Keyboard satellite 2430 problem when press z,?, Fn or the arrow keys

When one of these keys are pressed (z,?, Fn or the arrow keys), the cursor control mode light will light up and the keyboard no longer works. In addition, the context menu of the application randomly appears and disappears, and when I'm using a text editor, writes \z repeatedly. The cursor moves the cursor moves out of control across the screen.

I tried to disconnect the internal keyboard and use an external, but I still have this problem. I also tried a complete reinstall with the recovery CD, but the problem persists. Any idea?

Post edited by: dacostamedeiros

Hello
If the problem persists after the installation of recovery is certainly the hardware problem. The strange is that problem with external keyboard too and I'm afraid that any replacement keyboard on the laptop will not solve this.

I recommend you contact the partner Service of your country, and they can check if the keyboard controller is defective. If you need address, you can find them under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

Good luck!

Tags: Toshiba

Similar Questions

  • LabVIEW 2009 SP1 crashes when moving large selection with the arrow key

    If I select a lot (10 or 15) diagram components and try to move some distance with the arrow button, I'm often a program crash.  Because a reduced number of components seems to hang after a longer distance traveled, it looks like some sort of buffer overflow error.  I don't see this problem when you use the mouse to move selections.

    I checked to make sure I have the latest version of the video driver for my NVIDIA Quatro FX570.  I also tried to work with no hardware acceleration and no handset, written.  What happens on Windows XP SP3 with all current updates.

    It became so bad that I have to do a save as every fifteen minutes to avoid losing data.

    Why not use my mouse for all movements?  Because it is not as specific and not so easy to limit to only one dimension of the movement.   My hand is not as stable as it once was.

    I'm hoping someone will have a suggestion that will clear up this problem.

    As I have indicated, I had the same problem with 8.5 and just DID a new install of Labview 2009.

    Since it is possible that my three monitors configuration, which of course requires more memory video, may be at the origin of the problem, I am satisfied with workaround by dragging the objects closer to their final destination and then using the arrow keys.

    Three monitors are ideal for the front, block and help/Internet/probe damaged.  When I got to work in the field with a single monitor, I felt severely handicapped.

    You can consider the issue closed.

    Thank you for trying to reproduce the failure.

  • Call a help file (.chm) when press a button on the front

    I can't call a help file (.chm) when press a button on the front. I have only called when press a key then right click the mouse and navigate the selected key for the button.

    Call the help file (.chm) when press a butto wrote:
    I have only called when press a key then right click the mouse and navigate the selected key for the button.

    This part is not so clear for me.

    But you have coded according to the part file .chm calling within the event to change the value of this button?

    If not try this using the Structure of the event & post here.

    If you post your code here, someone can help reg what has gone wrong.

  • I'm having a problem when I open My Documents, the window opens and looks great, I can go to any folder and open it and all is well again

    I'm having a problem when I open My Documents, the window opens and looks great, I can go to any folder and open it and everything is well again, however if I then opened my pictures, and then open a file... some files, less than a second after they are open [and the pictures show] will make the window My Documents to disappear also all the desktop icons disappear the computer will then will reset it self , add all the icons and waiting for me to do something.

    I have no idea where to start looking for this problem.
    I do not have a disk operating system is
    When I try to save an attachment, as in email, Explorer opens, I choose a location to save it, then immediately Expolrer closed! I can't save an attachment

    Hello Philipwk,

    Thank you for your message.  Please provide comments to a few questions so that we can better help you get your problem solved.
    1. are there recent changes made to your system, namely the hardware or the software?
    2 How long present this problem?
    Here are two methods to try, please try in order.  If a system restore fix the problem, do not perform step 2.
    Step 1:
    Run a system restore to before that was the problem.  Please click the link below to get instructions from system restore.
    Step 2:
    Create and test the new user profile.
    Click 'Start' > right click on 'My computer' > select 'manage '.
    Double-click 'Users and groups' > below, select "users".
    In the pane, right click on the space empty and select 'new user '.
    Enter the identification information you will retain and select OK
    Right-click the user account that you just created, and then select "Properties".
    Select the tab "member of" > click on "add".
    Type Administrators in the field and select "check name".
    Once administrators is added, click OK
    Disconnect and connect again your new account, opening pictures with your new trial account.  You can even browse your other photo folder by going to the following location:
    c:\Documents and Settings\ (user account) \My Documents\My images
    If it works, your profile has been altered somehow.  You can then start to copy your data from your old profile to it.
    Please let us know if it did or did not work for you.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows media player error "Windows Media Player has encountered a problem when you try to read the file" after burning CDs.

    Original title: "missing songs" in my windows media player then burn them on several cd :((

    I burned songs to several cd using my Windows media player to make different Cd, but after I returned to my library all the songs that I burned to the CD have disappeared, they are there, but they won't play it is as if they have been deleted, a window appears saying that windows media player has encountered a problem when you try to play the file. I did not notice this until after Cd burning a few I can't do more because if I keep going I'm not going to have more songs in my library! I don't know what to do im going crazy, it took me a long time to get all of these songs and now he disappeared! I have Windows 7 Ultimate is the version 12.0.7601.17514 hope that helps

    Hello
     
     
    They were playing before you burn CDs?
     
     
    Method 1:
    Open the troubleshooting Windows Media Player settings Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

    Method 2:
    This problem may be due to database corruption. You can delete the Windows Media Player database and check if the problem persists.

    Steps to clear the database of windows media player:

    a. exit Windows Media Player.
    b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
    c. Select all files in the folder and then click on Delete on the file menu.

    Note you don't have to remove the folders that are in this folder.

    d. restart Windows Media Player.

    Note: Windows Media Player automatically rebuilds the database.

    If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

    a. exit Windows Media Player.

    b. Click Start, click Run, type % LOCALAPPDATA%\Microsoft and then click OK.

    c. Select the Media Player folder, and then click on Delete on the file menu.

    d. restart Windows Media Player.

    Note Windows Media Player automatically rebuilds the database.

  • Start up problem when having multiple databases on the machine

    Start up problem when having multiple databases on the machine:

    I installed two databases.

    When I stop the database and try to start using

    Startup pfile ='... location... " ;

    I get ora-12514: TNS: listener is not currently know of service rquirest in connect descriptor

    When I try again after 3 seconds, I get a new error, ora-01041: internal error. Hostdef extension doesn't exist

    Stop and start gave no problems when I had a database. Why I get problems when I have two databases?

    I use: show the pfile parameter. SPFile; to make sure that I have the right parameter locations, the error should not be the location.

    I never installed two databases on a single machine, then perhaps that I make mistake of a first - timer.

    Anyone know how to get this working, i.e. start and stop DB without problems?

    The oracle 11 GR 2 on Windows 7 64 bit, everything works normally.

    Thank you
    Ayman

    Published by: aymanzone on June 15, 2011 09:27

    aymanzone wrote:
    My oracle_sid is set to the name of one of my databases

    echo % oracle_sid %

    shows me the name of my first database.

    Still does not.

    When I start the services of two databases by using Services, I can connect and run queries both the database.

    Published by: aymanzone on June 15, 2011 11:47

    First of all... the Oracle Service for the instance must be started for the DB that you try to connect or start.
    Next... from the command prompt:

    Set oracle_sid =

    sqlplus sys as sysdba

    Startup pfile = 'location of the pfile respective db.

    Now, if you want to start or connect to another DB, which is on the same server (again assuming that the Service is STARTED)...
    From the same command prompt or other session...

    Set oracle_sid =

    sqlplus sys as sysdba

    Startup pfile = 'location of the pfile respective db.

    Published by: Srikanth on June 16, 2011 12:27 AM

  • When I restart and press f8 to go into safe mode, I can't scroll to the top I use the arrow keys, but she will not go up

    It shows the possibility to go in safe mode, but I can not just ride to select

    Try using the arrow keys on the numeric keypad (key '2' and '8'), but for those to work, your "Num Lock" must be disabled.  (Press the NumLock key, until the light Verr off Num).

    If this does not work and you are able to boot into normal mode, you can configure so that it starts in safe mode using "msconfig":
    Start-> Run-> "msconfig".
    Start msconfig, click on:
    Win.ini (tab)-> and then place a check mark in front of "/ SAFEBOOT"-> click on 'OK '.
    Restart your computer.
    He will then start safe mode.

    HTH,
    JW

  • Problem with the arrow keys in some tools

    Then, as most of you know, you can use the arrows on your keyboard to change the radius of rounding of certain tools, add or remove segments of the spiral shape, etc. A tap should adjust your settings of the tool into thin slices. But in my case when I press the arrow key, it makes big changes. The same thing is 'C', 'X', 'F', 'V '. So I can't use these tools properly. Does anyone know how to deal with this problem? Thanks in advance!

    If you use a Wacom tablet, then you are a victim of the Wacom/Illustrator bug. As far as I know there is no solution yet. The only solution is to temporarily use a conventional mouse.

  • Print layout on screen rotation when you use the arrow keys

    I must have accidentally pressed a wrong key combination.  Now, when I use the arrow keys on the keyboard while typing of text, orientation changes screen, according to which key I hit it, I hit the down arrow, the text on the printed page rotates 180 degrees.

    How can I fix it?

    Biggar Gordon

    Houston, Texas

    Thanks for your reply.

    I googled the question of fun and learned you can hit CTRL + Alt + an arrow key to change the direction of the display on the monitor.  Pressing on the same new keys cancels the function.  I must have accidentally done to create the mess in the first place.

    I've done the same thing if I had rebooted the system.

    Thank you very much!

    Biggar Gordon

  • Cursor autour breaks and clicks in the Middle words or a page, when you type, selects areas of the document when writing and by typing the following key, all this goes away.

    I have Microsoft Windows Vista Home premium, Version 6.0 (Build 6002: Service Pack 2), was Norton Internet Security. Cursor autour breaks and clicks in the Middle words or a page, when you type, selects areas of the document when writing and by typing the following key, all this goes away. Perhaps because of my attempts to resolve this issue, some of my PC system has had problems, it became unstable, I've had several accidents that I got Norton 360, but it don't did me not the solution and stops working, I re installed Norton Internet Security. Please give some answers and advice on how to solve this problem, thank you.

    Hello

    You use a desktop or laptop computer?

    Is the mouse a mouse wired or wireless?

    What is the brand and model of the computer and the mouse?

    If you are using a laptop, I suggest to change the sensitivity of the mouse pad.

    If this is a wireless mouse it might be interference from another close to the mouse. Make sure that speech recognition is not enabled.

  • Artifacts when moving object with the help of the arrow keys.

    Hi all

    hope this is the right place to post this question.

    I want to write simple arkanoid game in Flash (AC3). I managed to write code that moves my paddle with the arrow keys. The code looks like this:

    function OnNewFrame(event:Event):void
    { 
        if (input.IsLeftHeld)
        {
            if (paddle.x > 0)
            {
                paddle.x -= 10;
            }
        }
        else
        if (input.IsRightHeld)
        {
            if (paddle.x < stage.stageWidth - paddle.width)
            {
                paddle.x += 10;
            }
        }
    }
    

    It works, but the result is ugly. The animation is not smooth, there are moments when the paddle stops for a moment. Also when the speed of translation is high (this is 10) you can see that paddle flashes at the ends, it resembles the unique problem of buffering. You can see both of these effects here: http://www.flash-game-design.com/flash-tutorials/movOb.html , identified flicker is less visible due to the amount of small translation.

    How to solve this problem? How can I enable double buffering (or maybe it is enabled by default)?  Any help will be appreciated.

    PS Sorry for the bad English

    Hello! I think you went backwards... First - in order to achieve the best visual transitions - you will not use travel speed at all. Second - you must pay attention to the establishment of the frame rate of the Flash document. Vivid games usually run at 60 frames per second. So I made a sample for you. Try it, it: http://cdn.dmldevelopment.com/plugins/tests/paddle/paddle.html . You can use arrow keys plus a key space to see how smooth the transition is. And you can download the source code here: https://rapidshare.com/files/3779443821/paddle.zip . Please let me know if I helped you. See you soon!

  • When I use the arrow keys in firefox to go forward and back, the cursor erases tiny pieces of letters.

    Even within this field of text that I type, everything is normal, but a back using the arrow keys (and then spacing also forward using the arrow keys as I go back to typing) deletes chunks of the text. Once I have started typing again in this area, the components are deleted to normal. This effect can be captured in a screenshot. After inspection, it seems to be a second invisible cursor, a character to the right of the cursor visible. So when the back arrow back, the invisible cursor trails that visible, destroying the text behind. When the spacing before using the arrow keys, the text gets fact sinking in front of the cursor visible.

    Try turning off hardware acceleration.

    • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

    If disable hardware acceleration works then check if there is an update available for your graphics display driver.

  • All my objects in Indesign are locked. I can move objects with the help of the arrow keys on my keyboard, but not with the mouse. I must have done an order by mistake. Any suggestions?

    All my objects in Indesign are locked. I can move objects with the help of the arrow keys on my keyboard, but not with the mouse. I must have done an order by mistake. Any suggestions?

    Thanks for your help. I work again InDesign brokedown and after a reboot, everything works perfectly fine.

  • Is it possible to set up a slideshow in Muse that will allow a user to use the arrow keys on the keyboard to advance the slides in a browser?

    Is it possible to set up a slideshow in Muse that will allow a user to use the arrow keys on the keyboard to advance the slides in a browser?

    Hello

    Take a look at a similar debate here

    Re: To navigate in the slide show with the arrow on the keyboard?

    keyboard control arrows to slideshow and lightbox Widget

  • direct selection - move the anchor points with the arrow keys of the keyboard

    Hello

    I use Illustrator CC.  I just use the image tracking tool to create a version vector of my company logo.  It worked pretty well, but now I'm just trying to clean it up a bit.  I have a few anchor points that I want to just push upwards or downwards into the smallest possible increment.

    I think it would be easier for me to do using the arrow keys on the keyboard instead of the mouse, but the arrows cause my selected anchor point to jump in too large a distance way.  I checked to make sure that the bearings commented, snap to grid and snap to Point are all extinct.  I don't see anything else to do.

    Can someone tell me which control how the keyboard arrow keys will move an anchor point, and how can I fix this to the smallest possible distance?

    Thanks in advance,
    Paul

    General Prefs, area keyboard Increments. Have something you need.

    Then use Nudge (up, down, left, right arrow).

Maybe you are looking for

  • Change browser.newtab.url does not work

    Hello Installed some crapware today and have trovi.com as the page by default when I open a new tab. It makes me incredibly angry. What is even worse, he has changed the browser.newtab.url and when I removed the config it STILL load the same page. I

  • Script installation Ubuntu 14.04 post error

    A dependency error is popping up when I install skypeforlinux. Here are the logs Implementation of skypeforlinux (1.1.0.21)...Oksources. List.d is not a folderdpkg: error processing package skypeforlinux (-configure):installed of subprocess post-inst

  • Recently, I built a new computer and used my old hard drive. Now, I can't activate Windows XP via internet or telephone?

    Hello I recently built a new computer with a new motherboard, processor and RAM.  The computer works well, but I can't go through the activation of Windows XP.  I tried connecting via internet, and he said that I didn't have a connection, which I kno

  • How can I reset Library Center of track records and files

    Original title: Media Center in Vista I had set up to monitor records, but subsequently changed his mind.  I put stop monitoring the folders that I didn't but the folders and files are always in the library.  How can I reset Library Center of track r

  • Delete "scan to" destinations on Cm2320nf

    I removed an old computer to a desk and uninstalled all HP her software. The name of the computer still appears on the LCD screen on the printer.  Indications on this list is not editable from the printer itself or by the interface accessed via the I