Keyboard stuck on all iOS 9.2 screens

Similar Questions

• Cursor stuck in the center of the screen

  All of a sudden the cursor on my son's pc is stuck in the middle of the screen.  It's a mouse optical usb.  I checked that the mouse (3 different ones) works on other computers in the House.  I tried to move the mouse to different ports, but the cursor remains blocked.  I rebooted the computer several times, both with the wired mouse and without the mouse, in him after reconnecting.  When I go to Device Manager (navagating around using the keyboard... fun, not!) there is no category for mice and other pointing devices, do not know if this is relevant or not.  This computer runs on Windows XP.  I would be grateful for any suggestion, at this point, I feel I have ruled out problems with ports and mouse/mice, do not know where to look.

  So, you have a USB keyboard or a PS/2 keyboard?

  What is the brand and model of your mouse?

  You may also download USBDevView from http://www.nirsoft.net/utils/usb_devices_view.html and see if it can detect the presence of your mouse in the registry.

  Hi PML... I appreciate your help.

  It is a usb mouse.  I have access to 3 all seem to run on other computers.  So I'm trying to use the computer problem is an optical mouse, Kensington, model K64381.  OK, so I downloaded the driverboost... and I'm ready to scan, but even if I am using the tab key, I can't land on the button 'Search now' huge... it never stops down on the link 'leave driverboost'... any suggestions.

  I meant the keyboard , not the mouse.  If you have a PS/2 keyboard, then you can safely uninstall all the USB root and hubs controllers (working from the bottom up) in Device Manager.  When you restart, Windows should detect the hardware and reinstall everything.  It may - or may not - the problem of your system, not recognizing the mouse when it is connected.

  The problem if you have a USB keyboard is that you then will be temporarily withoutANY interface to the computer... and IIRC, you must meet certain dialogs during the phases of detection.  If you can't answer (because you do not have a mouse or a keyboard), nothing is reinstalled.

  Even if you do not have a PS/2 keyboard, before uninstalling the hubs and USB controllers, you can search the devices 'ghosts' that can possibly cause a conflict that prevents your system by recognizing the mouse.  The directions are here:http://support.microsoft.com/kb/315539 replace step 1 with the following, which does not use the mouse:

  Windows key + R > cmd > Enter

  I'm not sure what you mean regarding the "Driverboost."  I wanted to say to you allows you to download a utility named 'usbdeview.  Direct download (for a zip file) link ishttp://www.nirsoft.net/utils/usbdeview.zip if you are able to unzip the file, you must then just run usbdeview.exe and he should do the scan automatically.  There is no button "scan now".

  USBDeview.exe should do the research work in the registry automatically.  If you want to consult the registry yourself, start by running regedit and navigate to

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum

  Should a subkey under Enum named HID, and a named another USB.  If you develop any of these two subkeys (based on your device manager, you can miss the subkey HID completely), you should see a number of entries that begin with the characters Vid.  Here is the 'provider identification' for different devices connected to your computer.

  The VID of Kensington is D 047, then look for an entry or entries that look like this: "Vid_047D & Pid_xxxx" (the xxxx is the "product identification code"; I believe that the value of PID for your mouse 1067, but I could be wrong).

  If you click on the subkey under the Vid for Kensington, you 'should' see details of your mouse.  It should look like this (although it is a Logitech mouse):http://cid-18b259158254905b.office.live.com/self.aspx/.Public/mouse%20reg%20key.jpg

• I want to hang the Tower up to my big screen and instead of using a keyboard, I bind a tablet that I can use as a keyboard and to manipulate objects on the screen in real time

  I am in the middle of do a remodeling and think about a furture upgrade my PC at home, I want to hang the Tower up to my big screen and instead of using a keyboard, I want to connect a tablet that I can use as a keyboard and to manipulate objects on the screen in real time. Is there a way to do this?

  (1) before the PC upgrade, please read the complete technical documents for all devices

  you want to go to upgrade

  (2) it is the first thing to do to make complete lists of materials you want to change.

  Compare specifications detaily, note important diference between many of the same features

  (3) for more information on some devices and materials, see link below

  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us

• I don't know what happened but my keyboard is coming as split and Mid-screen instead of come inside.

  MY keyboard is now shared and until Mid-screen instead of set and future on the background.

  Press on and hold the small keyboard icon at the bottom right, swipe your finger up to select "merge and Dock.

• How can I return the virtual keyboard (now in the center of the screen) down?  I don't see what I'm typing so I hope it works.  Help, please

  After a recent update the keyboard appears in the center of the screen, rather than at the end. How can I return it down?

  Press and hold the keypad icon bit, then slide your finger up to 'Dock '.

• Everything on my screen has tripled in size how it back to the normal size, ps I tried the right hand winder on cone and it just reduces the font size not all things on the screen itself

  Everything on my screen has tripled in size how it back to the normal size, ps I tried the right hand winder on cone and it just reduces the font size not all things on the screen itself

  Your lowered obtained resolution. This can occur if you are running an older game that uses 800 x 600 for example.

  Control Panel > display > settings - change the resolution to correct for your monitor. MS - MVP - Elephant Boy computers - don't panic!

• Computer not keeps freezing, no response from the keyboard or mouse, all pages and windows stop loading

  Original title: Vista pc keeps freezing.

  Hello

  My pc keeps freezing, as in no response of the keyboard or mouse, all pages and windows stop loading etc.
  I have to hold the power button to re boot.
  After restarting, it might work correctly for hours or only 2 minutes!
  Seems to be ok in safe mode.
  Any ideas?

  Hi jamesbil,

  Thank you for keeping us posted.

  Method-

  I wish that you uninstall Service Pack 2, and then repeat the repair facility.

  See the article-

  How to uninstall Windows Vista service packs as a troubleshooting step

  http://support.Microsoft.com/kb/948537

  Note: A system restore will undo the changes on the computer. Earlier all applied settings will be lost.

  We know if you need help.

  Thank you.

• Won't start at all. just a black screen. Only the satrts upward on safe mode

  Won't start at all. just a black screen. Only the satrts upward on safe mode

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem of Timer and TimerTask for counter display all seconds on the screen.

  Dear friends,

  I have little problem in the use of the timer. I took the timer to display the counter on each period fix repeatedly. but I did not here. Please help me. The code is as shown below.

  import java.util.Timer.

  java.util.TimerTask to import;

  Import net.rim.device.api.ui.Field;

  Import net.rim.device.api.ui.UiApplication;

  Import net.rim.device.api.ui.component.RichTextField;

  Import net.rim.device.api.ui.container.MainScreen;

  SerializableAttribute public class TimerTest extends UiApplication

  {

  Timer;

  public static int COUNT = 0;

  Public Shared Sub main (String [] args) {}

  TimerTest tt = new TimerTest();

  tt.enterEventDispatcher ();

  }

  public TimerTest()

  {

  a new screen

  pushScreen (new TimerMainScreen());

  }

  SerializableAttribute public class TimerMainScreen extends screen

  {

  TimerMainScreen()

  {

  Add (new RichTextField ("Count =" + Integer.toString (COUNT), Field.NON_FOCUSABLE));

  try {}

  Timer = new Timer();

  timer.scheduleAtFixedRate (new TimerMainEvent (), 200, 1000);

  }

  catch (System.Exception e)

  {

  do nothing

  }

  }

  private class TimerMainEvent extends TimerTask

  {

  public void run()

  {

  Try

  {

  COUNT ++;

  If (COUNTY<>

  Add (new RichTextField ("Count =" + Integer.toString (COUNT), Field.NON_FOCUSABLE));

  on the other

  Timer.Cancel ();

  Timer.Cancel ();

  }

  catch (System.Exception e)

  {

  Do nothing

  }

  }

  }

  }

  }

  Please let me know where I'm wrong, I want to display all seconds on the screen. If I set the interval 0 then it run TimerMainScreen first time but after all no update, I see on the screen.

  I thank in advance

  Vimal

  Use the following Code in your race.

   UiApplication.getUiApplication().invokeLater(new Runnable()
   {
    public void run()
    {
     add(new RichTextField("Count = " + Integer.toString(COUNT)   ,Field.NON_FOCUSABLE));
    }
   });
  

• How can I move the icon of the keyboard on the right side of my screen?

  I'm moving the keyboard icon that displays the Board on-screen. I next to the Start button, but it cannot move next to 'time' to the right. Can you advise?

  Thank you
  JEM
  PS maybe the right side has too many icons already? Is there a limit to the number?
   
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/show-desktop-icon-on-taskbar/800e118e-8b36-4A49-97ed-4df7a1fbd31b#footer >

  Hello

  1. are you referring to the keyboard on the screen?
  2. do you want the icon for the keyboard on the screen to display in the system tray?
  Cannot move the keyboard on the screen icon in the system tray.
  To better understand the issue, you can use Sky Drive to send the screen shot by consulting the following link so that we can guide you better.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

• on the screen keyboard cannot start, all facilities accessitems Fail

  Hello everyone' Articles

  After you apply the updates today 10/12/2014. my screen keyboard on fails to start only with all 'ease of access '.

  The error message is 'path' osk.exe

  A reference returned by the server

  I tried a system restore which I brought back before the updates and it worked fine

  Reinstall the updates and the problem is back

  running Win 7 64 sp1

  Thoughts?

  I tried sfc/scannow

  Hello, Tim!

  You are welcome!

  And Bruce Hagen is right in saying that the update pulled!

  I don't know if Microsoft will replace it.

  Bye!

• Stuck on Windows Resume Loader quick screen with USB keyboard, so I can't answer

  Windows Vista has not recovered to sleep, so I turned off computer and rebooted.  Now, I get the message Windows resume Loader

  "The last attempt to resume the system from its previous location failed. Attempt to retake?  Continue with the system summary or remove data restoration and menu system start-up. "

  I have a USB keyboard so I can't use the arrow keys, or enter key, so it's just sitting there. My computer has no PS/2 keyboard entry. I tried to hit the F8 key on startup (as well as the F12), but I can't get another screen. How to answer the question with a USB keyboard?

  Found the solution. Keyboard has been plugged into the USB port on the monitor.  Cable keyboard switched to the USB port on the computer, and then click keyboard worked, so I could answer the question. I chose "Delete restoration data and proceed to system boot menu."  Everything works fine now.

• BlackBerry smartphone keyboard stuck on the main screen

  My keyboard is still open when I'm on the main screen. When I press the BB button it does not open a menu to hide the key board, instead it just goes to the screen next where are other applications and download buttons etc.

  I tried and it worked, thank you.

• IPhone crashed the Middle updated and now stuck on the setting of the screen!

  My Iphone has been unusually slow. So I tried to update my phone I thought it's maybe the old version of the IOS that makes my phone lag (I think I downloaded the latest version, 10. something). While trying to update my phone, it crashed at halfway. Now I'm stuck on the screen that appears when your phone has been updated (white background, that invites you to enter the password and put in place). However, after putting in my access code and attempts to connect to the wifi, my phone indicates that the wifi password is incorrect, this is not. Also, when I try to connect through mobile data it shows that "your phone could not be activated because the activation server is not reachable. Try to connect your iphone to iTunes to activate it, or try via the mobile connection in a few minutes... ». As a result, I tried connecting to ITunes and I got a different view of error message saying "ITunes only could not connect to this iphone." An unknown error occurred (0xE8000015).

  Help, please!

  Try If you can to update or restore your iPad, iPhone or iPod touch - Apple Support.

  TT2

• Alternative text / keyboard shortcuts go after iOS 10

  Everyone knows about the loss of their replacement text shortcuts after updating to iOS 10? I feel like it's the opposite problem, we had here: https://discussions.apple.com/thread/6656922?start=465 &

  Everything else is transferred in my settings (for example, my keyboards are installed, my emoji frequently used are the same, my bluetooth connections are all there, etc.) except this.

  I went from literally a thousand + text to replace default "omw" replacement (on my way!).

  I tried to turn on and off road iCloud (although tech said the keyboard shortcuts are stored in the local backup not the cloud) and restart the phone, which is something that I found online. It does not work.

  Same thing here. Did not have that much (maybe 20 or more), but now all that remains is the shortcut of Omw.