key will not be shared on the numeric keypad

When I start my computer and try to log in to the sign in place fills up with x - are. I have Windows 7.

Looks like the keyboard is blocked or defective.  Repair or replacement will be necessary.

Tags: Windows

Similar Questions

  • T420s: how to use the numeric keypad #?

    Do not really understand how to use the numbers on the numeric keypad.

    Please advice where I can find them?

    FN - J - does not work

    Activate the numeric keypad by pressing Fn + NmLk.

    Then you have access using the number keys.

  • SpeedGrade will not meet the numeric keypad keys / partially cut 2nd monitor image

    Very strange... I just opened a project in Speedgrade. When I started working, I noticed that the keys of the numeric keypad do not work. In addition, the changes made with the mouse are delayed. Apart from that, I use a second monitor and about a quarter of the picture from the left edge is cut. First works very well, it is quite another thing, it's a brand new computer. I tried all the usual stuff like reboot I even uninstalled and re-installed, but to no avail. I use the latest version of speedgrade on a system 4790 Windows 8.1 Intel i7 with 32 GB of RAM and a card GTX 780. Does anyone have ideas, what could happen?

    Hello

    You did that the display in the window of parameters setting are set correctly? You can manually adjust the resolution of your screen in the second.

    For the delay, have you created a mask in your project?

    Thank you

    Fran

  • Envy 17 t-n100: some keys on the numeric keypad does not

    For a few months now, I could not use the /, *,-. 4, 5, 6,., or 0 keys on the numeric keypad. All other keys on the laptop works. I did a few driver updates since then for the keyboard. Sometimes after that several several presses the keys work briefly, then shut down again after a few minutes. In my view, it could be a software problem, I became unable to use the keys on the right after the installation of the application to the emulator Android of Nox.

    Solution

    For me, uninstall the Nox App Player solved the problem immediately. If someone has a similar question on any laptop model and has installed Nox, but didn't need it, I would try that

  • the numeric keypad keys do not work

    A little different problem here:

    Just bought my dv7-1030eb. On this keyboard is QWERTY Belgium (well, i live in Belgium, so it's OK)

    Unfortunately, the numeric keypad keys work except for the top 4 (home, end, pgup and pgdn).

    Result: I can not activate Numlock.

    Trying to connect an external keyboard and activate Numlock.

    On the external keyboard, everything works as expected.

    On the keyboard internal, still no light locking num (below altec lansing logo), and yet only four albums keys (home, end, pgup and pgdn) operational.

    It is also a diagnostic message?

    A reply to a message on the page, message 4 @BernsBelgium

    It is a problem, that I was just trying to solve on a dv7-1002.

    I found that the solution has been updated of the bios.

    I was on a version very early and found that I had to do incremental updates. From the one after the current bios, if you try to jump the updates, it fails to the version checks and gives an error "is not any ROM file in this directory"".»

    Keys num started working after about five updates and continued to work for the rest. I had to do about 10 updates to get the current bios. The keys are now working very well.

    Hope this helps someone else.

  • Vista will not start. Verifying the integrity of system files and repair has no ErrorCode = 0 x 2 HELP PLEASE!

    ASUS PC, Windows Vist Home premium, all updates.

    Out of the blue, it will not start.  Access the start scrolling (the one just before logon) screen and it just stops.

    Twice I ran Vista check utility.  The first time, I chose to do the system restore to previous state.  Restarted.  Always off.  The second time, it took much longer and from what I can see.  All TESTS PASS, except one:

    Repair action: repair and checking of the filesystem Integrety

    Result: failed. Error code = 0 x 2

    Time required: 6206818ms

    I get no blue screen, I can't even any screen!

    I'm triying to repar because I have several costly software titles that link the authorization key code to a key hardware and software installation.  I don't know that I could reinstall if I get a code (randomly?) different generated software.

    I don't know about i-tunes and other content downloaded my wife has such as MP3 files and audio books.

    Thanks for any help!

    The test fails (SFC) checks for corruption in the files on your system.  If she can't even complete, she suggests the Vista all system needs to be re-installed - but you have already done this and you still have the problem.

    In fact, look like a hardware problem.  Here are some troubleshooting guidelines hardware that can help (but probably not for this question as what you really need, it is a replacement for test):http://elephantboycomputers.com/page2.html#Hardware_Tshoot.  Frankly, I think it's time to take the system to a repair facility of good reputation for the service computer (or to return to the manufacturer for repair - costs, schedule, guarantees and make a decision).  I don't know what hardware component.

    If you can, try to back up your data before you import it it because they will probably wipe the drive clean during the process. You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (perhaps done on another computer).  This should give you enough access to the system (if you do not have any other means) to backup your important data.  Otherwise, try slaving the drive to another system and access the data in this way.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows vista home basic original dics32bit sp1 product key will not work say code invalid disc P/N N353G

    Windows vista home basic original dics32bit sp1 product key will not work say code invalid disc P/N N353G

    I reinstalled my windows vista.made a clean install removed windows xp sp3 when I try to activate my windows vista Home Basic sp1 it say not validates the code supplied with the disc, the code is below my laptop and the cd is in the package with my laptop, I used the key once when I re-installed my operating system once and it worked perfectly

    If you get this message before you try to turn it on, it means generally that you must not read or wrong entered the key.

    Use a magnifying glass and a bright light to read the key (or ask someone else to read it for you)

    In particular check the characters B/8 and G/C/Q.

  • Installed Windows Vista Basic instead of Home Premium and now my product key will not work. What can I do?

    I have purchases product code for Vista Home Premium. I couldn't find the disk, so I installed Vista Basic. Microsoft does not authorize the premium code to record the "basic" program How can I get the two to work together on my machine? MS will not let me get the program of upgrading without registering to the basic version... and on, and it will.

    original title: update windows

    Hello

    Microsoft is correct; you need the correct product key for each specific edition of Vista.

    These information from Microsoft about replacing lost software should help you:

    http://support.Microsoft.com/kb/326246

    Then you can install it properly.

    See you soon.

    PS If you use a Microsoft Vista DVD, which contains the files for the different editions of Vista must be installed. The product key determines which Edition is installed.

    Builders recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as well as 32-bit and 64-bit editions different DVD lights.

  • computer keys will not type

    Hi all

    I have a hp56 and some of the computer keys will not type - y at - it an easy solution anyone who knows very little about computers can do?   Thanks, Paul

    Hi Paul,.

    This could be a hardware problem, but it is always worth trying the following.

    Open windows control panel, open Device Manager, expand keyboards, right-click on the "Standard PS/2 Keyboard" entry and select uninstall.

    Shut down the laptop - if you're running Windows 8/8.1, do it by holding down the button SHIFT left click Shutdown to temporarily prevent a hybrid boot.

    Then disconnect the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Kind regards

    DP - K

  • "s" key will not answer

    "" A week ago I started having some i s Edition with my "s" keys on my laptop (hp pavilion dv5) keyboard. It stop working for a few minutes, but after that I removed the key and cleaned under it, she started responding again.

    Now, the key stopped working altogether (I was able to type teas's in this mesh in. by copy - paste).

    I have not spilled something on the keyboard and this i s the only key that is not appropriate.

    The key will not work on the keyboard on the screen.

    I don't know if this I s a pilot is known or if it is simply a problem with the keyboard itself.

    Any help would be appreciated. Thank s.

    Try an external keyboard.  If the "s" key works on it, then it is almost certainly of a mechanical problem with the internal keyboard.

    "airekuh" wrote in the new message: * e-mail address is removed from the privacy... *

    "" A week ago I started having some i s Edition with my "s" keys on my laptop (hp pavilion dv5) keyboard. It stop working for a few minutes, but after that I removed the key and cleaned under it, she started responding again.

    Now, the key stopped working altogether (I was able to type teas's in this mesh in. by copy - paste).

    I have not spilled something on the keyboard and this i s the only key that is not appropriate.

    The key will not work on the keyboard on the screen.

    I don't know if this I s a pilot is known or if it is simply a problem with the keyboard itself.

    Any help would be appreciated. Thank s.

  • A single hard drive will not be shared on network. All other players share very well.

    A single hard drive will not be shared on network.  All other players share very well.  Don't have a homegroup installation because I also have XP machines.  The drive is on a windows machine 7.   I checked all the settings.  Of course, all the machines are on the same workgroup.  It's just 1 road.  The other 5 on this computer share very well.

    Hey Timmy,

    Welcome to the Microsoft Community and thanks for posting the question.

    According to the description, player does not network share.

    The problem may occur due to some network settings.

    Perform the steps from the link below and see if it helps.

    http://Windows.Microsoft.com/en-in/Windows/sharing-files-printers-help#sharing-files-and-printers=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Hope this information helps.

    Answer to us if you are experiencing problems with the sharing network or any Windows problem, and we would be happy to help you.

    Good day!

  • Zero on the numeric keypad does not work

    I use windows 8 and press zero on the numeric keypad does not work.  It is used to work and then just stop.  All solutions?  All the other numbers work very well.

    Thanks for any help.   KP

    I've seen other people talk about that here on this site, and in all cases so far, it's the "fn lock" or "function" on their keyboard (usually a laptop keyboard).  The zero key is used for anything else until you disable the lock feature.

    Example on the web:

  • iPhone will not be displayed in the finder

    I'm trying to move some of the photos from my phone to a file on my computer and my phone will not be displayed in the tab "currencies" in the finder. It's an iPhone 6 and it is connected through the USB port. I know this isn't an error connection because when I plug it in it costs and is trying to import my photos in the section 'photos' from my computer. I went into the settings in the finder and all turned on and it will not always be displayed. Why is this?

    Because Apple has decided that OS X is smarter than you and me. They removed this option on the latest versions of Mac OS X (my devices do not appear more, grrrr...). Try instead to use Image Capture and import or remove photos from there.

  • Apple os 9.3.3 charged down behind my back and now my i phone will not open most of the apps because there is not enough memory.  I see that I have 40 GB of memory left on the cloud over 50.  Question, how can I use my pc to see what has been done

    Apple os 9.3.3 charged down behind my back and now my i phone will not open most of the apps because there is not enough memory.  I see that I have 40 GB of memory left on the cloud over 50.  How can question, I use my pc to see what has been downloaded on the cloud?

    Your question has nothing to do with iCloud. You should remove unnecessary data from your phone to free up about 10% of your phone's storage space.

  • Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

    Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

    Would you like to share why you must do a clean install?

    You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.

    Computers that can be upgraded to use OS X Internet Recovery - Apple Support

    PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.

Maybe you are looking for