L10 start problem - "SHDOCVW.dll is not found.

When I start my laptop there is a message 'SHDOCVW.dll is not found' instead of icons on the desktop and I can't use my laptop more. Please help me cause I'm new user only. Thank you to.

Hello

Check it please this page http://www.pcfixtool.com/dll-errors/2339/2/required-shdocvw-not-found.html

I hope this will help you understand what is happening. You can try to start the machine in safe mode by pressing F6, while the unit will start and try to install a new copy of the file manually. Check out this page http://www.ascentive.com/support/new/support_dll.phtml?dllname=shdocvw.dll

You will find a brief explanation how to do this.

Good luck!

Tags: Toshiba

Similar Questions

  • Error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem.

    Original title: error explorer.exe, Normaliz.dll is missing please help me about the issue.

    Hello

    I get the error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem"Please help me!

    Well - so much for the expertise of committed Microsoft Support Engineer 'experts', but no answer to what I expected.

    See how it works for you:

    If you see a message like this:

    Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

    It is in the case Log:

    Event type: Information
    Event source: Application Popup
    Event category: no
    Event ID: 26
    Description:

    Application popup: Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

    Start explorer.exe, but the normaliz.dll file.  If explorer.exe is not able to run, you will not be able to do much with your system until the replacement of normaliz.dll.

    You can click OK for errors and finished up in the Task Manager where you can try to fix it.  The message can keep popping up from time to time, while you're fixing it, so just click OK to close the message.

    If normaliz.dll is missing, you can copy it from a working system to the system afflicted with the same version of XP and Internet Explorer.

    You will get a good copy and put it on a floppy disk, thumb drive etc and copy it to your system plagued by using Manager tasks.

    The normaliz.dll file must be located in the c:\windows\system32 folder and therefore is not a Windows file protected, making the Microsoft Support Engineer 'experts' suggest running sfc/scannow, which is just another one of their prosecution of wild goose that will not work, he'll never work and it will only waste your time (and they don't tell you how to run either - if explorer.exe does not start).

    Then engaged Microsoft Support Engineer 'experts' will offer to you develop a copy of the file from the XP installation CD you probably haven't, but it is also not on your XP installation CD, and you will have the same problem try their suggestions to 'try' to start in any any Mode without failure, so this will not help you.  These "experts" seem to think that the Safe Mode boot or boot will replace magically missing files, but it doesn't.

    You also will be able to properly run a browser on the system afflicted to go on Internet download one.

    There is a large computer security risk in the normaliz.dll from some website download.  The best idea is to get a copy of normaliz.dll from another computer that has the same version of XP and IE and replace it from a USB device (which you can access from the Manager tasks), or using a system that works, you can download one of my SkyDrive.

    You can still use the Task Manager to run the system restore and bring it back, but I've never tried and never use SR in all cases.

    If you have recently done a bunch of Microsoft updates, you may have also gotten IE8 so maybe that something was wrong here although the normaliz.dll is the same for each version.

    When you see the error, you can click beyond it and eventually arrived at your screen background image where you can press CTRL-ALT-DEL to start Task Manager. TM, you can click file, new task, Browse and edit the menu drop-down "Files of type" to all files that you can see all the files in folders.

    Go to c:\windows\system32 to see if normaliz.dll is really missing. If the error appears again while browsing, just click OK to get past it.  The explorer.exe tries to run and cannot until the missing file is replaced.

    If it's the only thing missing, you can get one from a working system of the same type as yours, copy on a Flash DRIVE or a floppy disk and always using TM, to browse, copy and paste it where it should be or you can download one of my SkyDrive.

    TM, you can still access your thumb or any other medium the same disk by navigating, copy, paste, etc very well all work.  You use TM to navigate to your thumb or floppy disk, copy the normaliz.dll good and then paste it in the c:\windows\system32 folder, where it is supposed to be.

    If things get worse, just return to TM and remove the file back where you were in first place and continue troubleshooting.

    Using a system that works, you can also download a copy of the file from my SkyDrive and put it on a floppy or USB thumbdrive and networks diskettes for the distressed system.  Sandalenet means wear you the system afflicted by hand.

    I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

    You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

    c:\Windows\System32

    Here is the link to my SkyDrive and you can get the file you need here:

    https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

    When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

    When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

    You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called normaliz when the name of the file should really be called normaliz.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

    You then put the downloaded files in the correct folders on your system.

    That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

  • This application has failed to start because uncdms.dll was not found. Reinstalling the application may fix this problem. How can I fix it? Kathy

    This application has failed to start because uncdms.dll was not found.  Reinstalling the application may fix this problem.  How can I fix it?  Kathy

    The above explains the problem, my problem is I don't know what it's etymology comes.  Is this windows software, or software from Microsoft or both?  What is the name of the Application?  Help, please!  Thank you, Kathy

    Hi Kathy,

    1 have you made changes to your computer recently?

    2. When you get this error message?

    The uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

    I suggest you to follow the steps and check if it helps.

    Method 1: Uninstall and reinstall Windows Desktop Search

    The uncdms.dll file is installed on your PC when you download the Windows Desktop Search application. Problems with this application's files can cause a missing uncdms.dll of error appears on your system.

    To uninstall the Windows Desktop Search from your computer, you must complete the following two tasks:

    Step 1: Remove Windows Desktop Search from the boot sequence

    To do this, follow the steps below:

    a. click on the start menu, click Run.

    (b) in the Open box, type msconfig and press ENTER.

    c. in the System Configuration Utility dialog box, click the Startup tab.

    d. search and clear the check box for any option that is related to Windows Desktop Search or uncdms.dll.

    e. restart your computer.

    Step 2: Uninstall Windows Desktop Search applications

    To uninstall the Windows Desktop Search using the Add / Remove Programs, perform the following steps:

    a. click the start menu and select Control Panel utility.

    b. double-click the icon Add / Remove programs.

    c. in the Add / Remove Programs, locate and select the Windows Desktop Search.

    d. press the button Delete.

    e. restart your computer.

    Method 2: I suggest do you an online scan and check.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  • It's on my screen and I don't know how to fix it... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. » __

    I have this message that appears constantly, and the only way to minimize it is to go to Task Manager. Here's what the message says... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. »

    How to re-install the AegisE5.dll?

    I have this message that appears constantly, and the only way to minimize it is to go to Task Manager. Here's what the message says... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. »

    How to re-install the AegisE5.dll?

    AegisE5.dll is linked to a network authentication system.  Because it is almost certainly only used with enterprise networks, you should communicate with your company, IT supports for assistance.

    If your computer does NOT connect to a corporate network:

    • What changes have been made recently to your network hardware/software?
    • You have a home network? Wired or wireless?
    • How is your computer connected to the Internet?
  • I get this error at startup: this application has failed to start because uncdms.dll was not found. Reinstalling the application may fix the problem

    I recently did a full recovery on my pc.  I'm running on Windows XP Pro.  Since the resumption, I get this error at startup: this application has failed to start because uncdms.dll was not found.  Reinstalling the application may fix the problem.  I don't find Windows Search in my Add/Remove programs.  How can I uninstall it?

    Hello
    The uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

    Methods of resolution:
     
    I suggest you to download windows desktop search for additional and install.

     
  • message error in yahoo messenger installation (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem)

    I want to install yahoo messenger on my computer while the installation is the process this error message will appear (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem). What d3d9.dll means? I try to re-intall this applications but same error message appear. Thank you! Any help or advice is appreciated.

    Hi vlademer,

    D3D9.dll is Direct 3D 9 runtime and is located in the C:\Windows\System32 directory.

    Follow these methods.

    Method 1: Follow the steps in the article.

    Problems installing and uninstalling programs on Windows computers

    http://support.Microsoft.com/kb/2438651

    Method 2: Scan the file system (CFS) auditor to repair corrupted files.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

  • "mwlDaemon.exe - Unable to locate component. Application has failed to start because sysenv.dll was not found. Reinstalling may correct the problem.

    Vista message mwlDaemon.exe error
    At the start of Vista, I get the message "mwlDaemon.exe. - unable to locate component Application has failed to start because sysenv.dll was not found. Reinstalling may correct the problem"Question is how should I do this? Most programs work OK, but I think the problem might be preventing a backup is made.

    Hi Thegardener,

    ·         How long have you been faced with this problem?

    ·         You did changes to the computer before the show?

    Follow the steps below for a possible solution:

    Method 1: I suggest you perform the clean boot and check.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

     

    Method 2: If the method above is not enough, you can try to uninstall and reinstall the application.

    You can see the article for more information about the uninstall of a program.

    Uninstall or change a program

    http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

    Hope this information helps.

  • Tecra M9 - TPSMain.exe cannot start because CpePerf.dll was not found

    Hi and help,

    searched the Web and found other discussions of the forum with similar questions.
    Tried all suggestions, nothing worked. I'm not very good on the computer but you can find my way. In any case...

    After connection messge pop messages - up in succession, similar to: TPSMain.exe cannot start because CpePerf.dll was not found then: TPSoddctl.exe cannot start because CpuPerf.dll not found

    Computer works very well but Power Saver start is not automatic and can't select it from the Panel... "" Toshiba power saver does not work. "
    so select the power options... "could not start because the CpuPerf.dll is not running.
    Did all the research on the net and followed all the tips... i.e. unistall saving in safe mode, uninstall toshiba common utility can uninstall fatal error 0x7e

    Then download Ccleaner, inspections, uninstall with Ccleaner same fatal error.
    In support of Toshiba and tried to install Power Saver... same problem will not install.

    Thus help help help if possible.
    Computer works well but popping up messages are annoying and I'd love to sleep to extend battery.

    Tried the system restore, even though I doubt that it affects the files... Another problem "cannot complete system restore"... tried this several times and cannot restore the system either... What is happening?

    any help please
    Tim

    Hello

    I think you can solve this problem, recover the laptop.
    But that would mean that the whole HARD disk should be formatted and would be installed everything again, I put t know if this is an option for you

    It turns out that something will not with the Toshiba Power Saver installed and, consequently, the popup message.
    Usually new installation of GST should help. But it was not and I m wondering why

    Maybe this is s question really an OS since system restore help (to the previous state) didn t

    He s strange question right now I can suggest only a new recovery

  • Error: mmc.exe - Unable to locate component. This application has failed to start because apphelp.dll was not found.

    Original title: this application has failed to start because apphelp.dll was not found.

    A window titled "mmc.exe - Unable to locate component" in the title bar, which includes the message:

    "This application has failed to start because apphelp.dll was not found.  Reinstalling the application may fix this problem. »

    that appears when you access many of the 'administration tools' in the start menu.  e.g. component, computer, event viewer Management Services, etc.

    I'm afraid I accidentally deleted apphelp.dll when cleaning on other files.  I found copies of apphelp.dll in following two tracks.

    AppHelp.dll C:\WINDOWS\$NtServicePackUninstall$ 124KO Extension Application 09/08/2004

    AppHelp.dll C:\WINDOWS\ServicePackFiles\i386 123KO Application Extension 04/13/2008

    I tried Recuva, but he could not find the file.

    How to re - install a such apphelp.dll suggested by the pop - up error message window?

    Thank you

    I thought it would be something that began with "A".

    For low overhead and free, think of Microsoft Security Essentials (MSE).

    MSE and a regularly good scan with the definitions updates using MBAM and SAS (from post above) should keep you in good shape according to your Internet habits.

  • Error "this application has failed to start because iertutil.dll was not found" on startup

    original title: iertutil.dll problem

    I have exactly the same problem as helpneeded1000. The message box that says: "this application has failed to start because iertutil.dll was not found. Re-install the program may fix this problem. "Get right after you start windows xp. It is constantly after I have trying to login or close. Shortcut buttons, start menu, everything on my desktop disappeared. I tried to open the box of the Task Manager by pressing Ctrl-alt-delete, but this is as far as going to my knowledge. Can someone help me solve the problem please? did askme to download any kind of things because I don't have any access at all.

    Thank you.

    Quimbee

    Hello quimbee,.

    In addition to the response of Naman R, please consult the link below if you are still having problems.  Please follow the steps to Joselbarra and let us know the status.

    When you start windows xp pro starts then stops and says this application has failed because iertutil.dll was not found

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/system-has-failed-because-iertutildll-was-not/6dd913ba-cc0f-4828-a55a-477771d25b66

    Thank you

  • "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

    Original title: SiSUSBrg.exe

    "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

    Hope that this is not a virus!  Help?

    Hello

    I suggest you to follow these steps and check if that helps:

    Method 1:
    Start the computer in safe mode and check if the same problem occurs:
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

    Method 2:
    Try to perform the clean boot and check if it helps:
    http://support.Microsoft.com/kb/310353
    NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

    It will be useful.

  • Cannot open Windows mail, WinMail.exe - Unable to locate component, could not start because SHELD32.dll was not found

    Original title: my Windows Mail program and shortened, will not open.

    My Windows Mail program and shortened, will not open.  I get a box of popup titled WinMail.exe - impossible to component locat.  Inside it is said he "could not start because SHELD32.dll was not found."  Reinstalling the application may fix this problem. "When I click OK another box opens with"MSOE.dll is not found. »

    Hello

    I moved your post to the forum Windows Vista under programs category. They are experts in the field of your request and would be in a better position to answer your concerns.

    Thank you.

  • "This application has failed to start because iertutil.dll was not found.

    Whenever I try to open any application that is installed on my laptop, a message appears saying that "this application has failed to start because iertutil.dll was not found. He said little other than those.

    This started after I tried to solve another problem on my laptop. Last night, I installed updates, before turning off my computer. This morning, my computer freezes completely after I turned it on. Finally, he stopped long enough to get a screen with the message of freezing "configuration of updates: stage 3 0f 3-0% complete, etc.» I tried to work around this problem by using a solution when searching online, I found the problem. The solution had me select 'repair your computer' when the laptop has been turned on. He had me open a command prompt and rename a file called pending.xml. Thereafter, I could connect fine, but then the problem iertutil.ll is born.

    Almost everywhere I looked, I found only users of Windows XP with this problem and most of th proposed solutions require windows Explorer to work (which is between th many applications on my computer which is adamently refused to work). If you can help me, so I canassure you it will be greatly appreciated.

    Hello

    ·        What are the updates that you tried to install on the system?

    Let us know the number of KB updates. Follow the steps mentioned in the link given below to check updates are installed on the system.

    Install Windows updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Iertutil.dll errors are caused by situations that lead to the removal or corruption of the iertutil DLL file.

    Apart from this, follow the steps mentioned below.

     

    Method 1:

    I suggest make a SFC (System File Checker) scan on the system and check if the problem is resolved.

    a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

    b. click on continue or provide administrator credentials if prompted.

    c. in the type in the following command prompt window and press ENTER:

    d. sfc/scannow

    e. you should see the following message on the screen:

    § Begin the analysis of the system. This process will take time.

    § Beginning verification phase of system scan.

    f. % verification complete.

    g. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

    For more information, see the article mentioned below.

    http://support.Microsoft.com/kb/929833

    Method 2:

    I suggest you do a clean boot and see if the problem still occurs in clean boot mode.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: when you have completed the installation, follow step 7 to start the computer in normal startup.

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • error"this application has failed to start because GD132.dll was not found.

    If I try to open all the files or download anything I get this message: could not locate component this application could not start because GD132.dll was not found, reinstalling the application may fix the problem. Ive done a scan and have no viruses, but I can't open anything my system restore does not work just intern it

    Hello mwbug,

    Would you like to take a look at this link: http://pcsupport.about.com/od/findbyerrormessage/a/gdi32-dll-not-found-missing-error.htm

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

  • Creed Assassin's for PC 2 - has failed to start because d3dx9_42.dll was not found.

    Just bought Assassins Creed 2 for PC, after installation, application could not start because d3dx9_42.dll was not found. This should have on the game disc or already on my computer. I am running windows vista and x 11 direct. Help, please!

    Try this. found the site of anoter.

    Resolution important note: not download the DLL d3dx9_42.dll individually from any "DLL download site. There are a number of excellent reasons that download dll of these sites is never a good idea.

    Note: If you have already downloaded d3dx9_42.dll from one of these sites to download DLL, remove it from everywhere where put you it and continue with the following steps.

    1. Restart your computer if you have not already done.

      D3dx9_42.dll error could be a stroke of luck and a simple restart could clear up completely.

    2. Install the latest version of Microsoft DirectX. Chances are, the upgrade to the latest version of DirectX will fix the d3dx9_42.dll not found error.

      Note: Microsoft frequently publishes updates of DirectX without updating the version number or letter, so don't forget to install the latest version even if your version is technically identical.

      Note: The same installation of DirectX program works with all versions of Windows including Windows 7, Windows Vista, Windows XP and more. It will replace any missing file from DirectX 11, DirectX 9 or DirectX 10.

    3. Assuming that the latest version of Microsoft DirectX does not correct the d3dx9_42.dll error you receive, you are looking for a DirectX installer on your game or application DVD or CD. Usually, if a game or other program uses DirectX, software developers includes a copy of DirectX on the installation disc.

      Sometimes, but not often, the DirectX version, included on the disc is a better fit for the program than the last version available online.

    4. Uninstall the game or software program and then reinstall it again. Something could have happened to the files in the program work with d3dx9_42.dll and a reinstall might do the trick.
    5. Restore the file since the last software package DirectX d3dx9_42.dll. If the troubleshooting steps above have not worked to resolve your d3dx9_42.dll error, try to extract the d3dx9_42.dll individually from the downloadable package of DirectX.
    6. Update the drivers for your video card. Is it is not the most common way, in certain situations, updating the drivers for the video card in your computer may correct this problem of DirectX.

    MCP. MCDST. LVL 80

Maybe you are looking for

  • Satellite M30 - after replacing drive DVD 0203: failure IDE #2 appears

    Hello I replaced the DVD unit on my Satellite M30 as it was broken. I installed the same unit (UJ - 820B), but now at startup, I get the error message 0203:Failure IDE #2 with options to continue starting in the operating system or run the Setup prog

  • Satellite A200 - 1 MB-high temperature

    * Hi, *. I have Toshiba Satellite A200 and I have never cleaned the dust out of the computer case. CPU temperature sometimes goes very high, even at 85 C. But it usually ranges from 50 to 65 C. Is - this temperature is too high? What are the risks to

  • HP 3630: looking for a printer

    Says 'connected' to HP 3630 view Samsung tablet, I try to print the Wi - Fi direct (or nothing), it continues the search for printer and nothing happens. ????

  • Apply the custom scale and add Boolean if I can connect on demand

    Hello I have a problem adding my custom code scale. I have a pressure sensor that works in the range of 4-20mA. So, I made a custom scale as you can see in the code and tried to connect the name of custom on the DAQ.mx scale. Which doesn't seem to wo

  • Windows error 0 photo gallery x 80070052

    Windows Help does not recognize the product code of my computer so this request.