Keyboard USB not detected

Similar Questions

• Before left SS USB not detected & gt; Model: 20-a220l & gt; Series of PC all-in-one HP Pavillion 20

  Dear concerned

  My PC: Model: 20-a220l > HP Pavillion all-in - one PC series 20,.

  Operating system: WIndows 7

  AV - SS USB not detected by any modem or USB key left right back side - USB 2.0 work.

  Rgds/Khalili

  Hello:

  You can have a TI USB controller.  See if this driver USB3 works...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-104401-1&cc=us&DLC=en&LC=en&OS=4063&product=5192630&sw_lang=

  If this driver does not work either, please complete the following steps so I can know what model USB3 controller motherboard in your PC is using.

  Go to Device Manager, find the other devices category, then click on the USB controller needing drivers.

  Then click on the Details tab in the upper part of the window USB controller.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  Drop down on it and select the second item in the list (Hardware ID).

  After the first string of characters you see in the window.

• keyboard USB not recognized.

  Yosemite on iMac 27 in.

  Following a system freeze (screensaver is the alleged perpetrator), the usb keyboard is not recognized.  The mouse works in all ports and when it is plugged into the keyboard. IPhone recharges also through the keyboard. Recovered last time after several reboots and keyboard buffering in after start-up.  This time, no luck. Next steps?

  Hello

  I had EXACTLY the same problem.

  New iMac and USB keyboard. He works first and the iMac would stop then find the keyboard.

  I tried to reboot several times, but that did not always help. My Bluetooth mouse doesn't work. I get to the login screen and I can't type my password (because my keyboard is not be found). I get a message on my screen that the bluetooth keyboard is "impossible", when I don't have a bluetooth keyboard and my USB keyboard is plugged. I tried all USB ports, no luck! I just found a strange way around the issue. I used a keyboard extension cable to plug into the same USB keyboard and it works now. No logical sense... I hope that this might work for you too. Good luck!...

• keyboard USB not recognized by when you try to install from WinXP cd

  Try to make an own insntall of Win XP on a computer with malware.

  Everything is normal until the installation program screen 'welcome. '

  You will need to press Enter to continue but usb keyboard apparently not recognized.

  Have you tried several keyboards usb with the same results.

  P.S. the usb keyboard works well at startup F3 goes to the system setup and F12 brings

  Start menu.

  Thank you

  .

  Check your BIOS settings, it may be an option to enable or disable the USB keyboard and set it to "Enabled".

  J W Stuart: http://www.pagestart.com

• Intermittent problem "USB not detected" Genius Traveler Laser 315 mouse.

  Original title: the USB mouse not detected

  -------------------------------------------------------------------------------------------------------------------------------------------------

  My problem is this: I have a Genius Traveler Laser 315 mouse which I brought last summer and it worked perfectly on my laptop. Recently I bought a new laptop, on which the mouse no longer works.
  The problem is very awqward, because the behavior of the mouse on the new laptop is completely random: repeatedly he actually worked perfectly when it is plugged-, but most of the time (e.g. After restart of the operating system or unplug the mouse and in him plugging back) it didn't. This behavior is even more strange, because on my old laptop and several others, the mouse still works perfectly.
  My opinion is that the problem is with USB drivers or a mouse, but when I tryied another mouse and disk external DRIVE on the new computer laptop, they both worked very well. I even copied oriented drivers on my old laptop to the new usb, hoping that I could solve the problem in this way, but the result was the same (on two laptops, the OS is Windows 7).
  Another possibility is that one of the sons of the mouse cable was broken, but I passed that, too, because I've tried twisting the rope as much as I could while he worked on the new laptop and it has always worked well.
  The USB on the new laptop computer Sockets all work (I tried all).

  I know that the simple solution is to buy another mouse, but rather what's wrong with it (or my new laptop) to spend the money to replace a mouse I know it's functional, because I feel that this money would be lost, I have no guarantee that the new mouse work (if I wanted to buy a new (, I'd still go for a genius) and, for that matter, I would be really happy if I could solve this annoying problem.

  If you have an idea where is or where could be the problem, or how could determine to hit or where I could get more help, I would be grateful for any comments.

  More details that might be useful:

  -on all laptops I tried the mouse of the operating system is Windows 7 Ultimate (and my old BONES and my new laptop was installed on the same CD)
  -the old laptop (on which the mouse works) is an Acer Aspire 5630
  -the new laptop is a Dell Inspiron N5010

  -------------------------------------------------------------------------------------------------------------------------------------------------

  OK, sorry, this is the mail that I sent to the support of the engineering team. But it provides a good background.

  I tried all the 'classic' fastening means (I'm not really sure, but I think that I also reinstalled windows AFTER seeing the problem)

  Any ideas? Thank you!

  EDIT: I mean REALLY not detected, not even as an unrecognized device by the "undetected".

  I have tried them all. The only strange thing that happened was when I opened the mouse: strangely, he started working beautiful (I disconnected and reconnected it several times and it has continued to work). Of course, the miracle did not last, but at least now I'm sure that there is a problem with the sons of the mouse - I think that one of them might be slightly broken somewhere inside the mouse, or immediately after the release of the cord there. Now, the question is why is my new laptop the only one who refuses to detect the mouse.

  The new most plausible problem is far beyond the scope of this forum, I'm going to look elsewhere, but I thank you again for your time and patience!

• Key USB not detected by the computer.

  Original title: Cnmemorysoftware

  If I put in my Spaceloop by CnMemory; I don't find them in my PC computer.
  So I can't work between the hard drive and the stick.

  Hey Manfred,

  Thanks for the reply and my apologies for the previous post helped you.

  1. did you try in another computer and see if the problem still occurs?

  2 have you tried another USB port?

  3. other USB devices connect properly?

  Please follow the methods to solve the problems of connectivity USB in the computer:

  Method 1:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2: Uninstall the USB drivers:

  1. Click the S tart button
  2. Select Control panel
  3. Open Device Manager
  4. Expand USB controllers
  5. Right-click on each USB drivers and select uninstall
  6. Restart the computer

  Reference article

  Install a USB device

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Please post back with the result. If the problem is still not resolved, we will be happy to help you further.

• Satellite L500-247 - mouse USB not detected

  Hello

  I have a Satellite L500-247, Windows 7. Long ago, I tried to use a USB mouse and it worked (plug-and-play) without problem. Yesterday, I tried to do the same thing and I tried 3 USB mouse, but no one works with me. I don't even get the window that says new hardware found. I plug in the USB mouse and nothing happens. I tried to put them into the other USB port, but also the same problem.

  I can plug in the USB and the laptop can detect it smoothly but with the USB mouse, the story is different. I don't know why :(

  I think that there is a problem in the USB voltage or sth like that!

  Can someone help me!

  Hi laith12,

  Probably there s something wrong with USB drivers or something, but I doubt s it s a hardware problem USB ports because USB key will be detected

  Did you install additional software or the USB mouse driver? In some cases they could make problems with USB devices so I n t install the mouse software and a USB keyboard.

  What you can do is to remove the USB ports on the Device Manager and restart your computer. Try also updating the driver from the official website of Toshiba chipset.

• Connectivity USB not detected at all on 1132 MFP

  Hello, I'm trying to understand this... the 1132 MFP turns on and works as a copier but it is not at all detected

  via a USB connection. Plug and unplug the USB cable do not produce any reaction from the PC either.

  I have replaced several USB cables, change of the USB ports on my computer nothing happens.

  Everyone is in a similar situation?

  I think the USB module is turned on the printer, but any feedback is much appreciated!

  Thank you

  Hi bleduri,

  I can't wait to hear that you have questions.  What is the exact model of the (M1132 MFP Laserjet, Deskjet) printer?  Given that the PC does not respond when you insert the USB it is possible that the PC port or printer is defective, but it is also possible the problem is with conflicts of USB or software related issues.  Please follow the steps in the following link to isolate if hardware is defective, other or software device conflicts are listed as being the issue. Click here

  I hope this helps!

• USB not detected at all

  Hello world

  New to the use of VMWARE, but I'm doing a project. Since I use a 64-bit operating system and I need a 32-bit I use virtual machine to run windows XP.

  I have read many topics and continuously see people saying ' go to vm > settings ", and I'm completely confused to where it is. I have looked through my computer for him and do not understand what people point also.

  My camera is the MSP430 and it is detected on my windows 7 64 bit, but it fails to connect to my xp. Previously, he has worked perfectly well, but suddenly, he refuses to work. On my tab devices, one who is stuck, I have that sounds and cd disk to network. Previously, he showed my key USB and my MSP430.

  If anyone can give me direct instructions to solve this problem, it would be great.

  Thanks in advance!

  Edit the vmx file and set the values to 'true '.

  and while you're busy - also fix your browser - it does not display file extensions properly

• NEITHER 6221 USB not detected at startup XP

  Hello

  Got a USB6221 running hotel.

  The problem is I have to be the device power cycle or to remove and replace the USB wire to get the detected device when I start windows XP.

  Research in the Device Manager, the action mentioned above the hang of "Data Acquisition hardware" and there is no other problems... until I turned off the pc and commissioning the next morning!

  Incidentally, the 'Acquisition of equipment of data' are automatically detected on a PXI system with a built-in controller.

  Has anyone else had this problem?  Anyone offer a solution?

  Thanks in advance.

  Dave

  What DAQmx version do you have? We have solved a similar problem by DAQmx 9.0.2.

  Thank you

  Andrew S

• External hard drives and USB not detected after installing windows 7

  Original title: does not display the hard drives laptops, but do sticks

  for some reason any lately
  any laptop computer portable hard disk or 3.5-inch usb drives work, but do memory sticks
  some show in computer management, some don't
  I've updated the mb drivers
  trying to not format to fix this little problem
  ideas?

  Hello

  1 have had any changes made on the computer before the show?

  2. What is the brand and model of the computer?

  3 have you tried plugging the laptop hard drive on different USB ports?

  I would suggest trying the following steps and check.

  Method 1:

  Run the utility of Windows troubleshooting for hardware and check.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Check if it helps.

  Method 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow these steps to reset the computer to start as usual. See step 7 in the article.

  Method 3:

  Throw a virus with the Microsoft Safety scan scanner to make sure that the computer is virus-free.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Safety Scanner WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Let us know the results.

• Need still restarts desktop Acer Aspire - keyboard not detected at the login screen

  Hello

  I have Acer Aspire ATC-605-UR13.

  In the course of the last 4 weeks, suddenly the keyboard is not detected at the login screen. The mouse works.

  Still, I have to restart to make the keyboard work.

  Any idea of what caused it? Perhaps any software installed that do?

  P.S.: Btw, I tried a new keyboard, the same behavior. I have concluded that this is not the keyboard.

  Thank you!

  This problem has been reported after that install some recently released update of windows... Currently the ability to perform a restore of the system to an earlier date. You can also try to uninsatlling updates of windows manually from Control Panel > windows update.

• Since the L7680 installation my usb ports are not detected...

  It seems that something in the registry has been changed.  My Western Digital Passport (mass storage device) is not detected is not my SanDisk Micro (2G).  Western Digital will work in the USB from the printer, but don't the SanDisk.  I've lost the use of all of my USB ports on my computer processor and montor.  They used to work before installation.  I uninstalled and reinstalled, I check startup items in MSCONFIG.

  I read on the Microsoft support page which the hkey_local_machine\system\currentControlSet\Control...

  should be set to activate, but I do not have this folder in XP.

  Western Digital does not know what is happening, or not SanDisk.  HP really gave me the run around way to uninstall and reinstall, but I didn't get an answer that solves the problem.

  It seems to me that since it was drivers from HP which caused my other unit to pass unnoticed, HP should be able to tell me how to solve this problem.  I do too much research for a new product.  I know I'm very frustrated, and since this is a new printer I still have time to take it for something that's going to work.  I had a Dell that has worked well, I wanted to just an upgrade.  I guess I could have updated by Dell.

  Just about the evacuation, someone has an idea what the fix is for my USB not detected ports that have been replaced by the reader on this printer?

  I added a new HP printer to my set all my ports no longer works. None of my flash drives or removable hard disks worked. I tried everything and then read "ports must be updated". My computer is older than three years and the ports of origin are 1.1 and are of most new USB 2.0 devices. Long story short, I went to microcenter and bought new ports ($11.00) and add them to my computer. All ports are now functional.

• my USB is not detected in my pc, but it is detected other pc and laptop. and if I restart my computer at that moment there, it is detected.

  I have lenovo ideapad laptop z580. i5, family basic Windows 7. in the week, I have a problem as "my USB is not detected in my pc, but it is detected other pc and laptop. and if I restart my computer at that moment there, it is detected. "so please give me the solution. Thank you. my email is * address email is removed from the privacy *. Thank you.

  Hello Badodariya Malay,

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description, it seems that you are having problems with pen drive not getting not detected.

  I need to ask you some questions to help you better.

  1. don't you get error message when the USB not detected?

  2. What is the brand and model of the USB?

  Perform the steps in the link and check.

  Tips for solving problems of USB devices 

  Answer to us if you are having problems with the USB key or any other problem of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• PS/2 keyboard does not work with Win 7.

  The PS/2 keyboard does not detect in Device Manager. The same keyboard works very well with Win XP. I tried to install the drivers but it still does not detect even the drivers installed correctly.

  Hello

  Check that the USB port on your mouse is connected to the green USB-to-PS/2 adapter and that the latter is plugged into the mouse PS/2 port on the computer. The mouse PS/2 port on the computer can also be green. If not sure which PS/2 port is the mouse PS/2 port, see the documentation provided with your computer.

  ·         Check that the USB port on the keyboard is connected to the purple USB-to-PS/2 adapter and that the latter is plugged into the keyboard PS/2 port on the computer. The keyboard PS/2 port on the computer can also be purple. If not sure which PS/2 port is the keyboard PS/2 port, see the documentation provided with your computer.

  WARNING: If you need to change a PS/2 connection, shut down the computer, make the changes, and then restart the computer. Do not plug a PS/2 port PS/2 device when the computer is running.

  Steve.