Keyboard does not not correctly on A60

Some keys on the keyboard do not work. I assumed it was just the keyboard that comes at the end of his life, so I bought a new keyboard. With the new keyboard do not work the same exact keys. Does anyone know if it is possible to replace the keyboard on the system board connector, or it will take a whole new motherboard? Also, anyone know how much it costs?

Thank you very much

Hello

You suggested that some keys on the keyboard don't work properly.
The keys get stuck or what happened? You connect the cable correctly after a change in keyboard?
As far as I know that the keyboard controller is fixed mounted on the Board and it of not possible to replace this part only.

Tags: Toshiba

Similar Questions

  • Keyboard does not correctly type

    I don't know what is happening with my keyboard, to type different characters, but when I type my password for the laptop it recognizes characters, what could possibly go wrong. I need help :(

    Hello

    Thanks for posting your question on the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    What is the brand and model of your laptop?

    Thank you for details on the issue.

    This problem can occur either because of corrupt keyboard drivers or incorrect keyboard settings.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run the hardware and devices Troubleshooter and check. Please follow these steps:

    a. press Windows + W keys, type Troubleshooting in the search box and press ENTER.
    b. click on 'show all' and then click 'hardware and devices'.
    c. click 'Next' and follow the on-screen instructions.

    If this does not help, use method 2.

    Method 2:
    Please use the suggestions in this article and check the issue.
    Reference:
    Troubleshooting of Windows 8: keyboards
    http://www.Microsoft.com/hardware/en-us/help/Windows-8/troubleshooting/keyboard/using-keys

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • M30X keyboard does not not correctly after portable computer transport

    I have serious problems with my m30x.
    The keyboard does not work well. Sometimes, he produced many signs "ay" and takes no input from me.
    When I hit (gently) on the chassis it sometimes works again. No help for it?
    Thank you

    [Edited by: admin August 10 05 19:28]

    Hello

    I'm sure you know very well that if there is a problem like yours you can not do a lot to resolve. If the keyboard buttons don t work so the most that it can just be a mechanical malfunction.

    I put t think you can fix that. You can try to connect the external keyboard and check how it works. If there is no problem I guess that the internal keyboard needs to be changed.

    BR

  • Keyboard not working does not correctly earns 10

    Hello

    I have an Aspier 5332 OS 10 pro windows, the keyboard does not work properly. Working scroll not working, mouse pad moves the cursor, but listen to select something opens the context menu . It just doesn't feel good. Selection of stuff, feels that it is necessary to click the button twice.

    Before OS update the mouse used alps touchpad. Device Manager says its now mouse compatible ps/2

    The device manager says that it has installed the most recent drivers.

    Very annoying. After searching on the web, this seems to be a big problem. All the solutions to this?

    Thank you

    Found a driver Alps is compatible thank you. http://www.iteegra.com/Acer-Aspire-5332-touchpad-not-working-Windows-10/

  • Keyboard does not not correctly on a user's profile

    Original title: keyboard problems:

    I am currently connected to this computer under my husbands sign in.  The keyboard works fine.  When I log in under my name, the keyboard is trying to enter my password, but when I try to use email or internet keyboard does not work properly.  To type a letter, I have to hold the button for a second.  I checked the connections, drivers, etc.  But as I said it works fine in my husbands connect you.  Is there something on the keyboard I have insisted that this would cause?  Help?

    Check your FilterKeys if his shot, turn it off:

    Go to control panel-> Ease of Access Center-> make the keyboard easier to use-> click to clear the check box before turning on FilterKeys.

  • HP laptop keyboard doesn't work does not correctly

    Friends I have a hp laptop, it's keyboard does not work properly when I press 'G' slap 'C' and other buttons have the same problem.

    If anyone has a solution please answer.
    Thanks in advance

    Hello Rahul,

    Please answer the questions below to better understand the issue

    1. What is the exact make and model of the HP laptop?

    2 from when is the persistence of the question?

    3. don't you make changes to your computer before the show?

    4. have you installed all the latest drivers associated with your computer?

    In the meantime, go to the icon start, right-click > select Control Panel > (set as small icon view) > troubleshooting > material and audio > hardware and devices > click advanced options and tick the apply checkbox automatically repairs > next.

    Please get back to us with the necessary details so we can solve your problem as soon as possible.

  • El Capitan keyboard does not not after reboot

    I have a Macbook Pro 13 inch with OS X El Capitan 10.11.6

    After one of the recent improvements, I met a problem, if I take my mac, the keyboard and the trackpad to respond enough lag (if I constantly try to move the cursor, he'll have a time and then for like half an hour it will completely stop responding and after this the other repeats). It only happens after reboot and only on the login screen. So if I put my mac to sleep and then wake up, everything will work perfectly. Same thing if I managed somehow to connect, once the keyboard and trackpad respond correctly. The only button that works fine after reboot is the power button, but it doesn't help much, because it charges does not solve the problem somehow: as soon as the user selection screen, keyboard and mouse stops responding again (or should I say "start answering from time to time").

    I saw lots of questions here on the keyboard does not not after waking up, but as you can see, this isn't my situation.

    Try again in Safe Mode.

    Start up all by holding down the SHIFT key. It takes five minutes longer because it is a disk first aid on the way up, and you MUST provide your user name and password, even if you normally the automatic connection.

  • Satellite S50D - A - 10 H - keyboard does not

    I have a Tosh Sat S50d - A - 10 H, and the keyboard has stopped working.

    I can't type anything in Word, Notepad, or do a search... Research is essential because there is no start menu and have Windows 8.1.

    Suggestions how I can fix this without doing a reinstall?

    Carl

    I tried to ad a few minutes ago and don't think that I did it correctly because it does not appear in the forum

    My keyboard does not work. I can n ot type in Word, laptop or do a search which is essential with Windows 8.1... There is no start menu!

    Could someone advise me how to get my keyboard works again?

    Carl

  • L50-B-2FN satellite: select the keys on the keyboard does not

    Hello

    I have a Satellite L50-B-2FN, bought just five months ago (February 2, 2016), and apart from a problem recurring with the lid doesn't close does not correctly, I now have a hardware problem: the keyboard stopped working fully, with most of the numbers keys does not respond as well as the letters R and Y.

    I checked the keyboard configuration and drivers via Device Manager and the computer tells me that everything is working properly and updated, but this is clearly not the case. I tried Toshiba's own online recommendations: uninstall the keyboard (http://support.toshiba.com/support/t...TYPE=COMPUTERS) and a restoration of the system to the last automatic (http://forums.toshiba.com/t5/System-...10/ta-p/657989), but neither solves the problem.

    What I understand online forums, like thi keyboard problems are a problem common _very_ Toshiba satellites, especially those running (or update of) Windows 10 (mine came with Windows already installed 10). He, however, seems to be a clear or coherent solution. Can anyone help? Apparently the warranty on this unit (serial number, part number) expired on December 1, 2015, so even if I only bought it from the store on 2 February 2016, he is not covered - otherwise I would request a replacement, especially since the problem with the lid doesn't close does not correctly too...

    Thanks in advance, Martyn

    Hi - suddenly a similar probs with Tosh laptop Satellite... 2, w, s, and c keys do nothing. Upgrade to Windows 10 about six weeks ago... any ideas please? /

  • Sam L20-217: Sometimes keyboard does not work

    Hello
    It is about 3 days I'm having a problem with my keyboard of the satellite L20-217.
    When I get missing some characters in a sentence.
    Like when I want to write Toshiba it suddenly doesn t the T type, I have to oshiba. It is not with a specific key, it is located in the middle of typing with a key even space or BACKSPACE.

    Help, please.
    Thank you

    Hello

    Believe me, the same produce for me, but I use external keyboard connected to my Tecra. I think it's my fault because I write very quickly, and sometimes it's the button does not correctly.

  • Satellite C660 - new internal keyboard does not work

    Hello

    I'm completely stuck I have a portable satellite c660 keyboard did not work.
    So I bought a replacement keyboard and installed and checked in the Device Manager and it says it is there and works correctly, but the replacement keyboard still does not work.

    I updated the bios and uninstalled the keyboard drivers and reinstalled them that I've done everything I can think off to try and get this new keyboard working but I am having no luck and could so with some assistance.

    Have you ever checked if the USN external keyboard works properly?

    I ask because in the case where the external keyboard does not work properly, the internal keyboard problem could be related to faulty keyboard controller (motherboard) or a problem of system m.

    In case the external keyboard would work properly, you had any luck with the new keyboard. It might be possible that the new keyboard is malfunctioning.

  • Equium M50-235: the keyboard does not work after upgrde memory

    I just did an upgrade memory on my laptop using the second slot located under the keyboard.
    However, as I was putting the keyboard at the rear, the ribbon cable has pulled away from the motherboard and even if I pushed
    Reconnect and fixed with the clip, the keyboard no longer works.

    Is there a service manual I can get hold of someone know what could be the cause of the problem?

    Thank you!

    Hello

    First of all, once you unscrew the keyboard, open the clip that secures it in place and reinstall the keyboard by ensuring that it is completely down. After that, now the flat cable in place, close the clip. Then, make sure that it is not lost and that it is seated correctly. Then turn on the laptop and see if it works. If this is not the case, try an external keyboard. If an external keyboard does not work, the keyboard on your MB controller is dead and you need a new MB. If an external keyboard works then your keyboard is dead, or the connector on the MB is dead. Best way to test is to try the first solution. If it doesn't work, take it to an ASP so they can try another keyboard for your laptop. Good luck.

  • HP 1287c Windows 7: windows 7, try to use the model of hp 1287c hp 5302 keyboard does not

    have a hp 1287c windows 7 tries to use the model of hp 5302 keyboard does not respond

    try to use the old Hp keyboard model 5302 was for windows 2000 did not know if could use when I plug computor does not recognize he wonding if possible to work?

    45fmj

    Hello

    Well, the keyboard is now very cheap, the converter may not work correctly. After 16 years of him please give a rest.

    Kind regards.

  • Update KB976902 now the mouse doesn't work does not correctly

    I had the KB976902 recently updated on 2 of the 3 computers and 2 who got now have a mouse that does not correctly.  The computer number 3 does not have the update and still works fine.  All three are almost identical hardware and software and have legitimate versions of windows 7.

    The problem of the mouse made play almost almost impossible. Left click crashes, lag mouse click one or two times when I I try to do a restore from the left eventually drag a shortcut of the thing, I clicked on and don't know how or why.

    I did a restore on a single computer, but it did not help.

    Norton and McAfee applications are notorious for not to uninstall (or upgraded) themselves. Since you are not sure, I'll have to have executed two removal on all of the computers in question tools.

    NB: If a step said to reboot, reboot!

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. right click on the file saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

    3B. right-click on the file saved in # 1 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

    4 reset the IE8 advanced settings by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

    5. open Internet Explorer 32-bit (only!) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

    6. restart a last time & test.

    ~~~~~~~~~~~~~~~~~~~~~~~~
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Keyboard does not work after installing Vista

    I loaded window vista and since my keyboard does not work, tried unistalling with no luck. who can help?

    Hi funminey,

    Please see the following article some troubleshooting on your question:

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    I hope this helps!

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Microsoft Wireless Multimedia Keyboard does not completely work in Vista

    I have the MS Wireless Multimedia Keyboard 1.1 installed on my PC.

    I recently had a few separate issues with my computer and technology at Geek Squad did some work cleaning on my PC for best performance and to get rid of a bad program.  I am running Vista SP2.

    On my keyboard, there are a series of buttons on the top which opens to different folders, or programs.  I had to open Excel and open Word.  The others are default Media Player, email, IE 8, My Documents and my pictures.  Everything worked correctly and opened the program folder / to, before cleaning.  Now mail, IE 8, and Media Player buttons still work, but others did not.  However if I open the Microsoft Keyboard program buttons become functional and remain so until I restart the computer. The keyboard works fine otherwise.  Y at - it a boot option which can have been withdrawn inadvertently during the cleaning process, which is the cause and if so how can I have reconstitute?

    Thanks for any help.

    Hi BCfromKY,

    To test the response of the keys on the keyboard, use the Microsoft keyboard Diagnostics (MS Key), a utility program that is included with the Microsoft IntelliType software. To use MS Key, follow these steps.

    Note the MS key utility is only supplied with the version of the Microsoft IntelliType 1.1 and later versions. If you do not have Microsoft IntelliType installed, you can visit the following Microsoft Web site to install this software:

    http://www.Microsoft.com/hardware/download/download.aspx?category=MK (http://www.microsoft.com/hardware/download/download.aspx?category=MK)

    Start Microsoft Keyboard Diagnostics. To do this, use one of the following methods:

    a. Click Start, click principally made programs, accessories and then click Run.

    (b) in the Open box, type mskey and then click OK.

    c. If you get no response in MS Key on your keyboard, test the keyboard on another computer. If the keyboard does not work on another computer, see the "Références" section for more information on how to contact Microsoft Supplemental parts to get a replacement.

    For more information, you can consult the following article:

    Troubleshoot wired keyboards that do not or only the erroneous characters category

    http://support.Microsoft.com/kb/258826/en-us

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for

  • Apple store 4th gen Apple TV apps.

    Can someone tell me witch apps are available in the Apple store can be used with the Apple TV (Europe, Netherlands) Dutch 4th generaties? If this is not the case, where I can find an answer? I intend to buy an apple TV is based on applications availa

  • DVD-RAM UJ-820 s: speed problems

    Just wondering if someone has managed to solve the problem with UJ-820 s, i.e. the speed not how it should be for the writing/extraction. I had to use using a USB to get anything above 2 x when the specs say that it should go to 4 x - false advertisi

  • Pin configuration of e/s for an FPGA

    Hello I have a 7830R FPGA which has "DIO" pin on this subject. I would like to cofigure some of these pins to be entered and others to be taken out. Where to define what they must be configured as?Cheers, Alec

  • Delay in an executable LabView 10 starting with the present mapped drives in Windows 7.

    I am running windows 7 on a network peer-to-peer without internet access with an executable version of LabView 10.  Executables mapped access folders on the network and works very well once it is up and running.  The problem is the time required to r

  • How do I scan multiple pages to a file or a printer ENVYCN517A email

    Have an ENVY100 D410 series printer.  How to scan multiple pages on a single file or e-mail attachment?