Keyboard does not work after installing Vista

Similar Questions

• Satellite A210: taken micro does not work after installing Vista SP1

  After you have installed SP1 for Vista, had a number of problems and the head is a main & mic Sockets is more work in front of the computer.
  So cannot use Skype etc.

  Any help appreceated

  Bill

  Train from my own experience the SP1 is not fully compatible with the various drivers.
  In case you looks that the audio driver does not work with SP1.

  Don t know what sound card you have (maybe Realtek?), but a sound card driver update would be desirable.
  If it doesn t help you will need to wait until it comes out an update of the audio driver

  CU

• Device CD/DVD Toshiba HD DVD (not Bluray) does not work after installing Vista Service Pact 2

  Computer computer = laptop Acer Aspire AS9810-6829
  S/N = LXAF 15 707 0065 023 00 60V0
  Operating system = Windows Vista Ultimate... Service Pack 2
  Problem = DVD player does not work!
  DVD model = TOSHIBA DVGW/HD TS-L802A ATA Device

  Measures taken by the owner to correct the problem.
  1. check the Device Manager and records the following information:

  Windows cannot start this hardware device because its
  information of configuration (in the registry) is incomplete or damaged.
  (Code 19)

  Click on 'Search for solutions' to send data about this device to
  Microsoft and see if there is a solution available.

  2. Replace hard drive with a backup hard drive for 8 monthe ago.
  The DVD worked correctly with the old disk installed hard & Vista Service Pact 1.

  3. has concluded that the information in the registry for the DVD has been damaged.

  4. do you have a complete 'Clean Install' of the operating system and all applications.

  5. the problem seems to be resolved.  The DVD worked.

  6 Windows began its update procedure.  Several updates have been installed as well as
  Service Pack 1.  After each installation of the DVD worked fine.

  03:07 days of windows update, Windows Service Pack 2 has been installed.

  8. immediately after installing Windows Service Pact 2 DVD has stopped working
  Device Manager displays the same message that appears at the point 1 above.

  9. Please help!

  Ken Lewis
  E-mail address is removed from the privacy *.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite U305-S7467: Chicony 2.0 does not work after installing Vista

  I have install Windows Vista in Spanish in a Satellite U305-s7467 with Vista home premium but the webcam is not working...
  I need suggestions. I have download the drivers from the Toshiba site and it doesn't work too.

  Thanks and byee!

  What Toshiba site? European or OUR support page?

  The right tools, you can find on Toshiba US support page - http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
  You will find all the stuff for your U305. It is in the list.

• The keyboard does not work after installing Language Pack.

  Original title: where is my underscore?

  After you install an update for the language pack, my keyboard settings got screwed up and keyboard is not what he suppose to type.

  I can't type the line of underscores, @ is located next to p. ' is Maj + 7 and so on.

  How can I restore old setting?

  Thanks for your advice.

  I tried several different things suggested, and my problem is solved little.
  I just have to click on the icon to move my tongue between IN & JP. (I used to be able to spend it with SHIFT + Caps lock key)
  Thanks again,

• Safari does not work after installing macOS Sierra

  Safari and apple store does not work after installing macOS Sierra

  Alas, my crystal ball is in the shop for cleaning, so you will need to provide more details on what "doesn't work" and above all error messages. First of all, let's start the App Store. Provide as much information as possible for those of us who do not sit on your shoulder.

• Bitmoji keyboard does not work after last update iOS 10

  My Bitmoji keyboard does not work after that I updated to iOS 10 update. I have no idea why, my friends Bitmoji keyboard works fine after that she has updated her phone and mine does not work so I was wondering why. It worked perfectly fine before I upgraded my phone. I was wondering what to do.

  the same problem. He repeats to me go to keyboard settings and make sure that it says allows full access to Bitmoji and it does. Should not have upgraded to iOS.

• My safari does not work after installing iOS 9.3

  My safari does not work after installing iOS 9.3

  This is a known issues with 9.3 and Safari (with the mail application and other applications)

  Some have reported success goes in the settings, safari, advanced and Disabling Javascript. Others said that Opera browser works, so you can use it as a workaround until a patch is issued. There is no indication how long can take this difficulty. Maybe in a few hours, could be days.

  or you just have to wait it out.

• Keyboard does not work after authentication on the RDS Session host

  When you connect to the RDS through the access portal or app keyboard does not work after authentication on the RDS session host. Offline authentication works very well, past will guide you to the RDS host, then when you try to reset your password, the keyboard does not work.

  Has anyone else had that... ?

  Options (some better than others!) are:

  1. move all MS applications seamless

  2. have an application named "Reset your password" (or similar) which uses MS Seamless.then you can leave other applications, as they are

  3 disable authentication carried forward and implemented our service reset password instead so people reset their password before can connect you.

  4. use the full desktop instead of transparent

• Laptop does not start after installing vista sp2

  My Dell XPS 1530 stopped working after installing vista sp2. He gave me instructions for installation, step 1 of 3 and it went all that they way up to step 3 of 3 and said its closure and never came back...
  Please let me know, how to start the laptop.

  Hello GoogleGuru,
  Thank you for visiting the Microsoft Answers forum.
  Because your computer does not start until the desktop computer, we were able to try the system restore to a point before you install SP2.
  Thus, with the computer is shut down. Press the power button, then press on and press F8 until you see the startup options, and then it will give you the ability to boot to the last known good configuration. (select it).

  If this does not work, you can try to boot from the Vista DVD and use the recovery console to perform a restore of the system to another point in time.

  Post back with the results.

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Equium M50-235: the keyboard does not work after upgrde memory

  I just did an upgrade memory on my laptop using the second slot located under the keyboard.
  However, as I was putting the keyboard at the rear, the ribbon cable has pulled away from the motherboard and even if I pushed
  Reconnect and fixed with the clip, the keyboard no longer works.

  Is there a service manual I can get hold of someone know what could be the cause of the problem?

  Thank you!

  Hello

  First of all, once you unscrew the keyboard, open the clip that secures it in place and reinstall the keyboard by ensuring that it is completely down. After that, now the flat cable in place, close the clip. Then, make sure that it is not lost and that it is seated correctly. Then turn on the laptop and see if it works. If this is not the case, try an external keyboard. If an external keyboard does not work, the keyboard on your MB controller is dead and you need a new MB. If an external keyboard works then your keyboard is dead, or the connector on the MB is dead. Best way to test is to try the first solution. If it doesn't work, take it to an ASP so they can try another keyboard for your laptop. Good luck.

• Trackpad and keyboard does not work after upgrade to Windows 10

  Trackpad and keyboard do not work after the upgrade to Windows 10 in Boot Camp on a MacBook Pro in early 2011. So, I'm unable to enter password. How to connect? Can I go back to Windows 8?

  1. you can turn off your Mac and your power it back up and hold the Alt/Option key.

  2. you can also run the following procedures to restore the OS default.

  3. If you use a Mac 2010 to run W10, officially Apple does not support the combination. Older than 2012 Mac is not supported for the W10.

  4. Please see also Boot Camp: the operating system default value .

• His Dell Inspiron 1420, microphone and camera integrated into the laptop does not work after installing Windows 7 Professional

  No sound from my Dell Inspiron 1420 and the microphone and built-in laptop camera do not work after installing Windows 7 Professional 64-bit. My laptop has Windows 7 Vista 32 - bit family premium. My laptop is 64-bit capable and after going through the Upgrade Advisor, I installed Windows 7 64-bit. I can hear sounds when I use a headset plugged into the line-in Jack, but not through the speakers built into the laptop. I already tried new drivers from the Dell website, but I could not find.

  Any help will be much appreciated. Thank you.

  As it is has no drivers 64 bit Windows 7 on Dell Web site, your best chance is to install the 64-bit versions of Vista (if they exist) in compatibility mode, viz:

  Right click on the Vista driver, then select Properties > Compatibility tab. Now choose to run the program in Vista compatibility mode and then apply > OK. Right click on the file and select run as administrator to install it.

• Satellite A665-S6086 - keyboard does not work after the outpouring of fluid

  I have a Toshiba Satellite A665-S6086 laptop. A couple of months, I spilled the zeroth power and he went on the keyboard. I'm sure that some went through it as well. The computer turns now and I can use an external mouse and external keyboard. Nothing on my keyboard does not work as well as the mouse. I can't go on the internet due to not being able to use the F8 key so.

  The only key/button that works is the power button. The dvd/cd drive works.
  Help, please.

  The external key board I use has no FN key. a f1 to f12, but when I hit the button on the external key board f8 nothing. Please help me get internet light somehow.

  Thank you

  And what kind of help do you expect now? What can we do?
  Why you n t fix it and be happy with the new keyboard?
  How long you want to use your laptop in such a State?

  Contact Toshiba service, let them swap keyboard and clean your laptop. OK it's a bit chilly but you'll well workbook again.

• keyboard does not work after sleep

  I have a light keyboard Logitech model Y-UY95. When the awakening of the mode standby the keyboard does not work.  Anything can be typed. I have to restart Windows 8 and then it works again.

  Had a similar problem on a HP Elitepad 900 go to sleep and not waking up... update the firmware/bios fixed it.  This known problem when I called HP, was not documented any wher however