Key records is not on Satellite C660

Similar Questions

• Shortcut keys work only not on Satellite 1800

  Hello

  just started place & my 3 quick access keys work! entered in the "toshiba controls", "internet" & "outlook" are assigned to the keys 1 & 2 but nothing happens when you press. clues? I have re-installed the driver controls by but once again not good
  deploy the satellite 1800-412.
  curious...

  Hello

  First of all, you should check if the buttons are selected. (Is selected)
  Then check if the option has been selected for the simple buttons.

  Very important is the installation of the common modules. Without this additional demand it possible s Toshiba controls will not work.
  You must install first the common modules, then the controls.

• Shortcut keys work only not on Satellite M35-S456

  I have windows xp pro installation, and my shortcut keys do not work? Please, I beg you. (I installed the hotkey software)

  Hello

  I put t know how exactly American books, but please do not forget that you have installed the common modules first. This is the basic tool and must be installed before you install the other stuff of Toshiba.

  I also hope that you download everything you need from the download page

• Recovery CD does not retrieve Satellite C660-1WN

  I ordered a set of 2 CD from Toshiba Recovery and they received yesterday in order to correct this laptop Windows depression...

  [http://www.toshibamea.com/ComputerProduct/4/Satellite_C660-1WN/49674?pageid=4]

  The problem at the beginning upward is that Windows 7 is not implemented, more that does not show the drive in the BIOS (the fact DVD player) and after the boot sequence the following message appears: Reboot and select proper boot device or insert media root in the selected boot device someone suggested the drive is broken or the cables to the same loose or lose.

  The owner said, that the error appeared after McAfee offered to "remove 15 errors found on the disk." The laptop has never been opened.

  What recovery CD 1 the sequence start starts the recovery but initially shows two pop-ups that indicate that the hard drive is not found.

  First error message - ERROR: IOCTL_DISK_GET_LENGTH_INFO. \PHYSICALDRIVE0 the device is not ready.

  Second error message says something like - there is no access on disk 0 # or the RAID configuration is not correct!

  After agreeing two messages, the guest turns the error that appears also in this thread...

  [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=52088]

  .. .and stops on this line...

  System32 X:\ Windows\ >

  .. .the including recovery failed.

  I fooled with the tips in this thread...

  [http://superuser.com/questions/318322/how-do-i-fix-my-mbr-when-windows-7-system-recovery-shows-no-drive]

  .. .or there are a few commands that show the State of the disk. Using the list disk drive I can find the drive that shows however that it doesn't have a drive letter designated, where the State is without media and size values and free is of 0 bytes.

  Verify the information of partition, the partition for the the DVD (volume 1) is active and mounted and - apparently - the hard disk (volume 0) shows that there is no label, where Fs holds no information Type is listed as removable, size is 0 bytes and status without media.

  I then tried to assign the letter F on the hard drive which has not had a letter attributed to himself and who has been reported as a success, but after another reboot and trying to run the recovery cd, even for the first method distributed everywhere with the drive not showing...

  Post edited by: safesite

  If I understand your posting right, THAT HDD is troublemaker, so I think you should get it again or another HARD drive, set the BIOS to the default settings and try reinstalling the recovery image.

  If possible, do this and post the results.

• Satellite C660 - the SHIFT key does not work

  Hello

  I have a problem with a Satellite C660.
  The keyboard, I cannot use the SHIFT key. After you have installed windows everything worked properly, the problem recurs after a few days. Practically the SHIFT key does not work.
  On the one hand I'm the A and the other side works like ESC.

  Help me I'm crazy.
  Thank you.

  Hello

  To me that sounds more like a keyboard failure, I can't imagine that it could be linked to the question of the windows operating system do you have tested an external USB keyboard.

  Please test this. In this case, you can check if it s really a software problem.
  If the USB keyboard works correctly, it means that your internal keyboard is malfunctioning.

• Satellite C660-B080 - FN key does not work with Win 7

  Hello

  My laptop model is' satellite C660-B080 & only part no = 'PSC0SV-02G01JAR' with windows 7 Ultimate 64 bit SP1

  I downloaded the driver from the website, but the FN key does not

  Please help me with this.

  Thank you

  Must be installed:

  -Value Added Package for Windows 7 64 bit
  -Flash utility Cards with support for Windows 7 64 bit

  These two tools are located on the Toshiba driver pages.

• The function in my Satellite C660 key does not work

  The function in my Toshiba Satellite C660 key does not work except volume.
  This problem appeared after I changed something in startup and programs uninstall that I can remember pvat and no support of the button appears in my programs startup :(

  Please visit Toshiba on http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp download page and download the latest package added Toshiba economical for your laptop model.

  Remove the preinstalled version, restart your computer and install the latest version.
  After doing this it works again.

• Satellite C660 - 23 M: Volume OSD works not under Fn Key + 2 or 3 using Win7

  I have a satellite C660 - 23 M and have recently reinstalled Windows 7 to get a clean install without bloatware.

  I installed the utility Support Flash Cards and value-added products and, on the whole, the functionality of the keys Fn + F OK work and give an OSD appropriate, so that we can see what happens when you use key controls.

  Unfortunately however, Fn + 3 (the volume) and Fn + 4 (increase the volume) everything works properly with regard to actually proceed with a reduction or increase the volume control, do not show a suitable simultaneous OSD that allow to confirm the effect and adjust the level of the volume actually set.

  Can anyone help with a fix/solution please?

  Maybe stupid question now, but worked it as you wisch with Win7 preinstalled original?
  I ask this because on my NB520, I use the same combination of keys, but volume OSB is not displayed on the screen.

  I can just see this symbol in the taskbar to change.

• Re: satellite C660-26Z: FN keys do not work after installing Win7

  I have a SATELLITE C660-26Z after format and reinstall a new version of windows that my function keys do not work.

  However they work until I connect and then they don't work on any account I can accidentally extinguished they if so is it possible to reactivate them? FN and the keys 1-4 works but the Fn Esc all the way to F9 keys do not work any ideas?

  Thank you

  Ben

  p.s. I have Toshiba value added package

  Hello

  You must install VAP and Flash memory card Support utility.
  The utility of Flash Cards control the FN keys.

  Install and test again

• For the Satellite C660-A219 function keys do not appear

  For the Satellite C660-A219 function keys do not appear... I formatted my laptop and installed a new Win 7 after that I lost... function keys. Please help

  Have you installed version of Win7 or recovery image original Toshiba that you got with your Toshi?
  Did you install additional package from Toshiba?

• Satellite C660-A235 - multimedia keys do not work

  I bought a new Satellite C660-A235, but I have a problem with the function keys / multimedia,.
  Use only the function keys but no multimedia keys even if I press the fn, while the other multimedia keys located wuthe numbers 1,2,3,4 as volume up and down work well with the FN keys but without notifications screen.

  Note: I installed value drivers package and flash card

  Help, please

  It s really strange. Have you noticed this problem from the first moment after you have started your laptop for the first time or a few days later?

• Satellite C660 - function keys do not work correctly

  I have a strange problem with the help of function keys. When I turn on the laptop the functions work well. However, after 30 seconds of standing on the desk, they stop. The only buttons fuction that work after that are for the volume (up and down). The brightness, the mute button, they all stop working.

  I have no idea what is the reason for this and I'll be happy to have your help.

  MODEL NAME: Toshiba Satellite C660-1MU
  PART NO.: PSC1SE-00600283
  OS: Windows 8.1

  As far as I know, function keys are controlled by the driver of Toshiba system and key function Toshiba utility and they must be active in the background (to start).
  I checked the Toshiba download page, and as I can see, your laptop is not yet supported for Win8.1. What drivers you have installed?

  Anyway, you can try to reinstall them.

• Satellite C660-2EL - Wireless n and the F8 function key does not show

  Satellite C660-2EL - Wireless works sometimes, but mostly not. Wired connection is ok. When does not not Fn 8 does not appear and the wireless card does not appear in the devices.
  Pilot was handed in place.

  Have tried reset default and many other things - yesterday was working - light today and not...

  Help!

  Hello

  If the wireless network adapter does not work or its lack in the device, the FN + F8 key combination Manager would not work.
  So the problem is your wireless network card.

  The WLan card driver is missing or malfunctioning of the WiFi chip.
  The device uses the Realtek RTL8188CE WLan card.
  Have you installed the chip RTL8188CE WLan driver?
  Make sure what you've done!

  Otherwise, if the WLan card is not listed in the Manager (no unknown device or Ethernet controller) devices marked with yellow exclamation point I guess that the module is faulty.

• Satellite C660 - USB keys are not mounted

  I have a * Satellite C660 with Windows 7 64 bit *. When I conect a USB stick (2 GB LG or other), Windows install the new USB, but after a few seconds, the USB is disassemble and assemble and disassemble some indefinitely.

  With my old * Toshiba Satellite M50, Windows XP * both sticks work very well.

  Hi mkobets,

  Probably something wrong with USB ports or driver chipset so the glue work with your old Toshiba laptop USB

  Means the simplest would update the chipset in my view driver that you can download here:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Satellite C660 - 1 M 0 - FN does not work

  I have a laptop Satellite C660-1 MB. My FN key does not appear on the top of my screen.
  I tried to uncheck that the "function key all disable them" under the map flash but it still does not.

  I hope you could help me guys.
  Thank you.

  It works in the home premium to Windows 7. Will this fix if the system restore is installed?

  The menu Flash card may appear at the bottom or top of the screen. It depends on the settings you can change in the settings of Flash Card Toshiba (all programs-> Toshiba-> Utilities)