Keyboard problems after upgrade to Windows 8 Pro

Similar Questions

• Satellite L855 - 12N - keyboard problem after upgrade to Windows 10

  Greetings friends,
  the problem goes like this: I have a TOSHIBA satellite, L855-12N, Series notebook.

  After updrading to win 10, some of my keys (a, n, enter) did not work initially.
  If I wait for awhile, they start work later.
  I find that I continue to press a button, (for example the button "a") for a long time, I see that he started to answer, then stop again and then answer - stop, until finally it works OK.
  I tried to update the drivers, uninstall and then reinstall, but it doesn't seem to work.
  Anyone know what's going on, or have any suggestions?
  Thank you.

  You are 100% it's a matter of Windows 10?
  Looks more like a hardware problem, keyboard should replace.

  Go into the BIOS and test the keyboard in there.
  If it goes into the BIOS and then replace the keyboard.

  If it's a software problem, try uninstalling the driver for the touchpad Control Panel, then reinstall it via Windows Update.

• Keyboard problems after upgrade to Windows 10

  Hello

  I have problems with my keyboard as by chance after I had updated to windows 10. Right now my "6" does not work and when I press '5' key he made just the following '5666666666666666' and keep repeating 6s forever. If I press the left button down 'ctrl' it is also the exact same thing as the number five keys when you press. I ran utility troubleshooting of windows, so that my driver was updated, and can not solve the problem. Now I'll have to use an external keyboard to type this message. I wonder if I'm to potentially the keys being stripped or is it a problem of windows 10. It causes work very well when you type with the on-screen keyboard and an external keyboard. I have messaged microsoft and they told me the following:

  Method 1:
  Try changing the keyboard layout of the English (United States) type language in the search bar and try to change the layout of the keyboard and check if the problem persists. This is to check if this is due to the keyboard layout of the related issues.
  Method 2:
  Try to install the drivers for the keyboard in compatibility mode and check if the problem persists. This is to check if this is due because of compatibility issues.
  Now, to install in Compatibility Mode, follow these steps:

  a. Locate the executable file (.exe file) for the driver installation program.
  b. right click on the file and then click Properties.
  (c) in the Package name properties dialog box, click the Compatibility tab.
  d. Click to select run this program in compatibility mode for check box, click Windows 8 with which it is compatible with in the run this program in compatibility mode for the list, and then click OK.
  e. double-click the executable file to start the Setup program.

  problem is that I don't know how to do the second method

  Any suggestion would be great

  Thank you

  Hello

  There is usually no associated with a built-in keyboard driver. Looks like something is off with the material.

  It is unlikely that this would cause the actual update of Windows 10. It is possible that the connection between the buttons '5' and '6' are short-circuited, the computer stop typing "6" after a few hours.

  If you have a handy toothpick, run it on the sides of the 5 and 6 keys while the machine is turned off. It can clear all grime, press 6.

• Thunderbird impossible sendmail on mail server yahoo after upgrading to Windows 7 Pro on an ASUS BP1AD PC. Tried 31.2 24.6 configured in IMAP & Thunderbird.

  After recently upgrading to Windows 7 Pro on an ASUS BP1AD PC, I can receive emails but NOT send using the yahoo mail server. I am set up to use the IMAP protocol. Other e-mail servers/accounts do not have this problem. I get the error message right is an alert which States: "an error has occurred when sending mail. The mail server responded: unverified address - see http://help.yahoo.com/I/us/yahoo/mail/manage/sendfrom-07.html. Please make sure your e-mail address is correct in your mail preferences and try again"if my email in Thunderbird is good enough upward with i. sending messages. Is there something obvious that I'm missing?

  did you actually check your mailing address in your web account to yahoo? That is to say had them send you a special courier to check that it actually works? Sounds stupid, but they made me do it years ago.

• I will face any hardware problem after upgrade to Windows 10?

  Original title: upgrade Windows 10

  I have a Dell Vostro 1015 running windows 7 Professional. I am considering upgrading to Windows 10. Please advise if there are problems if I upgrade any hardware after upgrade to Windows 10, e.g. upgrade or downgrade RAM.

  Hello

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you want to upgrade your Windows 7 operating system Windows 10 machine. I will certainly help you get this fixed number.

  I suggest you refer to the mentioned Microsoft articles below and check if this is useful:

  Upgrade to Windows 10: FAQ

  http://Windows.Microsoft.com/en-us/Windows-10/upgrade-to-Windows-10-FAQ

  Hope the helps of information. Please write back to us for any further assistance. We will be happy to help you.

• In the 8.1 Fusion after upgrade from Windows XP Pro to Windows 7, the NIC cannot connect to the net.

  Looking for the right place to post, so if my post does not belong here, please let me know where.

  The problem:

  Updated to 8.1 Fusion Fusion 7 where I had a Windows XP Pro. After the merge upgrade I have upgraded to Windows 7 and followed the steps in the video by Stephen Gardner based on "upgrading a virtual machine VMware Fusion of Windows XP to Windows 7 (1015396).

  After the removal and the reinstallation of the network card I have no network connection.

  I tried to disable the Windows Firewall on the virtual machine and I gave permission to Fusion App and start App to run in the Norton Firewall on Mac.

  I uninstalled and reinstalled VMware tools and tried different settings for the network card, but nothing gave me the connection to the network

  Anyone else has this problem, or can tell me how to fix?

  Thanks in advance.

  Fusion 8.1.1 upgrade solved the problem.

• Satellite L40t-b917 - sleep problem after upgrade to Windows 10

  Name: satellite product L40t-b917

  Operating system: Windows 10 (64-bit)

  Hello

  If I have problems with the mode 'sleep' after that I upgraded to Windows 10. When I try to resume my laptop from sleep mode, Toshiba screen seems then the unit turns off.

  After 2 hours of searching on the internet I found that a solution said that my drivers are too old. So I tried to download but my drivers resembles not yet supported.

  Any solution to this problem?

  Where can I download updates for my device?

  Thank you.

  Hello

  Go to control panel and uninstall the Touchpad, display, wireless and sound drivers/utilities.

  Restart, and then run Windows Update to install the updated Windows 10 compatible drivers.

  Make sure that the BIOS is also the latest version.

• Finger print reader does not work after upgrade to Windows 8 Pro - DM4 2055BR

  I updated my previous Windows 7 to Windows 8 Pro Edition and the Finger Print Reader no longer works. Validity software driver is already installed more simple pass, but when I run the Easy Pass it pops up the message "the drive is not connected, connect the drive.

  I noticed one lot of other posts related to the same issue, but I don't know if the model of my laptop does not support the new version of the operating system.

  I appreciate if someone could help me with this problem.

  Dulao35,

  Welcome to the HP Forum!

  When start you / see: Easy going on?

  You may be running HP SimplePass Version 8.0.0.57 or some other SimplePass 8.x?

  ======================================================================================

  You can run HP SimplePass Version 6.x later on your computer.  You may also be able to get SimplePass version 8.x if you want to stay with this version to work.  It's a personal choice, really - either version should be able to work on Windows 8 Pro.

  Note that the version 8.x SimplePass seems to dislike everyone, but the Internet Explorer browser. This is a personal observation and NOT what can known by other users.  If you use IE, then the point is moot.

  You can probably keep your existing driver of the fingerprint (Validity Sensor in the Device Manager) as long you run the version compatible with Windows 8, illustrated to the webpage of your computer driver:

  HP Pavilion dm4-2055br Entertainment Notebook PC Drivers

  See below for a method that you can use to upgrade HP SimplePass:

  Simple Instructions for upgrade HP SimplePass

  The bits on SimplePass version 8.x are towards the bottom of the file.

  Click on the star of congratulations !

  It's a nice way of saying 'Thank you' for help.

  Although I strive to reflect best practices of HP, I do not work for HP.

• WiFi problem after upgrade to Windows 10

  Greetings!

  I read a few posts on WiFi problems after the (improper) upgrade of Windows 10. I have a ThnkPad T530 which I've upgraded to Windows 10 Windows 7 in September (too late to roll back). Here's my question:

  I have three computers on my desk. This standard T530 running Windows 10, a ThnkPad E555 running Windows 7 and a Dell running Windows 8. I used all three last Friday. I installed Norton on all three Friday and everything went without a hitch. When I first started their return to the top of this morning, the two others came online as usual. The ThinkPad T530 connected by a router in the company, but has no access to the internet. I can connect to the hotspot on my phone and it connects fine. I tried to turn the WiFi connection and then turn it on again, restart, by killing and restarting the business connection, etc. Nothing changes.

  Help, please

  Ben

  Try the following:

  Open administrator command prompt:
  http://winaero.com/blog/how-to-open-elevated-command-prompt-in-Windows-10/

  Then, run this command:
  netsh int ip reset c:\resetlog.txt

• can I reuse my retail ultimate vista after upgrading to windows 8 pro

  Hello

  I read somewhere that after upgrading my Vista Ultimate retail copy to Windows Pro I can reuse the key product & Vista Ultimate DVD on another computer, is - it true?

  Thank you

  FLOSS

  Hello

  No, it is not true.

  If you upgraded from Vista to Windows 8 using the Vista license under the qualification of license, the license of Vista becomes an integral part of the legal license of 8 Windows and you are not allowed to install Vista on another computer.

  See you soon.

• Dell XPS Ultrabook 12 has network using WIFI connection problem after upgrade to Windows 10

  I have a Dell laptop XPS Ultrabook 12 that worked fine on Windows 8.1. When Microsoft prompted me to sign up for upgrade to Windows 10, I hesitated, but finally, I signed up for it. In recent months, I have been asked several times upgraded to Windows 10 but I just ignored and delay the update as much as possible, because I need to work with the laptop and I can't afford to have problems after the upgrade.  To my horror, Microsoft forced an install of Windows 10 this morning without allowing me to delay and just after the upgrade, I can't connect to my existing network. I have therefore no access to the internet and I am currently typing this complaint using another PC. I noticed that the laptop can connect to the network automatically when I walk my router but the connection will last only a few minutes, and then he'd cut off. I tried to connect and the message I get is "unable to connect to this network. I checked with "ipconfig/all", wifi said media disconnected. I checked with the Dell support website and downloaded and installed a newer driver, but the problem persisted. Apparently the surf on the internet, this problem is faced with a number and any suggestions to fix do not work (after that I tried).

  Help, please.

  You should be able to go back to 8.1 for Windows by following the instructions here:

  https://www.YouTube.com/watch?v=2Y3uc2FWlK0&index=3&list=PL1RkaknDn7v-w5LEVIDvTCvmKZ_1_NcZz

• Keyboard problem after upgrade to 6.0

  Hello everyone

  I used 5.5 of Vmware Vsphere ESXI and Vcenter 5.5 without any problem of keyboard on the remote console on the guest operating system (win 7) after upgrade to esxi, vcenter 6.0 and 6.0, I have problems with the keyboard on the guest remote operating system, note I use french keyboard.

  french keyboard is also used by the operating system remotely.

  How can I solve this problem, so when I try the console remotely on the guest operating system display does'nt English keyboard us keyboard

  Thank you

  the problem is still persisting when using the web console, but when you use the remote console MRC the keyboard works normally

• Satellite L730 - Bluetooth problem after upgrade to Windows 10

  Hello. I use a portable Satellite L730 and the only thing that would prevent me from upgrading to Windows 10 is the problem of Bluetooth. RFHID, RFCOMM and RFBUS will not work properly because there are no drivers. Apart from that, the computer there is no requirement of meeting problem Windows 10.

  So is it possible that a sollution to this problem will be provided anytime soon?

  Hello

  In most cases, BT does not work due to lack of BT software.
  The point is that most laptops use a module for WLan and BT.
  This combo module WLan/BT requires additional driver filter...

  According to your WLan / module BT, you will need to install the filter for the BT driver package.
  In most cases the 8 Win / filter package 8.1 Bluetooth driver should work under Win 10...

  But you have to watch for the manufacturer of modules... There are different modules like Atheros, Intel or Realtek

• Several problems after upgrade from Windows 7 to Windows 8

  Updated for win7 to win 8.   The printer KODAK ESP 3.2 stopped working.   Then, there was a problem with my graphic card Radeon X 1650 SE started giving me problems.   Windows 8 said that the catalyst library program was not compatible with windows 8, and when I tried to update, the update stopped at halfway.

  I have not yet activated windows 8 because I could go back to win 7 and if I go even once, I don't want windows to refuse my serial No.   Anyone had similar problems?

  OT: Windows 8

  Hi victor,

  When you upgrade printer KODAK ESP 3.2 Windows 7 to Windows 8, you need to update the printer drivers. I suggest you to download and install the drivers from the following link:
  http://support.en.kodak.com/app/answers/detail/A_ID/36460/selected/true

  For problems with the graphics card Radeon X 1650 SE, I suggest you to download and install the drivers from the following link by selecting the appropriate drop down list model number. http://support.AMD.com/en-us/download

  Alternatively, you can try to install the Catalyst Media Center program in compatibility and see if that helps.

  Make the programs more compatible with this version of Windows
  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  I hope this helps. Let us know if you have other problems with Windows in the future.

• KEYBOARD PROBLEMS AFTER UPGRADING WINDOWS VISTA

  After update to automatic in windows vista, keyboard on my computer toshiba laptop no longer recognizes Maj characters and produced the capitals only with the caps lock on.  Any ideas on how to solve this problem would be appreciated.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Go to the website of the manufacturer of your laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  And read this info:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner