Hi, I have a HP S3541 [UK model number] and mouse and the wireless keyboard provided the two "Act to the top". Intermittently, the ladies of the keyboard off letters completely / is slow to respond and the mouse is the same, lapse nervousness and almost like 'time '. Only, I bought this system 5 weeks ago. I tried "test center" in HP Advisor and the 'good' but keyboard is not working properly. They are both less than 1 meter from the screen/computer and since 'odd' new. I ' ts my first keyboard/mouse wireless and at first glance, it was 'normal' but it may not be. Ideas or are they just rogue copies?
Thanks for any help,
Try the procedure described in this article from hp:
Tags: HP Desktops
The keyboard mouse touchpad has stopped working and I can't find a way through Control Panel to fix it. The external mouse through the wireless works fine, but I can't use the keyboard mouse at all.
Go to the Settings Manager to your Toshiba, by clicking on the Start button in the lower right corner, click the arrow on the down in the lower right and then look for a program called system listed among Toshiba services settings. Go to keyboard and see if you can change all the settings it will allow you to turn the keyboard on or off. If none is listed, then go to your BIOS manually and see if it allows you to toggle the keyboard. Your numlock and capslock has a light on them to indicate that they are on?
EDIT: I also found this when you browse the forum, it may help.
Press CTRL ALT SHIFT to get your process to come. Find the Touchpad "enhancer" process. Complete the process. Your touchpad works until the next reboot, how simply repeat this step.
If you're struggling complete the process without being able to use your touchpad, I discovered a curious thing. If you hold a mouse click, you can move the arrow of the mouse with the touchpad very well. Its a bit... awkward... but all you have to do that is to end this process and after that, you can use the trackpad normally.
I have a problem in game with my keyboard/mouse combination.
When I run it, I can't draw.
I changed the keys, mouse, connected to an external keyboard, checked drivers mouse and keyboard. Any extract, which makes me think that it is a driver/hardware problem. First time I noticed it, I thought it was a bug in the game. Now I have a new problem.
The games that I have encountered the problem: Borderlands 2 and Rainbow Six Vegas 2
Satellite L670 - 1 L 4
Windows 7 operating system
Mouse: Trust model #16336
As far as I know the mouse and keyboard drivers are the drivers Microsoft and Toshiba doesn't offer drivers for these devices except the driver for the touchpad to improve the touchpad options. I don t think that Toshiba is testing the feature with different games.
Confused, it's that you have noticed the same problem using the external keyboard and mouse.
Is there a possibility to test it with some older games?
What combo (keyboard and mouse) wireless are most compatible with my computer (budget $ 100). I have a Microsoft Wireless series that gives me a lot of questions and I decided to replace it.
Thank you very much.
I trust to Logitech and not bought 1 but 5 games (combo; 3 K710 and 2 sets of K330 cheaper). K710 price in my country is about $110:
Our dollar is now much lower, you'll find maybe around $75 or less to the United States.
What model of Logitech wireless combo keyboard/mouse that works on a TV KDLEX645
Use of a keyboard or a wireless mouse is not supported with the Sony TV. Only a standard USB mouse and USB keyboard can be connected to the USB ports on the TV to navigate on the Internet browser.
If my post answered your question, please mark it as an "accepted Solution".
How to fix the erratic movements of MS 6000 v3.0 wireless keyboard/mouse device?Mouse and keyboard stops responding at any time then begin to respond to every 2-5 seconds. Very frustrating. Is Microsoft doing something that works correctly?
· What operating system do you use?
· There recent changes on your computer before the show?
Try the following methods and check if it helps.
Follow the steps in troubleshooting this article and check if that helps.
Troubleshoot the incidents of the response to the mouse or wireless keyboard
Also, follow the steps in the article, and check if that helps.
The pointer may behave erratically when you try to switch between two computers that are connected to a single Microsoft pointing device
Keyboard-mouse 5188-6816 has stopped working. The "connect" to connect the keyboard and mouse to the USB connector no light no more on the USB connector. Technical support said I had to replace the USB connector. Are offered through HP? How can I find one?
Your 2.4 GHz wireless keyboard mouse combo is not delivered with a usb cable.
It uses a usb dongle which connects the keyboard and mouse to the PC destop wireless.
You can't buy a replacement dongle.
A wireless dongle is coded permanently to the pairs of keyboards and mouse at the plant combos.
Your technical support must have told you that.
If your keyboard was bluetooth it would have been a different story and a generic Bluetooth dongle replacement could have been bought.
Original title: Microsoft Wireless Multimedia Keyboard & Mouse 1. 0a
Our offices are using Microsoft Wireless Keyboard & Mouse multimedia 1. 0a. It works very well until recently, when a person entering a room the other rooms will pick up what is typed by the other person. I've tried re-sync alll the device but no luck. Any suggestions?
Thanks for posting on the Microsoft Answers forum. What is the approximate distance from the PC which is picking up a false signal? The range for this device should be about 6 feet.
If you have the latest drivers for your device, then download and install the latest from here: http://www.microsoft.com/hardware/downloads/default.mspx once you have the latest version of the installed software I would suggest turning all off the PC. Then sync them one at a time all are off the other pc.
Let us know the results. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.
After several attempts, using the two P/s2 USB keyboard & mouse and keyboard & mouse I can't use my keyboard or mouse when log in to XPThanks Charles
· Were there recent changes made on the computer before the show?
We recommend to use a different mouse and keyboard, then check the result. If the problem persists, try the following steps.
I suggest to boot into the BIOS and check if keyboard and mouse are getting detected.
Warning of the BIOS:
BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
I suggest to start in safe mode and check if you are facing a similar question.
Try to complete the restore of the system in safe mode and check if it helps.
How to restore Windows XP to a previous state
Also try to uninstall the mouse and keyboard from Device Manager drivers, restart the computer and let Windows install the drivers.
How to manage devices in Windows XP
Also try to run the Microsoft Fixit from following link:
Hardware devices do not work or are not detected in Windows
I lost the transmitter of USP port for a combo keyboard/mouse Wireless Windows (7000 ergonomic natural). Can I buy it separately? I can only find when sold with the keyboard or the mouse. Please provide an exact figure and where to buy. Thank you!
You can check out the link below and check if this may help: how to replace software or hardware, packs Microsoft service to order and replace product manuals: http://support.microsoft.com/kb/326246
Natural Ergonomic Keyboard 4000: http://www.microsoft.com/hardware/en-us/p/natural-ergonomic-keyboard-4000/B2M-00012
Whenever I have withdraw my T61, my keyboard & mouse (TrackPoint and TouchPad) become inactive. An external mouse works OK, but again I do not have a keyboard. Any idea?
Installed some updates from Lenovo and the problem disappeared.
keyboard & mouse freeze after the mode "sleep", using Windows Vista 64 home premium. I received once posted this question, an answer of "fix" to a thread that has worked. Unfortunately, I deleted the thread. I swapped the USB connectors for mouse and keyboard, but that didn't change anything. Could someone please re - send the wire? I promise you that I'm deleting it this time.
Thank you very much
Follow these methods.
Method 1: Follow the steps in the article.
Device Manager does not display devices that are not connected to the Windows XP-based computer
http://support.Microsoft.com/kb/315539 (applies to Windows Vista)
Method 2: Scan the file system (CFS) auditor to repair corrupted files.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
Method 3: Create a new user account.
Create a user account
If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.
Difficulty of a corrupted user profile
Microsoft Wireless Desktop Keyboard/Mouse 6000 V2 does not work properly. The mouse does not allow me to use the wheel to scroll down to option and when I look at the drop down list, it does not keep list open. It opens and closes the list immediately. He continues to return the list to the top of the drop-down list. I checked the batteries in the keyboard and the mouse (replaced) resync'ed the two keyboard and mouse ports changed the receiver performed in and checked for update on both keyboard and mouse and have restarted my computer several times and it still does not work properly. I bought this Office Microsoft Wireless Keyboard and mouse 6000 V2 there are three 3 months and he can't take back to store because it has a warranty of 30 days of the store. Help.
Try it on another machine to ensure that it is not the lack of equipment.
And make sure you have the latest drivers/software installed for him.
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
See you soon.
Mick Murphy - Microsoft partner
What type of wireless keyboard/mouse is compatible with a Sony Bravia KDL55HX750 TV? I am looking to invest in a secondary remote control / keyboard /mouse to take remotely wear off the original supplied with the game. Any help is appreciated! Thank you.
There is no compatible mouse or keyboard (wired or wireless) to any Sony TV right now however, USB keyboards can be used in players Blu - Ray from Sony (model specific).
If my post answered your question, please mark it as "accept as a Solution.
I'm trying to deploy Windows 7 for Optiplex 7040 using SCCM 2012, I downloaded ACR and imported the drivers, I have also injected the Ethernet drivers and it is very much the startup of WinPE.
At this point I wonder my SCCM Build password, but the USB keyboard/mouse work.
I tried adding and removing the USB of the cab drivers to the boot image, but nothing helped.
I've added all physical of the cab drivers and removed all the USB drivers to make it work.
Maybe you are looking for
Guyz! This will be good news for all those who want to wear metal ESXi W530 5.1. With simple clicks of customization, the whole installation runs smooth and Nice. For those who are interested. Answer in the thread and a lot of fun to share with you t
ASUS m2n68 - la, bios 5.09 15/05/2007 I want to upgade to an AMD Phenom Quad-core processor. So what should I do or buy if possible?
Hello world I use Win Server 2008 We have 3 NAS drives in the server. I can copy all the files to two hard drives. But in one reader I can't copy files to that. When I tried to copy the file I get an error "There is not enough space to complete the o
Hello I want to offer Hibernate option in my VI which runs on Windows Embedded Standard 7 operationg system. So please suggest me possible solutions as appropriate.
I raised suspicion that the intel VGA drivers installed cause me a BSOD (which happens when I alt - tab of a video game using the NVIDIA VGA drivers for my deskptop). I'm trying to update the drivers for Intel VGA found here http://us.acer.com/ac/en/