiveBrowserPlugin: 12.3.5 (2016-02-09) [Support]

    RealPlayer Plugin: unknown

    Silverlight: 5.1.20913.0 - SDK 10.6 (2013-11-17) [Support]

    iPhotoPhotocast: 7.0 (2012-11-13)

    3rd party preference panes:

    Fan control (2007-10-03) [Support]

    Flash Player (2016-04-05) [Support]

    Time Machine:

    Skip system files: No.

    Automatic backup: NON - automatic backup disabled

    Volumes to back up:

    MacBookPro PR: disk size: 159,18 GB disc used: 130,82 GB

    Destinations:

    Time Machine [Local] backups

    Total size: 0 B

    Total number of backups: 0

    An older backup: -.

    Last backup: -.

    Backup disk size: too small

    Save the size 0 B < (disc 130.82 GB X 3)

    Top of page process CPU:

    7% kextcache (3)

    4% kernel_task

    4% WindowServer

    3% activity monitor

    1% mdworker (8)

    Top of page process of memory:

    Kernel_task 311 MB

    150 MB com.apple.WebKit.WebContent

    Mdworker (8) 94 MB

    63 MB activity monitor

    49MO Finder

    Virtual memory information:

    60 MB of free RAM

    1.94 GB used RAM (502 MB cache)

    2 MB used Swap

    Diagnostic information:

    April 13, 2016, 12:54 ~/Library/Logs/DiagnosticReports/suggestd_2016-04-13-125400_[redacted].crash

    /System/Library/PrivateFrameworks/CoreSuggestions.Framework/versions/A/support/ suggestd

    April 13, 2016, 12:47:39 PM/Library/Logs/DiagnosticReports/Microsoft Word_2016-04-13-124739_ [redacted] .hang

    / Applications/Microsoft Office 2008/Microsoft Word.app/Contents/MacOS/Microsoft Word

    13 April 2016, 12:27:03 self-test - spent

    April 13, 2016, 11:27:19 AM/Library/Logs/DiagnosticReports/Microsoft Word_2016-04-13-112719_ [redacted] .hang

    the 2007 17 "MBP may be increased up to 6 via a 1 2 GB and 1 GB a 4 GB PC2-5300 DDR 2 667 MHz. chips

    2 GB, trying to run 10.11 and then DO something ELSE that the operating system will stretch this system.

    more RAM will give this computer room to breathe when he tries to run this OS.

    I recommend these guys to the United States, and they also have a European distribution

    http://eShop.MacSales.com/MyOWC/upgrades.cfm?model=268

  • Windows vista sp2 freezes at 100% then stops

    Hi all

    having some difficulties to install new updates for vista sp2 I recently bought a new dell xps 625 and installed all the updates correctly, but the last vista I came was the sp2 from vista!

    Solange install obtained 100% then the cpu is not responding and the clock on the pc freezes and the only way I can get it back is to unplug the cpu of the wall?

    Ive left in frozen state for more than 2 hours, thinking maybe it was a big update but still no joy?

    I have windows vista 64-bit home premium.

    Ive tried taking all anti-virus etc off cpu but still does the same thing?

    Help, please

    beano2004

    rideriam,
    I suggest you a couple more things to try with this situation.  Stop first perform a clean boot , then download and manually install all pending updates.  Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Freeze Windows Explorer

    My Windows Explorer freezes lately.  I log on, have no other applications open, then select 'My Documents '. Next, I get a blank white window.  I went to the Task Manager to find that Explorer.exe "unresponsive". When I look at the process in the Task Manager, it says that Explorer.exe taking 50% or more of my CPU.

    I have then to close the process and log in again.
    How can I fix it?

    Hello

    If it's a PC remove ALL power and reconnect the cables (both ends where possible), memory and cards
    -in fact, remove and replace - do not just tight. Clear vents and make sure the fans are working. For
    a laptop computer on all you can do to reinstall the memory, turn off vents and make sure the fans are working.

    ----------------------------------------------------

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    ----------------------------------------------------

    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ===========================================

    Refer to these discussions because many more excellent advice however don't forget to check your antivirus
    programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
    first.

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/GP/slow_windows_performance/en-us

    Performance and Maintenance Tips
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

    Explorer Windows stopped working
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

    Hope these helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Problems with several .exe slow down my computer - see in the Task Manager.

    Hi everyone - I had posted in other sections of the forum such as: http://answers.microsoft.com/en-us/windows/forum/windows_7-files/why-does-dllhostexe-com-surrogate-consumes-memory/bd7e42bb-802d-4eb9-95b2-2bb6b566996d?page=1&tm=1416087694827

    but still have no answer to my problem - I just wanted to reference I've tried many "patches" suggested, without success.

    On the question... in addition to causing me problems of dllhost.exe, I now see a list of other authors in my task which are guilty of collaboration Manager.  The interesting thing is that I put the finger on a particular instance of dllhost.exe (COM Surrogate) who is about 8 k in size - whenever I'm deleting this one (which can sometimes be difficult to find when there are multiple instances of similar size) all other instances of dllhost.exe problem simultaneously remove themselves as well.  This is only a temporary solution as the problem will resume as soon as 10 minutes later, gobble up all my CPU and memory.

    Anyway - as I said, I noticed several other spots displayed - the interesting thing is that these tasks ALSO disappear when I delete the task of dllhost.exe k 8 initiators.

    Here is the list of the other guys who gobble up my system resources:

    dllhst3g.exe

    dpnsvr.exe

    dplaysvr.exe

    dvdupgrd.exe

    Rundll32.exe

    wiaacmgr.exe

    cmmon32.exe

    Has anyone else noticed these programs causing problems?  I would like to know how to solve this problem, but since the last message in the previous topic, it still has not been resolved by Microsoft...

    I know this post is a few months old, but I stumbled across it all fighting the same problem on a laptop of family members.  McAfee or Malwarebytes was able to track it down in my experience either.

    The task Mgr showed the same process taking a ton of memory and CPU.

    To resolve this issue, it turns that Symantec posted a tool that you can leverage.  Here is the link: http://www.symantec.com/security_response/writeup.jsp?docid=2014-111020-0511-99

    I would leverage the link Symantec before using the links of Evan (above), these links are to sites with strong ads and an EXE from a developer private.

    I hope this helps.

    -Higgins

  • Generate Peak 16 hours

    Recently, I reformatted my computer and did a fresh install of the CC. I'm under first 2015.3.

    Last night, I opened a project and it's understandable, on a new machine, must generate peak files. I don't really bother first while she does it. I usually play the waiting game. I found that it took a long time so I let it run all night. I'll be back this morning - 16 hours later - and it's generating peak files.

    When I look at my calendar (duration 38 minutes), audio excerpts, which had no waveform last night now have waveforms while essentially working. But there is always a ton of clips without waveforms.

    This is what he said in the precise corner? As if it said 'file [file name] Max generation' should I take this as he works on this file? I ask this question because he's going to jump through a bunch of files and then it will hit a file it seems constantly in reprocessing for 45 minutes to an hour or more. Then it will pass.

    Generation of advanced files, most to me in the past, has only really take about 30 to 45 minutes in total. My activity monitor says that first use 150% of my CPU.

    I'm under El Capitan, quad-core with 32 GB of RAM.

    The solution for me is 'save project '.

    Close

    Start a new project

    Troubled project import

    I can paste reference to associated thread, but a few hours from now on, as I will not search currently

  • Please help me on the jdeveloper to weblogic application deployment

    At the beginning I just thought after developing an adf application then just deploy as an .ear file and deploy it in the weblogic console and everything will be ok. But actually I had a lot of problems. Then I had a tutorial for it and I do what he says step by step, but some new problems occurred. This is the tutorial I mentioned: [how-to: ADF Deployment Guide | http://www.oracle.com/webfolder/technetwork/jdeveloper/howto/11114/managedserver/wlsadfms.htm]

    Now, could someone tell how did deploy your adf application?

    Here are the errors I got.

    It's the packege of installation and the operating system I use:
    1. 6.3_x64 + jdeveloper11123.jar(include wls10.3.5) + adr centOS (the package name is ofm_appdev_generic_11.1.1.6.0_disk1_1of1.zip) [and earlier, I used a solaris11 of oracle vm and install jdeveloper11.1.2.3, the same probem occurred as CentOS.]
    2 Win7_x64 + jdeveoper11123.exe(include wls10.3.5) + adr mentioned above

    Here are the problems I get:
    in case 1, after that I installed the jdeveloper (using the sun jdk 1.7), the weblogic seems to be fine but I na not configure a domain. But after I opened a
    request (which I get from the oracle jdeveloper tutorial demo, which works well in my Win7 env) and I run it, the integrated weblogic can not get
    has started. First in the console it says identifier jrocket - is not recognized, then I edit the setDomainEnv.sh and the startWebLogic.sh file in the
    integrated wls area (that of the Director of .jdeveloper) to assign to the variable JAVA_VM - server. After that another problem emerged: when the
    WLS goes to the 'start-up' status, it is blocked and I turn to System Monitor shows only a thread of java using more than 1 GB of memory in my system
    and occupy 150% of my cpu (it's a dual-core computer). I wait about 5 minutes, when an error came up said "PermSize is too small".so I change the
    setDomainEnv.sh file to set the PermSize be 1024 m and MaxPermSize to 2048. (the name of the variable is something like that, maybe not the)
    exactly on time. "I think you can understand that one is). But the problem is still there.

    then in 2 cases in the first place the jdev and integrated wls works fine, but when I deploy an application that works well in one ear of the file, and then deploy it to a
    WLS (10.3.5) autonomous it never Works.the dumb mistake is something libraries of reference/dependencies was not found. Then I tried again a server connection to
    the autonomous wls and I got the tutorial [how_to_deploy_adf | http://www.oracle.com/webfolder/technetwork/jdeveloper/howto/11114/managedserver/wlsadfms.html], as the tutorial says I my standalone patch
    WLS with adr and everything is fine, no error reported. Then I tried the new server in the new slot machine the adminserver management and apply the
    the ADF model in him will overload / console em. But after I restarted the new server (by the console, and then by file stop + startweblogic.bat) the server is running
    the application in the new server is just 'not available '. I tried for three times in three computer, two of them are running win7, it runs Windows XP.

    I don't know what the problem is and I'm quite a beginner on this subject. Someone help me please. Thank you very much!

    respect, Neo.

    Neo,
    There are a few problems. First of all, jdev comes with its own jdk provided in the product (jdk 1.6_x). The next thing is that if you use JDev 11.1.2.3.0 to build an application you must use a wls 10.3.5 and 10.3.6 where you need to install the appropriate on runtime. In your case, you first install adf runtime 11.1.1.6.0 and then you need to install two patches that update the adf to 11.1.2.3.0 life. These husks are only available through support.oracle.com, which means that you need a support contract to get.
    More information you can find in my blog http://tompeez.wordpress.com/2011/09/14/jdeveloper-versions-vs-weblogic-server-versions/
    The rest of your problems disappear once you have installed the adf right on your server runtime.

    Timo

  • Lab Setup - it will blow my supply?

    I'll put up Lab at home, I can prepare VCP certification. I live in a 800sft APPT. That's what I think of having in my home lab setup. Please suggest if it will be good and my main concern is can I have a lot of these systems to my appt and hope he doesnot BLOW AWAY my electrical system in my apartment, someone at - it had a similar installation in an appt.

    1.ESX1

    Dell Poweredge T110

    250 GB HARD drive

    4 GB of Ram

    2.ESX2

    Dell Poweredge T110

    250 GB HARD drive

    4 GB of Ram

    2 VC

    HP Desktop dual-core

    4 GB of ram

    200 GB HARD drive

    Couple of monitors also.

    Please suggest, thanks in advance.

    Server Dell PowerEdge G11 are fine (but to be honest, all sellers are good).

    Intel or AMD could be the same... so check what could be better (but I suggest taking at least a 6 core CPU and at least 12 GB of RAM).

    With 4 drives SATA a a RAID at least 128 MB card cache, you can run good VMs 6-8

    André

  • Changing the Mode of EVC Cluster for guests of Intel

    We cross a turnover of rental for our ESX host that puts out some old CPU architectures. Once we get rid of these hosts, we will be able to raise our EVC Cluster mode.

    (1) once ready, are there special precautions to take before changing the Mode of EVC Cluster? Then I just change the setting?
    (2) when the VMs will begin taking advantage of the new architecture CPU (a reboot will or VMs must they be turned off)?
    (3) any question with VM do not be put off for long periods of time after the VCA mode change?

    (4) all other things to worry about?

    Is that you turn off and then turn on the virtual machines. A reboot of the guest operating system is not enough. A virtual machine determines which functions are available to turn on and cannot access all the new features that are added until the power is turned off.
  • install ESXi on an existing machine under windows 2003

    Hi all

    I'm new to VMware and I just installed ESXi on a machine with server 2003 installed. My questions are:

    1: can I still access my windows 2003 server, bypassing the connection of ESXi? If so, how? If not, it means that after I had installed ESXi on this machine, Server 2003 is removed.

    2: How do I reinstall the ESXi on this machine?

    I converted two of my physical servers into virtual machines using the converter. And my questions are:

    1: after you import the virtual machine, I deleted it from the VMware client. This particular virtual machine is no longer visible but still displays taking up resources such as HDD, CPU, RAM etc. How to release my resources?

    2:i have two network cards in the physical server, and when I've converted and brought it into a VMware customer, everything is ok except the network cards. They show that some cards AMD NIC. I'm not able to use network cards. And I already tried to convert twice i just cases that something went wrong with conversion. but the problem remains.

    Thank you.

    AG

    As the other poster mentioned, (ESXi and ESX) are installed bare metal - they install their operating systems, so I think your Win2k3 installation is missing if you have it installed on the same disk.

    When you removed the VM you remove disk or delete forminventory - if you have removed the inventory and it was running, it will still resources - for the correction of network cards virtual you need to install VMware tools - this will load the appropriate virtual machine drivers and it will improve your performance - up to this virtual material of your virtual machine will be identified as a physical hardware as the AMD PCnet Ethernet controller-

    If you find this or any other answer useful please consider awarding points marking the answer correct or useful

Maybe you are looking for

  • My iPod Classic retains a break himself

    My iPod Classic keeps pausing itself randomly while I'm listening to music. I had this problem before, and it is fixed using different headphones. However, I'm tired of having to buy new headphones (I use headphones to Apple, which is said by the way

  • Formatting of e-mail response changed after installing Enigmail

    When you reply to an email, the answer is entered/typed is sheathed line much shorter than the original e-mail remotely. This moved not before installing Enigmail. Unable to find a framework that could affect it. Look at a message to the Original HTM

  • Satellite C70D - impossible to unlock the mouse pad

    Hello My mousepad doesn' works as it should. I tried to unlock with FN + F5, only F5, FN + F9,... but nothing helps.All I can do is move the cursor and use the mouse pad when it keeps the left mouse button at the same time.Someone at - it a solution?

  • Use attributes TDMS in VBscript DIAdem

    Greetings, I wrote the data set such as TDMS attribtutes properties and I would now like to call these attributes as variables in VBscript DIAdem.  I searched that help still does not find the proper syntax to call a PDM attribute. Thank you!

  • Pavilion HP P6680t dual monitor question

    Hey, I have a Pavilion p6680t with a GeForce Gt 420 card and I want to be able to use both screens. This is what looks like the back of my computer. http://I956.Photobucket.com/albums/ae42/demonex/20130613_173736_zps9b222224.jpg I have my secondary m