Keyboard-zero does not properly.

Similar Questions

• Wired Keyboard 500 does not properly

  My new wired keyboard 500 ignores strikes unless I type very slowly.  My old keyboard does the same thing.  Very frustrating.  Is this a Vista problem?

  Hi jdheim,

  This only happens with certain applications? Notepad, Word

  This problem may be caused by a hardware conflict or software, I suggest you try the following steps:

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the mouse and keyboard and then start.

  Now check if the problem is resolved

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: If outdated security software, can cause this problem

  Disable security software, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once the test is

  Step 3: Change the keyboard and test settings, see the link below for the steps:

  Change keyboard settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-keyboard-settings

  For more information, see the link below

  Troubleshoot wired keyboards that do not or only the erroneous characters category

  http://support.Microsoft.com/kb/258826

  Let us know if it works

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• touch screen keyboard symbols does not properly

  I bought recently an Asus transformer convertible portable book, which features a touchscreen removable "tablet" next to the keyboard. Most of the time I just use the screen without the keyboard as I have the touchscreen keyboard. I have windows 8 is installed.

  The problem is that no matter when try to use the keyboard section and press a key, it acts as a regular keyboard that requires shift for me to press a button to get some symbols. Such as SHIFT, press 1 to get! and 2 to get @ etc.

  This is a problem because there no way for me to 'shift' then that in this section, which means I have no way to use the majority of the symbols, unless I was to give the keyboard, which I won't do. It's the same with the? on the main screen to give me a / instead.

  Someone else has this problem as well? Becomes more and more frustrating.

  I searched for answers, the closest, I had was that it could be the UK keyboard, which is not, as I discovered, I have the English (Canada), I selected when setting up my computer.

  The keyboard I used was the touch keyboard, similar to that on the picture of this Article:

  http://Windows.Microsoft.com/en-us/Windows-8/using-touch-keyboard

  I tried also a lot of different things that I could think of to try to make it work, such as the SHIFT key, and then selecting the specific symbol, neither of which worked, moving to the symbols section and pressing one and also hold out the number or symbol that coincides with it.

  Honestly I don't know what happened, but it seemed to have fixed itself after my computer up to date a little after I posted this. which is always strange, because it was updated several times before and the problem remains.

  IM praying that the problem does not return, but I'm not keeping my hopes.

• United States International keyboard option does not properly

  Hello, I have a laptop Toshiba Satellite with Windows Vista Home Premium Service Pack 2.  I had been using the option of United States International keyboard, but it has stopped working.  The keys as the "quote mark and the tilde ~ print twice instead of the combination with the next character."  I tried to reinstall the keyboard option, but I still have the same problem.  I don't know when it started so I can't link to a particular Windows Update but I not made any changes to my hardware or installed new programs.  I use the Avira Anti Vir personal.

  Hi mdmcpapr,

  Please try to remove the windows update and see if this solves the problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  and

  Hi Cedric Guyot,

  Regarding your problem from XP:

  Please see the link below for Windows XP forums:

  http://social.answers.Microsoft.com/forums/en-us/xphardware/threads

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Safari Web Clip does not properly

  Hello everyone

  I have a problem with safari Web Clip and that is does not properly for almost all pages, as example, I participate in a contest of therapy dbrand/unbox, and I really don't want to open the web page, whenever a new winner is announced, so I created a web clip, but it does not work well When I click the web clip icon he asked the location of the clip and when click on done, the web clip is from a different region and I can't fix.

  

  

  Is this some sort of bug or can I fix it myself?

  Web Clip still didn't work if the cut element remains in the exact same on exactly the same site. This is apparently not the case here.

  Dashboard widgets in general, are an old technology that has not been updated in many years.

• Keyboard MacBook does not synchronize with external keyboard

  I have an external USB (Logitech K520) keyboard and is not sync with the MacBook keyboard.

  What I mean with "sync": for example, when I press shift on the MacBook, and 'a' on the external keyboard he wrote 'a' instead of 'A '.

  Another example: I press cmd on the MacBook and the 'c' on the external keyboard, it does not copy the selection

  It worked on my old ThinkPad. I can work on a Mac as well?

  The solution is here: rd-to-accept-modifier-key-input-from-macbooks-i http://apple.stackexchange.com/questions/131287/how-to-get-external-apple-keyboa

• Toshiba 47L7453DG - CEC does not properly using exernal amplifier

  I bought Toshiba 47L 7453 a few days ago.

  It is connected to the amplifier Onkyo TX-NR535 but CEC does not properly. Volume control works fine but On / Off or stanby does not at all.

  My previous TV Toshiba 42XV635DG was communicated by the CEC with the Onkyo even without any problem.

  The wire connection is HDMI 1.4 certified.
  Maybe the problem is with the firmware of the TV.

  Maybe someone had the same problem.

  Any suggestion?

  Thank you

  Hello

  From my point of few TV and amplifier are connected some CEC (Volume control) functions that work. I think you should check the auto power settings and HDMI CEC standby control system.

  Manual, you will find some important notes:
  http://www.Toshiba-OM.NET/LCD/PDF/English/L7453-424755-English.PDF

  _Page: 11_
  + You can control the basic functions of audio/video devices connected with s TV remote if you connect an HDMI-CEC compatible AV amplifier or playback device. +
  + If several devices are connected, the HDMI CEC control function may not work correctly. +

  _Page: 86 - 87_
  + When the point to activate the HDMI CEC control in the menu of HDMI CEC control configuration is defined on.
  + On, also allocated to individual features will be activated. +
  + When the connected equipment work, HDMI CEC control automatically detects the TV input selection. If the TV is in standby mode, it will be automatically reactivated. +
  + If the TV is off (standby), television will send a message turns off (standby) all devices HDMI CEC control connected to the TV. +

• EQUIUM A60: graphic ATI does not properly

  I HAVE AN EQUIUM A60 1 YEAR MESSAGE SUDDENLY CRASH SAID: ATI GRAPHICS CARD DOES NOT PROPERLY.
  CAN'T FIND THE DRIVERS UPDATED ON ATI OR MICROSOFT HELP PLEASE?

  Hello

  Can you tell me when this message appears?
  First of all, you can try to update the graphics driver from Toshiba. It is a first step that you can try.
  Check this page for the driver download.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Good bye

• Error message: Shockwave, Flash Player does not properly during playback Slotomania

  Original title: shockwave flash player

  Hi I have problems with some games. Especially slotomania. When I enter the RM of slotomania that flashing message saying that Flash shockwave Player does not properly can give to interrupt or stop options taken but its gone too fast for me to do something. Then the really slow game. Can you help me?

  Hello Marilyn,.

  Thanks for posting your query in the Microsoft Community Forum.

  According the information, you are facing problems to play games online as Slotomania due to the Adobe Shockwave, Flash Player error messages.

  It would be useful that you can answer these questions to help you further.

  1. are you facing problems that when you play online game Slotomania?

  2. using Internet Explorer or another web browser?

  3. what version of the Windows operating system is installed on your computer?

  4. have you made a recent software or hardware changes to the system?

  If you use Internet Explorer, you can see the article and check if it helps to solve the problem.

  The problems of games online using Internet Explorer

  It will be useful.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• fan does not properly

  Does not properly on the laptop

  Sometimes it is just dust, animal hair etc. blocking the fan. Take a can of compressed air and blow all the ports/vents/opening very carefully to see if any change.

• HP keyboard model kg-0851, I tried all the steps from hp, but the keyboard still does not

  I tried all the steps from hp, but the keyboard still does not.  When I look at the Device Manager, it says that it is fine.

  Hello

  1. what operating system is installed on the computer?
  2 have. what troubleshooting measures you tried?
  3. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link:

  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

• Setup.exe does not properly

  I'm trying to upgrade to Windows 7, and at one point in the configuration of several programs are listed to be uninstalled, when it gets to the Realtek USB 2.0 card reader a pop window that says setup.exe does not properly.  Cannot uninstall in Control Panel either. Also tried disabling antivirus and firewall as a suggested site. Is there a way around this kind of Setup Windows 7 allows you to work around this problem

  Repeat: You need upgrades to Windows 7 not Windows updates.
  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  Please post on the forum for Windows 7 update/install. TaurArian [MVP] 2005-2010 - Update Services

• Graphic drive does not properly.

  Graphics driver does not properly.  Screen will Dim and must restart to resume use.  Occurring more frequently now.  Y at - it a fix for this problem?

  Problem does not occur in safe mode.  Failure seems to occur on any key or the video style.

  Any material support is the manufacturer of the hardware regardless of the operating system that you choose to use.  As it is unlikely that you have a Microsoft video/graphics card - one you have and have you downloaded and installed the latest drivers/software they provide for your particular device?

• COQ2014: COQ2014 AMD/ATI does not properly

  2 messages warn me for "AMD/ATI does not properly" and "search solution AMD Display adapt-ATI Radeon Graphics Cards.  Search for updates, solutions with nothing appear.  I don't know what that precisely uninstall nor where the new material.

  Thank you!

  Dear customer,

  Welcome to the HP consumer's Support Forum!

  Please try and uninstall the graphics driver AMD/ATI to address current from the control panel > programs and features.

  After you have uninstalled the current graphics driver, please try and install the following driver and check:

  Suite software Catalyst:

  http://support.AMD.com/en-us/download/desktop?OS=Windows+7+-+32

  Hope this helps, for other queries in response to the post and feel free to join us again.

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you
  GR1
  Although I am an employee of HP, I speak for myself and not for HP

• When I turn on my computer a warning appears indicating "delivery manager does not properly.

  DEP original title: data

  When I turn on my computer, a warning appears that says "delivery manager does not properly" and when I click on help and support balloon explanation is that my DEP is not configured correctly.

  Then, after following the instructions and correct the parameters I restart my pc and still the same message appears.

  Hi Olliewoods,

  (1) since when are you facing this problem?

  (2) what is you receive the exact error message?

  An application installed on the computer may be the cause of this problem; I suggest you try the following steps:

  Method 1: Put the computer to boot to determine which application is causing the problem.

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  See the link below for more information on Data Execution Prevention
  Data Execution Prevention: Frequently asked questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.