keyboard shortcuts do not change the mouse pointer, unless you move

Similar Questions

• Change the mouse pointer in the simulation?

  Hello

  is it possible to change the appearance of the pointer mouse in a software simulation (on a single slide)?

  I got to change the pointer in demo mode.

  Kind regards

  Jurek

  Sure.  Simply select the subject of the mouse on the slide where you want it to be different and then select another pointer in the Options tab.  If you want to use a pointer that is not listed, you can click the Browse button to navigate to a cursor file replacing. Please note that the format must be .cur, not just a graphic file.

  If you want to get really creative and change the mouse cursor for something completely different, maybe it replaced with a graphic file, it is also possible using a widget.

• Can not see the mouse pointer

  Whenever I go to a program like WoW or Media Center, my mouse becomes invisible. I can always click on things and move it, I can't see the pointer! I saw a question asking pretty much the same thing, but it did not help me at all the... I also noticed that I can not only see the pointer when I fullscreen, however I can't get full screen sometimes.

  Hi Roxas72,

  Turn off the mouse pointer trails and check if you are able to access the mouse pointer in Windows media center.

  (a) open mouse by clicking the Start button, click Control Panel, clicking hardware, and then clicking the mouse

  (b) on the Pointer Options tab, uncheck 'Display pointer trails.

  (c) click on OK to save the settings.

  See the links below for the Wow game and try the steps.

  http://forums.worldofwarcraft.com/thread.html?TopicId=24401852177&SID=1

  http://forums.worldofwarcraft.com/thread.html?TopicId=2967988341&SID=1

  More support on the game Wow post your query in the forums of game and check.

  http://forums.worldofwarcraft.com/

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Change the mouse pointer to the location of the bearing

  I'm working on Excel/simulations for training, and at some point I want to ask the students to resize a column by clicking twice between the column headings.  When they do this in Excel, the cursor turns into a 'sign with the arrows on the sides' to signify that they are on the exact point.  I can insert a rollover image to this place that shows the correct cursor type, but it is display the image at that location, while the mouse pointer remains hand.

  Is it possible in Captivate 9 to force the mouse pointer to change the specific locations of flipping?

  If the output is HTML5 you can do it with CpExtra as explained here:

  About the mouse | Infosemantics Pty Ltd

• Do not turn the mouse pointer in one hand. Why?

  Hello!

  Why, when I do a (adding an action to a symbol) button, the mouse pointer doesn't turn into a helping hand, when I put the key?

  And how to fix it?

  Thank you

  You can set the cursor of the mouse for a symbol or element by using the mouse cursor option in the properties panel.

  

  I think that the addition of that action will not turn a div for the tag button.

• Escape the mouse pointer when you press the space bar

  My tecra has developed a problem where whenever I press the space bar, the mouse pointer out of the screen and the mobile guard in the upper right or sometimes down left for about 30 seconds then stops. happens in all weather conditions of applications that I use an optical mouse or the touchpad

  Hi Dave

  I had the same problem. Initially, the mouse was mad for 30 seconds, but shortly after, it was worse. I switched the keyboard and now everything is ok.

  Of course, the pointer of the mouse was defective. I'm sure that in your case the problem is the same.

  Good luck!

• Can not change the mouse buttons

  I tried new mouse on my computer, and now my computer will not recognize the original mouse as a Microsoft mouse. The keyboard and the mouse still work, but I can't change the buttons of the mouse for left-handed people my family before I had no problem doing this. The original mouse is a Sony Vaio device that works wirelessly with a keyboard via a USB input device. Any ideas?

  See if that will help:
  The problems with the mouse button or scroll the parameters
  http://support.Microsoft.com/kb/303091

• Windows 7 64 bit - the mouse pointer doesn't move do not but the mouse is recognized and left/right click

  Problem:

  My mouse pointer is in the middle of the screen and will not go. If I have a left or right click, click on the system recognizes this, but does not respond to the mouse movement. My wacom tablet 's going to move the cursor.

  I've been running the system for 6 months. This problem occurred only 4 days ago. All other features are OK and unchanged.

  Solution attempts:

  I bought another USB mouse and it has the same problem.

  I also tried to reinstall the USB drivers as shown in the post of http://social.technet.microsoft.com/Forums/en/w7itprohardware/thread/20826bf8-996e-4622-96f5-09ab7a7d0b1f

  Hardware / software:

  • Generic PC with motherboard Gigabyte
  • Intel Core i7 with 12 GB
  • Windows 7 Professional 64 bit (active)
  • Razer mouse connected via a USB cable
  • Generic USB mouse is brand Legend

  Please let me know if you need more information

  Hi Ardeet,

  Two other things I would say.  First of all, have you been able to test your mouse on another machine to make sure it's working properly?

  Also, have you been to the website of the manufacturer of your computer to update the drivers for your machine and chipset?

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to change the mouse pointer to the loading slider

  Hi all.

  In my program, on a press of button I am loading some graphic files that take up to 4-5 seconds. During this time, I want to change the cursor of the mouse to load the cursor of the mouse as a circle of rotation as in windows. What should be the way to do this?

  Kind regards.

  (1) take a look at the help, if you're looking for the mouse cursor will show you the function SetMouseCursor

  (2) it would be also nice to you provide comments - so far all of your previous questions were answered by various participants of this forum - it's more fun to help if you see from time to time a small "thank you"...

• Change the mouse pointer

  my old tech updated comp in place my mouse to be wide and white with a blue ring behind her beak I am blind visuially and this seemed to be THE ONLY way I could SEE IT Ive moved and my current tech challenge it HOW DO I GET IT BACK

  Original title: mouse

  Open Control Panel and select "mouse" it select pointers. Here, select the menu drop-down and select "Windows Aero (extra large) (System scheme)"

  Click on the apply"" button. downstairs.

• Find the mouse pointer

  I know there is a way to tell Windows (7, anyway) you want a locator (concentric circle which shrinks) animation make more visible the location of the mouse pointer when you press a CTRL key combination, but I can't find documentation of this feature anywhere

  Go to the Control Panel, [view by - small icons, as applicable], mouse, tab pointer options, set the box see the map by clicking on the hold control key .

• When you do $APPL_TOP CDs do not change the directory

  Dear members,

  I installed oracle ebs model VM 12.2.3 with success, but what scene cd $APPL_TOP & $INST_TOP do not change the directory.

  You can help me please how to set the environment variable as I am new starter in this field.

  Thank you and best regards,

  El

  During the execution of the command make sure that there is a space between '.' and the file "APPSDEMO_ebs.env"

  Ex;

  >/u01/install/VISION/fs1/EBSapps/appl cd #-leave if this directory is same
  

  > . APPSDEMO_ebs.env

  
  

  However if you are faced with the question and then close and reopen the PuTTY and try with other files .env as of the above steps.

  After that if you face same question then better take help of DBA to properly configure files approx.

  Concerning

  Patrick Reddy.K
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  
  

  
  

• Why am I suddenly the following error message: "the specified location is reserved by the operating system and is not allowed. Please choose another location. "I've been recording all night and I have not changed the settings.

  Why am I suddenly the following error message: "the specified location is reserved by the operating system and is not allowed. Please choose another location. "I've been recording all night and I have not changed the settings.

  toml12632875 wrote:

  I've been recording all night and I have not changed the settings.

  You have completed a disc to its ability, by chance?

• Keyboard shortcuts do not work after changing the blending mode to a layer

  There is a strange bug that I experienced with photoshop. Whenever I change the blending mode to a layer (for example by selecting "Multiply" in the menu drop-down blending mode), my keyboard shortcuts stop working until I have click on the canvas again. It's annoying because often, I'll be on the Brush tool and I did draw on the canvas and press ctrl + z to re - activate keyboard shortcuts. I'm curious to know if this problem occurs to someone else and if anyone has found a solution for this.

  Version of Photoshop: 20150722r.168 x 64

  Operating system: Windows 10

  It happens on Windows, because the drop-down list with blend modes remains highlighted or active (around the blue line). You can press ENTER to confirm and delete the highest point around blend mode dropdown or use keyboard shortcuts to change the layer blending mode. To change the layer blend mode, you must have selected layer and then press Shift + Alt + letter for the blend mode. This shortcut does not work in the case where the tool you are using have mode option in the blending Options bar.

• White screen at the Vista start up... only the mouse pointer, loading the driver freezes on crcdisk.sys loading, sfc/scannow does not work...

  Hello
  I don't know if this is the right place for this post... Sorry if it's not! I had looked online if anyone has the same problem to me, I found similar problems, but not the mine one (but if there is, can you please give me the link?).
  I have a DELL LATITUDE D830's with a dual boot (Ubuntu and Vista). When I run Vista I get the Windows logo and then a black screen with only the mouse pointer.
  Keyboard does not work. I can move the mouse, but can not select anything. No work of Ctr + Alt + Delete.
  I can just turn off the computer. At first I need to press F8 to choose something otherwise I get the black screen.
  If I reboot requesting the automatic restoration of the PC that he asks me the account and work only account is mine a (no administrator available). He then suggested to contact the administrator. I checked the error report and nothing is reported: the system works.
  I have no previous configuration to restore.
  I can access the command prompt. So I tried to write sfc/scannow. The answer is that to complete the process requires to restart the computer and make again sfc/scannow. I restart again, the new order, but I get the same answer...
  When I get the black screen, CPU is not disabled, because after a long time (about 2 hours) the computer restarts itself... If something happens even if I don't know what!

  The only thing I have not tried is to restore Vista from CD... I'm really afraid that this could remove the partition, or crash at startup I have, by removing access to Linux!

  I have a backup of all my files, so no matter if what I have to do to cancel my files, but what I really need is to keep Linux operating.

  So, if you have any suggestions... I'm not good at using the computer, so, please, a solution step by step be really appreciate it!
  Thank you very much

  Paola

  PS No peripherics are connected, the wireless is disabled

  Hi seymar,.

  I suggest that you run a tool to restart system on the computer and check if it works.

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, Press any key to start Windows from the installation disc.
  Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change the BIOS settingsfor your computer. For more information, see BIOS: frequently asked questions. 4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click Startup Repair.
   
  Check out the link for more information below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  If the previous step fails then I suggest that you run CHKDSK on the computer to check if there are any errors on the hard drive.
  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, Press any key to start Windows from the installation disc.
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change the BIOS settingsfor your computer. For more information, see BIOS: frequently asked questions.
  4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click on the command prompt and type chkdsk command-line /f and wait until the scan is complete and later to restart the computer and check what is happening.

  For more information please visit the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.