Keyboard touch U430 stops working randomly in Windows 10

Since I've upgraded to Windows 10, keyboard stops working randomly in different programs. For example, it might stop working in Firefox, but at the same time it would work very well in Chrome and Notepad. Or it stops working in Chrome, but works very well to edge and Firefox. Most of the time, closing and opening the progrm do nothing, only a reboot solves the problem for a while. I should also mention that, while the keyboard stops working in this particular program, the program itself is not frozen and it works fine if I use the touchpad.

Not sure if MS or Lenovo is to blame, but Lenovo should look into it.

Found the culprit. 16.0.0.614 Kaspersky virtual keyboard. For the disabled that and no more problems.

Tags: Lenovo Notebooks

Similar Questions

  • Taskbar and Windows Explorer stop working randomly in Windows Vista

    original title: windows Explorer

    Well where I start, I haven't had any other problems with windows vista, I have this running on my laptop, so sick of my task bar crashing whenever I get Windows explore has stopped working does anyone know why this happening coz it's so frustrating thanks Helen x

    Hello

    Use the start-up in minimal mode and other methods in this troubleshooting to see if you can determine
    the cause of the problem.

    -----------------------------------------------------

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    ----------------------------------------------------

    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ===========================================

    Refer to these discussions because many more excellent advice however don't forget to check your antivirus
    programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
    first.

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/GP/slow_windows_performance/en-us

    Performance and Maintenance Tips
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

    Explorer Windows stopped working
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

    Hope these helps.

  • Sound stops working randomly in Windows 8

    I have the HP Envy X 2 using Windows 8 and every day I use the laptop to watch things or just listen to the music, the noise will stop working at some point. I have try the resolution of problems and no problem finding. I unplug the keypad where it is a connection issue. None of this works. The only way to solve the problem is to restart. Sometimes, it doesn't work the first time and I have to restart a second time. It's getting really frustrating now and I don't know if that's a problem with my laptop and I'll have to send again or if it's a matter of Windows 8.

    I'm grateful for any help
    Thank you

    Hi Jennifer,.

    -Have you tried to reinstall the Audio drivers to check if it works? If this isn't the case, I suggest you to install the latest drivers and check.

    Visit the HP website and download the Audio drivers based on your model number of the laptop.

    http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&TaskID=135&prodSeriesId=5296226&prodTypeId=321957

    Once you have downloaded and saved to the desktop drivers, follow these steps.

    1. press the button on Windows and the X button, then select Device Manager.

    2. Browse sound, video and game controllers.

    3. right click on the Audio driver and click on uninstall.

    4. you will be asked to completely remove audio drivers. Press OK and continue.

    5 restart the computer, and then install audio drivers that you downloaded from the HP website.

    Hope that reinstalling the driver may resolve this problem. If you have any questions, please let us know.

  • Aspire R7 572G touch screen stopped working after a windows update 10, pls help

    I made an update of windows 10, but to my dismay, I lost my duties for the touchscreen. I checked the properties of MY COMPUTER and he now says pen and press enter not taken in charge. Pls help

    Hmmm... I upgraded my R7 572 G but my touch screen is ok. I don't know what you were doing. However, my problem was that the screen is not rotates in Windows 10. So I went to this folder to run as administrator to solve the problem of automatic rotation and it works. C:\OEM\Preload\FIXAUTOROTATE\EnableRotate.cmd

  • Internet Explorer stops working randomly on Windows Vista

    original title: internet explore on vista

    dosent Internet Explorer seem to recognize when im online and told me im not stuck?  or when work doesn't work alltogether usually when im in the middle of something

    Hello

    Here is some useful information if all goes well for you

    try to read the information contained in this microsoft link troubleshooting internet explore

    There is also a ' fix-it ' it all a lot of methods to follow

    You receive an error message in Internet Explorer: "Internet Explorer cannot display the webpage".

    http://support.Microsoft.com/kb/956196

    There is an automatic "Fix - It" at the top of the link I gave you

  • Keyboard and touch pad stopped working on Satellite L750

    My laptop L750 keyboard and touch pad stopped working on start up. I now use a USB mouse and on-screen keyboard to do anything either. I have tried several things to fix, but nothing seems to work.

    I've updated keyboard drivers, tried related work key, updated and run antivirus software and restored to a point in time before the show. Still no luck.

    Any ideas?
    Thank you

    Keyboard drivers?
    Can you please send the link to download? It is unclear to me that the own keyboard driver.

    In any case, can you use keyboard and touchpad if you start the operating system in safe mode?
    Are you using the original pre-installed OS that you got with your laptop?

  • Satellite Pro A210 - keyboard and touchpad stop working after hibernation

    I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

    Anyone have any ideas?

    Hello

    You have installed all the drivers for your laptop? I mean especially the chipset driver.
    Check this box!

    If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

    Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

    Sorry, but that's all I can say at the moment

  • Who knows what the solution to the message "Microsoft keyboard driver has stopped working?

    Who knows what the solution to the message "Microsoft keyboard driver has stopped working?

    Hi Raymond,

    Thanks for the quick response.

    The question you posted would be better suited in the Logitech Forums. I would recommend posting your query in the keyboard Logitech Support.

    Keyboard Logitech support

    http://www.Logitech.com/en-us/support/keyboards

    If you need further assistance on all issues related to Windows, just tell me and we will be happy to help you.

  • My function paste decides to stop working randomly. What could be the problem and how could solve this problem?

    My function paste decides to stop working randomly. What could be the problem and how could solve this problem?

    A repair from the Vista DVD installation.  Don't forget to have a backup/restore point just in case.

    http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

  • My touch screen stopped working.

    Original title: I have a Gateweay all-in-one touch screen running windows 7 Home premium amd ie9. My touch screen stopped working. How to restore this function?

    I tried the system restore, I ran my anti virus several times, I 'googled' the problem. A rental offer advice for $38! I don't have thirty-eight dollars. Can anyone help?

    Hello

    1. did you of recent changes to the system before the show?

    2. What is the number of the model of the computer? 

    Also, I suggest you to visit the links below and check if it helps.

    http://gateway-us.custhelp.com/app/answers/detail/A_ID/11564/kW/touch%20screen/session/L3RpbWUvMTMyMzE0MzQyNy9zaWQvc2tQMWlUS2s%3D

    http://gateway-us.custhelp.com/app/answers/detail/A_ID/6763/kW/touch%20screen/session/L3RpbWUvMTMyMzE0MzQyNy9zaWQvc2tQMWlUS2s%3D

    http://gateway-us.custhelp.com/app/answers/detail/A_ID/6762/kW/touch%20screen/session/L3RpbWUvMTMyMzE0MzQyNy9zaWQvc2tQMWlUS2s%3D

    I hope that helps!

  • Satellite C70D-B-307 - brightness keys stopped working after migration Windows 10

    The brightness keys have stopped working after migration Windows 8.1 to Windows 10 (Satellite C70D-B-307).

    How did solve you this?

  • keyboard has suddenly stopped working

    Hi all, my keyboard has suddenly stopped working. I was installing an upgrade of El Capitan (later) and when the computer is restarted, it gave me this message that the bluetooth keyboard was not detectable. Well, I don't have an external keyboard, just the Interior came with the laptop. I have reset the pram and it still does not work. I looked at the system preferences and beach seems to be in check. Is it time to this service or do I still have options?

    Thank you

    Nadia

    Try resetting the SMC http://support.apple.com/kb/ht3964

  • EXPLORER WINDOWS HAS STOPPED WORKING. EXPLORER WINDOWS RESTARTS. RIGHT CLICK

    Have Windows Vista.  When right click on photos, files photo or zip files error message appears: WINDOWS EXPLORER has STOPPED WORKING.  EXPLORER WINDOWS RESTARTS.  This error message also appears when you use the Remove button to delete the photos.  I did a registry cleaner, disk/driver cleaner, catering to a specific date.  I get to the point of confusion when searching for answers.  All opinions on the ShellExView or should I do a clean boot?  Help!

    Hello

    Run the sfc/scannow command.

    http://support.Microsoft.com/kb/929833

    Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

    1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
    2. Type the following command and press ENTER:
      sfc/scannow

      The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

    How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

    http://support.Microsoft.com/kb/928228#appliesTo

    If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

    read the below tutorial on how to perform a repair installation

    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  • bought a brand of DVD cards 2010, but keep getting the message that Hallmark Card Studio 2010 has stopped working a problem casued the program to stop working correctly. Windows will be

    I bought the Hallmark Card Studio 2010, I am operating Vista 64 bit the message I get is that Hallmark Card Studio 2010 has stopped working.  A problem casued the program to stop working correctly.  Windows will close and informs you if a solution is available.  I also downloaded the Windows 7 Upgrade Advisor and I get the same message with it.  It will not work.  All of the suggestions.  Thank you.  Carol M.

    Hello

    • Have you tried the suggestions of Imran M in other post?

    You can view these methods:

    Method 1:

    Temporarily disable UAC and check if the problem persists.

    1. open Control Panel.
    2. under the user account and family settings click on the "add user account / remove."
    3. click on one of the user accounts, for example, you can use the guest account.
    4. in the user account, click on the link "go to the main page of the user account.
    5. under "Make changes to your user account", click on the link "change security settings".
    6. in him "turn User Account Control (UAC) to make your computer more secure" click to deselect the "use User Account Control (UAC) to help protect your computer. Click the Ok button.
    7. you will be asked to restart your computer. Do when you're ready.

    Warning: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

    Method 2:
    I recommend the clean boot and try to run the program.

    Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

    See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  • Cannot install problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.

    Original title: program problem caused to stop working correctly. Windows will close the program and notify you if a solution is available.

    On a number of attempts to install programs on my laptop with Vista home premium OS, I get the message, "caused a problem program to stop working correctly.  Windows will close the program and notify you if a solution is available. "The program closes, but I am never notified a solution, and my attempts to solve the problem have not had any positive results.  Among the programs that I tried to install are not important to me, but I really want to install Blackberry Desktop Software.  Everything seems to go well with the installation until suddenly I get this message.

    Hello

    1. what programs are they?
    2. What are they compatible with windows vista?

    Step 1: Check if the problem persists in the clean boot state.

    From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
    Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

    Note: To restore your computer to a Normal startup mode, follow these steps:

    1. click on start in the box start the search.
    2. type msconfig and press ENTER.

    If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

    3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
    4. When prompted, click on restart.

    Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

    Measures to check the application event log:

    a. Click Start.
    (b) in the search box type eventvwr.msc, and then on enter.
    c. now, click Application in the event viewer (local).
    d. now, looking for event log on the right side of the event viewer window.
    http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

Maybe you are looking for

  • Transfer photos via Bluetooth

    Can someone tell me if it is possible to transfer a photo from the Gallery on my smartphone directly to my laptop?I tried to make using the obvious ways, but every time that I received the message that the file was not sent. Any help would be appreci

  • Favor to ask: you can open this labview 2009 Vi and save it for me in a readable Labview 8.6 vi?

    Hi guys,. I have a favor to ask: can someone would be kind enough to open this Labview 2009 VI and save it in a VI readable Labview 8.6? You are likely a cause of missing blocks I use special but I don't want to have to redo all the VI. Thank you ver

  • Updates to C++

    I have several updates to C++ and I was wondering if I could uninstall old updates without losing any additional protection? To be more clear, I ask if the latest updates cover everything that updates more older don't have / do?

  • My WIN Vista Premium PC problems.

    Your help is very appreciated. I have a computer Windows Vista Home Premium (32 bit), with problems. I tried many ways, find proposals / solutions here on your web pages, but trying the they seem to not work for my pc. For example, Windows Update doe

  • Continuous beep

    My laptop makes a continuous beep when starting and stops with the use continues to the windows key. Please give me a solution or the area of suspect