Keynote remote with recorded Keynote

Similar Questions

• Can I use Siri new Apple remote with my Apple TV 3rd generation?

  Can I use Siri new Apple remote with my Apple TV 3rd generation?

  No. not compatible.

• With the help of Apple Remote with MacPro (desktop)

  (1) pair an Apple Remote with my MacPro (desktop) to control iTunes from across the room?

  (2) if so, how?

  Thank you!

  I don't think that any recent Mac Pro has the required infrared receiver for this to 'see' the Apple Remote.

• I can't call anyone on Skype, he said only: "problem with recording device" help?

  Could someone help me? my lack of Skype let me call anyone, when I try to call or answer a call it comes a message saying "problem with recording device"-does anyone know how to fix this help please!

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=no&cc=no&DLC=no&sw_lang=&product=7264...

  You can install this "driver - Lyd" (Realtek High-definition-lyddriver (HD))

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-135685-1&CC=no&DLC=no&LC=No... =

• Enable or disable the write lock filter remote with a script

  Hello

  Is it possible to enable or disable the filter of writing EWF remotely with a script?

  Sending a command in a batch or the vbs.

  Thank you.

  In addition to HPDM, you can use the ewfmgr command in a script.  For example, ewfmgr c:-disable or ewfmgr c:-activate.  You will need describe reboots as well.

• Shooting 430 EX II remotely with 6 d

  Well, after searching around I know this question has been asked by many. And I got some very useful information. However, I have not seen an answer to a simple question that always baffled me. When you photograph the 430 EX II remotely with a 6 d, is a receiver and a necessary issuer or just the transmitter? Is that in some cases both are needed? Help, please!

  Recommendations for equipment that would also help would be appreciated.

  The 430EX II is capable of being an "optical" slave (it's builtin... no extra accessories are needed if used with a 'master' cannon).  It cannot be a 'master '.  In other words, it will work as a detached flash he gets 'line of sight' camera 'master' according to trigger the flash.

  The 6 d camera body is not a built-in 'trigger' (the 6 d is not a pop - up flash).

  In which is the 'master' (trigger), you can use either:

  • ST - E2 Speelite Transmitter (this unit works as a 'master', but is not actually a flash.  There also a beam of the development of assistance to help them focus in the dark.)
  • 600EX-RT - this is lightning flaship of Canon.  It can be a trigger or a slave.  It can also work optically or by radio. It also has a focus-assist beam builtin.
  • 90EX - this is a very small, ultra-low power flash, but it can work as a master on the camera to trigger a remote slave flash

  There are also third-party products that can act as a trigger and a receiver.  Some are expensive - and there are some more basic units which are relatively good cheap (but do not support E - TTL - flash would work as a 'manual' flash.)  Gun system supports E - TTL features.

  The 430EX II will be more reliable if you point the bottom of the body to make in the face of the trigger on the device (and then enjoy the swivel head to point the head everywhere where you need light.)

• Mashita dvd - ram uj-820 s is with record burning now! or windows

  Laptop Toshiba equium a160-155 came with record now!  Base

  Hi Phillund,

  ·         What is the exact error message that you receive?

  ·         Since when are you facing this problem?

  There are few users who had the similar problem and solved it, you can check out the link below and check if that helps.

  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=50720

  If this does not resolve the issue, I recommend you perform the clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• XMLTYPE with record type

  Hi friends,

  Is it possible to use XMLTYPE with record types?

  For example, in the following code I expect output voltage

  < TY_EMP > < > 1001 EMPNO < / EMPNO > < ADAMS ENAME > < / ENAME > < SAL > 5000 < / SAL > < TASK MANAGER > < / JOB > < / TY_EMP >

  The code is...

  DECLARE

  Ty_emp RECORD TYPE IS

  (

  EmpNo INTEGER

  , ename VARCHAR2 (100)

  NUMBER of sal

  , VARCHAR2 (100) employment

  );

  r_emp ty_emp;

  BEGIN

  r_emp.EmpNo: = 1001;

  r_emp. Ename: = "Adams";

  r_emp. SAL: = 5000;

  r_emp.job: = "MANAGER";

  -This line gives the error.

  dbms_output.put_line (XmlType (r_emp). GETSTRINGVAL()); -Here, I don't want to talk about all the fields in the record. I just need to specify the name of the record.

  END;

  p.s. to use object types to generate XML data...

  SQL > ed
  A written file afiedt.buf

  1 TYPE to CREATE or REPLACE ty_emp () AS OBJECT
  2 empno INTEGER
  3, ename VARCHAR2 (100)
  4, NUMBER of sal
  5, job VARCHAR2 (100)
  6*   );
  SQL > /.

  Type of creation.

  SQL > ed
  A written file afiedt.buf

  1 DECLARE
  2 r_emp ty_emp: = new ty_emp (null, null, null, null);
  3 BEGIN
  4 r_emp.empno: = 1001;
  r_emp.ename 5: = "Adams";
  6 r_emp.sal: = 5000;
  7 r_emp.job: = "MANAGER";
  8 dbms_output.put_line (XMLTYPE (r_emp) .getstringval ());
  9 * END;
  SQL > /.
  1001 Adams 5000 MANAGER

  PL/SQL procedure successfully completed.

  SQL >

• Microsoft Media Center remote with pace DC50X 1039, Setup box cannot change channel

  Can I use Vista Media Center to record only TV etc...
  Recently I had to use a configuration of Comcast Digital adapter carrier (DC50X) in order to get access to the channels.

  Vista recognize the Remote Setup Box, but it is not able to change the channels of the Remote Microsoft.

  On this page: http://mythtv.org/wiki/MCE_Remote I have the 3rd remote from left to right.

  I contacted PACE (the author of the configuration box) with the following response:
  ". The DC - 50 X uses a new remote protocol called XMP. Check to see if it can emit IR codes using the XMP Protocol.
  "If you use Microsoft remote issue codes using the XMP Protocol, it will not work with the DC 50 x"

  Anyone know if Microsoft Remote is able to use the XMP?

  Someone knows how the Media Center as the configuration box to change the channel?
  It looks like, it uses IR (due to the extra step of IR with the configuration box).

  If you have a WMC working with the DC50X, what is your Setup, what version of the distance, whats is your hardware configuration?

  My tuner (Hauppauge WinTV-PVR-500) can see the image, the sound is fine.

  Any help would be much appreciated.

  Deckard6, please see the Microsoft Hardware site:
  http://www.Microsoft.com/hardware/default.aspx

  Also try:
  Remote control for Media Center PC with Windows

  We can help you with Vista related components, if you feel that your Media Center software configuration is at fault for what you are experiencing, then we can try wrong turn, however, if it is indeed the remote transmitting Protocol, then it is not in our support framework. Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Using a remote control or the remote with two Apple TV app?

  1 can a remote AppleTV, is the most recent or a last generation we use with two different AppleTV (one is the most recent and is the older generation)?

  2. an iPhone Remote APP can be used with two different Apple TV?

  Thank you.

  1 not easily. There is no way to select the device to control, you end up control both. You could get a programmable remote control and lead to control different devices, but this would require a deception.

  2. no doubt. The Remote app offers a grid of all ATVS, he knows, and you choose the one to control. It has the advantage of a keyboard for searches, passwords, etc. Do you need a remote pair with each ATV.

• New remote with old iMac?

  Can I use the new Apple Remote (from the new Apple TV) with my iMac G3/500 DV - SE running 10.4.11?

  Yes, you can control the music on your iMac with the remote control of Siri.

• "Problem with recording device" - with no Microphone

  In short, despite not having a mic that I usually use Skype calls to be able to listen to friends when you play and do stuff in general. However today all of a sudden when we tried it auto-a ended the call with an error 'problem with the recording device '.

  It happens both with echo and simple restart does not solve the problem either.

  Apparently, with the new codec NGC (new generation call), which is now used for all calls from Skype, it is mandatory to have a microphone connected to the computer. Without a microphone, Skype calls will not work.

• The problem with recording

  Well, just at the moment where someone starts calling and he wants to take he writes "the problem with the recording" he calls here Echo and all the time the same... They advised you'd like?

  In Skype, open Tools-> Options-> Audio settings. Which device is selected as the Microphone. You have several options available in the select box?

• Series Satellite L supports wake up remotely with the remote software?

  Series Toshiba L does support waking the computer from a distance with the remote software?

  What cell phone do you have exactly?
  Which option do you mean exactly?
  WOL (wake up on LAN)?

  In most cases the WOL is supported by the BIOS.

• synchronize slides with recorded narration

  I try to synchronize and save slide show with balls and slides synchronized with the recorded narration but recorded track replay in registration mode although it plays fine in playback mode.

  recorded track replay in registration mode although it plays fine in playback mode.

  Do you mean you can select: play slide show recorded, but it does not at all read or he plays bad?

  If so, disable the check from: play > clear the record... then save the slide show again.