key control (ctrl) and scrolling problem

Key control (ctrl) zooms window can not copy, paste, etc. using the function without the Zoom window key before, this does not happen with other browsers, it started about 3 weeks, possibly after the last update of firefix, windows 8

When I scroll down a page, it automatically rises to the top. Not sure this is strictly related to Firefox.

Modification of the foregoing did nothing for me (restarted my browser to make sure) If update the following to 1 (let's me still use the mouse wheel to scroll the page) worked like a charm

Subject: config > mousewheel.with_meta.action > choose one of the following:

0 (disabled)
1 (scrolling content)
2 (move backward/forward your story)
3 (by default, zoom in/out)

Tags: Firefox

Similar Questions

  • Control (Ctrl) and function (Fn) keys are exchanged on the ProBook s 4530. How can I restore it?

    I have the HP ProBook s 4530, who worked as expected i.e. keys Ctrl and Fn keys work properly. Now somehow these two keys are reversed and I want to restore as well as Ctrl Key functions as Ctrl key. Please note that I am running Windows 7 on this computer. How can I restore it?

    Finally I could solve the problem by following the steps mentioned below:

    1. Switch off the machine
    2. Removed the a/c power and battery and waited a few seconds
    3. Attached battery and put on the machine...

    and the problem was solved!

  • Satellite L505-13W - FN keys were not and touchpad problem

    Hello everyone,

    I have two questions and I'd highly appreciate your help.

    First, when I got the laptop he used to have a Fn bar that comes down from the top of the screen when I press the Fn, it shows all the keys Fn, now it disappeared. I need to get it back, I almost tried everything and nothing is there yet.

    Second, the touchpad is a zoom no more when I apply the 2 fingers in and out, he used to do that before.

    My laptop is Satellite L505-13W

    Thanks in advance

    Hi abdouni,.

    1. I think that the problem is related to Toshiba Value added Package, and Flash Cards Support utility. These two tools control FN keys and cards Flash appears if you press the FN key.
    You can download it from the official website of Toshiba:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    Regarding the installation: first remove these two tools and reboot the laptop. Now, install the package of added value and stop and start again. Install the Flash Cards Support utility and do a restart. Now, the FN keys should work again.

    2. it could be related to value added package too to check my ad.
    If it s does not work, reinstall the driver for the touchpad.

  • Pavilion 15-ak006nc (ENERGY *): keys to Action and touchpad problem

    Hello

    I just bought new HP Pavilion Gaming Notebook - 15-ak006nc (ENERGY STAR) with W10 home x 64.

    In the beginning, I have problem with action keys. They are as default, so when I press F5 to refresh something, it turns on just the keyboard lighting and for updating I have to press the FN + F5 key. Is it possible to pass it for action keys, I'll need to press the FN button and not for normal F-keys? (I used them a lot - F2 rename, alt + F4 to close etc..)

    Second question is about the touchpad settings - after each restart/on the machine, I have to change the settings, or load saved profile with my custom settings. Y at - it an option to change the default settings?

    Thank you very much!

    Hello

    About the f key, you can change this as follows.

    Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the Bios ( f10 ) option, and then change the figure in the document at the following link.

    http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c02035108&DocLang=en&docLocale=en_US&JumpID=reg_r1002_usen_c-001_title_r0002

    To fix the parameters of the touchpad constantly being reset, try the following.

    Hold down the Windows key and press R

    In the run box, type regedit and press enter

    In the registry editor, navigate to the following

    HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

    Inside, look for a key named DeleteUserSettingsOnUpgrade

    If it is present, right click on the key and select Edit

    Set the field data of the value 0 (zero) , and then click Ok.

    Close the registry editor.

    Make the Synaptics setting changes you need in the usual way and save them, and then check if they are now kept after a reboot.

    Kind regards

    DP - K

  • VerticalField Manager Custom Image display and scrolling problem

    I have the following code, which does a great job to display my buttons and text in my 8530.  The problem I have is when I view it on another phone the image goes all the way to the bottom of the screen (for example on a 9550 sim card).  When I add the value of Field.USE_ALL_HEIGHT that the image goes all the way to the bottom of the screen, but when I scroll down to close I see lots of whitespace below of the image with the button close all the way to the top.  I tried to create a manager of sinople not floating with the background image and put the buttons on a second, assigning it to the first with no luck.  How can I get so there is not any white space below the image? Thank you

    ///////////////////////////////////////////////////
    Creates the button and the text on the main screen
    VerticalFieldManager vor = new VerticalFieldManager(Field.USE_ALL_WIDTH |)
    VerticalFieldManager.VERTICAL_SCROLL |
    VerticalFieldManager.VERTICAL_SCROLLBAR |)
    {
    Override the paint method to draw the background image.
    public void paint (Graphics graphics)
    {
    Draw the background image, then call super.paint to paint the rest of the screen.
    graphics.drawBitmap (0, 0, Display.getWidth (), Display.getHeight (), bgImage, 0, 0);
    Super.Paint (Graphics);
    }
    };
                               
    LabelField para_1 = new LabelField ("mark your location, then"+ ")
    'generate a route back to this place.
    LabelField.FIELD_HCENTER);
    LabelField para_2 = new LabelField ("* you must Access to GPS *")
    LabelField.FIELD_HCENTER);
    vFM.add (para_1);
    Fnt font = this.getFont () .derive (Font.BOLD);
    para_1.setFont (FNT);
    vFM.add (para_2);
    vFM.add (viewCurrentLocBTN);
    vFM.add (viewMarkCurrentLocBTN);
    vFM.add (markCurrentLocBTN);
    vFM.add (routeBackBTN);
    vFM.add (closeAppBTN);
    This.Add (vFM);
    ///////////////////////////////////////////////////

    Thankss!  After reading the reference that I realized what I had to change this

    Super();

    to do this at the beginning of the method that creates the screen

    Super (NO_VERTICAL_SCROLL);

  • scrolling problems, running of the depot, retro-typing and cursor and windows boxes freezing in the process of disappearance. Help!

    I have a dell vostro 1000 laptop with windows Vista Basic program. I aggravating problems with scrolling, on each program Web site. I have mozilla firefox, chrome, IE I started to scroll down a page and he yanks back the Summit. This also happens offline. I feel like a tug of war. The other problem is the flashing running drop boxes. When I go to lets say google and I click on the search box type it then starts flashing and hurtling previous search words. It is difficult to stop this. right now I have some difficulties to type this question because I'm going to type a few words and then the cursor disappears also a previous sentence. Sometimes when I go to type a word in the search type box the first letter and then the cursor will return to the leading space and adds the letters before the first letter of the word. I feel like sometimes I write backwards. Oh! time comsuming. It does also offline. I have a wireless keyboard and mouse that I sometimes use the mouse works, then suddenly, the page is pulled to the top and I can only It control a few times with the arrow keys on your laptop. Sometimes, this work and others do not. My AutoFill will in to fill out the forms but the name, the address box etc. will follow down the rest of the form and I do not see other issues. I tried Control Panel for mouse problems and the keyboard and settings sometimes move for the reason so I can't set some options. Can someone please help me I've been struggling with this problem for over a year.

    Hi Butterfly3,

    Welcome to Microsoft Vista answers Forum!

    ·         Does the problem occur even when working with other programs such as WordPad and Notepad?

    (A.) it can happen that if drivers are not updated, you may update the drivers for keyboard and mouse on your machine, see steps to update the drivers:

    (i.) click Start > type in Device Manager in the start search > expand the keyboard and the mouse in Device Manager > right click on drivers > click Properties > click on the driver tab > click on update drivers > click OK.

    Now, restart the computer and check if the keyboard and mouse works fine without any problems.

    (B) if the problem persists, you may need to perform the analysis antivirus on the computer.

    You can also perform a complete analysis of the Service from the link: http://safety.live.com

    A.) you can also check by reducing the hardware acceleration on your computer, follow the steps below to reduce hardware acceleration:

    (i.) click Start > click Control Panel > click on appearance and personalization > click personalization > click on display settings > click Advanced settings > click the Troubleshooting tab, and then click on change settings.

    Note: The settings will be disabled if the graphics card driver does not support disabling hardware acceleration.

    Move the hardware acceleration slider until it is one notch to the right of none. It is the basis of acceleration.

    Click OK twice, and then close the window.

    (B) I suggest that you might have to reset the internet settings explorer explore on your computer, download the Microsoft Fix - it of the link which automatically resets the default browser settings, see the link: http://support.microsoft.com/923737

    Hope this information is useful.
    Let me know if it worked.
    All the best!

    Thank you, and in what concerns:
    Swathi B - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Key control and command key in Lion mountain/Fusion 5

    The behavior of the control and command keys have changed with the Mountain Lion and Fusion 5. I don't know what changed the behavior change, but I'm looking for guidance. More specifically, in my Win7 clients running Outlook 2010, I used to be able to enter a meeting in the calendar, hold down the control key and copy the meeting to another time/day. That no longer works.

    Secondly, when I click command + tab to scroll through all my open programs on the host Mac computer, start of Win7 menu opens automatically. This never used to happen.

    I tried tweaking the mappings of keys and the behavior of the mice, but can't seem to recreate the behavior I had on Lion/Fusion 4.

    Have you tried ctrl and the alt key at the same time.  It works for me.

  • Sierra: key control and command swap?

    Hi all

    I use the option to swap the keys of my command and control, but it does not work on my 5 k new Imac. It did not work in El Capitan. I have already reset the NVRAM but no luck, the control keys keep order and even for my control keys. Bug?

    Kind regards

    Peter

    Thank you for using communities of support from Apple, PeterWeter!

    Congratulations on your new iMac! I see that your iMac on macOS Sierra is not allowing you to change your key options. Since I have been hit most of my adult life, is not able to use any key how I need you would slow me down.  I'll be happy to help you.

    Try safe mode if your Mac does not start -boot in safe mode is a great way to make sure that everything starts correctly.

    What is safe mode?

    Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs certain checks and prevents certain software from loading automatically or opening. From your Mac in safe mode does the following:

    • Check your startup disk and attempts to fix problems if necessary directory
    • Loads needed kernel extensions only
    • Prevents elements start and the login items open automatically
    • Disables the user installed fonts
    • Delete font caches, hiding the kernel and other files of the system cache

    Once your iMac starts up in safe mode, you should be able to define the keys on your keyboard as you want.

    See you soon!

  • How swop keys Ctrl and Fn?

    My laptop HP Compaq nx7400 has its keys Ctrl and Fn exchanged. How can I set it right?

    Hello

    The priority of the Fn key is usually changes in the BIOS. I recommend you contact the manufacturer of the computer on this issue.

    Note:
    Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
     
     
    I hope this helps.
  • How can I turn off the beep sound on Num lock, cap lock, and scroll lock keys

    How can I disable the beep on the cap lock NumLock and scroll stop?

    There is a good chance that you can turn off the beeps by pressing the NumLock key for a little more than 5 seconds. Here's where the ToggleKeys setting are stored.

    Go to the Ease of Access Center Control Panel and click make the keyboard easier to use.

    Search for Activate the ToggleKeys in the section make it easier to type and uncheck Activate the ToggleKeys. You can uncheck turn on ToggleKeys by pressing the Numlock for 5 seconds more.

    Be sure to click on OK endangered.

    Addendum: more information in the Microsoft Accessability tutorial.

  • left side ctrl key, ESC, f1 and f3 keys stop working all of a sudden.

    Hello

    I have a problem, I have laptop Sony vaio SVE15114FXS and since before yesterday my laptop on the left side ctrl keys key, ESC, f1 and f3 stop working all of a sudden, I tried a lot of things to understand tht y the problem give but without no result found. I restored my laptop and reinstall the keyboard drivers too for this problem, but still its giving me same problem, please help me and make me this problem.

    shereenkhanzada,

    If you mean restore as in a factory restore and the keys are still does not the device will require repairs.  If it is a model of the United States please call for Sony Support @ 800-222-7669 so they can trouble shoot and set up for service if required...

  • Problems with clicking and scrolling when you are using the mouse in IE

    Separated from this thread.

    Original title:

    Problems with clicking and scrolling when you are using the mouse

    I have the same problem.  My touchscreen responds but my touchpad and mouse are unable to save a click in IE.  I need to reboot to rectify.  It seems to be more common when the laptop comes out of fashion 'sleep'.   I tried all the steps above, everything is up-to-date.

    Hello Fred,.

    Thanks for the reply.

    I appreciate your efforts to resolve the issue.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run the hardware and devices Troubleshooter and check. Please follow these steps:

    a. press Windows + W keys, type Troubleshooting in the search box and press on Enter.
    b. click on 'show all' and then click 'hardware and devices'.
    c. click 'Next' and then follow the on-screen instructions.

    If this does not help, then use method 2.

    Method 2:
    Start your computer in safe mode and check the number.
    Refer to this article:
    Start settings for Windows (including safe mode)
    http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Expansion or dé - one screen with CTRL - and CTRL + breeze a div in iframe in a containing more or less random ad. These keys have other meanings?

    In Internet Explorer, Chrome and torch pages can be increased / decreased at will by using 'CTRL -' and ' CTRL + '. Not the case in Firefox.
    It breaks a line a line with photos randomly. The right picture more moves to the left underneath, as if the div becomes smaller.
    But a second or a third or a nth CTRL-/ + fix the situation. You can see for yourself on www.vakantiehuiszonneweelde.nl
    The site is a "margin: auto container ' with navigation header and a content div. The problems occur within the content DIV. In one page, I use a lib (sort of lightbox) Magicthumb. This lib is the troublemaker?

    A good place to ask for advice on web development is the forum mozillaZine 'Web Standards Development/evangelism'.

    Aid to this forum are better informed on issues related to web development.

    You must register on mozillaZine forum site to post in this forum.

  • Remote control stop scrolling left and right while he needed video first put in pause and scroll any help?

    Remote control stop scrolling left and right while he needed video first put in pause and scroll any help?

    It was an update designed by tvOS 9.2 to the user of the address which have been accidentally scouring...

    http://www.CultofMac.com/420160/scrub-through-video-on-Apple-TV-in-TVos-9-2/

  • Keys CTRL and FN suddenly swapped [here 8460p]

    Hello

    the keys CTRL and FN from my laptop suddenly traded.

    The FN key is now running the CTRL key and vice versa.

    I first thought that the CTRL works at all.

    It's really annoying.

    Possible to change back to the default behavior, or is it a case of warranty?

    Thanks & best regards,

    Philipp

    People with the 4530 series ProBooks found by removing the battery and current alternative, then re-marketing seems to solve this quirk...

Maybe you are looking for