Knowledge through program if a control is a typedef

I want to know programmatically if a control on the front panel is a typedef and I want to know the path or at least the name of his *.ctl file in the case. LabView knows it is related to the type definition, but I can't find the property where can be verified programmatically.

Thank you very much

David


Tags: NI Software

Similar Questions

  • I did no more than "volume control icon", error message says to add through "add programs" in the control panel

    original title: the Volume control icon

    I did no more than "volume control icon", the error message indicates to be added via "add programs" in the Control Panel, how can I do this?

    You are using Windows XP?

    This might help: http://support.microsoft.com/kb/319095

    And I hope that you have your Windows XP installation disc.

  • two other programs to lose control of cursor when loading firefox. Nitro pdf & on display at take-off from the software Center. Help, please

    two other programs to lose control of cursor when loading firefox. Nitro pdf & on screen takeoff on center software. Help, please.

    When I use the programs listed above and firefox is loaded, scrolling through these programs takes me at the edge of the window. I can't scroll 3 lines I can when FF is not loaded. I hate to say it, but FF is certainly the culprit.

    OK, if I may ask, what also happened when Firefox is in Mode safe? That will do this troubleshooting step, is whether this is caused by an add on that you have in your profile. Questions to troubleshoot Firefox in Safe Mode

    Moreover, the fact happen on the touchpad, as well as with an external mouse (if it's a laptop, if not, please ignore)Reset Firefox preferences to troubleshoot and solve problems

    Does this happen with accelerated scrolling on? This setting is in preferences/Options > Advanced Options > general

    Please post back with your results, thank you!

  • missing iTunes in Add/Remove programs in the control panel

    I'm trying to uninstall iTunes on my laptop and when I go into the control panel by clicking Add/Remove Programs, iTunes is not listed, but it's always in the start menu and on the desktop. How can I remove iTunes, in order to remove the other five components?
    It's the order of apple support told me to uninstall iTunes:
    1 remove iTunes
    2 remove QuickTime
    3. remove the Apple Software Update
    4. Remove Apple Mobile Device
    5. Remove Hello
    6. Remove Apple's Application Support (iTunes 9 or later)
    I have things for steps 2 through 6 in Add/Remove programs in the control panel but not iTunes.
    Help please!

    Hello

    You can start uninstall with Quicktime and then check.

    See the article below for assistance. For more information, contact Apple support and check.
    Remove and reinstall iTunes, QuickTime, and other software components for Windows XP
    http://support.Apple.com/kb/HT1925

    I hope this helps.

  • Impossible to uninstall a program through programs and features

    I had a problem with an excessive amount of pop ups lately in my chrome browser and found a few basic programs installed on my laptop. I tried to uninstall the malicious software through programs and features, but when I type on uninstall or remove nothing happens, and the program won't uninstall.

    I tried to restart and uninstall then again through programs and features, but had the same result.

    Y at - it another way to uninstall programs in windows 8, or someone has suggestions?

    Moved from Forums of Windows 7.

    Hello

    For popup windows.

    Scan your Windows 8 machine for malware, if necessary using the safe mode with networking:

    "How to start Windows 8 and 8.1 in Mode safe '

    http://www.eightforums.com/tutorials/2757-safe-mode-start-Windows-8-a.html

    Download, install, update and scan your system with the free version of Malwarebytes AntiMalware and if necessary do in Mode safe mode with networking:

    http://www.Malwarebytes.org/products/malwarebytes_free

    ______________________________________

    And also scan with the free version of SUPERAntiSpyware

    http://www.SUPERAntiSpyware.com/download.html

    SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

    SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

    ______________________________________

    It is a very good program to scan your system to remove adware, etc.:

    http://www.bleepingcomputer.com/download/adwcleaner/

    AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

    _____________________________________

    And just to be sure, nothing is lurking in the background:

    'TDSSKiller Rootkit Removal Utility download for free'

    http://USA.Kaspersky.com/downloads/TDSSKiller

    @@@@@@@@@@@@@@@@@@@@@@@

    For problem programs.

    Try this free Revo Uninstaller program to remove it.

    http://www.revouninstaller.com/revo_uninstaller_free_download.html

    "How-to" instructions for use are included here: read the information on the tabs at the top.

    ______________________________

    Try this "Fix - It" Microsoft to uninstall programs the problem;

    http://support.Microsoft.com/mats/program_install_and_uninstall/en

    What it fixes...
    • Registry keys damaged on 64-bit operating systems
    • Corrupt registry keys that control the update data
    • Problems that prevent the installation of new programs
    • Problems that prevent existing programs are completely uninstalled or updated
    • Problems that are blocking you from uninstalling a program through the item add or remove programs (or programs and features) in Control Panel

    See you soon.

  • I can't get into programs in my control panel; He advises lack file "C:\Windows\system32\rundll32.exe. What happened, please!

    Also, once in addition to not enter the programs on the Control Panel, it says corrupted boot file, a copy of the original.  I'm sorry, I'm not very computer savy.  Could someone please inform me of what has past.  I am an older woman and need help for many, LOL!  Thank you!!!

    Hello

    1. who is the operating system installed on the computer?

    If the operating system is Windows XP, try and run the steps mentioned in the link below,

    Cannot find the Rundll32.exe file when you open Control Panel

    http://support.Microsoft.com/kb/812340

  • Changes to the definition that is not reflected in the program using this control type.

    Hello

    I'm having a problem with a type definition, that once I have make changes by adding another element to the enum changes do not appear in the program and the program control is grayed.  I had this problem yesterday, but just decided to remove the type definition file and rebuild a new.  But today when I did change the enum in the program say it is disabled.  I joined the program and the control file.  I wish you to know why I'm having this problem since it seems to happen whenever I make a change to the control.  I am running LabVIEW 2010 on a Dell dimension 2400 using Windows XP with service pack 3 5.1.2600.  I was wondering if LabVIEW 2010 has all the questions running on XP which can cause this kind of problem.

    I tried your program in 2010sp1 and in 2011, and I have no problem. Once you modify the type definition and add items to the enum, the instances will become gray until you 'apply changes' or 'save' the typedef. After that, all instances of the typedef is updated with new items.

  • Error: could not find everything in trying to access Add / Remove programs in the control panel

    Title: cannot open Add/Remove programs in the control panel

    When I try to open Add/Remove programs in the Control Panel, I get a message that it can not be found.  What should I do to repair this?

    Hello

     
    -Did you do changes on the computer before this problem?
     
    Method 1: I suggest you to follow the steps and check if the problem persists.
    (a) click on Start, run, type cmd and press enter.
    (b) in the command prompt, run these commands:
    regsvr32 Jscript.dll
    regsvr32 Msi.dll
    regsvr32 Oledb32.dll.
    regsvr32 Msado15.dll.
    regsvr32 Mshtmled.dll
    For reference:
    Control Panel not responding in Windows XP
     
    Method 2: If the problem persists, I suggest that allowing you to run the system (CFS) files Checker scan to fix corrupt files.
    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
    http://support.Microsoft.com/kb/310747

    Method 3: An analysis using the Microsoft safety scanner.
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Hope this information helps.
  • I'm unable to open Add/Remove programs in the Control Panel, all other bits in the control panel can be opened.

    Add/Remove programs. I'm unable to open Add/Remove programs in the Control Panel, all other bits in the control panel can be opened. Any ideas? Thank you.

    original title: Add/Remove programs.

    Hi, Tay 13,

    Open command prompt window

    type the following command

    SFC/scannow

    Press enter

    Note: There is a space between SFC and / scannow

    Once the scan is complete, look for the journal by clicking Start > run

    Type

    %windir%\Logs\CBS

    Search for repaired files or cannot repair file and note the name of any file not repaired.

    New attempt to open Control Panel Add/Remove section.

    Open the command prompt window

    Type the following command

    appwiz.cpl

    Press enter

    This will open Add/Remove programs

  • How to remove programs in the control panel?

    Original title: Control Panel

    How to remove programs in Control Panel, flash is stored in security and fast is to other Options. How to remove them or move them to the storage of program?

    Hello

    To remove a program shown in Control Panel, you will need to uninstall the real
    program. Just remove the display icon in the control panel would not any operation
    of the computer.

    If you experience problems with Flash Player:

    Troubleshooting player stability and performance
    http://blogs.Adobe.com/JD/2010/02/troubleshooting_player_stabili.html

    Flash Player Support Forums<-- more="" knowledgeable="" flash="" player="" help="" available="">
    http://forums.Adobe.com/community/webplayers/flash_player

    Uninstall Flash Player - Windows
    http://kb2.Adobe.com/CPS/141/tn_14157.html

    Flash Player forums
    http://forums.Adobe.com/community/flashplayer

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • I can't uninstall a program from my control panel

    I can't uninstall a program from my control panel

    Original title: I can't uninstall at add on my control panel

    Hello

    It helps us to help you if you tell us the name of the program.

    Try this free Revo Uninstaller program to remove it.

    http://www.revouninstaller.com/revo_uninstaller_free_download.html

    And scan your system for malware:

    Download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

    http://www.Malwarebytes.org/products/malwarebytes_free

    And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    See you soon.

  • My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '.

    Original title: can you help me?

    My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '. I'm vwindows vista

    My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '. I'm vwindows vista

    You in fact 2 questions.
    I will answer the one who is the most important, for you it is.

    RE: Change startup programs

    You can access this way startup programs...

    Start button > in the search box, type msconfig > Enter > click on Startup tab. Here's your startup programs.
    To disable, uncheck the box in front

    To activate... check the box opposite.

    RE: Windows Defender cannot be found.

    If you have the following AV, antivirus, programs installed, close your Windows Defender. Purpose of these AVs have their own advocates. 2 defenders on the same machine will create conflicts.
    Bottom line: it's ok. It's normal.
    List of AVs which will stop Windows Defender:
    Norton
    McAfee
    AVG
    Microsoft Security Essentials

    If you don't have AV programs above, here's how to restart Windows Defender:

    Start button > in the search box, typeServices > press the Enter key > scroll to find Windows Defender, click on it >...
    topic status , it must be said... Has begun
    under Startup Type, it must be said... Automatic
    If it does not say that, right click on Windows Defender > click Properties >
    in Startup Type, click on the pointer to the right and select automatic
    to the service status, click Start
    Click OK when finished.
  • Cannot save via the speaker through programs such as Audacity. Solvable?

    Cannot save via the speaker through programs like Audacity without horrible sound quality. Solvable?

    Hello

    • What happens when you try to save through the loudspeaker?
    • You receive an error message?
    • If it works well before?
    • What were the changes made before the issue started?
    • You are able to register normally?
    As you can not record with audacity, the problem seems to be related to the audacity.
    I suggest you to contact the support of Audacity for assistance on the issue. See the help link - below

    http://Audacity.sourceforge.NET/contact/

  • "Could not open INSTALL. NEWSPAPER"when I try to uninstall Yahoo messenger and other programs of the control panel

    Original title: "Could not open INSTALL. JOURNAL ".

    We get this message when I try to uninstall Yahoo messenger and other programs of the control panel.

    Hi thomaskirchoff,


     

    (1) how long have you been faced with this problem?

    (2) what is the complete error message you receive?

    Method 1: You can see the steps in the Yahoo link below

    http://help.Yahoo.com/kb/index?locale=en_US&page=content&y=PROD_MSNG_MSNG10&ID=SLN649&impressions=true


     

    Method 2:

    If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

    Method 3:  Put the computer to boot and then check if the problem persists

    Follow step 1 in the link below,
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  • How to remove programs... I can't find the title "add and remove programs" in my control panel

    I can't find the "add and remove programs" in my control panel

    The names have changed.

    http://www.bleepingcomputer.com/tutorials/tutorial141.html

    How to uninstall a program in Windows Vista

    Read the tutorial above.

    http://www.vista4beginners.com/Add-Remove-Programs-nowhere-to-be-found

    "Add/Remove programs - not found?

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for

  • Safari does not a lot of pages

    Lately I have been seeing a problems with Safari 9.1.2 where it will start to load a page, but just not there on a large number of sites, including those that should be rock solid as BBC news, or even Apple. It starts to load, but just made a break a

  • Why my tabs have stopped working

    It doesn't matter how many tabs 'Open' my favorites using the first tab, even if I'm supposed to be connected to a new tab. The address for the 1st tab displayed in bars to address all new tabs. A previous question, I noticed that an adds Ask has bee

  • NB200 - screen resolution is not enough to run the update

    I am trying to install an update to a program that I already have in my NB200 and I can't because it says the resolution of the screen is not sufficient for the execution of this update. Can someone suggest a 'fix' for this please?

  • USB communication failed by MAX but not by ACE

    Hello I'm trying to control U2600A i/o Modules of Agilent connected via USB with NI-Visa. I was able to establish communication using ACE, but when I tried via MAX, orders failed every time. I have gone through the tutorials and double checked my con

  • Windows Explorer crashes when you try to open avi files

    I can't open avi files as windows Explorer crashes, if I open even a folder with an AVI in it, then windows Explorer crashes. I tried to run the Mats_run_codec from microsoft, but it just says: I need to run dot_run_fx (box 2), but when I run it I ge