L2l VPN and remote access VPN

Similar Questions

• Routing and remote access - on three subnetworked, two subnet unable to reach to the internet!

  Hello

  Good evening everyone.

  I had a problem in Routing and remote access on windows 2003 server.  This server is already configured as a file server, domain server, and application server. Also configured as a router (thanks to access routing & remote) to connect the three different networks with each other. If this server has three NICs installed and each separate NIC network cards represent.

  three different networks are - 192.42.160.0/24, 192.42.161.0/24, 192.42.162.0/24

  Three cards of the NETWORK adapter installed on the server as with the IP - next

  NIC - 1 = 192.42.160.220, Sub - 255.255.255.0, gateway - No.

  NIC - 2 = 192.42.161.220, Sub - 255.255.255.0, gateway - 192.161.220.112 (this ip address for internet access then 4 g router IP)

  -3 = 192.42.162.220, NETWORK cards, Sub - 255.255.255.0, gateway - No.

  Now the question is I can get Internet & (also scathing in router ip 192.42.161.112) one network i.e. - 192.42.161.0/24, BUT when I try to access the internet from another two network (192.42.160.0/24 & 192.42.162.0/24) I can not access and in addition can not ping to internet router ip - 192.42.161.112...

  So, how do I access the internet to another two network also?

  I was already the configuration of static routing for all three network but I wasn't always successful. I don't really know what exactly static routing this should be done in access routing & remote area so that all three network can reach to the internet?

  Here is the result of the current track...

  D:\Documents and Settings\Administrateur > route print

  IPv4 routing table
  ===========================================================================
  List of the interface
  0x1 ........................... MS TCP Loopback interface
  0x2... 00 30 05 8f ad 5 c... Broadcom NetXtreme Gigabit Ethernet - Mi Teefer2
  niport
  0 x 3... 0E 00 c4 f8 a7 0c... Network Intel(r) PRO/1000 GT Desktop Adapter - Teefer2 M
  iniport
  0 x 4... 0E 00 0c a7 c5 85... Intel (r) PRO/1000 GT Desktop Adapter #2 - Teefer
  2 miniport
  ===========================================================================
  ===========================================================================
  Active routes:
  Network Destination gateway metric Interface subnet mask
  0.0.0.0 0.0.0.0 192.42.161.112 192.42.161.220 1
  127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
  192.42.160.0 255.255.255.0 192.42.160.220 192.42.160.220 20
  192.42.160.220 255.255.255.255 127.0.0.1 127.0.0.1 20
  192.42.160.255 255.255.255.255 192.42.160.220 192.42.160.220 20
  192.42.161.0 255.255.255.0 192.42.161.220 192.42.161.220 20
  192.42.161.220 255.255.255.255 127.0.0.1 127.0.0.1 20
  192.42.161.255 255.255.255.255 192.42.161.220 192.42.161.220 20
  192.42.162.0 255.255.255.0 192.42.162.220 192.42.162.220 20
  192.42.162.220 255.255.255.255 127.0.0.1 127.0.0.1 20
  192.42.162.255 255.255.255.255 192.42.162.220 192.42.162.220 20
  224.0.0.0 240.0.0.0 192.42.160.220 192.42.160.220 20
  224.0.0.0 240.0.0.0 192.42.161.220 192.42.161.220 20
  224.0.0.0 240.0.0.0 192.42.162.220 192.42.162.220 20
  255.255.255.255 255.255.255.255 192.42.160.220 192.42.160.220 1
  255.255.255.255 255.255.255.255 192.42.161.220 192.42.161.220 1
  255.255.255.255 255.255.255.255 192.42.162.220 192.42.162.220 1
  Default gateway: 192.42.161.112
  ===========================================================================
  Persistent routes:
  None

  Sorry if I'm not able to explain properly. Please let me know if you have to explain more about it...

  Thank you all.

  Mahesh

  Hello Manu,

  Please post this question in the forums TechNet for Windows Server 2003. They will be able to guide you further.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

• The Routing and remote access could not start, error 214500037 (0x80004005)

  My windows server 2003 r2, failed to start the Routing and remote access services. And in the event an observer log, it has error code
  Event ID: 7024, with service specific error 2147500037 (0x80004005)
  I tried to reset tcp/ip and replace ias.mdb and dnary.mdb by a new, but it did not work.

  Thank you

  Hi budhihartono,

  Since you are facing problems with windows server 2003 r2, it would be better suited in the Technet Windows forum. Please post your question in the following TechNet Windows server forum to improve assistance:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Site to Site VPN and remote access on PIX 6.3 (3)

  Hello

  I have a vpn site-to site to remote access configured on the pix device. Everything works like a charm until I decide to perform authentication of the local client for remote vpn clients using the same card encryption from site to site. Thus, the tunnel from site to site is broken because that is trying to authenticate the local user.

  Is it possible to use the authentication of the remote local user for vpn clients on PIX without breaking other tunnels that use the same cryptomap?

  If the answer is to use separate crypro card so how can I assign the other encryption to use outside of the interface card, if only a single encryption card can be assigned to any given interface?

  When you configure the isakmp key, use the command

  ISAKMP KeyString keys by the peer-address [mask netmask] [No.-xauth] [No.-config-mode]

  No.-xauth will tell the isakmp won't the isakmp xauth for L2L and non-config-mode does not distribute the ip address of the peer L2L.

  Let us know if it works

  -Vikas

• VPN Site to Site and remote access

  I have ASA certified with 25 concurrent VPN connections. I want to know if I have 20 remote tunnels and 5 Site-to-Site created on the same time tunnels, and I want to establish the new Site to the other tunnel, is him Site to Site remove the remote tunnels or can not put in place. Site at tunnels have a higher priority than the remote access or they are the same. Site at tunnels are more important to me and I need them to repress the remote access tunnels.

  Hello

  Sorry for the confusion. No you can not set the parameter like this.

  Thank you

  Gilbert

• PIX 515E and remote access VPN

  I use a PIX 515E with: ASDM Version: 5,0000 51 PIX Version: 8.0 (4) and configure it with remote access VPN.

  I would like to get an email every time that a user login (and or disconnection) to the VPN. Remote clients use the Cisco VPN Client.

  Any help is appreciated,

  Hello

  Here is a link to the email configuration when you log in to the ASA/PIX: http://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliances/63884-config-asa-00.html#anc7

  Then you can create a list of message to send the logs only for the connection/disconnection of the VPN user: http://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliances/63884-config-asa-00.html#anc18

  There is a wire that is linked here: https://supportforums.cisco.com/discussion/10798976/asa-email-logging-issue

• Routing and remote access to the Server 2003

  I configured the remote access and routing service in my Server 2003 duly NAT enabled. All my clients are not in the field. All use internet and intranet connection using my proxy authentication provided by the administrator of the proxy server. I would like to restrict the clients except intranet connection. How to limit the customer?

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Create odbc connection between local access and remote access or sql remote

  I need to connect to a remote access or sql database using my local in access 2007 version.  I can't understand what I put in each of the available boxes.  I see only a SQL driver to the system section of the odbc Wizard.  If I decide that he wants to know where the sql server is... well, it's not local, I have a web address for this and may not know how to get the systΦme can recognize the information remotely.  Help, please!

  Means of access:

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://social.answers.Microsoft.com/forums/en-us/addbuz

  Access support at the link above.

  They will help you with your questions of access when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• L2L pix 501 and remote access VPN

  Hi, I'm working on an old 501 PIX w / Software 6.3 (5), he already have access to remote VPN configuration and works very well, but now he needs a L2L implemented. One thing I try to do all the work remotely via VPN or ssh to the machine. I don't know what's on the other end, but they swear that it is set up and maybe my problem is when I start putting in orders for the other VPN it breaks the remote VPN access. One thing that I have to do is NAT a host on the inside to appear as another host on the end. I use these commands and I think it works cannot be said.

  access-list 101 permit ip remote_network 255.255.255.0 local_server host

  public static 10.1.0.203 (inside, outside) - access list 101

  then

  access-list 102 permit ip host 10.1.0.203 192.168.50.83
  access-list 102 permit ip host 10.1.0.203 192.168.50.86
  access-list 102 permit ip host 10.1.0.203 192.168.50.50
  access-list 102 permit ip host 10.1.0.203 192.168.50.85

  and use it to match against

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  EMDs-map 10 ipsec-isakmp crypto map
  correspondence address card crypto emds-map 10 102
  card crypto emds-map 10 peers set remote_vpn_server
  card crypto emds-card 10 set of transformation-ESP-3DES-SHA

  then

  ISAKMP key magic_key address remote_vpn_server netmask 255.255.255.255
  ISAKMP identity hostname
  part of pre authentication ISAKMP policy 10
  ISAKMP policy 10 3des encryption
  ISAKMP policy 10 sha hash
  10 1 ISAKMP policy group
  ISAKMP life duration strategy 10 86400

  and that is where it usually breaks the VPN, I don't know if the other VPN works due to not being not able to get to this server to try to ping, I don't really like to try this stuff remotely but I don't have a lot of choice at the moment.

  Any thoughts?

  Thank you

  Jarrid Graham

  Yes, just use the number of different sequence with 1 name of the crypto map. Please also ensure that your dynamic crypto map, which is your vpn client has the sequence down the crypto map (more), because you want to make sure that the static crypto map (for lan-to-lan tunnel has higher sequence number (lower number)).

  The political isakmp sequence number does not match, it is processed from top to bottom (number less than the high number) and also long 1 set of isakmp policy corresponds to the remote peer, it will be negotiated properly.

  Hope that answers your question and please note useful post. Thank you.

• Routing and Remote Access Server & VPN

  We have Server Windows 2008 R2, which is our domain, but also DHCP server controller. On this server we have Setup RRA for VPN and it works fine. We had to stop our DC due to a failure and after I got the domain controller to the top and it is a problem for users that connect to the VPN.

  When users try to connect to the VPN, it connects successfully. But they did not access network as usual. I looked in the VPN properties, and it receives an IP address of 169.254.xxx.xx which is not the correct network IP address. So while the user who is remote think they are connected, they are currently not connected.

  Does anyone have advice what is the cause of this and how to troubleshoot or resolve?

  Hello

  Given that you are working on Windows 2008 R2 please post your question here:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

• CSA with the Client VPN and remote access

  Hello world!

  I have the folowing isue: I have to tune in to the CSA for a clinet it connects remote with VPN Client only. He should not be able to connect to any other network or lan or dial-up.

  No idea what the policy should change or tune?

  Thank you

  You can create an access network rule that depends on a State of the system. The State of the system can be defined to have a game of skill, which belongs to the range of VPN and the network access rule would declare that the client computer cannot act as a server on UDP/TCP ports when the State of the system is ensured.

  So, if the laptop is not connected to the VPN, it would not be able to act as a server for connections to all and will be locked out. You will need to create an exception for the IP address of the VPN server to your corporate offices and allow the CSA client opening these ports.

• PIX site to site and remote access

  Dear guy

  I have a PIX 515e with version 8.0 and the other side a 2811 router, the vpn site to site between these two devices is implemented, but I want some remote clients can connect to pix,.

  so is this possibe two implement a site to access remote vpn on pix interface (outside)?

  any clue?

  Hello

  Yes, it is quite possible. Please see attached the sample configuration. Note This is for pix v7.x, but it should work fine for 8.x

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00807f9a89.shtml

  HTH

  Jon

• EA2700 and remote access to the DVR

  Does anyone have a solution for the router settings allow access remotely
  Recorders digital windows and Linux?

  Justme2012 wrote:
  OK, so now I activated Remoting but the remote routers
  Management port is different from the default port on the DVR.

  The ports must be different. In this way it will not create a conflict. No two devices must use the same port numbers. Once again as what has been mentioned in this thread, you must use the port number provided by the manufacturer for the DVR and just leave the router uses it is default remote management port. This is to ensure that there will be no conflict. To check if the ports were opened successfully you can do an audit of port. You can use this site to check it out. http://ping.EU/port-chk/

• Create the new user and remote access

  Hello, I create a new user from the admin panel. Now, I want to ask how my friend will have access to my nas also. He tries to connect from https://readycloud.netgear.com/ but it does not connect!

  I want to create some users and they can have access to my files from ther House. How can I do?

  I sin ready 102.

  Thank you

  Hi h_tsopelas,

  Please check this articleReadyCLOUD.

  I hope this helps!

  Kind regards

  BrianL
  NETGEAR community

• Running Weblogic JDeveloper and remote access

  Hello. JDeveloper 11.1.1.5.0 I can run an application in my machine and I can access this application from another computer, connected to the same network, using the URL as 192.168.XXX.XXX:7010/myapp/. But after the upgrade in Jdeveloper 11.1.1.6.0 I lost this feature. Maybe I need a configuration to do. So how to run Weblogic of JDeveloper, such as the localhost (192.168.XXX.XXX) can be viewed from another machine connected to the same network?
  
  I really appreciate your help.
  
  Thank you.

  Check the properties of internal application servers. Here, you set the name of the server. If you put 127.0.0.1 in there you cannot reach the server from other pc. If you put your local ip in there, it should work as in 11.1.1.5.0

  Timo