Keyboard does not work properly on the Satellite P100-465

Similar Questions

• Keyboard does not work properly

  Hello

  I had trouble getting my laptop satellite to initialize. Recovery disks & pressing F keys weren't working so I decided to open the laptop to see if there are any loose connections. To my surprise, the laptop seems to work again once I had the USB keys and put back them in! Unfortunately, before that I did, I opened the keyboard and peeked inside.

  When I booted up and tried to use the keyboard keys half of their work and the other half seem to think that they represent two other keys for example if I type the letter 'E' I get '3' and '-' as a whole. After 5-10 minutes the entire keyboard will become totally unresponsive until I restart again. Of course, I think I've done something here because this problem since I opened the bottom of the keyboard. This could be a hardware failure I have caused or is anyway that this issue can be resolved without replacing anything?

  Thank you very much

  Tom

  Hi Tom

  Theoretically, it might be just a connection lost between the keyboard and the motherboard, but I'm afraid, it can be a serious problem of m.
  Maybe you have damaged the connector of the keyboard cable or something similar, and not the keyboard does not work properly.

  I think the keyboard needs to be replaced to check if only this part is affected

• Keyboard does not work on my Pro Satellite R50-B-155

  Keyboard does not work on my Pro Satellite R50-B-155

  What is the reason for this problem?

  I guess that its dysfunction internal keyboard...

  From my point of few internal keyboard needs to be replaced to get it resolved.

• My laptop HP keyboard does not work properly.

  My laptop HP keyboard does not work properly. First of all, it makes a clicking dull when I type, second if I type (anywhere) it wont let me repeat a letter or any key back to back with waiting 2 + seconds. It comes with the connected keyboard or a usb keyboard. How can I stop this?

  In the Panel-> Accessibility-> make your computer easier to use-> make the keyboard easier to use, check your filter keys, if it is on, turn it off.

• DIAL-UP Modem is not working properly in the Satellite A200 - 1 GB

  My A200 - 1 GB modem does not work correctly. It tries to connect, but at last he said computer remote does not respond. As I noticed it has a modem 56kpbs of "I agree."
  It is shown as Toshiba Software Modem.

  I tried so many times it does not work properly. I tried changing the COM ports assigned to several other ports like COM1, COM10 COM, COM 4 ext... same thing happens.

  When I diagnose the modem via the properties of the modem without issues considered.
  Even when I'm component via the modem to a telephone line (I mean as a call) it works fine. I mean that he can call on a mobile phone or phone of the Earth.

  But the same phone line works fine with my desktop modem as same as another modem of HP laptop.

  It seems that there is a fault on my modem 56 k.
  I tried even uninstall and reinstall, but the issue still exists.

  Can someone help me in this case?

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=109510#109510

  Seems that started two threads on the same topic.

• Keyboard does not work under Vista on Satellite L300D

  Dear readers,

  I have a Satelite L300D with Windows Vista 32 bit Home Premium. It is about 5 months and so far I have not had problems.

  Today, I started the book and noticed that I was not able to type my password for Windows.
  I thought, there must be a problem with the keyboard and restarted the laptop.
  I tried to enter the Bios and I wonderd, keyboard worked as expected it. Back to Vista, the keyboard does not work yet.

  I rebooted again and activated Capslock befor the Windowsstartup and looked at the LED.
  Just after the appearance of the Windowslogo, Capslock off a keyboard was dead.
  So I thougt it must be a driver error. I deleted the two driver files Hardware-Director told me where the drivers keyboard, rebooted twice a keyboard had returned to work, but only until the next reboot.

  So I decided to make the recovery of HARD drive and reinstall Windows, thinking, this should fix the problem.

  But it's still there.

  Is there someone who could help me? If this is an error of the driver, is should have disappeared when the laptop is in a State of delivery, right?

  I would be very happy for any advice or help

  Greetings from Berlin

  Thomas

  PS: I want to say sorry for my bad English... :-)

  Hey mate

  > It's about 5 months and until now I didn't have problems.

  I wonder why this keyboard problem happened after 5 months of use?  :|
  This means that this keyboard worked fine using the Vista and the Toshiba Recovery disk operating system but recently stopped working if the Microsoft OS is running.

  In my eyes it s a hardware issue ok, it s really strange that you can use it in the BIOS and the Linux system. But I recommend to contact the ASP (certified partner) in your country and ask if the technician could test with the new keyboard.

  I think that your warranty is valid and therefore everything must be covered by the warranty!

  Good luck

• Equium M40X keyboard does not work properly

  I Equium M40X, but the keyboard does not work.
  I can not type anything with the keyboard. I reinstalled windows using the recovery CD but stil doesn't work.
  Please help me solve this problem.

  Sorry, but I think that the keyboard is dead and must be replaced. If you can get a new one let us know. Maybe someone can help you and explain how to share one keyboard.

  Good bye

• R500 + Dock + fingerprint USB keyboard does NOT work properly

  USB keyboard does NOT work before Windows logon. (Start-password to type with the laptop keyboard) Also the external keyboard fingerprint reader does never work in this configuration.

  (With my old Z60m, same keyboard and docking station even works well, except the startup password must be entered with the keyboard, the keyboard USB fingerprint reader does NOT work at this point.)

  R500 2732-6AG Vista Business

  Battery ThinkPad Advanced Mini Dock

  External USB keyboard with fingerprint 41A 5262

  Jochen

  New software of fingerprint for ThinkPad R400, R500, T400, T500, W500, W700, W700ds, X 200, X200s, X 200 Tablet, X 301 does not support the external fingerprint reader

  Click here to view the details of downloading new software.

  Click here to view the details of download for older software.

  On the software page oldest, you will notice that the keyboard agroenvironnemenaux USB and USB fingerprint reader.

• Satellite C855 - 1 GR - keyboard does not work properly

  Hello
  Yesterday I turned my laptop on to find I couldn't hit my password as some of the keys on the keyboard are not working. It's only a few keys, I noticed at the moment F L O R V, NumLock, enter, delete, and the arrow keys do not work either. When I press some keys turns num lock.

  Also when I open upward keys to self-retaining now is turned on, so I can't type anything, he used to come just I had turned off the laptop, but now it turns on if I just too closed.

  Any ideas? Ill use the keyboard of the screen now!

  Sounds like a malfunction of the keyboard.
  Try to connect an external USB keyboard and check if it will work properly.
  In case the USB keyboard would work properly, the internal keyboard needs to be replaced for sure.

• Qosmio X 70-A - keyboard does not work properly

  I have a Qosmio X 70-A-12N, newly purchased last September, 8.1 Windows 64-bit.

  After working properly (and lots!) for half a year, the keyboard started to stutter.

  If you type a paragraph or two, with say 250 words, each time and now, to say that every 10th or 20th Word (undpredictable), a key shot does not work. I tried another keyboard via USB: no problems, so it has to do with the built-in keyboard of Qosmio.

  It is not specific keys, and it is not the pressure with which you press the key.
  Any key can be be ignored from time to time.

  All drivers have been updated to the latest questions, the BIOS is 1.50.

  It seems that the problem is more important when working on the battery (not sure).

  Is it a software or a hardware problem? Should the keyboard be exchanged?

  My first thought was last updated from the BIOS, but according to the Toshiba download page you have latest version of the BIOS.
  You know that's not easy to say what the problem is here. I can't say with certainty if there is a problem with the keyboard, but maybe you should contact the nearest Toshiba service provider, explain the situation and ask for help.

  They know what needs to be done. at least, they have very good diagnostic tools and it is possible to detect the problem.

• Synaptics touchpad is not working properly on the Satellite A100-635

  My synaptics touchpad is not working properly my mouse works very well but does not work in every corner of the touchpad for special functions.

  I tried to set it up again but it had no result, also I downloaded a new driver, but it had no results to. My buttons multimedia keys like play/pause or stop are not no longer works.

  These buttons/keys stopped working at the same time as the touchpad. Checked with NOD 32 pro virus and spyware with ZA pro ==> no results.

  Who can help me with this problem?

  Hi Jarno

  Do you know how many different Satellite notebooks have a series? Drivers and tools are not the same for each of them. Because of this you should also tell us that you have.

  According to your description, I can tell you: install OS using support and recovery delivered with factory settings, your mobile phone must be configured correctly.

• Tecra 540 CDT: keyboard does not work properly

  Hi people

  Just bought a 540cdt Tecra second hand and the keyboard is a bit strange - A key does not work and some of the keys seem to make things weird-UPDATE prints an exclamation mark and key END operates caps lock etc. I don't know if it's a keyboard of knakckered or whether the same strange keyboard configuration has been made. If it's a flat keyboard will install a replacement to solve the problem?

  Also, is it possible to replace the CD drive with a DVD - ROM drive. From the looks of it all DVD players I have met seem to be model specific.

  See you soon

  Peter

  Hello

  Maybe your operating system has keyboard settings wrong country.
  Check in the control panel settings. But for me, it looks more like a keyboard or a keyboard controller failure.
  Perhaps also loses the keyboard cable.
  I don't know if only a new keyboard will solve the problem. I think the detailed diagnostic test is necessary.
  If you want to upgrade your laptop with DVD drive, please check first if it is taken in charge and compatible. If you install the disc is not compatible, then you will get an IDE error and the BIOS does not recognize the drive.

• Qosmio G30-163 mouse and keyboard does not work properly

  Hi all

  I installed an update of the firmware of the toshiba site. I think that the upgrade was for the dvd but am not sure. I just saw an available upgrade and installed. Stupid of me. The dvd drive has been previously not recording. If after installing the update of the firmware I has not restarted the machine. In the meantime, I forgot the upgrade and then I did to fix the error of dvd

  "Start the Registry Editor (start, run and type regedit and click on).

  Search for "UpperFilters" and "LowerFilters" (and "UpperFilters.bak" "LowerFilters.bak", if they exist) value under the following key in the registry and delete it:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Exit the registry editor.

  Reset. »

  Now, after restart the keyboard and the mouse does not work. I can't go in safe mode because I can't press ok for the user login screen. I have attached an external keyboard, but it still does not work.

  I use windows xp, I have a lot of data. I can't do anything. If anyone has any idea please help me. The laptop is out of warranty. I'm stuck. Help, please.

  John

  S rally strange because I put t see a link between the firmware CD/DVD, UpperFilters and LowerFilters and the keyboard and mouse.

  This is first time that a removal of the upper and lower filters would undermine the functionality of keyboard and mouse. Which is really strange.

  Anyway, you are able to access the BIOS? If this isn't the case, then this is not good.

  First of all, you should try to save the data stored on the HARD disk in this case, I recommend to remove the laptop HARD drive and connect it using a USB HDD on another controller.
  This would allow you to save the data to another HARD disk.

  Put the removed HARD disk in Notepad, and then try to reinstall the OS from the Toshiba restore CD.
  I hope that this will be possible because I don't see another way to get the operating system again.

  Good luck by a friend

• Touchpad is not working properly in the Satellite A200

  I have wired rather question for you, may be common.
  Touchpad on my laptop is not working properly, and I'm wondering someone can tell me what 'wrong with it. My problem is at the bottom,

  When I turn on the laptop, I can connect to the through the use of the touchpad, but after I logged in the only thing that I can move the pointer over the programs, but I can't double click or do anything else. When I double-clicked the icons it does nothing.

  So I thought I might turn off something by mistake, can I use the touchpad to connect.

  Can someone please tell me how to solve this problem or what I can bring to a service center?

  Hello

  If you can still move the cursor using the touchpad touchpad is not disabled.
  Perhaps a button configuration has been changed.

  Usually, you can configure the touchpad the touchpad settings.
  Did you check that?

  You can find the settings in the control panel-> mouse
  There should be an Advanced tab.
  Go ahead and check the settings of the advanced feature.

  Here, you can configure the simple buttons and also the touchpad.

  If you will not be able to reach these settings so I recommend reinstalling the driver for the touchpad again!

  Good bye

• USB keyboard does not work laptop computer whis Satellite A100-012

  I have install WinXPpro and my usb keyboard does not (id error 10). I have try 3 different usb keyboard. Other usb devices are working normally.
  Windows XP Home Edition reanimation keyboard drive works normally.
  I have install the chipset and latest bios drivers. What can I do to make my keyboard work in WinXPpro?

  Hello

  Don t know why the USB keyboard may not be recognized, but I recommend suite solution:

  1. click on start
  2. right click on my computer, click Properties
  3. click on the Hardware tab
  4. click on the Device Manager button.
  5 expand the Universal Serial Bus controllers section.
  6 right-click every device under the Bus USB controllers and click on uninstall to remove them one at a time.
  8 restart the computer and let the operating system reinstall the USB controllers.
  9. plug the removable USB storage device and perform a test to ensure that the problem should be solved.

  good luck buddy