Keyboard, type the letters wrong when you play

When I start a game on my computer without running as an administrator, he begins to act really weird. All the letters stop working. That would happen, that if I press q, he's input 1. If I have another letter of the alphabet input, it will correspond to another number, but the weird part is if I try to write a message in the game, the type of letters about what they are supposed to type.  I don't know why this is happening, everything was working fine until I recently updated my laptop. It'll be great if someone could help me with this problem.

Hi all

Check the following suggestions:

(1) confirm that your keyboard is set to the English language.
Go to the control panel. Click the icon "Region and language".
If the setting appears to be in a foreign language, change it to English/U.S.
Click on keyboard and language, make sure the keyboard language is set to English.
Click on the keyboard to change and in the general tab, make sure you have the appropriate language.

(2) check if your NumLock key is enabled. If so, the key to disengage.

(3) run a litmus test of characters using the Diagnostics of keyboard Microsoft (MSKEY) program. While in the MSKEY program, press multiple keys in order to ensure that they are the same keys identified in the MSKEY window.
To run the MSKEY diagnostic test, go to the Start button. In the start search box, type mskey, and press ENTER.
Then start typing the keys that are not type correctly and see what is returned during the test.

Please let us know if you were able to identify all the problems.

Sincerely,.

Marilyn

Tags: Windows

Similar Questions

  • Keyboard, type the letters instead of numbers

    After getting a virus on my computer and run MalwareBytes, my keyboard shows numbers when I typed letters. I have a Windows XP desktop PC and NUMLOCK is not on, so something is wrong. This does not occur when you use my admin account, apparently since I wasn't using it when I got the virus.  When they provide answers, please keep in mind that I can't run any programs in the account assigned because of problems caused by the virus file association. Runs the file XP on Doug Knox website for fixing exes did nothing within the affected account.

    The virus has not caused the problem. I found on another site that this is as a result of protection Comcast ConstantGuard.  I uninstalled it, and my keyboard is now back to normal. Most sites say it is caused by a num lock, but it wasn't the case with me.

  • The music stops when you play the game

    When the music plays to my Apple tv on iPad, I somethimes want to play game. I turned off the music of the game, but he interrupts every time that my music from Apple. How can I avoid this?

    no doubt you can, music would stop probably when you start a movie or started too the other music on the appletv

    It would be strange to accumulate audio sources and there is no way to detect if you had muted or or taste

  • Vanishing pages as the entire page would disappear for a website and the same thing when you play card games

    I have HP 15 8.1 - has been works well for 1 month, then disappear when I would be looking for a web site and a mobile on the screens, the entire page and the same cursor when playing card games. I would go to the top left corner where a thumb nail pic. would be and click here to retrieve it. Once is not so bad, but when it is repeated whenever I touch to move the cursor to start to return to the game; something very bad is allowed. I asked the other on the jury of the issue and the N O answer works! Help

    Hi, Will,

    Thanks for posting your query in Microsoft Community.

    I understand that you have problems with the display in Windows. We will surely help you in the matter of fixing.

    I would like to know some information to help you in the matter of fixing.

    (1) you get an error message while the display disappears?

    (2) remember to make changes before this problem?

    (3) is specific whereas, using Internet Explorer or by using a program or application?

    (4) when you say "when playing card games", playing this game in Internet Explorer?

    In the meantime, please follow the following suggestions to solve the problem.

    For problems in Internet Explorer, try to run the troubleshooter for Internet Explorer and see if that helps.

    Resolution of the problems in Internet Explorer

    http://support.Microsoft.com/mats/ie_performance_and_safety/?WA=wsignin1.0

    If the issue is not specific to Internet Explorer and then try to make clean boot and check to see if the same problem happens. By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

    How to troubleshoot the clean boot in Windows

    http://support.Microsoft.com/kb/929135

    Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

    I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

  • Get the blue screen when you play a game (COD modern warfare 2), ID: 1044. At all the most recent drivers.

    This is part of the error code, if you need more just ask. (It's in Norwegian, but I guess you'd understand it anyway)

    Problemsignatur:
    Pa problemhendelse Navn: BlueScreen
    OS-versjon: 6.1.7600.2.0.0.256.1
    ID for nasjonal innstilling: 1044

    Tilleggsinformasjon om problemet:
    BCCode: 124
    BCP1: 0000000000000000
    BCP2: FFFFFA80082494B8
    BCP3: 0000000000000000
    BCP4: 0000000000000000
    OS version: 6_1_7600
    Service Pack: 0_0
    Product: 256_1

    I have all the latest drivers, and no update is available in Windows Update. When I check the event viewer, it is said:

    System
    - Provider of
    [ Nom ] Microsoft-Windows-Kernel-Power
    [ Guid ] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
    Event ID 41
    Version 2
    Level 1
    Task 63
    OpCode 0
    Keywords 0 x 8000000000000002
    - TimeCreated
    [ SystemTime ] 2009-11-16 T 12: 53:50.350843600Z
    EventRecordID 4618
    Correlation
    - Execution of
    [ ProcessID ] 4
    [ ThreadID ] 8

    Computer:
    Motherboard:    ASUS P5E WS Professional
    Chart:           Sapphire Radeon HD 3870 X 2 1024 MB
    CPU:                 Intel Core 2 Quad Q9450
    RAM:                 OCZ PC2 - 6400 Platinum Vista PErformance Edition 8 GB (4 x 2 GB)
    Power:             Power PC & Cooling Silencer 750W

    Nothing is overclocked, and my cooling system is running on max, never had a problem with the heat.

    So what is the power of the nucleus, and why he will enter the blue screen only when I am games? And most importantly, how do I do?

    Thanks for the replies!

    sweppes

    sweppes,
    It was just a possibility that heat is a problem.  Also in your games if you operate in high res\max video settings you can turn them down to smaller settings and test.

    You also mentioned that the motherboard has not yet all drivers for Windows 7.  Maybe it's that you will have this kind of problem until you get correct chipset drivers.

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • using the arrow keys when you play.

    When play Treasure Island on Facebook my up and arrow keys to keep my page up and down scrolling.  My space bar will also make a break not my game.  What would casue it?  How should I do?

    Thank you
    Xrayjks

    xrayjks,
    You must make sure that the game window is the active window and not the whole page.  Sometimes after that the game window is loaded another element on the page will load and switch the focus of the game window to the web page.  Just click in the game window and then test your arrow keys. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Freeze the images and the game closes when you play call of Duty Modern Warefare 2


    Could someone please help me to get into the thick of this please! AM running windows 7 pro 32 BIT my system is a

    Core of duel AMD 4600 +.
    AM2 MB m2npv-vm chipset geforce 6150
    DDR2 2 gig ram xtreem dark 800
    GE-force 9800GTX + 1024 meg
    If there is any other information I need to recover it please ask away!

    • You have problems with programs
    • Signature of the problem error messages:
      Problem event name: BlueScreen
      OS Version:6.1.7600.2.0.0.256.48
      Locale ID:1033
      More information about the problem:
      BCCode: a
      BCP1:04080024
      BCP2:00000002
      BCP3:00000000
      BCP4:82A7CBE8
      OS Version: 6_1_7600
      Service Pack: 0_0
      Product: 256_1
    •   
      Problem event name: BlueScreen

      OS version: 6.1.7600.2.0.0.256.48
      Locale ID: 1033
      More information about the problem:
      BCCode: a
      BCP1: FFFFFFFC
      BCP2: 00000002
      BCP3: 00000000
      BCP4: 82A7699F this blue screen was just facebook games the first time ever outside a great game!
      OS version: 6_1_7600
      Service Pack: 0_0
      Product: 256_1

      More information about the problem: this system was right up until I started playing call of duty: modern warfare 2 where I had a blue screen after the blue screen, but doesn't seem to affect other games, in the last week IV ' e updated my GPU drivers and getting frozen images, BSOD in GTA 4 as well.
    • What you have already tried to solve the problem I have updated my graphics records a few days ago from nvidia.com

    The minidump files showed various stop without named third-party driver error as causing the crash.

    One of the errors was an error VIDEO_SCHEDULER_INTERNAL_ERROR (119) which can be hardware related, but could be driver connected.

    One thing c:\windows\system32\drivers\sptd.sys driver has been known to cause various errors blue screen in some configurations, so I recommend you to uninstall the application that has installed this driver, possibly it is Daemon Tools.

    Then, uninstall the c:\windows\system32\drivers\sptd.sys - see "How can I remove driver SPTD on 32-bit operating system?" in the following link:

    "www.duplexsecure.com/en/faq

    Also, remember to update ATK0110 driver for the motherboard, you may need to find the latest driver for Windows 7 under Windows Vista.

    Also, consider updating the BIOS version 1401.

  • installed a keyboard and wireless mouse and the mouse works fine, but the keyboard types the wrong keys! Any ideas? Thank you

    installed a keyboard and wireless mouse and the mouse works fine, but the keyboard types the wrong keys! Any ideas? Thank you

    Wired or wireless - is usually not serious unless the wireless can get more interference.  If the keyboard is close to the receiver which is connected to the computer and you get the strikes hurt - my suggestion is to try first the keyboard on another computer.

    To do this, * not * require you to install specific drivers.  Simply unplug the combo of a computer and in the other and see if the keyboard works correctly.  Then, you can troubleshoot from there.

  • Sometimes when I type the letters do not appear immediately

    Lately when I type the letters don't appear on the screen.  I spent the last hours of the couple trying to clean up my computer, but I don't really know what could be the cause. This happens in all programs.

    Hi Netsrik,

    The problem occurs in any particular application?

    Method 1
    I suggest opening the keyboard on the screen and check if the problem persists.

    Type without using the keyboard (on-screen keyboard)
    http://Windows.Microsoft.com/en-us/Windows7/type-without-using-the-keyboard-on-screen-keyboard

    Method 2
    Keybord updated drivers from the manufacturers Web site.

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    I also suggest you to check for the keyboard repeat rate.

  • I liquidated my bar. As the search bar when you type in the web address, and now I can get it back. I handed to the clicked place where I did to trun off (unchecked it), and I don't see anything again?

    I liquidated my bar. As the search bar when you type in the web address, and now I can get it back. I handed to the clicked place where I did to trun off (unchecked it), and I don't see anything again?

    Hold down the key (key in OSX) and press the following letters in this exact order: V T M
    The bar of menus must now appear permanently, unless you turn it off again (view > toolbars). Turn on/off the menu bar is a new feature in version 3.6.

    See the other bars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).

    Then, in the Menu bar, go to view-> toolbars-> customize, then press the Restore Default Set .

  • Pavilion DM1 with Win8: illustrates the key commands when I type the letters.

    The problem is: when I type, for example, a K command "Devices" if poster or if I press the "Windows Help and Support" delete key appear the only way to stop him is to press the keys c and Windows, but it comes back in after typing about 6 keys. This makes the use of the keyboard almost imposible. In addition, I can't type a capital C when you use the button to the left.

    I tried to type high touchpad on left twice who stops him, a small light but I let go of the mouse.  I also did the thing about keys to sticky to ensure that was'nt on.

    The problem does not appear when I use a keyboard connected via usb.

    Any suggestions would be most welcome.

    It's time to replace the keyboard. If you have the warranty please ask HP.

  • Google has detected suspicious activity from your computer. Please make sure that you are not a robot. Type the letters you see in the text box

    Original title: I get repeated messages from Google that says, "Google has detected.
    I get repeated messages from Google that says, "Google has detected suspicious activity from your computer. Please make sure that you are not a robot. Type the letters you see in the text box. "or words to that effect. I can't search because when I enter a keyword and click on enter, I redirected to this message. How can I solve this problem?

    This problem was reported as being caused by the ISP redirect traffic sent to google.com. This causes Google to see a lot of traffic from the same IP address, which she sees as suspicious. See this:

    http://www.Google.com/support/forum/p/Web+search/thread?TID=1c8ae8e6799f5408&hl=en

    If you are sure that you have no malicious software, that would be merit to be studied.

  • Get the error code 116 blue screen when you play the game portal 2

    Original title: Pc restarts when you play

    When you play games like portal 2, after about 10 minutes, my PC stops all of a sudden down, retarts. I get this error when restarting.

    Signature of the problem:
    Problem event name: BlueScreen
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 2057
    More information about the problem:
    BCCode: 116
    BCP1: 85360510
    BCP2: 8F7FBA5E
    BCP3: C000009A
    BCP4: 00000004
    OS version: 6_0_6002
    Service Pack: 2_0
    Product: 768_1
    Files helping to describe the problem:
    C:\Windows\Minidump\Mini052212-01.dmp
    C:\Users\Nathan\AppData\Local\Temp\WER-608185-0.SysData.XML
    C:\Users\Nathan\AppData\Local\Temp\WER4DB2.tmp.version.txt
    Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    Any help? Thanks, Nathan
    Hello

    It's my generic how updates of appropriate driver: (update your video/display driver).

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your
    System. For each driver in the list, additional useful information is displayed: load address
    of the driver, description, version, product name, company that created the driver, and
    more.
    http://www.NirSoft.NET/utils/DriverView.html

    To check system drivers manufacturer as replacements and camera manufacturer who are most
    current. Control Panel - device - Display Adapter Manager - note the brand and
    fill out the template tab of the driver for your card video - double-click - write down the
    the version information. Now click on UPdate Driver (this can do nothing as MS is far behind
    certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver
    stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd
    evening with their own software and drivers and all other main drivers you have.

    Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), and then
    Site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions.
    (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT
    After each installation.

    Always check in the Device Manager - drivers tab to be sure the version you install
    actually arises. This is because some restore drivers before the most recent is installed
    (particularly that audio drivers) so install a driver - reboot - check is to be sure
    installed and repeat if necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable driver facilities in
    Windows updates, that leaves about Windows updates but it won't install drivers
    who will be generally older and cause problems. If updates offers a new driver can
    HIDE (right click on it) and then go get new ones manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

     
  • When you play Chess Titans, how can I change the level of difficulty?

    When you play Chess Titans, how can I change the level of difficulty?  I keep coming back to the level where I first started.

    You can adjust the level of difficulty, animation and sound settings and more.

    1. Open the Games folder by clicking the Start button. In the search box, type games and then in the list of results, click Games Explorer.

    2. Double-click Chess Titans.

      (Do not see? Check where are my games?)

    3. Click the game menu, and then click Options.

    4. Make your choices, and then click OK.

    http://Windows.Microsoft.com/en-us/Windows7/Chess-Titans-how-to-play

  • How can I disable the mouse pad when you use a mouse plug-and-play?

    How can I disable the mouse pad when you use a mouse plug-and-play? I tried to disable the driver, and nothing works.

    Hello

    Check with support of the manufacturer system, documentation online or forums that there is probably
    Shortcut keys that enable and disable the touchpad functions.

    Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
    and some come with a utility that loads in the Notification area next to the clock in the bottom right.

    ==========================================

    If necessary: (make sure that you have restarted at least once, if the above did not work)

    Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
    Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
    on the TouchPad and UNINSTALL.

    Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

    This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

    The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
    http://support.Microsoft.com/kb/310575

    Then go to the system manufacturer's website and get the latest touchpad drivers.

    Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

Maybe you are looking for

  • How to alphabetize the address book?

    I have my address book in alphabetical order. When I close it, then open it again, it is no longer in alphabetical order. There must be a simple way to solve this problem - I'm not too much into computers.

  • Windows Vista home Premium update error

    I continually get an error Code 80080005 when you try to update windows. How can I go about fixing of this please?

  • SGE2010 - traffic relay and DHCP configuration

    Hei We bought just a switch SGE2010 we want to use to replace the switches in the control panel of our office. So far I managed to access the switch and assigned a static ip.adress on our net, but I can't get to our entry point switch relay traffic.

  • adoption prepare failed

    HelloI have problems with the adoption of utility.  I installed EBS Vision 12.2.4 on Linux.  Now, I want to run a correction and according to the documentation program, I need to run adoption phase = prepare.  However, this operation fails (output be

  • vROps breaks SNMP &gt; outgoing

    HelloIs it possible to configure vROps SNMP alerts to go to different destinations depending on the vCenter or registered in vROps or make Cluster alerts all have to go to one destination?For example, I want a vCenter UK to draw attention to a UK SNM