Keyboard problem, when I try to type a part of the end of the words by be numbers.

Similar Questions

• Permissions problems when you try to run any adobe app, the tech support guy even after trying to fix it for 2 hours

  I don't know what to do. One of my adobe applications gives the same error:

  Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  The above-mentioned tech support person was a test account, he did and has spent a lot of time doing stuff with all permissions to the adobe files. Finally he got it so at least to launch illustrator, then immediately crash. He just left without a job too shortly after.

  I am running windows 7, 64 bit. On my own personal computer. Help, please

  Note: I also had problems with creative cloud, who managed to get fixed

  Caps folder contains the database as Cache.db, media, db, pdb.db file that contains information about the installation of applications on the system and other essential data, in some cases if the files are corrupt, it is essential to remove the record of caps.

  Once you remove the record of caps, CC app will list Apps with button install because there is no information concerning the installation of the CC apps because the Media.db file will be deleted with it.

  In this case, it is preferable that you uninstall applications that is not listed as up to Date and being listed with button install, even if it is already installed.

• When I try to type an address in the address bar it tells me that "the required search key is not found in any assets of launch context" what should I do?

  error messages

  Charlene255,

  Thank you for visiting the Microsoft answers community. I think your question would be better suited in the Microsoft Technet (Internet Explorer Discussion) found here:

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/thread/a1f845c0-0638-463a-8627-59110e4b8a3b

  I hope this helps.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you try to open a file of the photo to view the photo, it will automatically to the hp print model

  Original title: hpc309A printer

  In Windows 7, whenever I try to open a file of the photo to view the photo, it automatically goes to the hp print template.  It's so frustrating when I want only to view the photo.  Help, please!

  Hi MonroeBroadway,

  Welcome to the Microsoft community. According to the problem when you try to open a file of the photo to view the photo, it will automatically to the hp print model.

  ·         Did you do changes on the computer before the show?

  I'll help you with this problem. This could be a file association problem. I suggest you to follow the steps in the article and check.

  Change the programs that Windows uses by default

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  I hope this helps. Let us know if you need help with Windows.

• When I try to type with the keys that have numbers on them, I have numbers instead of letters.

  The keyboard of my laptop does not work correctly.

  I have somehow turned the keys of the calculator and when I try to type with the keys that have numbers on them, I have numbers instead of letters.  Does anyone know how to disable this option?

  I use a laptop with a wireless keyboard to send this message, but want to use my laptop keyboard.
  Help!

  Hi newsgirl,.

  Somewhere at the top of the laptop keyboard is a key that says Num Lock (or Num Lk or something like that).  It can be accessed directly, or you may need to press a key to access (or some other keys).  In any case, you must click this to turn off the number lock because it is what causes the problem.  This key is usually used on laptops to create a section of a regular keyboard that can act as the normal keyboard calculator keypad (for those who need that, like accountants or persons who need to enter strings of numbers).  Once you turn it off, you will be fine as the keyboard returns to normal.

  I hlpe that aid.

  Good luck!

• When I try to type on the bar or crashes my firefox search engine. How can I fix? I can surf between sites, but when I try to type something blocking firefox.

  It was a typical day. I wake up and check my places as usual. But this weird problem started suddenly to crash my firefox. When I try to type google search box, firefox search box or bar firefox crashes to address. I use Kaspersky Pure and no sign of the virus. Can I visit the sites normally. Other computers in my house don't crash like this. I'll send this issue on my laptop.

  Create a new profile as a test to see if your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.com/kb/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  See:

  • http://KB.mozillazine.org/Firefox_crashes
  • https://support.Mozilla.com/kb/Firefox+crashes
  • https://support.Mozilla.com/en-us/KB/latest-Firefox-issues

  If you have submitted incident Breakpad reports then validate the ID of one or more reports of incidents Breakpad (bp-xxxxxxxx-xxx-xxxx-xxxxxxxxxxxx). You can find the ID of the crash on the topic submitted reports: page crashes. You can open the topic: blocking the page through the address bar, you open a Web site.

  See:

  • http://KB.mozillazine.org/Breakpad (Mozilla Crash Reporter)
  • https://support.Mozilla.com/kb/Mozilla+Crash+Reporter
  • https://developer.Mozilla.org/en/How_to_get_a_stacktrace_for_a_bug_report

• iPad 2 returns to the home screen when you try to type in the search bar

  Hello

  My iPad 2 is a return to the home page when I try and type in the search bar of safari.

  Have released the story, the iPad, but it made no difference and ideas how to fix?

  Obviously a problem on the end of Apple but try settings > Safari > Safari Suggestions > offshore, for now.

• on my key board when I try to type a letter that has a number or a symble on it it type the number or the symble how to fix this?

  on my key board when I try to type a letter that has a number or a symble on it it type the number or the symble how to fix this?

  Make a lot of assumptions here...

  Keyboards only I know who have numbers/symbols on the letter keys would be a laptop or netbook without a numeric keypad.  Assuming that this is the case, the most likely cause is that you have the 'digital Locks' active.  To return to a regular keyboard, you must disable the NumLocks.  On a laptop, how to do varies from a Builder (in other words, if that doesn't work, download or consult the manual of your computer)... but usually this is done by pressing the "FN" key at the bottom of the keyboard while pressing the 'Num Lock' key, which is usually on the box at the top right of the keyboard.

  HTH,
  JW

• It is possible to run Adobe Bridge CS6 on my Toshiba 32 bit?, I don't know why, but when I try to run this program, then the DEP blocks Adobe Bridge, what's the problem?

  Adobe Bridge CS6 on my Toshiba 32 bit?, I don't know why, but when I try to run this program, then the DEP blocks Adobe Bridge, what's the problem?

  This means that the program will use the incorrect memory or he is attacked by hackers or virus. See if there is an updated version.

  To allow the program to function in any case type DEP in the Start menu - Help and Support.

  Help

  Change Data Execution Prevention settings

  Data Execution Prevention (DEP) is a security feature that protects against viruses and other security threats by analyzing your programs to make sure that they use the system safely memory.

  If you choose to protect all programs, you can always turn off DEP for individual programs. If you think that a program does not run correctly when DEP is enabled, check for a compatible version of the DEP program or an update from the software publisher before you change your DEP settings.

  1. Click to open the system.

  2. Click Advanced system settings.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Under performance, click settings.

  4. Click the Data Execution Prevention tab, and then click turn on DEP for all programs and services except those I select.

     To turn off DEP for an individual program

     • Select the check box next to the program that you want to turn off DEP for and then click OK.

       If the program is not in the list, click Add. Navigate to the Program files, search for the executable file of the program (it will have the .exe extension) and then click Open.

     To turn on DEP for an individual program

     • Clear the check box next to the program that you want to turn on DEP for and then click OK.

• Windows media player error "Windows Media Player has encountered a problem when you try to read the file" after burning CDs.

  Original title: "missing songs" in my windows media player then burn them on several cd :((

  I burned songs to several cd using my Windows media player to make different Cd, but after I returned to my library all the songs that I burned to the CD have disappeared, they are there, but they won't play it is as if they have been deleted, a window appears saying that windows media player has encountered a problem when you try to play the file. I did not notice this until after Cd burning a few I can't do more because if I keep going I'm not going to have more songs in my library! I don't know what to do im going crazy, it took me a long time to get all of these songs and now he disappeared! I have Windows 7 Ultimate is the version 12.0.7601.17514 hope that helps

  Hello
   
   
  They were playing before you burn CDs?
   
   
  Method 1:
  
  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
  Open the troubleshooter in the Windows Media Player library:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
  
  Method 2:
  
  This problem may be due to database corruption. You can delete the Windows Media Player database and check if the problem persists.

  Steps to clear the database of windows media player:

  a. exit Windows Media Player.
  b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
  c. Select all files in the folder and then click on Delete on the file menu.

  Note you don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.

  b. Click Start, click Run, type % LOCALAPPDATA%\Microsoft and then click OK.

  c. Select the Media Player folder, and then click on Delete on the file menu.

  d. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

• ADE 2.0 and 4.0 do not work with Windows 10. The next problem is generated when you try to download a book from the public library.    Error getting License Server Communication problem E_ADEPT_DOCUMENT_OPEN_ERROR.

  The next problem is generated when you try to download a book from the public library.

  Error getting License Server Communication problem E_ADEPT_DOCUMENT_OPEN_ERROR.

  The work around works of Jean.  It would be nice if Adobe provided a real difficulty however.

  I have ADE installed 4.03.  The problem will occur as soon as that ADE is closed and reopened.    It takes so the patch every time allows you to download a book ADE.

  1. for Overdrive - select a book and click Download. -pop - up - select - Save file. - under the open with select - acsm_auto_file - download the file of social mobilization in your download directory.

  2. expand the Explorer open the file - go up to the OS (c)-

  -go to Program files (x 86) - enlarge

  -to enlarge Adobe

  -go to Adobe Digital Editions and the left click.

  -On the right part of the screen right click on Digitaleditions.exe.

  -Pop - up menu - on the left, click PROPERTIES

  -Pop up to select COMPATIBILITY

  -at the top of the menu compatibility, choose the resolution of compatibility issues run

  -Pop up to select the troubleshooting program

  -Pop up choose the program worked in earlier versions of windows, etc.

  -on the left, click NEXT

  -POP up - which version etc? Choose that I don't KNOW

  -on the left, click NEXT

  -POP - up - left click Test Program-

  -AT THE TOOL Avantek of window screen, a FLASHING ICON will appear - left-click on the icon - a pop-up will ask you if you want this program to change etc. On the left, click Yes.

  3. ADE open - make sure ADE is in library view.

  -Left click on FILE and then select Add to LIBRARY from the menu drop down.

  -POP UP - down to the right to choose the type of file of social mobilization

  -left side of the pop up to choose the directory where you downloaded the file of the CMHA.

  -Select the file of the CMHA in the right side of the window and on the left, click OPEN

  -It should work, but you have to go through the whole routine if you close ADE.

  I HOPE ADOBE will solve this problem. With each update of Windows 10 ADE seems crumbles a bit more.

• XPCOM. error problem when you try to open Thunderbird

  Hello - I can't open Thunderbird more. When I try to open Thunderbird, I receive the following error message: XPCOM. and no matter what I do, the same message continues to appear whenever I try to open Thunderbird. No access to Thunderbird, everything I try. I rely on my phone to receive emails, but have my laptop mail works correctly. Anyone has a solution please? I don't want to stop using Thunderbird, but I need a quick fix if anyone has a solution. Thanks in advance. Best regards, Tony Brown

  It is with version 31 or 38?

  (If version 38, so please download from https://www.mozilla.org/en-US/thunderbird/ and reinstall 38)

  If you fail again, please start * Windows * safe mode with active network
  -win8 http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-safe-mode
  -win7 http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
  - Http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx XP

  Always in Windows safe mode, start thunderbird in safe mode
  - http://support.mozillamessaging.com/en-US/kb/safe-mode

  Problem disappear?

• Problems when you try to move the 3 stepper motors

  Hello

  I have problems when I Isaiah to compile a 3 stepper motors control program.

  I have 3 steepest motors and controller (3 SMCP33 + SMCP33-EVA) nanotec.com, they also provide an example of Vi to control a motor that works successfully, but problems happen when I try to adapt the program to try to start the 3 Motors. The final application for this is going to be a Cartesian robot XYZ so finally I need to program coordinates to move the 3 Motors.

  I am new to LabVIEW, so what I do is try to adapt the nanotec example to order 3 engine as follows.

  -J' I assign each engine a different address, doing so that I can run each engine separately. But when I try to run 3 programs at the same time, they work but all moving them the engine (the first that has been run).

  -If I try to make a sort of sub - VI is the same thing, only one motor is driven.

  -Moreover, I get a warning when I try this, I have attached a screenshot of this.

  I have attached the Vi and texture it to improve my description.

  I woul be grateful if someona can help aport.

  Kind regards.

  Thanks for posting the original.  By comparing the two screws immediately gives an indication of what might happen.

  In the picture you posted you circled two places where you changed the address of the reader. In the Example.vi - Nanotec address of the player is connected to about 14 seats.  So when you try to run the other engines in your modified program, the 12 places, you have not changed the address of the player are always preset to motor 1.

  What you need to do is to divide the example VI in at least three parts.  The first part initialization. The next part moves the engine.  The last part ensures that the engine is stopped and made any required another stop.  Each party becomse a separate Subvi. Each Subvi has the address of the reader as input.  The initialization and shutdown parts are placed before and after a while loop.  The movement parts are inside the loop.  You can use three of each sub - VI for the three engines or a Subvi combined with subVIs move three to manage all three engines.

  I can't say what approach might be better without knowing more about how you plan to order the engines - one at a time or all three at the same time, what kind of feedback is used, how management mistakes and other topics.

  Lynn

• I suddenly have a problem when you try to download I get this message. "Cannot transfer to Internet Download manager." 0x8002801D error

  Error of the IDM

  I suddenly have a problem when you try to download I get this message. "Cannot transfer to Internet Download manager." Error 0x8002801D in windows XP. Pleasw help to y for remedy.
  Thank you

  Hello

  (1) what you're trying to download?

  (2) how you try to download?

  (3) what browser you are using to download?

  (4) don't you make changes to the computer until the problem occurred?

  Step 1: This error occurs when your browser and IDM are set to run under different privileges.

  Maybe you have set to run IDM with administrator rights. This is not correct. IDM Ouvrezledossier if please, right-click on 'IDMan.exe', select the 'Properties' menu item, switch to the "Compatibility" tab and uncheck the checkbox "Run this program as Administrator" (arrow 2 on the image). In addition, you must remove the compatibility with previous versions of Windows if there is none activated (arrow 1 in the picture).

  

  If this does not help, try to do the same for the executable file of your browser. In addition, turn off the feature with older versions of Windows and "Run this program as Administrator" checkbox.

  Step 2: You may need to run IDM with administrator once rights to register its DLL files. Exit IDM using "Tasks-> output" of the main menu. Then right click on IDM launch icon in the Windows (arrow 1 in picture) programs launch menu and select "Run as Administrator" (arrow 2 on the image).

  

  Then exit IDM again and run normally.

  Hope this information is useful.

• When you try to download iTunes I get the following error ' there is a problem with this windows package install a program required for this install complete could not be run.

  Problem Windows install

  When you try to download iTunes I get the following error ' there is a problem with this windows package install a program required for this install complete could not be run.

  I looked at several forums and tried cleaning patches, etc they suggest.  I also tried to download Windows Installer 4.5 but keep says "the update does not apply to my system" (I tried all.)

  I am running Windows Vista and have downloaded the service pack 2 (one remedy suggestions!)  Someone out there has a solution?

  Hello, Atwitsend...,

  Try to repair.
  Go into Add Remove Programs, then select Apple Software Update > change > repair.

  If this does not work, try to uninstall. .

  Remove and reinstall ITunes, Quicktime, and other software components
  http://support.Apple.com/kb/HT1923

  Download the iTunes Installer and save it on your desktop.

  http://www.Apple.com/iTunes/download/

  Try to install iTunes using the installer that you saved.