Kodak ESP C310 printer has stopped working

Similar Questions

• I try to install the Kodak ESP C310 printer, but it is said that a firewall is not blocking the installation. Can you help me?

  I try to install the Kodak ESP C310 printer, but it is said that a firewall is not blocking the installation. Can you help me? I use windows XP. I tried port 5353 and this is what allows to Hello.

  You can check this article, but it's about Firefox itself do not have access.

  http://KB.mozillazine.org/firewalls

  Could you give the exact wording and punctuation of the message and try Googling yourself - when google you do not without importance and punctuation, words of group who are always together as original in quotation marks or hyphens message that google will look for these words together in that order.

• I recentley bought a kodak esp c310 printer - is this compatible for windows xp

  where can I find a list of the printers compatible windows xp

  Download and install: Home Center software to print all in one KODAK (including drivers)

  Then download and install: KODAK ESP C310 firmware of the all-in-one - printer WINDOWS operating systems

• LaserJet P1102W: Printer has stopped working

  I've had my printer for over a year and never had a problem.  A few days ago the printer stopped working.  I tried to print and it would not allow me.  He wanted to come to save the document, instead of giving me the privilege to print the page.  I tried reloading the software and kept getting errors that the installation has failed.  I removed the software and tried to charge it and now I can't even load the drivers or downloads.  My mistakes are "a new printer was not installed.  I tried to click on the troubleshooting button and it says my "printer spooler does not work.  I tried to go into services and right click on "Printer Spooler" to start.  Still nothing.  I don't know what to do.  Can I get help from someone.  I've been at this for 3 days now, trying to use my CD to load the software to go on the HP website to download the software and drivers and still, I get the same errors.  It is a great printer and I don't want to have to replace it.  Please help >

  Hi cmspina,

  Thank you for joining the forums of HP Support for a solution to your printing problem.

  I understand that you use a printer HP LaserJet Pro P1102w with a Windows 7 PC, which ceased print and also, you can not reinstall the software and drivers for the printer. I would like to help with that.

  I would like to start by running the HP print and Scan Doctor. This tool allows to diagnose and fix the problem printer software and printing challenges.

  Please let me know if that solves the problem, or if you need assistance.

• somehow my printer has stopped working and the computer tells me that an unknown error has occurred - can someone tell me what happened

  My printer no longer works the computer tells me an unknown error has occurred, can you help me understand?

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  http://support.Microsoft.com/GP/printing_problems

  Read the information above from Microsoft about fixing printer problems.

  ·

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• All of a sudden my hp 1018 printer has stopped working

  I have a HP 1018 printer

  I use window7 64 bit

  The printer works fine on this computer, but all of a sudden it stopped working. (no changes made to the front of the computer)

  When I run windows troubleshooting it tells me that all is well

  I tried to download and install the latest software several times, but it never ends the installation, he said only: "facility" for hours, but nothing happenes.

  At one point, I had an error in the spooler, but I get over a long time.

  Then the other day, after trying to install the driver once more, I'm suddenly endlesly was able to print a Word-dokument.

  But the next day, I still could ' t print.

  Today I tried to download and run your software: print and scan doctor. He told me that everything was good and same printet me a test page.

  But I am not able to print anything all programs (word, pdf, browser etc)

  I tried to uninstall the printer and install again. Nothing works.

  Do you have any suggestions on what to do next?

  Best regards, Mette Sørensen

  Try to STOP and RESTART your printer spoller. I see you have an error in the front.

  1. click on Start Menu

  2. right click on COMPUTER

  3. choose MANAGE

  4. click on SERVICES and APPLICATIONS, and then click SERVICES

  5. scroll down until you see Printer Spooler. Stop and then restart. Check the results and try to print.

• My Epson printer has stopped working with Firefox today. It test pages works on laptop and works with IE. Until today, he has worked with Firefox. Why can I not print anything from the internet with Firefox?

  Until today, I did everything with Firefox. Then I was on Paypal and went to print a shipping label and the printer will not work. I went to troubleshoot page and printed a test page. I uninstalled my printer and then re-installed. Still would not work from a Web page. I did a system restore. Still did not work. Called Epson. They say that it is a problem of Firefox because it works on the pages of specifications and testing. I installed IE and the printer works. What happened and how can I return to work with Firefox?

  Try of the reset described here:
  
  http://KB.mozillazine.org/Problems_printing_web_pages#Reset_pr...

• I have a kodak w100 webcam which has stopped working.

  I tried to get drivers updated kodak online but can't. I have uninstalled and installed software and unplugged and pluged in the USB several times, in different ports. nothing seems to work. The camera runs on another computer. It also shows a picture in the kodak software if I lower resolutions and it shows and image in microsoft silverlight config. It will not work on Skype or windows messenger. When I check the Device Manager, it appears like device usb video #1,2,3 depending on which usb port I plug it in and not the name of the webcam. As I said use to work, I tried the system restore, but it goes back only to dec. someone has any ideas

  Run Windows Update and install all updates.

  Update your Skype and other programs that use the camera.

• HP P1102W WIRELESS PRINTING HAS STOPPED WORKING

  Our P1102W lost the wi - fi connection and we cannot get it back.  Seems to be a printer WiFi issue.

  It is one of two HP printers (other is a 5510) using a wifi network at home (WPA2, w/password), accessible by a Dell laptop and an Apple MacBook AIr (mines).  Two computers can access the 5510.  Both lost the P1102W.

  The blue network on the P1102W is no longer regularly lights up.  By pressing the button on the P1102W wireless accomplishes nothing.  Electric bike achieves nothing (but used).  Moving the printer does not help.  P1102w works fine on USB key.

  We tried to reset the Modem and the router. No change.

  We have reinstalled the software. No change.

  We tried to run the instructions from HP to make the printer wireless using Printer HTML Config Utility, but there page does not load in Safari. (Very frustrating).

  Self test shows

  Firmwarer Datacode 20120814

  Version of the driver software = 20091104

  State of the information network not connected

  Hardware address = 00:00:00:00:00:00

  IPv4 = 0.0.0.0

  Subnet mask = 0.0.0.0

  default gateway = 0.0.0.0

  Hello name =

  802. 11 b / g wireless

  Status = active

  Comm mode = invest

  Name the network SSID = myuniquenetworkname

  = WPA/WPA2 authentication

  IP configured by = manual

  Server DHCP/BOOTP = 0.0.0.0

  0.0.0.0 WINS server

  Printing of pages = 6218 so far

  Hi @maddog8212 ,

  I see that you have lost connection with the P1102w wireless. I will definitely do my best to help you.

  I would like to reset the printer first to clear the previous network settings.
  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration report and check the SSID address and IP are disabled.
  Print a Configuration Page.

  Plug the USB cable from the printer to the computer.

  I have provided Windows and Mac steps, you can choose how you want to set up the printer again.

  Windows as follows:

  Run the Wireless Setup to set up the printer on the network again.

  Go to start, all programs, HP, HP Laserjet P1102w, then select Wireless Network Configuration.

  Steps to configure the wireless.

  Then, unplug the USB cable.

  Test the printer.

  Mac as follows: (since you mentioned that you had the HTML option for your Mac)

  Make sure that Safari is set as default browser. (sometimes the SAP will not open if it is not set by default)

  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Close all applications.

  In the Apple menu bar, click Go, computer, MAC hard drive, library, Printers, HP, LaserJet, click the folder for your printer, click browser EWS or HTML config, it should open the webserver integrated for the printer to set up the wireless, and then click the network tab, click on wireless on the left and fill out your information. (be sure to infrastructure is selected and alpha or numeric is selected) Apply the settings.

  You should get a solid blue light on the printer in 1 minute about.

  Remove the USB driver, then add the network printer:

  Click on the Apple.
  Click on System Preferences.

  Click the printing and scanning.

  Select the printer, and then click the sign - to remove the printer. (USB driver)

  Unplug the USB cable.

  Then click on the + sign and select the printer from the list and click Add. (Hello P1102w)

  Try to print.

  If you have run Setup for the wireless again on Mac in the first place, on the Windows computer, simply create a new port.

  Go to start, devices and printers, click right on the printer and on the left, click printer properties, select the ports tab.

  Click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.

• Printer has stopped working - status of network offline

  My Officejet series 4600 (4622) worked well for almost two years with a USB connection. Yesterday I interrupted while he was printing a document (something I've done before), and then I could not do print again. The computer can detect the printer but says it is "not connected".

  The powers of printer on / off power of the fine. He made copies. It is not blocked. His configuration of said network status page: Type of connection offline and Active: No.

  Also the printer does not print with the laptop that we print occasionally. The laptop also says that the printer is not connected.

  I tried turning power and off the computer, the printer (separately and together) and the router. I changed the printer cable for different ports on the printer and the computer. I got a new printer cable. I used the doctor scanning & printing to HP. I removed the printer and re - he added. I uninstalled the printer and re-installed driver software (the latest version). Nothing has worked.

  Do I need a new printer, or y at - it a solution that I have not tried?

  Thank you for your help... After posting my problem, I found that it was indeed a connection problem with the cable.

• network printer has stopped working

  I have a Dell Vostro 3400, running 32-bit Windows 7. I installed the drivers for a printer laser jet HP M1212nf. I can print when I am connected via a USB cable.

  Until recently, I could also print through a network (the printer is connected to an iMac, and both computers are networked). I installed Hello. Now, when I select the printer in the network - among my devices listed - battery a few print jobs to the top and do not print. I ran software problems of MS, but in vain.

  How to get network again printing work?

  It is most likely either a problem on windows print spooler (go into services and stop it and then restart) or a problem with the part of mac... She said something on the server in offline mode?

• HP Officejet Pro 8500 has more: printer has stopped working

  HP printer works well until 1 month ago.  print only through bluetooth.  Now when hit copy, the screen indicates can't copy, scan or fax.  put power off the printer and restart.  I made this numerpous time. with the same results.  and same opinion.

  Hello

  Scanner failure indicate a hardware failure of the bulb scanner and may require maintenance of the pritner.

  Follow these steps to solve this:

  http://support.HP.com/us-en/document/c00587971/

  Shlomi

• OfficeJet pro 8600: double-sided printing has stopped working

  I recently had to restore my RT Windows 8.1 running Surface.    Before that my printer was working fine.  After, I had a problem with documents stuck in print (QC) I finally corrected which but now my documents will not be 2 sided.  No matter how many times I select two sides printing in the print dialog box, it will not do it.

  When I go to the properties of the drivers it says duplex printing is not installed.  I don't know how to enable this option.  I've uninstalled and reinstalled the driver several times.  Well Finally, who sets the printer problem, it did not solve duplex printing.

  Any help would be appreciated.

  Hello

  In the Control Panel select devices and printers.

  Right click on the printer icon 8600 and select printer properties.

  Open the device settings tab and set as installed two-sided printing accessory.

  Confirm the changes and two-sided printing becomes available.

  For any questions, access the control panel can help the following video:

• Error message - status of the Interface Windows printer has stopped working

  I am able to print just one document for this error message to appear.  It happens every time I try to print.  When I restart the computer, it prints the current document.  The error occurs once I can't cancel the document or do anything with the printer.

  
  

  How can I fix these errors?

  Hello
   
  1. did you of recent changes on the computer?
  2. who is the manufacturer of the printer?
   
  Try these steps and see if you can print without problem.
  Step 1: Update of the printer.
  1. visit the printer manufacturer and check whether there is an updated driver.
  Visit this link for more information: http://windows.microsoft.com/en-US/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
   
  Step 2: Run Microsoft troubleshooting to solve the problem.
  1 visit the following link and click on "Run now", follow the instructions to run the Troubleshooter: http://support.microsoft.com/gp/printing_problems
  2. print and check if you are able to print multiple documents without any problems.
   
  If the problem persists, contact the manufacturer of the printer.
   
  I hope this helps.

  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP 8050 printer has stopped working. How can I check the ink levels

  My HP Photosmart 8050 stopped printing.  How can I check ink levels?  It keeps the pages to print in black and white or in color.  Thank you

  The HP Setup disk to install a Toolbox utility to manage the printer.

  In the control panel select print a Test Page. The 3rd section down is the estimated ink levels.

  Do NOT use cartridges 3rd party reused, keep genuine HP cartridges.