L20 - 264 takes about 10 minutes to stop

Hi my L20 - 264 is very very slow when stopping down, standing or hibenating.
Select start/turn off computer he can takes about 5 minutes to bring up the options bar. Of and then selecting turn off for example then pick up another 5 minutes before the laptop actually powers.
There is no software hogging the system because I've been surfing or play media files.
Is due to the fact that it has only 192 MB of ram, because I thought the upgrade anyway. Or I am barking the wrong tree?

See you soon

Hello

I agree with Jonathan

A little more RAM can be very good, and it can make your device faster and more flexible. I recommend you to check all active running process. Generally, many of them is absolutely useless, but they can slow down the system quickly especially if the device does not have a lot of RAM.

I recommend clean up the operating system, use the Defragmenter tool and check applications that start with Windows. Many of them may be disabled. Enforcement antivir may also slow the operating system currently running. Check all this. I hope that your device will work better.

By the way: the compatible memory module for your device are
DDR2 400/533 256 MB (PA3389U - 1 M 25)
512 MB DDR2-400/533 (PA3412U - 1 M 51)

Good luck!

Tags: Toshiba

Similar Questions

  • FlashGot suddenly causes FF hang after closing. Takes about a minute to stop the execution. Why?

    During 2 days, I noticed that FF does not close the output. The process continues to run for about a minute, using up to 100% of my resources. After the suite Mozilla troubleshooting guide, I found the culprit to be Flashgot. I can run ALL my extensions and plug-ins and don't have this problem. But at the point where I have activate Flashgot, this problem occurs. What is strange is that I've been running FF and Flashgot for a year with no problems. Even after updating both versions the latest, everything was fine. It was only a problem in the last 2 days. In addition, exactly the same thing is happening on my wife's Office, as well. Once again, that in the last 2 days. I tried uninstall/reinstall the two FF and Flashgot, but to no avail. What is going on?

    Create a new profile and delete the old one seemed to solve the problem. Why the problem occurred in the first place is beyond me. But after creating the new profile, restore all my favorites and reinstall Flashgot, everything seems to be a behavior wonderfully. For anyone else having similar problems, I recommend that you create the new profile. It is easy to do, as long as you save your old, then you can copy all of the files required to restore your preferences and bookmarks.

  • My Satellite is really slow and takes about 10 minutes to open a session

    Hello

    My satellite phone is really slow and takes about 10 minutes to open a session. It also takes awhile to open up applications in particular the internet. Once the internet is open, it takes a while to access the net. The application actually drags across from the scene and it looks like a curtain closing additional idling.

    Need help.

    Concerning
    Russ

    Hello

    Have you checked the CPU usage rate?
    Start the Task Manager and check if any strange background process needs the full CPU performance.

    I also recommend to check the laptop for some viruses and malware. These programs could make the laptop and the lazy BONE.

    However the portable equipment could bad work.
    You should check the memory using the Memtest86 program. It s freeware. Check the HARD drive for bad sectors and also try to defragment the HARD drive!

  • Start-up phase takes about 10 minutes for bot

    of course I changed something on my departure upward. now, it takes about 10 minutes before my office show upward. When I turn my computer on my screen is blue, almost black, and I get a dash flashing (-) in the upper left corner. it flashes for about 10 minutes. before he finally start. Help!

    [Moved from comments]

    Hello

    Thank you for writing to Microsoft Communities. From your problem description, I understand that you are facing problems when the computer starts.

    1. what operating system is installed on the computer?

    Please go ahead and follow the steps mentioned and later a update on the State of the question.

    Method 1: Check if the problem is caused by some faulty devices on your computer. I suggest that you disconnect all external devices except the mouse and keyboard to your computer and check to see if the same problem happens.

    Method 2: Try to run the troubleshooter of Performance:

    http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

    Method 3: Try to boot in safe mode and check if the same problem occurs.

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    (For Windows Vista)

    Method 4: If the question does not exist in Mode safe mode then try to set up your computer in a clean boot state, and check to see if the same problem happens.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

    Note: After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.

    More information: Optimize Windows 7 and Vista for better performance:

    http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

    http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

    Please follow these recommended steps and post if you still experience the problem.

  • We know the answer slow printer. We use XP and it takes about five minutes for the printer to answer.

    We know the answer slow printer.  We use XP and it takes about five minutes for the printer to answer.

    Hello

    1. have you you can all changes on the computer before this problem?
    2. What is the brand and model of the printer?
    3. have you updated the printer driver?

    Try to run the fix it tool in the following article and check.
    Problems printing and printing errors
    http://support.Microsoft.com/mats/printing_problems/

  • You try to transfer data to new computer, takes about 30 minutes to collect data, and then told me that it will take 33 + hours of transfer

    I have 2 PC, two 40 g X 2 g, an old score about 12 GB of data, 71% free, new is ready to receive. When I make the connection with a null cable and start, it takes about 30 minutes to put together and start the transfer, but it gives a transfer time of 33 + hrs and that means, I let it run for about 6 hours, and he was always less than 6% of fact. No games or large, larger files is about 12 MB. Any help? Bob

    If cable "null", you hear a serial RS-232 cable, you probably chose the slowest method of data transfer possible.  A serial cable tops out at raw data of 115 Kbps (115 000 bits per second) rate the most current Ethernet 100 Mbit/s connection - is about 1000 times faster.

    I don't know why some s/w you use takes 30 minutes to "collect" information before starting the transfer, but if you have about 12 GB of data (and don't have / want an Ethernet connection), why not just get a big enough USB.  You can get a 8 GB USB key for less than $15 and a 16 GB for about $20.  If you have USB 2.0 (which is likely, unless your old computer is older than 10 years), the maximum raw data rate is 480 Mbps with rates effective data around 20-30 MB/s for the memory sticks.

    At 20 MB/s, 12 GB should be transferred in about 600 seconds or 10 minutes.

  • Aero on vista on seems to make execution slower and start upward after the microsoft icon on screen-it takes about 1 minute to get on the desktop! Otherwise everything else is relatively ok - for vista, that is _

    I ran a check for preformance on my vista and it came as 2.6 - slow due to the Aero.  How to solve this problem and have rated overall performance.  Also when starting my Acer, it takes about 1 minute to start after the microsoft icon. After 1 minute, then the system tray and the desktop is displayed.  What's wrong?  I ran all the controls of viruses and worms, and all have been supported by Kaspersky or deleted, fixed or quarentined!
    Help!

    I ran a check for preformance on my vista and it came as 2.6 - slow due to the Aero.  How to solve this problem and have rated overall performance.  Also when starting my Acer, it takes about 1 minute to start after the microsoft icon. After 1 minute, then the system tray and the desktop is displayed.  What's wrong?  I ran all the controls of viruses and worms, and all have been supported by Kaspersky or deleted, fixed or quarentined!
    Help!

    You can read this:
    http://www.Vistax64.com/tutorials/81176-speed-up-performance-Vista.html

    t-4-2

  • It takes about 6 minutes for the computer to boot.

    * Original title: Windows 7 Starter

    It takes about 6 minutes for the computer to boot. I mounted early and disabled now needed to start programs.

    If it were my system:

    1. I'd be more suspicious of malware, run ADWcleaner and have a good program antivirus https://toolslib.net/downloads/viewdownload/1-adwcleaner/

    2. I would like to delete all programs that claim to make it work better, safer or faster computer.  The vast majority of them is actually malware

    3. I remove any "protection" software on your computer and let the only Antivirus product quality - more below...

    4. I would use the manufacturer of my disk drive hard testing program to ensure that it is not a failure

    5. I would like to be sure that none of the drives are more than 75% in use

    6. I would check my memory using the auditor memory Windows 7

    7. I would like to install and run Autoruns to check what is in the startup process

    8. AND, above all, focus on the applications installed.  Some of them are notorious resource hogs who insist on running at startup.

    9. I would like to delete startup programs/applications, unless I really need to start

      Common unbelievers that cause slow-start ups:

    • Garmin Express
    • Roxio anything
    • Skype
    • uTorrent
    • FrostWire
    • Trusteer
    • Dropbox
    • OneNote
    • EverNote
    • All Apple products
    • QuickBooks
    • Spotify
    • Pandora
    • AOL desktop
    • Some games, especially online ones

    What Antivirus buy?

  • Startup takes about 5 minutes to complete to start on my HP laptop.

    Desktop loads upwards just fine, fast, straight bar tool with the exception of the Wi Fi Connected icon, it takes about 5 minutes to appear, this time on that hard drive lite is a little hard. If you tap the icon on the tool bar network bars she says you are connected. If you try to open something out of the Office during that time, he just sits there watching waiting for you to start to complete. Once starting over thing work fine, that too, if you plug in a USB key during the startup time (5 minutes), you hear the sound that you always hear when you plug one but it doesn't appear in Windows Explorer until after 5 minutes of waiting. I did a system restore to a moment where it was sunny and that did not help. I ran a defrag on the C drive, I ran a disk check, with no errors found. I look in the task during this time Manager, and you see no programs running. I run Malwarebytes and Super Anti Spyware and nothing detected. Can someone help me with this?

    Hello

    Welcome to the Microsoft Community Forum.

    I understand that the process of starting your computer is slow. Let me ask you a few questions to better understand.

    1. What security software do you use?
    2. You did it all meaning hardware or software change?
    3. You get the error message? If Yes, when and what is the exact error message?

    I suggest that you perform a clean boot procedure, and then try to install the add-in.
     
    See the link to perform the clean boot.

    Method 1: How to perform a clean boot in Windows

    http://support.Microsoft.com/kb/929135/en-us

    Important: Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

    Note: See " " How to reset the computer to start normally after a boot minimum troubleshooting "to prepare the computer to start as usual after troubleshooting. "

    Method 3: Optimize Windows performance

    http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

    Note: Data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

    Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk be lost.

    Method 4: You can use the provided patch below it article and check if that helps to solve some problems.

    http://support.Microsoft.com/mats/slow_windows_performance/

    You can also see the article: Unexpectedly slow start in Windows 7 or in Windows Server 2008 R2

    http://support.Microsoft.com/kb/977419/en-us

    Please come back if the problem persists, we will be happy to help you further.

    Thank you

  • HP Officejet 5610 all-in-printer decided to take about 5 minutes to print or copy a document to a page.

    I have a HP Officejet 5610 all-in-one-3 years.  My printer decided to take about 5 minutes to print or copy a document to a page.  Can anyone help?

    Original title: impression of the printer

    Hi Phyllis,

    I suggest you follow the steps in the link given below.

    Solve printer problems

    http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Brief us with the State of the question. We will help you to come.

  • Roxio takes about 190 minutes to compress my dvd for burning, is this normal?

    Time to compress the video

    I have a laptop Dell Inspiron N4110 Win7 professional.  The laptop uses a dual-core Intel Pentium B940 / processor dual thread clocked at 2 GHz with 4 GB RAM and 200 GB of free space on the hard disk.  I am recording video analog (NTSC) and stereo audio to aid Easy VHS of Roxio hardware to DVD / software package.  Video is scanned in real time by the A/D converter.  A 100-minute VHS video produced a mpg of 6.13 GB hard disk file.  The compression process of Roxio to shrink the file to mpg of 6.13 GB less than 4.7 GB for recording on a DVD + R single takes about 190 minutes.  Is it a normal time for my laptop?  Are there other programs of compression that would be much faster?    Would be a better laptop with an Intel quad core / 8 processor i7-2860QM thread and 8 GB of RAM to reduce the significant period of time compression, for example less than 60 minutes?

    DVD-video is encoded more time-based
    as the size of the file. Compression is not necessary.

    A video file of 100 minutes should fit on a 4.7 GB DVD.

    Have you tried Windows DVD Maker?

    Windows 7 - burn a video DVD with Windows DVD Maker disc
    http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
    (Windows 7 Home Premium / Professional / Ultimate / Enterprise)

    The following freeware can also be worth a try:

    (FWIW) It's always a good idea to create a system
    Restore point before installing software or updates)

    DVD Flick
    http://www.videohelp.com/tools/DVD-flick
    (the download is: "dvdflick_setup_1.3.0.7.exe")
    (Download from (direct link) is the fastest).

    Save the file to your desktop or a folder on your
    hard drive and install from there.

    Be sure to read the Guide:
    http://www.dvdflick.NET/Guide.php

    Tutorials:

    Tutorial DVD Flick
    http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

    Burn any Format video DVD PC
    http://www.freevideoworkshop.com/dvdflicktutorial.htm

    AVI to DVD with DVD Flick Guide
    http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

    To create a video DVD base that should play in most
    free-standing DVD players... try the following...

    First... read the DVD Flick Guide to familiarize
    with the program.

    Open DVD Flick and insert a blank DVD in your drive.

    If the window of Autorun from your computer... just close it.

    Click the project settings button and check... Video /.
    Target format... residents United States... Choose... NTSC /.
    Accept.

    The title button left click Add and navigate to your
    Video clips and select the ones you want on the DVD.

    You can have by selecting one and then use
    the up and down buttons.

    To allow a longer time on the DVD... left click the
    The project settings button / select video / open the target
    Bitrate of drop window. Choose a will more small number
    result in a longer time on the DVD. Press on... Accept.

    The vertical bar to the left of the screen will tell you
    How much compression you need.

    Left click on the button create DVD / OK / Yes / Yes.

    Please wait while the DVD is created.

    When the text "Completed successfully" is displayed you
    DVD Flick can close. Now you can eject your DVD
    and play in your DVD player.

    At some point you might want to buy more
    software advanced as Sony, Cyberlink, Nero, Roxio,
    Adobe, Ulead, etc... but at least it is a start.

    Good luck.

  • The Print Test takes about 15 minutes to complete.

    I have the same problem with a D1520. I went through all the self-help and the Test print. The Print Test takes about 15 minutes to complete.

    This is caused by the failure of one of your cartridges.  Remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

  • Upgrade to Windows 7 - stop now U350 takes about 5 minutes

    I used a USB attached drive DVD/CD to upgrade to Windows 7 Ultimate edition, and only the one button recovery has stopped working.

    I'm very happy with the result with a single nagging problem.

    It takes the system about 5 minutes at the stop. There is nothing to indicate why it is so slow, and the lights indicate little or no system activity during this period.

    Otherwise, Windows 7 is very fine and a big improvement over Vista.

    Jim Kay


  • Turning on and turning off T61 takes about 5 minutes for each.

    I have a CTO of 6465 t61 and it is extremely slow when I power upward or turned off. It takes 5 good minutes each way. I have always run my norton anti-virus, defragment and clean temporary files, etc.. Can someone suggest a solution.

    Thank you

    Thanks that did the trick.

  • v3 takes about 5 minutes so that it starts after you disable all extensions, etc.

    Hi all

    I'm trying to understand why v3 SQL Developer takes so long to load up.
    I've searched the forums and made a few tweaks, but still takes forever (~ 5 minutes!)

    1 changed in appearance Windows
    2 disabled all extensions
    3. confirm that the "update automatically" is disabled

    Anything else I need to do? So most of the actions I take are really very slow.
    One thing I think that maybe that causes are that in TNS network file is huge... but I guess that it would be a success if I try to add a connection.

    Any help would be appreciated, because for now, it is not a usable software piece...

    Who thinks so.
    I make a set of those I really need (or even no) and place this file in a different directory, and then point to that one in preferences - - Advanced - Database Directory Tnsnames.

    Hope that helps,
    K.

Maybe you are looking for

  • I paid too much for Quicken 2016

    Yesterday I bought Quicken 2016 for $74.99.  REF. ID MN5FLO5MY DOCUMENT 181133805423 I can get the same program Quicken in Quicken for under $10 Please refund my $74.99 I get it direct Quicken.  Credit my M/C ending 0763. ELizabeth Brody

  • Failure of Black Dots and device - Tecra 8100

    Hey all, I was just given this Tecra 8100 and 2 of the many problems with it are that random black dots appear on the screen... and sometimes windows crashes due to a failure of the device (the monitor I guess). He got a new installation of XP Pro fr

  • Vista - How to report a bug to?

    As time passes, I find most annoying bugs with Vista EU on my Qosmio G20. I think I installed all the drivers available. But still things are simply unforgivable.To be altruistic and all :), I would like to report bugs so someone could correct. But I

  • remaining in close work % 3F round table

    I'm a bit complicated on narrow Panel? event. I want to clean some work are remained in consumer rountine that linked by queue. When I use the following code, the breakpoint cannot be controlled in highlight mode and has not kept information in a fil

  • Number with (good question) audio files after the upgrade to iTunes on the computer Windows XP 10.5

    Last night, I installed the itunes 10.5 update on my PC and now all my music files and audio sound distorted or corrupted. I called using the number provided on the help of itunes window. He told me that because I do not have an apple computer, they