KODAK ESP office 2170 does not print in black and white

Similar Questions

• Printer does not print in black and white

  Hello

  I just bought the HP OfficeJet Pro 8610. It connected fine, but I can't print color prints. I get not anywhere, an option to choose the color, print or black and white. Can anyone help.

  I work on a mac, 10.8.5. Thanks for your help.

  Thanks for your help. The solution was to remove the printer and add it again. After doing this it worked perfectly!

• HP Deskjet Ink Advantage 1515: The printer does not print in black and white

  Whenever I have print using my "Hp Deskjet Ink Advantage 1515' black ink never gets printed.

  Color ink seems to work very well. The cartridge ink levels are really low. It is a problem since I use black and white for documents without photos. When I print something in black, I get everything just a blank page

  

  I ran hp print and scan the doctor but it did not solve my problem, instead, she updated driver for the printer that was not really helpful.

  Hello, abdulmajid13,

  If printing works very well in the beginning, black print cartridge installed, you screenshot, now the black ink is about 20%. But is that the ink level "estimated".

  I recommend you replace the black cartridge. If the problem is still there with a new cartridge installed, you may need to contact customer service, they will help on troubleshooting below.

  Hope this helps your question.

• Why can I not print in black and white only?

  Why is the HP Officejet Pro 8600 more unable to print black and white only if the black cartridge is not empty?

  What I mean is that I went into the settings to set the printer to print black and white only but also print text in black only.  Yet, I HAVE to replace the cyan, magenta and yellow cartridges, because they are exhausted.  Nothing to do with black printing, whereas a SEPARATE black cartridge is and is always full should cyan, magenta and yellow ink?

  I'm aggravated about how the driver for this printer is designed TO FORCE me to buy cartridges not black when I deliberately put printing be BLACK ONLY.  I'm unable to move forward with my impression.  This is considered to be a show-stopper and is unacceptable as the setting that I've assigned and exhausted cartridges message contradict each other.  If the adjustment is made for print in black and white only including text, then print black and white, because I know that the black ink is still available.

  Take into consideration that printing may take place at any time.  Not being able to use black as my other color (WHICH IS NOT EMPTY AND IS A SEPARATE CARTRIDGE) forces me to stop.  I can't go forward until the store open.  Wal-Mart isn't always an option.   It's lost time.

  The inability to switch to self-supply to meet to use the black cartridge is only a waste of time.

  Call it for what it is, a form of ransom. HP wants me to spend the money on the color cartridges that have nothing to do with black and white printing.   When I am ready to print in color, which should be a time of my choosing.

  Either way, the form, which I am trying to print is black and white only.  No color is on this form.  It is foolish to force printing in color to a black and white document.

  Hello

  Specially protect the print heads printers much NEED other inks even they only print in black. During the warm-up process, printers require all inks so they can stop before we continue. Some printers allow printing (especially those who have the ink tank three colors), but they can print at a speed of snail baby.

  Kind regards.

• My HP Photosmart C8180 All-in-One Printer does not scan the black and white film strips or slides.

  This problem occurred recently. Previously, the scanner accepted slides and strips of black and white film and scanned them without any problem. Since I've updated the OS on my iMac (I am currently using OS X 10.6.8), I contacted Applecare because I thought that it was possible that my current operating system might have some incompatibilities with the C8180. 'Expert' AppleCare then accompanied me by a uninstall/reinstall, but it has not solved the problem. AppleCare said then that the problem is no doubt HP hardware failure. I find it quite peculiar since the scanner otherwise Applecare analysis works and there is no problem with respect it print or copy.

  Hi, JAOC,.

  Your C8180 can scan slides or films fixed on the memory card.  This will allow you to test the scanning equipment.

• HP Photosmart 7350 will not print in black and white

  This camera has served me well for printing color photos and other things for several years.

  Ink is EXPENSIVE, and I have several text documents I want to print. I have several

  56 ink cartridges (black).

  I can simply not a black and white "no photo" to print.

  I tried with the 56 and 57 (beside him) inside AND out. I tried to select in grayscale,

  in all three sub-options (high quality cartridge, black only, optimized for the FAX). Tape

  is NOT yet on the 56 cartridge. I do not use any mode of 'keep the ink' I know.

  The best I can get using the FAX setting optimized (I think) is very pale, a bad quality

  print page - words too dark, I can barely read (light grey). I suspect it is sucking

  the cartridge (cyan-magenta-whatever) 57 to print it.

  I have trouble-shot days before that by typing. I googled this problem both

  in the HP forum and out through Google. What I'm trying to make is so basic and...

  I dare say, 'simple', that I can't believe is not possible.

  Thanks in advance!

  The print head is the rectangular silver part at the bottom of the cartridge on this particular model.  It would seem that the question be electronic printer failed, but before you give up, please try soaking in hot water with one of the printheads. It is possible for the accumulation of ink on the print heads to leave a stain on the fabric during the test, this could be confused with the strong task resulting from a cartridge to work.

• Printer does not print in black and blue

  Product: HP Photosmart C3180 all-in-One

  OPERATING SYSTEM: OS X 10.4.11

  no error message

  no change in advance

  My C3180 All in we decided to print only in black and blue a few months ago.  First I thought that it a bad cartridge, but it took a lot of time to exhaust.  The next color cartridge-same thing.  Next same thing (a new HP) cartridge.  No cleaning, uninstall/reinstall or any what other thing was forced to print what either other than black and blue.  Printer has been great for three years until now.

  Next step... skeet shooting?

  Thank you, Don

  Hi Julie,.

  YAY! So happy that it worked. You may mark this as resolved?

  You could have gotten a replacement of the genuine HP cartridge if it was under warranty:

  http://support.HP.com/us-en/document/c00206040

  Don't forget to make use of it, if you have a worse (not need different discipline).

• Photosmart 6510 does not print in black

  My photosmart 6510 does not print in black. I presume that it was the cartridge but I replaced the cartridge and it still does not print. I cleaned the print heads and the cartridge ink levels are full.

  The printhead, cleaning of the screen failed touchscreen printer running.  But when I sat down at my computer and used the program utility printing, he did.  I ran an initial print head cleaning my computer and then clicking the button indicating that the print heads were NOT clean.  He then ran a deep cleansing process.  Then I lined up the printheads of the same print utility program.  Now it works!

• MP620B printer does not print in black ink cartridges

  Original title - MP620B printer

  Does not print in black ink cartridges

  Fine color cartridges work

  No band orange on the cartridges

  All cartridges lights bright red

  Hi LarryChristenson,

  This request is outside our borders to support. It is preferable that get you in touch with support from the manufacturer of your printer to alleviate your problem.
  Kind regards
  Sergs P.

• Photosmart HP 5510: The printer does not print in black

  All of a sudden, my printer does not print in black. I replaced the cartridge with a new black cartridge with the same result. All other colours print fine. I checked the settings on the device and it shows that the black cartridge is full.

  If anyone has had this problem and can offer a solution? Thank you very much.

  In the paper here troubleshooting steps can help solve the black does not print on your Photosmart 5510.  Be sure to check the events on the cartridge, as described in the document.  If you go through all the troubleshooting steps without resolving the question then can help to manually clean the print head as shown in the post here.

• envy4500 HP does not print (only testpage and partial pages)

  envy4500 HP does not print (only testpage and partial pages)

  Windows 8.1

  the connection usb or eprint even problem

  for two printers ip was added as a port in printer properties

  Help, please

  old brother printer is dead and this news does nothing

  Problem was new printer, new black cartridge but cartridge did not work! Installed another and all = ok.

• OfficeJet 660: My printer does not print in black only

  I want to print in black and white, but my printer does not print because my yellow ink is empty.  I tried to change the color to black and white, but it still won't print. Seems ridiculous that all would have to have something in it just to print in black and white.

  You have an Officejet 6600?  This printer has a print head permanent and separate ink supplies.  Little ink is required in all colors to print, even if you print in black only and only one of the colors came out.  (When printing in black color print head is always waving around in the air.  There are few available ink to prevent the nozzles from drying out and butcher them.)

  See here for more information on how the ink is used.  In the terminology of this document, the Officejet 6600 is an IIC printer.

  Sorry, you need to replace the ink color depleted.

• Photosmart 5220 - new black ink installed according to the instructions, and will not be printed in black and white

  Hello

  Today, I installed a new HP 564 Black XL cartridge in my Photosmart 5220 according to the instructions.

  Since then, I cannot print in black and white and the pages come out blank.

  Can anyone suggest how to fix this?

  Thanks in advance

  The document here can help solve the black does not print on your Photosmart 5520.  Be sure to check the vents, as on the three solution.

• HP officejet pro 8500 a910 does give me the option of printing in black and white

  Hello

  My hp officejet pro 8500 a910 does give me the option of printing in black and white. How choose to print in B & W when the option does not appear under properties?

  Thank you.

  Hello

  Used to print application, click file > print

  Click Properties or preferences to access the Printing Preferences dialog box.

  Click the Advanced Options button at the bottom of the window.

  According to the characteristics of the printer, click on the area of selection of printing in grayscale and as high-quality grayscale or black ink only.

• I have cs6, when I try to use channels to hide every time I choose one of these channels, the peak towers all this color, it does not appear in black or white.  Why?

  I have cs6, when I try to use channels to hide every time I choose one of these channels, the peak towers all this color, it does not appear in black or white.  Why?

  It may also be that in the Photoshop (Edit) > preferences > Interface you can view layers in colors checked.