keyboard driver and the mouse does not, uninstall driver does not work, any ideas?

Similar Questions

• keyboard and the mouse do not work on the new computer with Win 7 Home Premium

  I just bought a new computer game.  The keyboard and mouse work in BIOS.  But when win7 brings me to the first screen for all upward (which requires language and country options) both the keyboard and the mouse both stop working and their lights go out.  The mouse is a Razer Death Adder, who i saw possibly requiring drivers to be installed.  However, the keyboard is a 4000 ergonomic Microsoft natural and I expect that it works.  Can someone please help me get their work.  Any help is appreciated.

  I had damaged USB drivers.  Technical support from the manufacturer did to be operational.  Thank you all.

• Keyboard and the mouse do not work after upgrade to Windows 7.

  The operating system on this computer is Windows 7 Professional (64 bit), and the following updates are available:

  MS Security Essentials:
  Update for Microsoft Security Essentials - 4.7.205.0 (KB2994766) - Important

  Windows 7:
  Cumulative Security Update for Internet Explorer 11 for Windows 7 for systems based on the x 64 (KB3021952) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3004361) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3004375) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3013455) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3023562) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3029944) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3031432) - Important

  Update for Windows 7 for x 64-based systems (KB3004394) - recommended
  Update for Windows 7 for x 64-based systems (KB3020338) - recommended
  Update for Windows 7 for x 64-based systems (KB3021917) - recommended

  X 64-February Windows malicious software removal tool (KB890830) 2015 - Important

  The problems begin after that I installed these updates. After restarting the computer, I can no longer use my (HP SK - 2506 U) keyboard and mouse (Microsoft Wheel Mouse Optical). I have looked around through the forums and tried several suggestions; However, none have them worked, that's why I post here.

  For example, here are the methods that I've tried so far, while using a PS/2 keyboard connected:

  (1) to start the computer in safe mode only to find out that they keyboard and mouse don't always work.

  (2) went in mode Bios and the keyboard works until I leave.

  (3) Microsoft Fix It tool I tried for USB devices and he said that "the changes have been made", but it does not solve the problem.

  (4) I went to the Control Panel, type "Troubleshoot" > find and fix problems > material and audio > configuration of a device, and he says: "material changes may not have been detected."

  (5) download the drivers on their site, but they will not be installed because 'the latest version is already installed. "

  6) going to remove each USB root hub in Device Manager, and then restart the computer to reinstall the drivers. The computer recognizes the 'new' devices,
  but then fails to install. Also, when I check their error on each of the USB status then in Device Manager, I get an error (code 52).

  (7) I also tried to install an update, restart the computer and then install the update next to try to reduce down which one is causing the problem. However, this method does no more work. For example, I installed an update, then restarted the computer, and it would be nice. Then install the next update, and the problem would come back. I would therefore restore to a point earlier, thinking that the second update has been the cause of the problem only discover that the problem came back after first re-installation...

  I also tried to run a backup of my external hard drive, but it does not work. I also tried to create a system repair disc, and it fails too.

  So far, the only way I can "fix" this problem is if I restore my computer to an earlier point in the day and then hide all updates to install automatically.

  Now I'm wondering if anyone knows why these problems are happening or fix them for good?

  Hi Floyd,

  I appreciate the efforts that you have taken to solve the problem in a few important steps. Since it is a problem that occurs when you try to install updates for Windows, the driver may be signed or corrupted.

  Just a few questions in order to get a clear picture of the issue.

  1. make all the windows updates installed successfully?

  2. What is the full error message you see in Device Manager?

  Follow the thread and check them off below if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-code-52-USB-ports-not-recognizing-connected/2379017c-D513-478C-A184-0d1b7cd408b2?page=1&TM=1424751616733

  I MPORTANT this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  If the problem is not resolved, you can put the computer in a clean boot and check if it helps.
  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135
  Note: after the boot minimum troubleshooting steps, see how to reset the computer to start as usual after a clean boot troubleshooting.

  Get back to us if the problem persists.

• My computer recently started to freeze .i have win 7 64 bit pc. Ctrl alt PIF and the mouse do not work either. In the sound registry mainly id 10005 and event 7001

  For the error with the id 7001.

  "The network list Service depends on the network location awareness service which failed to start because of the following error:

  The dependency service or group was able to start. »

  -

  -

  7001

  0

  2

  0

  0

  0 x 8080000000000000

  60397

  System

  BazilAChaudhry

  -

  Network list service

  Network location awareness

  % 1068

   

  For the error with the id 10005

   

  DCOM got error '1084' trying to start the ShellHWDetection service with arguments "" to start the server:

  {DD522ACC-F821-461A-A407-50B198B896DC}

  -

  -

  10005

  0

  2

  0

  0

  0 x 80000000000000

  60391

  System

  BazilAChaudhry

  -

  1084

  ShellHWDetection

  {DD522ACC-F821-461A-A407-50B198B896DC}

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Put the computer to boot and see if the problem persists.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: follow step 7 to reset the computer to start as usual after the boot process.

  http://support.Microsoft.com/kb/929135

  Hope this information helps.

• Keyboard and the mouse does not work after the release of sleep

  Original title: error keyboard and mouse

  After you have installed Windows 8 I had problems with the keyboard and the mouse.

  If the computer disconnects a half our for example, when I come back, the keyboard and the mouse do not work,

  I can not connect and I have to restart my computer to the power button.

  How can I avoid this problem? It happens every day at least once.

  Hello

  1. you are using a wired keyboard or mouse and wireless?
  2. What is the brand and model of the PC?
  3. have you checked if other USB devices work on the PC after you resume the computer from sleep mode?

  I suggest you follow these methods and check if it helps.
  
  

  Method 1:
  If you use the USB keyboard and mouse, and then follow the steps below to uninstall and reinstall the USB controllers.

  (a) press the Windows logo and X from the keyboard.
  (b) type devmgmt.msc , and then press ENTER.
  (c) expand Bus USB controllers.
  (d) right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (e) restart the computer and reinstall the USB controllers.
  (f), check the question;

  
  Method 2:

  The 'USB selective suspend settings' option in the Power Options can be activated.

  (a) press X and WWindows logo and choose Power Options
  (b) click on change plan settings for the selected power plan
  (c) click on that to change advanced power settings
  (d) Expand USB settings and then the USB selective suspend setting and change them to disabled.
  (e) click OK in the power settings window, and then click save changes in the Edit Plan settings window.

  Method 3:
  If this does not help, I suggest to change the power to its default settings and check if it helps.

  You can follow the steps to do this:

  (a) press the Windows logo key and X set and choose power options.

  (b) under the preferred plans, click on balanced (Recommended).
  (c), click Change Plan settings and more balanced (Recommended) option.
  (d) click on restore default settings for this plan on .
  (e) click Yes to save the changes.

  Now check the issue.

  Let us know if it helps. If the problem persists, please answer, we will be happy to help you further.

• Clicks of the mouse do not work in IE9, Excel, iTunes and other programs.

  Clicks of the mouse are not working.  IE9, Excel, I-tunes and a few other programs.  It sometimes takes several mouse clicks, or in the case of IE9 when you activate the address bar or Favorites or even try to select a checkbox it seems that you must hold the button of the mouse down and after a few seconds, it will recognize the command.  With favorite IE9 you must hold down the mouse button and drag down to the place wherever you need to be communicated, then click on?  In Exel, the mouse cannot select multiple cells, in other programs her taking mulitple mouse clicks to highlight & copy text in the text example I've copied below from Microsoft answer Forum - I followed the instructions below and it did find and fix some problems, but there were others, he could not correct?  They were listed in another file, but I don't remember the name of the file, or how to access it?  I have run Norton 360 on my system and a complete analysis will detect all viruses?  Please advise?

  Thank you for using the Microsoft Answers forums. I suggest that you run the System File Checker. To use the tool (SFC.exe) System File Checker. To do this, follow these steps:

  Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  Type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  Thank you

  Andrew Pugh

  Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  Finally if all else fails, you can look at the rather cryptic system event log. To do that click on start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.

• Pencil tool (N) close the trace does not work, any idea?

  Pencil tool (N) close the trace does not work, any idea?

  with the completion of a path with the pencil tool, I don't get the small circle at the cursor level to close the path.

  Zoom click on the pencil tool in the tools Panel and you will see.

• I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  < re-titled by host >

  Take it to an Apple Store for repair or replacement.

• My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.

  Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.

• When I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.

  My Roxio VHS TO DVD movie editing program has worked on my laptop Toshiba Windows 7 system before I reformatted.  Now when I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.  When I close the program Roxio the resolution of the screen reverts back to 256 colors.  Control of program compatibility tells that it's incompatible, but the program worked on my system before I reformatted.

  Original title: programs Application Applications compatibility

  Hello

  You can install the program in compatibility mode and check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know the status.

• Bluetooth activate the keyboard and the mouse does not

  My compatible bluetooth keyboard and mouse do not work.  I tried to re - install using the disc Bluetooth wireless keyboard and mouse.  However, once you have started the program, I get the following error message... "" Sorry this version of the software is not compatible with your operating system. ""

  I have re-installed the software even before, but this is the first time this type of message has developed.

  Any idea would be appreciated on how to fix.

  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  How to setup a Bluetooth connection.

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  The problems with Bluetooth devices

  See you soon.

  Mick Murphy - Microsoft partner

• USB device not recognized (Nothing plugged and the mouse does not)

  My mouse (microsoft) wireless worked well until what within hours.
  then I said to unrecognized USB device
  The port works, but for some reason any
  the mouse is not, went bought another mouse and still getting the same message.
  Plus I get the USB device not recognized pop up, same
  Tho, nothing is plugged into one of the USB ports.
  Any suggestions on how to solve this problem

  Computer brand and model?  Windows OS?

  Open the Device Manager

  Click on the + sign next to USB controllers

  Do you not see that unknown device listed?

  Right click on the playlists of USB root hub

  Select uninstall

  Close Device Manager

  Restart the computer to Windows reload the drivers

  USB is now recognized?

  If failed, shutdown computer.  Unplug it from the electrical outlet.  Leave unplugged for 1 to 2 minutes.  Plug the unit in and restart the computer.

  USB is now recognized?

  How to troubleshoot USB device problems that can occur after a laptop computer that is running Windows Vista recovery from sleep or standby extended

  http://support.Microsoft.com/kb/953367

  Windows Vista does not recognize a USB external optical disc drive when you reconnect the USB optical drive to the computer drive

  http://support.Microsoft.com/kb/944292

  Run the System File Checker

  Right-click on command prompt and select run as administrator

  Type sfc/scannow

  Press enter

  Note: there is a space between sfc and / scannow

  How to analyze the log generated by the SFC Scan file:
  http://support.Microsoft.com/kb/928228

• Problem starting el capitan (sierra) - built-in keyboard and the mouse do not respond

  Hello

  I have a 2015 macbook pro (SSD 256, 16 GB of RAM last el capitan updated) with a wired problem.

  I use it mainly to a cinema monitor and I use wireless keyboard and mouse (office installation program), and of course as a stand-alone laptop when I'm not at my desk.

  When I put the laptop to sleep, everything works fine when I wake up.

  but, if I'm away from the office and I have to restart my laptop, here is the problem.

  The boot process is very very slow, there is no edge, and when I finally have the screen to unlock the safe, the keyboard and the touchpad do not react. Actually, that's not exactly true, they are so slow that they are unusable and get caught quickly, all gel. So I can't unlock and complete the boot. My laptop is unusable ;-(

  At this point, I get a message that if I forgot my password I just need to reboot by pressing the power button, and I'll be able to reset it.

  When I do this and aprΦs the dΘmarrage that more slowly than usual but ok, I get another screen with several options of problem solving. One of them is "keyboard not responding do not. When choosing this one, it asks if you want to remove safe. I tried and everything was back to normal.

  later, I delivered safe and I had the same problem again. I did the thing to be able to restart again and improved to sierra in the hope that it would disappear. However, the problem is still there.

  I thought I could try to restart my office to see if my keyboard and wireless mouse would still work. Indeed, even if responsiveness was not normal, I could unlock and fill the chest.

  I have the impression that my laptop always "believe" it is on my desk, linked to my screen (probably the reason why I don't hear the Bell) and to my wireless K & M.

  It's really annoying and I hope someone has a solution.

  Thank you very much

  best,

  Alex

  I'm having a similar problem with macOS Sierra which I didn't have with El Capitan.  I can possibly move the cursor on the power button and turn off (no), but I must be patient because the keyboard and trackpad are only for a fraction of a second, which only allows me to move the mouse slightly.  After he stop and start back up, everything is perfect until I tried another reboot, and then I'm back to the beginning.

  I tried to reinstall the operating system, reset the SMC, resetting the NVRAM, reboot in SafeMode... nothing worked so far.

• Aspire S7-391 pointer has disappeared and the trackpad is not working

  Hi all

  I've updated my Aspire S7-391 to 8.1 Windows and now the trackpad is not working, nor the pointer is displayed on the screen. Can I use a USB mouse without problem, and the touch screen works very well. However, even after you have installed the latest driver to trackpad MOMENTUM and by adjusting the settings, the pointer refuses to appear on the screen. Suggestions for corrections are most appreciated.

  Thank you!

  Hello..

  You can press and hold down the Fn key and press the T key to check if the touchpad works.

  If you have no answer, please uninstall the driver from Device Manager and restore the Acer recovery management pilot.

• XP update causes background to disappear and the display is not working.

  When XP (Home, SP3) update 15/03/2011, it caused my desktop background to disappear and I can't get it back.  It has already happened with improvements, but usually, I was able to get back on the bottom.  But this time, if I go to control panel > display, it does not.  Unresponsive with a right-click on the desktop and no properties.  Tried to restart and reinstall the display driver and still nothing.  With the help of a videocard ATI Radeon HD5700.  Any ideas?  Thank you.

  I managed to fix it yourself using the method described on this site:

  http://benosullivan.co.UK/Windows/Active-Desktop-recovery-error/comment-page-6/#comment-16459

  Who has worked for the first time, so for many people who have had this problem without a solution, there is something to try.