KWorld 399U tuner TV USB "unable to determine the configuration of the TV signal" Windows 7 Media Center (64-bit)

Similar Questions

• Windows 7 Media Center (64-bit Home Premium) - No. Tuner error after each reboot

  Hello

  I have a tuner HD Homerun first (network connected) running with the latest firmware, and it works very well in Win7 Media Center for most of the time.

  Whenever I restart my computer, I get an error of "No Tuner found" when I try to watch live TV. I have the MC receiver and scheduler services running under the local system account. To resolve this error, I tried many things such as power cycle the tuner HD Homerun first, disconnect/reconnect the tuner of my network router, remove and reinsert the card cable into the tuner, but none of them seem to solve the problem of reliably all the time. While MC gives me this error, the QuickTV utility provided with the tuner can grant and show me the channels.

  Is there a permanent solution to this problem without having to resort to all this groping after every restart?

  Thanks in advance for any help and advice.

  Hi Aro,

  You have reached the end user Microsoft support. The question that you are running in is better suited to the following forum:

  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/default.aspx

  Please report if you need additional assistance.

• Unable to determine the current location by this time El Capitan

  Hello.

  Recently, I have this problem with my Macbook pro. I turn on location services, as you can see...

  ... but my computer is unable to determine the current location in the date and time. Cards and find my mac are not also work more.

  

  Currently I have version 10.11.5 of El Capitan. It happened from one day to another, I don't update the software or anything like that.

  Thank you

  Edgar Lopes

  Turn on Wi - Fi for the information about the location.

• I'm unable to determine the correct HP Quick Web access to fast Internet security key

  I am unable to determine the correct HP Quick Web access to fast Internet security key?

  Hello

  You need to contact HP support, their documentation online and ask in their forums than
  is not a problem of Windows or Microsoft.

  These should help:

  Install and use the Applications HP QuickWeb
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02043846&cc=us&LC=en&DLC=en

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• OIM 11 g R2-code Client - JRF is unable to determine the current application

  Hello
  
  I'm asking a resource via an API by using the client program, I face below question when I run the client program:
  November 17, 2012 20:56:35 < clinit > oracle.iam.platform.context.ContextManager
  GRAVE: IAM-0030002
  oracle.jrf.UnknownPlatformException: JRF is unable to determine the current application server platform.
  at oracle.jrf.ServerPlatformSupportFactory.getInstance(ServerPlatformSupportFactory.java:79)
  to oracle.iam.platform.context.ContextManager. < clinit > (ContextManager.java:77)
  at oracle.iam.platformservice.api.ClientLoginSessionServiceDelegate.loginSessionCreated (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  to Thor.API.Base.SecurityInvocationHandler$ 1.run(SecurityInvocationHandler.java:68)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.security.Security.runAs(Security.java:41)
  at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs (weblogicLoginSession.java:52)
  at Thor.API.Base.SecurityInvocationHandler.invoke (SecurityInvocationHandler.java:79)
  to $Proxy1.loginSessionCreated (Unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at oracle.iam.platform.OIMClient.loginSessionCreated(OIMClient.java:291)
  at oracle.iam.platform.OIMClient.login(OIMClient.java:215)
  at oracle.iam.platform.OIMClient.login(OIMClient.java:197)
  to comp.iam.oim.client.Client. < init > (Client.java:37)
  to comp.iam.oim.client.ClientRequest. < init > (ClientRequest.java:24)
  to comp.iam.oim.client.RequestResourceCreate. < init > (RequestResourceCreate.java:44)
  at comp.iam.oim.client.RequestResourceCreate.main(RequestResourceCreate.java:57)
  Exception in thread "main" oracle.iam.platform.utils.NoSuchServiceException: java.lang.reflect.InvocationTargetException
  at oracle.iam.platform.OIMClient.getServiceDelegate(OIMClient.java:279)
  at oracle.iam.platform.OIMClient.getService(OIMClient.java:256)
  to comp.iam.oim.client.ClientRequest. < init > (ClientRequest.java:25)
  to compiam.oim.client.RequestResourceCreate. < init > (RequestResourceCreate.java:44)
  at comp.iam.oim.client.RequestResourceCreate.main(RequestResourceCreate.java:57)
  Caused by: java.lang.reflect.InvocationTargetException
  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
  at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
  at oracle.iam.platform.OIMClient.getServiceDelegate(OIMClient.java:275)
  ... 4 more
  Caused by: java.lang.NoClassDefFoundError: org/eclipse/persistence/indirection/ValueHolderInterface
  at java.lang.Class.forName0 (Native Method)
  at java.lang.Class.forName(Class.java:169)
  to $Proxy4. < clinit >(Unknown Source)
  at sun.reflect.GeneratedSerializationConstructorAccessor23.newInstance (unknown Source)
  at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
  at java.io.ObjectStreamClass.newInstance(ObjectStreamClass.java:924)
  at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1736)
  at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1328)
  at java.io.ObjectInputStream.readObject(ObjectInputStream.java:350)
  at weblogic.utils.io.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:208)
  at weblogic.rjvm.MsgAbbrevInputStream.readObject(MsgAbbrevInputStream.java:599)
  at weblogic.utils.io.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:204)
  at weblogic.rmi.internal.ObjectIO.readObject(ObjectIO.java:62)
  at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:243)
  at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
  at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
  at weblogic.jndi.internal.ServerNamingNode_1036_WLStub.lookup (unknown Source)
  at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:424)
  at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:412)
  at javax.naming.InitialContext.lookup(InitialContext.java:392)
  to org.springframework.jndi.JndiTemplate$ 1.doInContext(JndiTemplate.java:132)
  at org.springframework.jndi.JndiTemplate.execute(JndiTemplate.java:88)
  at org.springframework.jndi.JndiTemplate.lookup(JndiTemplate.java:130)
  at org.springframework.jndi.JndiTemplate.lookup(JndiTemplate.java:155)
  to oracle.iam.request.api.RequestServiceDelegate. < init >(Unknown Source)
  ... 9 more
  Caused by: java.lang.ClassNotFoundException: org.eclipse.persistence.indirection.ValueHolderInterface
  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
  ... 34 more
  Process has finished with exit code 1.
  
  
  
  Through a few forum with that said:
  https://CN.forums.Oracle.com/forums/thread.jspa?threadID=2432434
  
  But all of the code is not running (I can check that a few sys out is not getting printed) and that's why the request is not triggered in my case.
  
  Any assistance on this please.
  
  Thank you

  Make sure that you have all the pots in the class path: -.

  $Oracle_IDM1/server/clent/oimclient.zip, you get 4 pots: -.

  oimclient.jar
  Spring.jar
  EclipseLink.jar
  Common - logging.jar

  In addition, you have already wlfullclient.jar and jrf - api .jar

  You must have already established the system property: -DAPPSERVER_TYPE = wls

  Make sure you visit the following link: -.

  http://docs.Oracle.com/CD/E27559_01/dev.1112/e27150/APIs.htm#BCFCDJGJ

  Also, are you able to ping and telnet your IOM hostname from your Windows machine?

  Problem may be firewall etc...

  You said you use Console Design? From where? From your Windows machine or directly from the server UNIX using XMing or VNC etc?

  If you UNIX server, copy the folder designconsole on your Windows machine AND configure things in the xlclient.cmd...

  If you have found ways to NoSuchServiceException, it's the connectivity problem...

  In the etc/hosts file on your Windows machine, add the IP address of the machine of the IOM...

  This will definitely work...

  In addition, .bash_profile, I set the following environment variables... See if you're missing something: -.

  JAVA_HOME=/usr/java/JDK1.6.0_21
  MIDDLEWARE_HOME = / home/oracle/Oracle/Middleware
  WL_HOME = $MIDDLEWARE_HOME/wlserver_10.3
  ANT_HOME = $MIDDLEWARE_HOME/modules/org. Apache.ant_1.7.1
  $PATH = path: $HOME/bin: $JAVA_HOME/bin: $ANT_HOME/bin

• 64-bit Windows 7 Media Center does not detect not tv tuner

  Hello

  Windows Media Center is not able to detect my usb hybrid tv tuner in trying to set up live TV. When you try to solve any problems are detected, I downloaded the latest drivers and install and the device is listed as working properly in Device Manager.

  It is a kworld atsc usb hybrid tv stick ub445-u

  I am at a loss on what to do because there are several product reviews that say the tv tuner works very well with windows 7 with no hiccups...

  Any help or steps would be appreciated!

  Update

  Everything uninstalled and reinstalled media library but her has not helped either

  KWorld hybrid TV Stick UB445-U USB 2.0 is a Windows 7 Media Center compatible tv tuner card, and there is no need to install any third-party application.

  You can create a different user account with admin rights to check the issue.

  http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=KWorld%20UB445-U%20Hybrid%20Tuner%20Stick%20USB%20TV%20Tuner%20Card&v=KWorld&uid=UB445-U&l=en-US&pf=1&pi=9&c=TV%20Devices&sc=TV%20Tuners&os=64-bit

• Qosmio G50 - cannot install the FM Tuner in Windows Vista Media Center?

  Can someone help me get the most out of Windows Vista media center with my new Qosmio G50.

  There is a tuner inside this laptop and I have the antenna and its plugged in. The drivers all seem to be installed but WMC tells me that I don't have the hardware to run FM stations and I can't make it work. Also, I can't record library but although I can't watch TV no problem at all.

  Someone out there have the answer?

  Hello

  Are you sure that your equipped G50 FM tuner to 100%?

  As I know a few models of G50 has been equipped with a tuner TV with antenna TV port that allows to connect a coaxial cable to this port to watch a TV program and then save.
  But as I said earlier, this feature is not included with all models of G50.

  Sorry, but I didn't find any info regarding the FM tuner.

• Unable to install the update to windows? 0x800A01AE & 0 x 080070570

  Unable to install the update to windows? cordially 0x800A01AE & 0 x 080070570, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

  http://support.Microsoft.com/kb/910359

  Manual procedure to solve the "0x800A01AE" or "0 x 080070570" error messages to manually resolve this problem, follow these steps:

  1. Stop the Background Intelligent Transfer Service and the automatic updates service. To do this, follow these steps:
     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands and press ENTER after each command:
        net stop wuauserv
        net stop bits
        output
  2. Rename the Catroot2 folder.

     Note Do not follow this step if you are using Microsoft Windows 2000.

     To rename the Catroot2 folder, follow these steps:

     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands and press ENTER after each command:
        
        net stop cryptsvc
        Ren %systemroot%\System32\Catroot2 oldcatroot2
        net start cryptsvc
        output

     Important Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

  3. Rename the folder "C:\Windows\SoftwareDistribution":
     1. Click Start, click run, type %any, and then click OK.
     2. Right-click the C:\Windows\SoftwareDistribution folder, and then click Rename.
     3. Type SoftwareDistribution.old, and then press ENTER to rename this folder.
  4. Save the files used by Windows Update and Microsoft Update. To do this, follow these steps:
     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands, press ENTER after each command, and then click OK every time that you receive a verification message:
        regsvr32 c:\windows\system32\wuapi.dll
        regsvr32 wuaueng1.dll
        regsvr32 c:\windows\system32\wuaueng.dll
        regsvr32 c:\windows\system32\dllcache\wucltui.dll
        regsvr32 wups2.dll
        regsvr32 c:\windows\system32\wups.dll
        regsvr32 wuweb.dll
  5. Start the service of automatic updates, Background Intelligent Transfer and the event log service. To do this, follow these steps:
     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands and press ENTER after each command:
        net start bits
        net start wuauserv
        net start Eventlog
        output

        Solved...!

  Best regards, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

• Unable to get the upgrade to Windows 7 purchased to start

  I bought an upgrade to a provider. I have acquired a product key. I invoke Windows Anytime Upgrade according to the directions and the only option is to upgrade to Vista. Then I went to the Microsoft page to buy the product. I have Vista 64-bit with all updates installed on my Toshibe Satellite computer. I ran the Upgrade Advisor and everything was satisfactory.

  Unable to get the upgrade to Windows 7 purchased to start

  I call Windows Anytime Upgrade according to the guidelines

  I have Vista 64-bit

  Windows 7 anytime upgrade: you have Vista or XP currently installed?

  If the product you have Windows 7 'Anytime Upgrade' does not allow to move from XP/Vista to Windows 7. You can buy the product at retail of Windows 7 Upgrade not the ' Anytime Upgrade '.

  Windows 7 'Anytime Upgrade' is for moving from one version of Windows 7 to a higher version, such as Windows 7 Home Premium to Windows 7 Professional.

  You can buy Windows 7 here:

  http://www.microsoftstore.com/store/msstore/cat/CategoryID.44066700

  How to upgrade:

  If you have Vista:

  Update: http://windows.microsoft.com/en-us/windows7/help/upgrading-from-windows-vista-to-windows-7

  Custom installation: http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-vista-to-windows-7-custom

• Windows 7 - Media Center - TV Pinnacle USB Mini Pro (80th) adapter does not show clear Option of Signal TV QAM.

  Hi all
  I have Windows 7 Ultimate 64 bit and a USB Pinnacle USB TV adapter (80th).  Which works fine with the software provided by Pinnacle, (TV Center Pro) using Clear QAM. However, I want to use the adapter USB TV with Windows 7 Media Center.  When I go in the options of signal TV of WMC, it shows Clear QAM as an option.  Can someone tell me please how to display the QAM option?  And why is it hidden initially?

  Bad bad Microsoft!  Shame on you for something!

  Thank you
  Jay

  Hi all
  I finally got that it works, and that a single push.

  First of all, I uninstalled all drivers for my TV card in Device Manager. I had to do this several times, as he kept drivers already installed conclusion, but finally there lack of pilots.

  -Reboot
  -J' pressed F8 during boot and selected "disable driver signing" at startup.
  -Once Windows 7 has been started, I installed the drivers Beta 64-bit listed above.
  (I didn't understand how automatic default to F8 and 'Disable driver signing', always looking at this information, my plan is not to restart very often at the moment.)
  -Then, I scanned for TV stations, technnicaly my adapter showed as two adapters, said the Media Center window to search for the two adapters and found all my ClearQAM channels.

  I have installation check, I'll see how it works, but so far, Windows Media Center looks really sweet.

  I hope this helps others, I know that I spent many hours to find it.

  Jay

• Unable to determine the returned PID of launch.

  http://supportforums.BlackBerry.com/T5/native-development/4-language-application/TD-p/2719677

  After I implemented the lanbguage part, whenever I try to run my ap on device I get this error

  my file descriptor-bar

  
  
  http://www.qnx.com/schemas/application/1.0">
  
  
  
      
      com.netvariant.AlKhaliji
  
      
      
         Al Khaliji
         Al Khaliji
      
  
      
      1.0.0
      ar
  
      
      1
  
      
      
  
      
      
         AL Khaliji Mobile banking Application
         AL Khaliji Mobile banking Application
      
  
      
      
  
      
      Netvariant
      
         icon.png
         
            icon.png
         
      
      
         armle-v7
         AlKhaliji
      
      
         Qnx/Cascades
         armle-v7
         AlKhaliji.so
      
      
         armle-v7
         AlKhaliji
      
      
         x86
         AlKhaliji
      
  
      
      
  
      
          true
          none
          false
      
  
      
  
      assets
  
      
      
          
      
      icon.png
  
      
      run_native
      
  
  
  

  SOLVED

  http://208.74.204.192/T5/native-development/unable-to-determine-returned-PID-from-launch-when-runnin...

  But it looks like I found the solution!
  Just go to "Run" > "Run Configurations...". " on the tab 'Upload' in the 'Deployment' section select 'Install the app bar file' , then 'Apply' and 'Run'
  Do the same for the Configurations Debug...
  After that, I can running or debugging my application!

• HP ENVY j073ca: unable to determine the version of HDMI output on my laptop HP envy. It is 1.3 or 1.4 bis?

  Hi I tried to determine the version of my laptop HDMI port HP ENVY 17 j073ca however I have found no info on this subject.  Could anyone help shed any light on this?  Thank you!

  Hello

  Many TV can make upscan which means that they accept the entry at lower resolution and then fill the entire screen. I don't know your TV/monitor, but normally it can do the work in this way.

  Update: all modern televisions must have a lot of options for entry reports, you can watch old movies (ratio 4:3) on the use of 16:9 zoom function.

  Kind regards.

• Linksys wireless-g usb network adapter unable to detect the router using windows XP desktop PC

  I've changed in broadband Orange yesterday and since then my adapter is unable to find the network (it was working fine with TalkTalk until I changed).

  He managed to find a couple of other networks that are nearby but nothing else.

  I have a laptop (windows 7) who finds the router Orange immediately. I tested the adapter with the laptop and it finds the router Orange plus about 10 other nearby networks.

  I rang Orange who crossed their tests and not found any problems. I uninstalled and reinstalled the adapter on the windows XP desktop, but I get the same result.

  Can anyone help?

  Thank you

  Thanks for the reply.

  I got it finally work last night after a day of cleaning up!

  Even if the network does not have to be detected in the available wireless networks "choose" I tried the "New Connection Wizard" and entered all the details that came with the router. The adapter found the Orange router but nothing else in the region.

  For now, it works but there is a problem somewhere, because I don't see any networks, I can see on my laptop.

  See you soon.

• Upgrade Windows 7 to Windows 8 Pro: Setup is unable to determine the language of the INTERFACE

  I can't upgrade Windows 7 to Windows 8 Pro, I got this message > the installation program fails to determine the language of the INTERFACE.

  Looks like a corrupted download.

  Try to rename or delete the Web installation folder and try again.

  C:\Users\\AppData\Local\Microsoft\Web install

  Please let us know if you are able to continue after trying the above

• Unable to determine the correct Content Type or length when connecting via HTTP

  Right now I'm developing a streaming audio application.

  And I have the resources and the sample apps u.

  Then when I open a connection and I print the content type of the page that contains the audio file

  It shows a text/plain type.

  The length is also displayed but bad as: 24.

  So basically it is not consider as an audio file.

  Next when I try a random url like http://www.google.com

  The length is always-1. (impossible to determine the length)

  The content type is correct.

  And when I pass some invalid/non-existent url, it gives a number at random. like 29 or 39.

  Suggestions/ideas?

  Thank you

  http 413 error. Take a look at this thread:

  http://supportforums.BlackBerry.com/T5/Java-development/increase-MDS-CS-limit-on-http-download-size/...