KSERVICE. EXE in c: Windows/Prefetch

Similar Questions

• I get an error message «c:\WINDOWS\Prefetch\TASKMGR.EXE-06144C13.pf is corrupt, run Dskchk»

  c:\WINDOWS\Prefetch\TASKMGR.exe-06144C13.PF corrupted

  I ran Dskchk several times and I still get the error.

  Is it possible to replace or repair the file.

  I also run Microsoft securty Scanner with no detected viruses.

  A word on what to do?

  In what circumstances this error comes up?

  When you run chkdsk (not dskchk), did you use the /F switch (i.e., chkdsk/f)?  Otherwise, errors are detected only and not fixed.

  The files in the Prefetch folder are used to improve performance.  As a general rule, you should leave this file only because Windows XP will periodically clean older files.  See http://www.edbott.com/weblog/2005/06/one-more-time-do-not-clean-out-your-prefetch-folder/

  On the other hand, although empty manually the Prefetch folder will cause a temporary decrease in performance, doing so may be justified if there is a corrupted file, as in your case.  See http://support.microsoft.com/kb/915163/en-us

  Thus, if running chkdsk /F (you'll have to answer Yes and then restart) is not fix things to the top, go to C:\Windows\Prefetch and delete the offending file.  If you are unable to remove it, after return and report you receive the error message.

• We get c:\windows\prefetch\taskmgr.exe-06144c13.pf when I open the Task Manager.

  Original title: c:\windows\prefetch\taskmgr.exe-06144c13.pf

  every time I hit him ctrl alt del, I get the Task Manager, but I get a pop up that says c:\windows\prefetch\taskmgr.exe-06144c13.pf

  I tried everything... y at - it software that I can buy or free it would set so I don't have to go into the registry or something... I'm not good or should I jjust stop worrying... I've had this for months... scanned with my AVG antivirus and malware malbytes and still have it

  I hope that you can send the answer to this

  Thank you

  Hello

  1. you did make changes on your computer before the show took place?

  Please follow these steps and check if they help.

  Step 1:

  I suggest that you download, install and run Microsoft Safety Scanner in safe mode and check if the problem persists (even if you have scanned with your security software).

  Step 2:

  Test the issue in a new user account.

• Why are there not file prefetch for Thunderbird in the \Windows\Prefetch folder?

  Why are there not file prefetch for Thunderbird in the Windows XP SP3 \Windows\Prefetch folder? I use Thunderbird 38.3.0.

  I deleted all the files in the \Windows\Prefetch folder and noticed that no files have been created it there for new programs began. I restarted the Task Scheduler service and the problem was solved.

• Ehshell.exe error with Windows XP Media Center Edition Version 2002, service pack 3

  Running Windows XP Media Center Edition Version 2002 with service pack 3.  I get the ehshell.exe error when I try to watch live TV.  It crashes, debug and I usually won't have to ctrl-alt-del to get anywhere.  Do not seem to have this problem before I added various updates etc, tv was fine before this date.

  I'm not particularly computer so nice easy steps please...!

  Thank you, Nicholas

  Ehshell.exe is a Windows system file that is used to run Microsoft Media Center. It is not a critical system file. However, the ehshell.exe file can become infected and cause errors trying to run certain programs. If the ehshell.exe is absent, it can also cause errors. Reinstall a clean copy of ehshell.exe with the Microsoft System Restore.

  1. • 1

       Click on the "Start" menu, then click on "programs". Scroll down and click on "Accessories," then "system tools." Click "system restore."

     • 2

       Click 'Next' in the window system restore for a list of points of restoration which has been archived.

     • 3

       Select a restore point created before the ehshell.exe file becomes corrupt or got deleted. If no restore point until this time is listed, click on "Show restore points more" to select the one that is before this date. Click 'Next' to choose which restore point.

     • 4

       Click 'Finish' to start the system restore. The computer will restart once the process is complete and the ehshell.exe file is reinstalled.

• I have windows xp I deleted rundll32.exe now my windows will not work please help.

  I have windows xp. I some how deleted rundll32.exe now my windows will not work or open. system restore not working anymore.

  http://www.computing.NET/answers/Windows-XP/deleted-rundll32exe/168958.html

• When you try to open a session message a userinit.exe (oxc0000005) on Windows Vista

  When you try to open a session in systems invites a userinit.exe (oxc0000005) on Windows Vista message and appears a black page, tried to work on safe mode and restart, but does not solve the problem and won't let me in in the operating system, please notify

  Startup Repair: frequently asked questions

  Here are answers to some common questions about startup repair.

  What is the Startup Repair?

  Startup Repair is a Windows Recovery tool that can fix certain problems, such as system files missing or damaged, that might prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  If you experience problems when you attempt to run the Startup Repair tool, or if your computer does not have the Startup Repair, your computer manufacturer can have customized or replaced the tool. See the documentation provided with your computer or go to the manufacturer's Web site.

  How to use Startup Repair?

  Startup Repair is located on the System Recovery Options menu, which is on the Windows installation disc. Startup Repair can also be installed on your drive hard if your computer has preinstalled recovery options. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  If you have a Windows installation disc:

  1. Insert the installation disc. If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer.

  2. Restart your computer.

     Click the Start button, click the arrow next to the button lock and then click on restart.

  3. Choose your language settings, and then click Next.

  4. Click on repair your computer.

  5. Select the operating system you want to repair, and then click Next.

  6. In the System Recovery Options menu, click Startup Repair.

  If your computer has preinstalled recovery options:

  1. Remove all floppy disks, CDs and DVDs from your computer and restart your computer.

     Click the Start button, click the arrow next to the button lock and then click on restart.

  2. Do one of the following:

     • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again.

     • If your computer has more than one operating system, use the arrow keys to select the operating system you want to repair, and then press and hold F8.

  3. In the Advanced Boot Options screen, use the arrow keys to highlight repair your computer and press ENTER.

  4. Select a keyboard layout, and then click Next.

  5. Select a user name and password, and then click OK.

  6. In the System Recovery Options menu, click Startup Repair.

  Are there problems Startup Repair cannot fix?

  Startup Repair cannot fix hardware failures or certain types of virus attacks. It is not a backup tool, so it cannot help you recover personal files, such as photos or documents. To help protect your computer, back up your system and your files regularly. For more information, search for "backup" in Help and Support.

  What happens if startup repair is unable to solve my problem?

  If the repairs are not successful, you will see a summary of the problem and links to contact for support information. Your computer manufacturer may include additional support information.

  See also

  • What to do if Windows does not start correctly
  • What is system restore?

  Also on the screen where you choose the Startup Repair, you can also choose command prompt. Type this (it's a single line)

  Tracking Add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v "Userinit" / t Reg_Sz/d "c:\windows\system32\userinit.exe".

• I connect my Canon camera, wiaacngr.exe opens a window asking me to select the program to start. But it offers only two options: M/S Office Word and scanner and camera wizard.

  original title:wiaacmgr.exe

  I found a lot on the Internet about wiaacngr.exe not opening not or refuses to recognize the camera.  My problem is almost the opposite!   Whenever I connect my Canon camera, by USB, my current laptop (Windows XP Pro SP3 of v5), wiaacngr.exe opens a window asking me to select the program to start.  But it offers only two options: M/S Office Word and scanner and camera assistant, neither of which I want to use.  If I close the window...  Not much, but it's a nuisance.  I would be happy if she has proposed to launch work stations.  I then click on the box "Make this every time" and will never see the window.  Otherwise, I'd be happy to remove the program completely.  Can someone tell me how to achieve one of these?  S ' Please!
  Jim

  Hello

  I suggest you to return the item and check if it helps:

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  See also:

  Change default programs using Set Program Access and computer defaults

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-default-programs-using-set-program-access-and-computer-defaults

• At the start of the laptop it shows the message: error code 0 x rstrui.exe/offline:c/windows 800750057.

  Original title: error code 0 x rstrui.exe/offline:c/windows 800750057.

  everytime I turn on my laptop that is running windows vista with what happens

  Rstrui.exe/offline:c/Windows

  I tried the vista cd and also the ordering page where can I get help please

  Hi rebeccawentworth,

  1. are you able to boot to the desktop?

  Follow these methods.

  Method 1: Start the computer in safe mode and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2: Start the computer in last know good configuration.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 3: Run the Startup Repair tool.

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Reference:http://support.microsoft.com/kb/934540

• Error: Please start the previous version of windows then click on the DVD-ROM and click on setup.exe to install windows during the upgrade to Windows 7

  Original title: Windows problem of dimming.
  Problem: impossible to up grade windows vista to windows 7
  Error message (roughly): start the previous version of windows then click on the DVD-ROM and click on setup.exe to install windows.
  Description: actually I have windows 7 genuine DVD which can start the installer to start. but I can't find anyway to install windows 7. I tried what windows error msg says.
  Help.
                                        

  Hi laadpiyush,

  1. which version of Windows Vista is installed on the system?

  2. which edition of Windows 7 you are trying to upgrade?

  3 - is 32-bit or 64-bit?

  Step 1:

  You can first check the upgrade paths to perform an Update Installation of Windows 7.

  Links:

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Step 2:

  Before upgrading to windows 7, you can try the following steps and start the upgrade installation.

  A. back up all important data on the system.

  Run the Upgrade Advisor

  See the link to download and run the Upgrade Advisor:

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Software c. Security uninstall and reinstall after upgrade Installation.

  D. sign off all external devices connected (except keyboard and mouse) and start the installation.

  For more information on the Upgrade Installation, see the links:

  Installation and reinstallation of Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/6719ae72-7187-45CD-80f7-55e66f3ec686

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Verkenner.exe: What is Verkenner.exe in the Windows Vista startup files?

  What is Verkenner.exe in the Windows Vista startup files? This is a Microsoft file that must run?

  If you know the location (or the search to find it) and then send it to:

  https://www.Microsoft.com/security/portal/submission/submit.aspx

  To find out if there is a threat or not.

  I guess it's part of demand which PC seller would system.

• Download CARDFILE. EXE running under windows 7/XP compatibility?

  Can someone help me get CARDFILE. EXE running under windows 7/XP compatibility?

  You can associate all the CRD files to cardfile.exe. Then make a shortcut to one of your records CRD and the shortcut will launch automatically cardfile.exe and open your clicked in CRD file.

  How do you associate files CRD with cardfile.exe? Easy. Right click on one of your CRD records, select Properties. On the general tab, there is an article entitled: "opens with: There is a 'CHANGE' button to the right which, when clicked, takes you to a list of applications from which you can choose. You can configure your system open the CRD files with any application of your choice, but the CRD files are from cardfile.exe, then this would be your best choice.

  I hope this helps.

• How copy/delete/replace an exe running in Windows?

  How copy/delete/replace an exe running in Windows?

  I want to live updated to update for my Windows application.

  Thank you

  You would need a separate program that starts to perform the update. The update would kill the other task, update, then re-launch.

• Cannot run exe files in Windows 7

  When trying to run an exe, error: Windows cannot drop 'xyz.exe '. Make sure you typed the name correctly and then try again. What should do?

  Hi Saeed,

  Were there any changes made on the computer before the show?

  This issue would have occurred as a result of a third-party program on a virus. Follow these methods to solve the problem:

  Method 1:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  See the article and try to follow the steps to fix the problem:

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505/en-us

  Method 2:

  I also suggest you use the Microsoft Safety Scanner to remove viruses, spyware and other malicious software:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Let us know the results. If you have other Windows problems, please ask your question and we will be happy to help you.

• Cannot open exe. files on windows 7 error exe is not a valid window 32 I 64 bit. What should I do

  I can't open any exe. on my windows 7.   Error message:... .is an application not valid windows 32. All the desktop icons have changed.  That's happened?  How can I fix it?

  Hello

  1. have you made changes on the computer before this problem?

  2 is the issue limited while accessing a particular application?

  This problem may occur because of viruses, files of the system parameters.

  Try the following and see if it helps.

  Method 1:

  Refer to the steps in the following Microsoft article.

   

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program: http://support.microsoft.com/kb/950505

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  Method 2:

  See the following Microsoft article and check.

  Changing the programs Windows uses by default: http://windows.microsoft.com/is-IS/windows7/Change-which-programs-Windows-uses-by-default

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.

   

  Method 3:

  I suggest you to run the Microsoft Safety Scanner and check if there is no virus.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.