Keyboard and magic mouse

Similar Questions

• Can not switch to OSX Recovery Mode: looking for the keyboard and magic mouse

  I'm trying to reset my end 2012 Mac Mini 2.3GHz/i7/16GB to factory settings to try to get the machine a new lease on life.

  However, when I try to enter in Recovery Mode (in now command ⌘ + R when the system starts up), the machine will stop to a screen showing the instructions to turn on a magical keyboard and Magic Mouse.

  I have a trendy apple (USB) keyboard and a USB mouse is connected.

  How can I activate these entries, or how can I pass this screen looking for a keyboard/Magic Magic Mouse?

  [I guess one option is to use a magic mouse or a magical keyboard - I have in my office - but it is not sensible that you need them to access recovery mode].

  Thank you

  Got my Magic Mouse of the office, got into recovery mode. Surprised, you need a Magic Mouse, and who does not have a USB mouse to the recovery mode!

• Problem starting el capitan (sierra) - built-in keyboard and the mouse do not respond

  Hello

  I have a 2015 macbook pro (SSD 256, 16 GB of RAM last el capitan updated) with a wired problem.

  I use it mainly to a cinema monitor and I use wireless keyboard and mouse (office installation program), and of course as a stand-alone laptop when I'm not at my desk.

  When I put the laptop to sleep, everything works fine when I wake up.

  but, if I'm away from the office and I have to restart my laptop, here is the problem.

  The boot process is very very slow, there is no edge, and when I finally have the screen to unlock the safe, the keyboard and the touchpad do not react. Actually, that's not exactly true, they are so slow that they are unusable and get caught quickly, all gel. So I can't unlock and complete the boot. My laptop is unusable ;-(

  At this point, I get a message that if I forgot my password I just need to reboot by pressing the power button, and I'll be able to reset it.

  When I do this and aprΦs the dΘmarrage that more slowly than usual but ok, I get another screen with several options of problem solving. One of them is "keyboard not responding do not. When choosing this one, it asks if you want to remove safe. I tried and everything was back to normal.

  later, I delivered safe and I had the same problem again. I did the thing to be able to restart again and improved to sierra in the hope that it would disappear. However, the problem is still there.

  I thought I could try to restart my office to see if my keyboard and wireless mouse would still work. Indeed, even if responsiveness was not normal, I could unlock and fill the chest.

  I have the impression that my laptop always "believe" it is on my desk, linked to my screen (probably the reason why I don't hear the Bell) and to my wireless K & M.

  It's really annoying and I hope someone has a solution.

  Thank you very much

  best,

  Alex

  I'm having a similar problem with macOS Sierra which I didn't have with El Capitan.  I can possibly move the cursor on the power button and turn off (no), but I must be patient because the keyboard and trackpad are only for a fraction of a second, which only allows me to move the mouse slightly.  After he stop and start back up, everything is perfect until I tried another reboot, and then I'm back to the beginning.

  I tried to reinstall the operating system, reset the SMC, resetting the NVRAM, reboot in SafeMode... nothing worked so far.

• The keyboard and the mouse no longer works to update you Sierra

  Hello, I upgraded to OS Sierra and I began to spend more and suspending Notepad, then I do not recognize their keyboard and mouse notbook. It forces the walk outside and then worked, but after a few days I don't work any more.

  Thank you

  The keyboard and the mouse no longer works to update you Sierra

  Hi gnardone,

  Thanks for posting in the Community Support from Apple. I understand that you are having problems using your mouse and your keyboard after the update for Sierra. View the work of keyboard and mouse are crucial for your Mac, so I can understand how this is a problem for you. I'm happy to offer assistance.

  You are having problems with the keyboard and the trackpad that are part of your MacBook or you are having problems with a keyboard and an external mouse? I recommend taking a look at the article below.

  If your Apple wireless mouse, keyboard or trackpad doesn't work as expected

  If you're still having trouble, let us know what kind of mouse and keyboard that you are having problems with and what you have tried to solve this problem.

  Best regards.

• My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse.

  My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse. It runs OSX Mountain Lion (not sure which version) and is a model 27 inches.

  have you tried to change the batteries in the mouse?

• I want to connect a keyboard and a mouse to a work of will the Microsoft Wireless Optical Desktop 1000 Wii?

  I want to connect a keyboard and a mouse to a work of will the Microsoft Wireless Optical Desktop 1000 Wii?

  Hello

  The Microsoft Wireless Optical Desktop 1000 offers freedom wireless and access touch to web and email facilities. RF wireless functionality gives you the freedom to sit and relax.

  It works with a radio frequency and unable to connect to WIFI.

  It will be useful.

• Windows xp blue tooth detects the keyboard and the mouse, but immediately removes both

  Just installed windows xp and having trouble with the blu-tooth now the keyboard and mouse

  Hi Bruce,.

  1. What is the brand and model of your keyboard and bluetooth mouse?

  2. What Service Pack is installed on your computer?

  If you have Service Pack 2 installed on your computer, I suggest you to follow the steps from the link and check if it helps.

  How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

• System Restore with the keyboard and the mouse works do not and do not know admin password

  I recently decided to update my drivers on my 9 year old bridge. Apparently the program that I used to do didn't realize a bad driver when he sees... Sort of my keyboard and mouse not responding while windows was loaded. They work enough for me to access the bios, enter the menu start and also when I hit enter to boot from a windows cd.
  I'm trying to access my restore points to get rid of the driver that has been installed. Unfortunately when I put the windows CD and try the repair option I can't log on to the volume because it requires an administrator password. I tried Admin admin admin admin and leave blank. I even ran a program to reset passwords (I do not use any which way.) still cannot log on to the volume. I also tried to pass in front of the screen to repair and installation of windows to fix this. I can hit escape and pgup and pgdown but not f8 to agree to the agreement.
  When I boot in safe mode with command prompt that it still forces me to click on an account to connect. Which I can't because the keyboard and the mouse do not work when windows is loaded.
  I can't get to the command prompt to display the box to help restore points?

  Hello

  ·         Did you do changes on the computer before the show?

  I suggest you to follow the steps in the article in the Microsoft Knowledge Base and check if it helps.

   

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Regarding the password administrator there are chances that you must have defined and now you don't remember or if the bridge keep some default password. You can also contact the Support Technology Gateway for help on the issue.

  Technical support Gateway

  http://support.gateway.com/us/en/support/default.aspx

  Hope this information helps.

• Reset computer to factory settings, installed SP1 and lost control of the keyboard and the mouse. Had to do system restore just before the installation of SP1.

  Original title: help

  OK to reset to factory settings to allow hopefully laptop to read CDs again, then downloaded installed sp1 and lost control of the keyboard and the mouse, and still can not play music not forget hadda restart in safe mode to use the system restore to just installing the sp1 b4

  Hi MartyFenwick,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the computer?

  2. What is the brand and model of the mouse and keyboard?

  3. you receive an error code or message?

  4. is everything works well after running system restore?

  5. what exactly do you mean by "hadda restart in safe mode to use the system restore to just installing the sp1 b4?

  6. what happens when you try to play music CDs?

  7. what program you use to play the CD?

  Please follow the methods and mark the question below:

  Before you install SP1, follow the method 1 and 2.

  Method 1:

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  I suggest you disable the antivirus for temporarily until the installation of SP 1.

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  Follow the steps in the link for problems with the keyboard and the mouse below.

   
  Mouse, touchpad and keyboard with Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Method 4:

  Follow the steps in the link below.

  Learn how to install Windows Vista Service Pack 1 (SP1):

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  I hope that the information above helps you.

• installed a keyboard and wireless mouse and the mouse works fine, but the keyboard types the wrong keys! Any ideas? Thank you

  installed a keyboard and wireless mouse and the mouse works fine, but the keyboard types the wrong keys! Any ideas? Thank you

  Wired or wireless - is usually not serious unless the wireless can get more interference.  If the keyboard is close to the receiver which is connected to the computer and you get the strikes hurt - my suggestion is to try first the keyboard on another computer.

  To do this, * not * require you to install specific drivers.  Simply unplug the combo of a computer and in the other and see if the keyboard works correctly.  Then, you can troubleshoot from there.

• Locking of the keyboard and the mouse after update Windows7

  System: HP 3135 Pro

  Windows 7 Prof 64 bit

  Microsoft wired keyboard 600

  Mouse Logitech RX250

  This problem started on October 16:

  After the automatic updates of Windows, the keyboard and mouse locked. Only to start in secure mode and come back with the widows, restore the system to a previous point, it is possible to activate the keyboard and the mouse again.

  Now, I turn off the automatic updates, to avoid the system freezes again.

  The Microsoft forum is not clear about this error, would be something regarding the HP computer?

  Any help is welcome.

  Hello

  There were some problems with the last batch of reviews/recommended Windows updates this month this.

  Among the updates disabled device USB 2.0 from a USB vendor specific drivers. I found a web reference that can explain what has happened to you. I think that the update has been removed from Windows Update. This article may shed some light on your problem.

  You can install each update manually until you find the cause of your problem. Unfortunately, when you find it you will have to restore the system again and avoid this update. Or Microsoft could have pulled the offending update.

  Is it only a matter of HP? Impossible to comment on.

  I've updated HP four systems, a Dell laptop and a system tailor-made without any problem.

  You really don't want to permanently disable future updates of Windows.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

  HP products:
  Office 810-150se (Win 8.1)
  17 t - j000 Notebook (Win 8 upgraded to Win 8.1)
  H8 1380t CTO Office (Win 7)
  560z Desktop (Win 7)

  Other PC:
  Laptop Dell Inspiron (Win XP upgraded to Windows 7)
  Custom build: (Win XP upgraded to Windows 7)

• using the KDL-46W700 how to connect to the wireless keyboard and wireless mouse

  Hello

  I use KDL-46W700 how to connect to the wireless keyboard and wireless mouse

  Unfortunately, you can not connect a keyboard wirelessly on your TV. Your TV will need a driver for this. Sad thing, it's impossible to install anything on the tv, which includes the driver for the external devices such as a wireless (except USB) keyboard... I recommend the SIDEVIEW TV application that has the remote control / function keyboard and mouse... this app is free and can be downloaded via Google Playstore... ^^.

• Keyboard and USB mouse stops working and kicking in and out.

  Hello

  I'm having a problem with my keyboard and USB mouse. Both at the same time stop working. Also, the mouse freezes every 10 seconds for 1 second (so boring). When the mouse stops working there is still of the red laser that is below normal. I am confused with that. I have all the latest drivers.
  Thanks for the help.

  Sys Specs: Windows 7 pro 64-bit, Intel DP67BG, HyperX 6 GB DDR3-1600 (3x2Go), Intel Core i7 - 2600K 3.4 GHz S1155, WD Caviar Black 1 TB 7200 rpm 3.5, EVGA GeForce GTX 470.

  Hello

  If you have a USB mouse wired and keyboard connected to your computer, and that they do not work properly, please check following things:

  1. Firstly, plug the USB into a different port on your computer. If they still do not work...

  2 try them on another computer! and if the problem is still there, it would be easy for you to just replace. But is not likely to result in the mouse and the keyboard does not at the same time!

  2 and if it's OK with another computer, which would be something wrong with your computer, and it could be from a hardware or software.

  Just see how it is done up to now.

• keyboard and the mouse do not work on the new computer with Win 7 Home Premium

  I just bought a new computer game.  The keyboard and mouse work in BIOS.  But when win7 brings me to the first screen for all upward (which requires language and country options) both the keyboard and the mouse both stop working and their lights go out.  The mouse is a Razer Death Adder, who i saw possibly requiring drivers to be installed.  However, the keyboard is a 4000 ergonomic Microsoft natural and I expect that it works.  Can someone please help me get their work.  Any help is appreciated.

  I had damaged USB drivers.  Technical support from the manufacturer did to be operational.  Thank you all.

• Keyboard and the mouse does not work after the release of sleep

  Original title: error keyboard and mouse

  After you have installed Windows 8 I had problems with the keyboard and the mouse.

  If the computer disconnects a half our for example, when I come back, the keyboard and the mouse do not work,

  I can not connect and I have to restart my computer to the power button.

  How can I avoid this problem? It happens every day at least once.

  Hello

  1. you are using a wired keyboard or mouse and wireless?
  2. What is the brand and model of the PC?
  3. have you checked if other USB devices work on the PC after you resume the computer from sleep mode?

  I suggest you follow these methods and check if it helps.
  
  

  Method 1:
  If you use the USB keyboard and mouse, and then follow the steps below to uninstall and reinstall the USB controllers.

  (a) press the Windows logo and X from the keyboard.
  (b) type devmgmt.msc , and then press ENTER.
  (c) expand Bus USB controllers.
  (d) right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (e) restart the computer and reinstall the USB controllers.
  (f), check the question;

  
  Method 2:

  The 'USB selective suspend settings' option in the Power Options can be activated.

  (a) press X and WWindows logo and choose Power Options
  (b) click on change plan settings for the selected power plan
  (c) click on that to change advanced power settings
  (d) Expand USB settings and then the USB selective suspend setting and change them to disabled.
  (e) click OK in the power settings window, and then click save changes in the Edit Plan settings window.

  Method 3:
  If this does not help, I suggest to change the power to its default settings and check if it helps.

  You can follow the steps to do this:

  (a) press the Windows logo key and X set and choose power options.

  (b) under the preferred plans, click on balanced (Recommended).
  (c), click Change Plan settings and more balanced (Recommended) option.
  (d) click on restore default settings for this plan on .
  (e) click Yes to save the changes.

  Now check the issue.

  Let us know if it helps. If the problem persists, please answer, we will be happy to help you further.