key Windows 8 for the new installation on windows 8.1
Hello
Anyway we can use key windows 8 to install windws 8.1 fees
Thank you
Hi Imran,
You can't use the product key Windows 8 If you perform a new installation of Windows 8.1. The recommended method is to install Windows 8 and upgrade to Windows 8.1 by store. You can use the upgrade product key to Windows 8.1.
For more information, see this article.
Updated to Windows 8.1 : FAQ
http://Windows.Microsoft.com/en-AU/Windows-8/upgrade-to-Windows-8
Hope this information helps. Response with status so that we can help you.
Tags: Windows
Similar Questions
-
Need hardware for the new installation of R12 (12.1) under Linux
Cheap DBA
Kindly advice me the hardware, CPU and memmory for the following specifications for the new installation.
100 users.
500 GB Production database
Application of Production of 500GB
500 GB of Test instance.
Linux operating system.
Oracle R12 Application application (12.1)
No configuration RAC and DR.
Best regards
SG.PGO
Please visit the links referenced in this thread.
Sizing
Re: sizing...Kind regards
Hussein -
I have re installed windows7 and product activation key is not accepted. Message says key is valid only for the upgrade. What should I do now?
Skip entering your product key Windows 7 and complete the installation.
When you reach the desktop, click Start, right-click on computer
Click on properties
Scroll down to the Windows Activation
Click the link x days before activation.
Click on the link that says: "show me other ways to activate.
Enter the product key
Click next
Select the Activation of the phone
Click Next when you enter your key page
Select your country
Click Next, call the number listed
Be sure to explain your situation to the Appeals Officer.
Provide the installation generated when ID requested by the call agent
They give a confirmation ID in return, enter it
Click next to complete the activation.
However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.
15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.
So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.
OR
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
News of connection fails for the new installation of Windows 7
I just got a Lenovo Thinkcentre this morning and I carefully walked the first windows to connect. I put my password and checked every box because there is no way to see when I put. I put in an indication of password. I continued and continues. After going through the rest of windows, I got on the desk, and applied Windows updates. When it was finished, I rebooted the computer.
I can not connect to the computer using the information I carefully typed in at the beginning. This is the second time that this is happening so I know I've been very careful. I was unable to save the last computer and I wrote something wrong chalked it up to me, so I reformatted it. What could go wrong? I tried "Admin" as user name and I tried I got in the beginning of the name of the computer.
I just got a Lenovo Thinkcentre this morning and I carefully walked the first windows to connect. I put my password and checked every box because there is no way to see when I put. I put in an indication of password. I continued and continues. After going through the rest of windows, I got on the desk, and applied Windows updates. When it was finished, I rebooted the computer.
I can not connect to the computer using the information I carefully typed in at the beginning. This is the second time that this is happening so I know I've been very careful. I was unable to save the last computer and I wrote something wrong chalked it up to me, so I reformatted it. What could go wrong? I tried "Admin" as user name and I tried I got in the beginning of the name of the computer.
Try to reinstall Windows and configure the account again, and after reaching the office, create a backup account.
In addition, for security reasons, enable the administrator account.
Reinstall Windows 7:
Using the recovery partition to reinstall Windows 7
Step 1
Restart the ThinkCentre and repeatedly press the "F11" key like start the computer to the top.
Step 2
Watch a message on reboot telling you press F11 to access the product recovery program. Quickly, press the "F11" key when you see the message. If you do not see the message, you do not have a recovery partition on your hard drive and must instead use recovery discs. Once you enter the recovery mode, either by pressing 'F11' or booting from a recovery disk, the ThinkCentre shows main recovery screen.
Step 3Follow the prompts to choose your recovery options. Use the settings by default unless you want to customize the recovery. You can choose options such as full recovery ',' "Content factory" or "Restore my hard drive to the original state of the plant," according to the particular ThinkCentre model.
Step 4Insert new disks when you are prompted if you restore DVDs.
Step 5Click 'Yes' when prompted to restart the computer. From this point, the recovery process is completely automatic. Your computer restarts several times, and the whole process takes sseveral minutes or more. Once installation is complete, Windows displays the configuration for a new user screen, as if the computer comes out of the box.
Step 6Complete the installation of Windows by entering in your language, regional settings, network settings and the Windows user name. You may also enter your Windows product key, which is on the DVD provided with the system, or on a sticker on the computer.
--------------------------
If this does not work, contact technical support
replacement of http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do and demand
Create an extra account:
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
Activate the administrator account:
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html
-
Hi, very new for the virtual machine. I need help on what type of software (vmware), need and the first steps of the installation.
Current configuration: a portable 3 separate HD, 1 computer = Windows 7, 2 = XP, 3 is Linux RH. I have manually swap HD to work on each operating system.
Req: A laptop with Windows 7 as main OS and two other OS (XP and Linux) Guest.
(1) I prefer not to install OS and the entire application again for the guest operating system (XP and linux), will like to convert, copy, etc.
(2) can I install multiple OS (XP) for testing of applications and then delete them?
(3) can I use a different version of an application in a guest operating system?
The software that I need to buy:
VMware workstation 7.1
Version of the converted VMware? (this may be free, I think)
ThinApp 4. ???
If these are vmware software that I need is a step by step installation, in particular of the convert.
Thank you, ralph
Hi Raoul,.
Welcome to the forums.
VMware vCenter Converter Standalone is a free download that is accessible to everyone, so you can use it to convert your existing machines.
For testing purposes, you can create a virtual machine "or" with all standard applications, and then use the function 'linked-clone"of the workstation. In this way, you can have several machines quickly with the same basic configuration to test different applications.
It is more complicated to have multiple versions of the same application in a single virtual machine. ThinApp seems to be the solution, but it should require the application packages (I have no experience with ThinApp) construction. It's a bit complicated just to test. Way the easiest would be to create a new virtual machine for each version of the application.
Workstation and the converter are very easy to install if you use a standard configuration.
Good luck.
Concerning
Franck
-
Missing drivers for the new installation of XP SP 3 on HP Pavilion 500-202eo
Hello.
So I tried to make XP SP 3 to work on my new desktop HP Pavilion 500-202eo. I have partioned the disk in two and was able to install and modify Windows 7 on the other partition, largely with the support of the HP drivers for my model successfully. However I have not found any support for XP drivers for this model, or any other similar models in the 500 series with APU AMD A6 material - 6400 k Radeon HD graphics card. Installing XP went well, but I'm not having any sound, internet or USB 3 support options. In Device Manager, the following components are marked in yellow with the error code 28:
Audio device on High Definition Bus Audio
Ethernet controller
Network controller
SM Bus controller
USB controller Universal Serial Bus
Video controller VGA compatible
I tried to install the drivers Realtek for XP at least addressing the absence of sound, but it doesn't seem to make a difference, and when I point the Add Wizard of material on file with the drivers Realtek he says that it cannot find the correct drivers. You have any suggestions where I can find the software needed?
Hello:
I doubt that you will be able to do all this work, but that's...
Your PC has the IDT audio controller so the Realtek audio drivers do not work.
First install the AMD chipset driver and restart. You want the first file in the list.
Graphics: See if this driver works...
Ethernet: DL and install the driver Windows of the 3rd group of ethernet cards (pilots AR816X QCA817X family). It would be the last driver in the section.
http://www.QCA.Qualcomm.com/resources/driverdownloads/
Try this driver for the wireless card:
Audio: See if it works...
Scroll down to the bottom of page to:
IDT_HD_Audio_6469_xp_win7_win8.ziphttp://www.driversguru.com/HardwareID-HDAudio---FUNC_01-_-VEN_111D-_-DEV_76D9-_-SUBSYS_103C3387
All audio drivers it try also.
If the chipset driver above does not install the smbus controller, I enclose the smbus controller below in attachments driver files. Download and unzip the file.
Go to Device Manager and click on the smbus controller device. Click the driver tab. Click on set to update driver, and then select manual search method. Select disk, and then locate the file you unzipped\SMBUSamd
-
Portege Z930 - 14 X - need key for the new installation of Windows 7
Hello
our company bought a Toshiba Portege Z930 - 14 X, and it is necessary to do a clean install of Windows 7.
Unfortunately there is no key working Windows 7 can be found anywhere on the unit.
I read the installation key, but the key is not supposed to be activated, so does not work for a clean install.There is usually a sticker of license at the bottom of the device, but this laptop has nothing.
So, where can I find this Windows 7 key?
Kind regards
GSUs> Unfortunately there is no key working Windows 7 can be found anywhere on the unit.
If you want to use a clean Windows system, you must purchase the MS Windows disk containing the serial key.
Toshiba laptops are preinstalled with Toshiba image containing the OEM version of the Windows system and drivers. This image is already enabled. The series key isn t necessary. -
Registration key for the new installation of Windows 8
I had to reinstall my Windows 8. I bought two copies way back for $40 each and have the registration code for both sent to me by Microsoft in an e-mail message. The first I tried to use it says it had expired? The other, they said it was used on another PC. Well, it had been used on the machine I had to re - install on. I have been authorized to install with this key, but I figured once again, that it is used on another computer.
They suggest that, if this is the reason why, contact them by phone by giving Installation ID. I live in Thailand and not to use the phones as rather deaf at the age of 80 years and have no idea of what is Installation ID.
I'm really just a question if there is any other way I can give MS the information they need, such as electronic mail. Tell them that it is in the same PC?
Any help to clarify this and give me an honest man once again, very much appreciated.
Malcolm bath
PS I have the original emails give me the registration codes.
Hello again Ramesh,
It seems that my problem is solved. Later windows preview 10 increased loaded today and he said now I'm activated.
Thank you very much and sorry to have bothered you.
Concerning
Malcolm bath
-
Don't know password for the new installation of Windows 7 Ultimate on VmWare Fusion
I bought Windows 7 Ultimate 64 bit and installed on my MAC OS X machine in VmWare Fusion of an image file provided by the seller of Windows 7. However, when I start the merger, there is a 'user' set up account, and it asks for a password. Typing in anything doesn't work, or 'guest', 'user' or 'password '. So I can't past the login screen.
What can I do?
That was my mistake, and I 'found' the password trying my MAC password. This was extracted automatically, or if I entered during installation without remembering, I don't know. In all cases, it is resolved.
I can't mark my own reply as 'Reply', nor can I delete this question :-(
-
Activate email for the new installation of windows 7 Home premium software
(1) install windows 7 premium homw today. Not have an e-mail software included.
(2) computer is a laptop HP G70 - 467 CL
(3) my internet provider Comcast - my eamil address is * address email is removed from the privacy *
(4) my phone number is 904 284-8546
(5) need help to hang internet and email services
You can download free Windows Live Mail software or third party alternative:
-
How do the users of old installation folder be available for the new installation?
When I installed Windows 7 (x 64) the last time that I moved the users on another partition folder to prevent the get cluttered with C:. A year later, I reinstalled Windows by only formatting system partition and I still have the old user folder on my D: partition.
The question is: How can I make the old folder users be current users folder? I don't want to keep anything again, I just want to let him be as before.
Thank you in advance!
Your main problem is that move the users folders in win7 is a process not supported and may result in unintended consequences
-
Original title: connect Windows 7 to the output of user profiles?
I want to reinstall Windows
My user profiles are on a separate HARD diskIs it possible to connect the new install of Win 7 to these existing profilesOr I'll create all new profiles and just move all the files manually?You can change the registry so that it points to your old profile folder. However, I suspect that this would cause problems because the SID and many registry keys would be incorrect for the current installation. I would like to move the folders manually.
-
I allowed to CS2, I contact Adobe support for new link and new key for the new facility for the computer updated. In the installation, I have inserted the key from ADobe that I got Adobe support, but when I opened any CS2 program it will not work and gives me the invalid key error. What should do?
CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.
l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm
https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html
-
12 elements Photoshop on my other Mac having recently had not smashed, new no CD player. How do we install the elements with my product key? Buying an external CD drive is not an option at the moment after the fork on the 2500 for the new Mac...
Downloads available:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
- Acrobat: XI, X | 9,8 | 9 standard
- Premiere Elements: 12 | 11, 10 | 9, 8, 7
- Photoshop Elements: 12 | 11, 10 | 9,8,7
- Lightroom: 5.6| 5 | 4 | 3
- Captivate: 8 | 7 | 6 | 5
- Contribute: CS5 | CS4, CS3
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP
I plan to upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP
my PC configuration is like below:
Card mother Intel DH61WW
Processor Core I3 2100 3.1 Ghz
4 GB OF DDR3 RAM
Seagate 1 TB SATA HARD drive
OS: Microsoft Windows XP Professional SP3I run Windows 7 upgrade advisor in which some results below the incompatibilities:
Intel (r) 6 Series / C200 Series Chipset Family SMBus Controller - 1 22
Unknown Intel we have not the compatibility information about this device.
Intel 82579V Gigabit Network Connection
Unknown Intel we have not the compatibility information about this device.
Realtek High Definition Audio
Realtek unknown we have not the compatibility information about this device.Here's my conceerns:
What needs to be done to overcome the problems of incompatibility?
Do I need to download new software files compatible for windows 7 and then install
for example VLC media player, Skype, MySQL Server I am running
or currently existing files are compatible to install with Windows 7?Would I be able to upgrade to windows 7 without any problem and safely?
Could you please help me with the questions above?
Please correct me with additional suggetions that I may have missed with.
Looking forward to hear from you
Thank you
You understand that you will not be able to upgrade Windows XP to Windows 7? He will have to do a clean install.
The Council supports Windows 7, you can get the drivers here (the chipset drivers should be the first drivers you install after installing the operating system.)
John
Maybe you are looking for
-
Satellite A135-S4666 - cooling fan turns on and turns off every 20 seconds
Hello I'm from the Argentina... I just bought a new Satellite A135-S4666 and I noticed that the cooling fan turns on and turns off every 20 seconds.It is a little annoying and it disctracts me of what I'm doing... is there a solution? Thank you very
-
G505S - 5.20 GB usable off 6 GB RAM
Hello I had this problem for Windows 8.1, but it is still evident in Windows 10. When looking at system information for my Lenovo G505s, Windows shows that I have only 5.20 GB of usable out of ram preinstalled 6 GB ram, I should have. The specificati
-
Stuck in aloop security properties
I put a shared folder, but when I try to close the properties it maintains security settings every time and does not close. I tried to tie the record, but then just got an error message when trying to close the properties and still not closed. So I h
-
Windows 8 stuck while resetting my laptop
I tried to reset my laptop (windows 8.1 for windows 8) but it stuck at 5% for 30 minutes. I pushed the on/off switch and forced to close. When I rebooted my laptop it does not continue the reset process. It says "Prepare the automatic repair", but it
-
Cannot import AVCHD file in Premiere Pro after update to 2015.3
After updating to 2015.3 this morning I can no longer import the files into AVCHD folder, the program just guard locking up and I'll get the RESPONSE message is NOT in the import window. I'm on a Windows 7 computer.