Kidak Offide Hero 6.1 printer

Similar Questions

• Heroes of Kodak 5.1 print my documents

  I installed my new wireless printer and it is connected and will print my computer printer software but does not my documents print.

  Hello

  Check with the printer manufacturer's support, their drivers and documentation online and ask in their forums
  (as appropriate) about the known issues. OEM for the manufacturer of the printer is responsilble for the proper functioning of the
  printer and their drivers.

  Kodak - Hero 5.1 printer
  http://store.kodak.com/store/ekconsus/en_US/PD/ProductID.234979700

  Kodak - Support and downloads
  http://support.kodak.com/app/intfSel/intf_redirect/L2FwcC9ob21lL3NyYy9nb3N1cHBvcnQvb3JpZ19pbnRmL2tvZGFrX2IyY19lbgis

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Printer KODAK HERO 5.1

  HI PRINTER DOESN'T PRINT BLACK DESPITE A NEW CARTRIDGE, CLEAN HEADS, A VERIFIED ETC ETC LLIGNMENT ANY IDEAS?  ALL THE USUAL SOFTWARE TROUBLESHOOTING NOT SHOWING ANY CURRENT PROBLEMS, BUT NO USED WHEN PRINTING BLACK INK

  Hello

  I forgot to include these links:

  Kodak - Hero 5.1 printer
  http://store.kodak.com/store/ekconsus/en_US/PD/ProductID.234979700

  Kodak - Support and downloads
  http://support.kodak.com/app/intfSel/intf_redirect/L2FwcC9ob21lL3NyYy9nb3N1cHBvcnQvc2VsZWN0ZWQvdHJ1ZS9jaGFuZ2UvdHJ1ZS9vcmlnX2ludGYva29kYWtfYjJjX2Vu/change_country/true

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Kodak HERO 9.1 all-in-One Printer

  I recently bought a hero 9.1 AIO printer.  I easily managed to install the drivers and software on the laptops wireless; However, the scanner for the USB driver does not install.  I spent many hours on the support chat and they took control of my computer and told me that it was a microsoft problem.  I have all the updates installed Vista, so I'm not at a loss of what to do next.  Can someone help me?

  Hello

  1. the printer works well?

  2. what message or an error code do you receive when you try to install the scanner?

  Download and install the drivers from the manufacturer's website.

  http://support.en.kodak.co.in/app/answers/detail/A_ID/32663/selected/true

  Check out the links below which deals with the addition of a network wireless or network device: frequently asked questions

   

   

  v Add or remove a scanner
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-scanner

   

  v working with the Scanner and camera Installation Wizard
  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-the-scanner-and-Camera-Installation-Wizard

  Hope the helps of information.

• HP Photosmart c3180: printer software did not install

  Hello

  I recently upgraded my PC and installed a new motherboard. Now, I've had my C3180 printer for 5 years now, whenever I have installed the printer software, I have had no problem on one of my computers. The software in question is the HP all in one series to my printer.

  Now here's the problem, after setting up my new PC, I'm trying to install the printer drivers to use the scan etc. The error is the software constantly gives it's when I try to install: cannot find USB drivers and a USB device "this computer has no support USB available for this installation. I tried the program several times and he refuses to install.

  Well, here's the catch, I installed all my USB motherboard etc drivers correctly and they all work. All my USB devices, keyboard, webcam, headset all work. Now on windows 7 64-bit devices and printers, the printer is actually shown and active. I even printed the windows program help and it prints that I need to fine.

  In Device Manager in the USB printer section he calls here HP Photosmart 3100 is active and has no problem at all.

  This is why I can only conclude this is the stupid software refused to install because it can not detect my USB drivers even if my USBs are working very well and I can even print the printer to start! My new motherboard is an Asus Maximum hero 8 with all the latest drivers to installed

  Thanks for all the suggestions that I really need to use the printer to scan using the HP software

  

  Hello

  (1) run the executable (i.e. AIO_CDA_NonNet_Full_Win_WW_130_140.exe) HP installation package
  2) open Windows Explorer and type % temp % in the address bar, and then press ENTER.

  3) navigate to the extracted installation folder, it will start by 7z (e.g. 7z1234S)
  Note: If there are several of these files to find the most recent sort by "Date Modified".
  4) go to the "Setup" subdirectory in this 7z folder.
  (5) move, delete or rename the usbready.exe file which is the Intel USB System Check utility.
  6) navigate the directory tree in the 7z folder and double-click the installation executable (Setup.exe)

  You can see any difference now?

• Software for 8500 A909g HP does not recognize the printer during set up

  I recently had some problems with malware that weighed my HP product.  When I removed the software and then reloaded the software, it no longer recognizes my all-in-one on the net work.  I tried the network diagnostic utility and that he sees the printer but when I click to check the connection, it does nothing.  What Miss me.

  Catherine,

  Download the installer and it works from disk hard went around.  I never thought that the CD was the problem.  Until your recommendation, I spent a lot of time trying to make it work.  Thank you very much, you're my HERO!

• Hero SDK - issue image source

  This is my first post on the site, however, I found many solutions to the problems of navigation on these forums.

  My problem is the following:

  I'm trying to create a list using an itemRenderer and it generated just well and most of the functionality works very well.  The problem is the image.  Everything else works (IE. The product name, quantity, etc.) using {data. Name of the node in XMLList}

  < s:Panel width = "200" height = "250" borderVisible = "false" chromeColor = "#2D455D" color = "#FFFFFF" cornerRadius = "10" fontSize = "16" title = "data.product_name}" >

  < s:Image = "5" width = "75" height = "75" horizontalCenter = "0" source = "{data.image_source}" / > "
  < s:Label x = '6' y = '88' color = "#000000" fontSize = "10" text = "retail price:" / >
  < s:Label x = "10" y = "106" color = "#000000" fontSize = "14" text = "Our price" / >
  < s:Label id = "retail_price" x = "70" y = "88" color = "#000000" fontSize = text = "${data.retail_price}" / "10" >
  < s:Label id = "our_price" x = "70" y = "106" color = "#000000" fontSize = text = "${data.our_price}" / "14" >
  < s:TextInput = "12" x = "145" height = "62" color = "#000000" text = "{data.image_source}" / >

  < / s:Panel >

  The image works fine if I put in a direct link (ie. ) http://www.somedomain.com/someimage.jpg ).  I did an Alert.show to make sure I was getting the correct link on data.image_source and I am indeed.  I can copy the alert message and paste it into a browser and the image comes back immediately.

  Then after that I couldn't get this to work I decided to take a step back and just do a simple example.  Basically just tried to set an image source using an xml result.  I did in Flash Builder 4 and Flex 3 without any problems whatsoever.

  However, in Flash Builder Burrito using SDK Hero can't seem to set the source of an image by using a value of xml at all.  I am baffeled by here and have tried everything I can think of to debug this without any result.

  protected function get_panel_products_service_resultHandler(event:ResultEvent):void

  {
  panels_xml = new XMLList (event.result.product);

  Image 1 - Direct link
  Alert.Show ("BEFORE:" + my_img.source); RETURN FRONT: null
  my_img.source = " " http://blog.internetnews.com/skerner/SMK/TestPilot.PNG "; "
  Alert.show ("AFTER:" + my_img.source);  RETURNS AFTER: http://blog.internetnews.com/skerner/smk/testpilot.png . IMAGE
  
  Image 2 - XML result
  Alert.Show ("BEFORE:" + my_img2.source); RETURN FRONT: null
  Alert.show ("XML Source of Image:" + panels_xml.image_source); RETURNS XML Source Image: http://blog.internetnews.com/skerner/smk/testpilot.png
  my_img2.source = panels_xml.image_source;
  Alert.show ("AFTER:" + my_img2.source); RETURNS AFTER: http://blog.internetnews.com/skerner/smk/testpilot.png . NO IMAGE
  }

  So basically even if the source print the same for each method to do the assignment, only my_img is displayed.  my_img2 has never at any time.

  Any ideas?

  Almost all XML and XMLList queries return an another XMLList.  Often, it becomes

  Auto-converti in a string, but some components such as Image and BitmapImage

  anything as a source will be so no auto-coercition takes place.

  Try: my_img2.source = panels_xml.image_source.toString ();

• Brother printer wifi "the printer is unresponsive.

  Hello

  I'm new to Mac but am generally competent computer/network.

  My son is in a the student house where 2 guys have Macbooks and 2 have Windows Mobile 10. the printer is a Brother wireless printer/scanner/fax.

  Among Mac users and Windows users can send impressions and analysis perfectly, but only one of the Mac users cannot.

  I deleted the printer and downloaded the latest drivers and re-installed but still cannot print.
  I tried adding via IP address but still does not work. I also tried the Air and BrotherCUPS, but none worked.

  HELP............!!!!!

  Greetings thequizman,

  Thank you for using communities of Apple Support. It seems that you experience problems printing to a Wi - Fi printer. Looks like you already have a troubleshooting. I recommend reading this article, you have already done some steps here, but there is more information you have not mentioned by train.
  
  

  If the issue is not resolved, take these last steps to remove all the drivers printer currently installed that might be causing the problem:

  1. Choose  menu Apple > System Preferences, and then click Printers and scanners.
  2. Control-click anywhere in the list of devices, and then choose "Reset printing system" from the context menu that appears.
  3. From the Finder, choose go > go to folder. Type /Library/Printers/ , and then click surGo.
  4. The Printers folder opens. Choose Edition > select all to select all the items in the folder.
  5. Choose file > new folder with selection to all the selected items in a new folder named new folder with the elements.
     To save storage space, you can delete the folder new folder with items after you complete the remaining steps.
  6. Follow the steps described in previous section once more.

  If your printing problem is not resolved, contact the manufacturer of the printer to support.

  Troubleshoot printer on your Mac - Apple Support

  Take care.

• print labels easy without using Contacts

  Print the sheet of labels with different addresses with Word for Mac

  Is this a question?

• Printer Driver HP LaserJet 6 p file

  I'll try to find a driver file for my HP LaserJet 6 p printer, it worked great until I upgraded to MAC OS Sierra

  Thank you for your help

  Try to configure your printer according to this instruction, the problems of printer on your Mac - Apple Support

• How to solve printing problems after update OS Sierra

  After the OS Sierra update, some of my files can not print from my printer. The message showed "internal error - an untrapped exception was raised. Choose 'continue' to continue execution in an inconsistent state. Choose 'Crash' to terminate the application and fill out a bug with Crash Reporter report. Choose 'Crash' will result in the loss of unsaved data. "Despite having chosen the above options, there is still nothing happen on the computer.

  Is there a way to fix this?

  Install a printer driver updated - check the site of the manufacturer for compatible drivers Sierra thew.

• My hp LaserJet 1022nw fails to analyze the download of the printer driver after that macOS Sierra upgraded.

  After switching to macOS Sierra, my printer (hp LaserJet 1022nw) WiFi does not print work orders, even if the printer seems to be to receive the order of work and how to complete it in the work queue.  Connect the printer to my MacBook Pro via USB, I am able to print without problem.  Other computers on the network continue to be able to print wireless.  When I connect via USB and try to scan a updated driver, download cause analysis a software fault message.  Any ideas on how I could proceed to continue to connect and use my printer wireless with the new OS?  The 1022nw is detectable as a printer available (wi - fi) and can normally be added to the list of printers, but doesn't have the print queue even thought that they seem to have been dealt with, and then disappear from the queue.

  Open System Preferences > Printers and Scanners and select the print tab.

  Then the right or control click on the printer on the left then click: reset the printing system

• I have an old imac running old 10.7.  I want to get rid of old printing software

  How can I safely get rid of old software/printer drivers?

  Visit the site for the manufacture of the printer and look for the instructions to uninstall.

• Canon MG7100 prints but will not scan after update of the iMac? How to fix?

  Canon MG7100 worked very well with the iMac - scanning and printing. After doing the updates of the iMac and installation Siri scanning does not work. Always printing. The printer/scanner Canon said - Set PC to start scanning - I have MG7100 added on the iMac. I opened (and re-locked) firewall to let in the Canon UJ utility. I deleted the all-in-one Hi - and added MG7100.

  http://support-Asia.Canon-Asia.com/contents/Asia/en/0100535401.html

  doesn't look like canon has a printer that takes in charge the newer versions of Mac OS x, if I were you I would take contact them to see if they plan on support of new versions, apple made no drivers for the hardware they don't and if hardware manufacturers does not provide a working driver head can group with the new version of Mac OS x We have to rely on manufacturing to have a download on their page

• iBooks printing

  Why am I not able to print the book I created in iBooks author?  It is a book very simple (a novel), text only.  I want her to be in book form.  The application will not allow this?

  For printing, you will need to create your book using one of the models that is NOT for epub.

  To ask Apple to add the functionality you want, go to

  http://www.Apple.com/feedback