L50 - B satellite will not start when the battery is completely discharged

Similar Questions

• Laptop will not start without the battery attached

  Hello

  I have a Hp pavilion dv6700 series (dv6840el) and just, it will not start without the battery attached.

  If I plug in the AC adapter, I get some computer activity (fan, noise of the dvd player and HD drive spins) for about 5 seconds, then shuts down.

  Once I plug the battery (which is dying, who need a replacement), the laptop starts fine.

  So my question is: what is a motherboard or a problem with the AC adapter?

  The AC adapter looks ok, however. But if I am considering buying a spare battery, I assure you that I have a new adapter as well.

  Thanks in advance.

  Hello

  Visit this link

  http://h10025.www1.HP.com/ewfrf/WC/documentSubCategory?tmp_rule=61317&tmp_task=solveCategory&CC=US&DLC=en&lang=en&LC=en&Product=5081068&Query=dv7-6052ea&Tool=

  Good Luk

• Satellite M50D-A-10W does not start after the battery is completely empty

  I have a laptop Toshiba Satellite laptop Satellite M50d-A-10W AMD A, 15.6.

  I have problem when the battery is completely empty I have to use the needle achieve hard reset the switch behind the laptop... so I can't enter in bootmode with f2

  How can I solve the problem?

  Thank you

  I guess you are talking about the shutdown procedure force as described in this document:
  http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

  This problem can appear in case the PC freezes, do not start or has a power failure.

  I think that the laptop turns off in case the battery is completely empty. In this case the system does not close properly.
  As the default state, the system keeps laptop but usually the unit carries out a stop of the hybrid. This procedure allows the laptop to start much more quickly, but it could affect the system startup in case something goes wrong during the process of closing.
  You can disable this hybrid mode and in my opinion, it is also recommended.

  Details:
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

  However, to avoid these problems, it of very important to correctly perform the closing procedure.

• L50-A-19N satellite will not start in the BIOS

  Hello

  I have a problem with my laptop.
  I have installed 8.1 and fedora 20 windows.

  I was in fedora, when I decided to restart Windows.
  Instead of grub, I saw message with the error and my notebook has stopped booting.

  I pressed the power button / stop, he died but when Im trying to start it again, I see the logo of Toshiba Leading Innovation and that's it.

  It will not start any further.
  I decided to get my system, but when I press F2 or F12, nothing happens.
  I can't get into the BIOS!

  Please, help me to solve it.

  Somehow, this seems really strange
  I m wondering why you are unable to access the BIOS

  What you can try to do is, remove the laptop HARD drive and switch on and press F2.
  From my point of view of the rare even if the isn't HARD drive connected, you should be able to access the BIOS.

  But for Pierre, I'm not very well your laptop problem is related to the faulty / corrupt Boot partition m

  However, your comments would be greatly appreciated

• C50-A-19 t satellite does not start with the battery mounted

  OK, first post here.

  I see similar questions coming, but as they are never QUITE the same, I am that posing in a new thread.

  I left my Satellite from one day to the next (do not remember if I had put off, or he simply had 'gone to sleep', but it has been connected to the grid).

  When I got to reboot, I got a power light on, but screen blank (black). After reading a few similar complaints on the internet (via another laptop!), I tried to remove the battery and power from the grid.
  This worked well (I write him in this state right now).

  But whenever I put the battery and try again, it will fail in the same way.
  I tried this company "press and hold power for 30 seconds" without success (but I'm not 100% sure of the EXACT procedure actions sequence).

  I have a few questions:

  (1) I take the laptop away from my office - is there a problem with everything just works like this (i.e. of the grid, with no battery inserted) indefinitely?

  (2) in any case, I want to solve the problem.
  If the battery has run COMPLETELY flat, and that the laptop can not it lights but also operate normally?

  Alternatively, is probably that the battery has not experienced a catastrophic failure and simply needs to replace?
  If so, I'll just buy a. BUT...

  What I don't want to do, is to pay for a costly spare battery, to find that it was actually another factor at the origin of the problem, and I'm back to square one and out of Pocket!

  Any advice would be welcome.

  Thank you

  Mike

  Hello

  According to your assignment, in most cases, you use the laptop connected to the power adapter but no battery. Is this correct?

  First we need to know that if the AC adapter is plugged in, the laptop should work correctly with - and without inserting the battery.
  If you unplug the AC adapter, the laptop should automatically switch to battery power. In this case, it is important that the battery is pretty cool power to provide the power for the laptop.
  In case the battery is empty, the laptop will not light.

  I recommend to insert the battery plug the power adapter and charge the battery for a longer period of time.

  You should also check if the battery is recognized by the Windows system and the battery charge indicator (battery in the taskbar icon) shows the State of battery charge.

  In case the battery is fully charged and the laptop does not work using the battery power only, you should test the new battery.
  If new battery does not solve the problem, s for laptop hardware needs an audit.

• 650 satellite will not start, tried the usual suggestions without success

  Satellite C650 willing daughter of a screen empty other than a flashing cursor in the top left when the laptop is turned on. I have read the various threads (not on this site) and tried to turn on/off and pressing F8 (also tried F9 and 0 zero) to try to do a system recovery but nothing else happen to beep for a few seconds and then back to the screen empty.

  She has not the recovery disks. Can anyone help.

  The laptop is under warranty until December 5, but I don't know if it would be covered for this problem?

  A few days ago, I had the same problem. I tried everything but to no avail. I m not 100% sure, but I think it was a virus or something similar something killed hat.

  In my case, only the clean OS install solved the problem. I ve used created recovery DVD and now I use factory again.

  I recommend you order on https://backupmedia.toshiba.eu/landing.aspx's original toshiba recovery disc
  Install the OS using this disk and everything will be OK again.

• A33 satellite will not start on the hard drive even after the installation of the new system

  Hello, I need help, my A33 does not start on a hard drive. It is to see the drive hard in the bios and even by operating the drive when you go to install. But as soon as it will boot to the hard drive, it is just a black screen. It is very strange that you can see the hard drive in the bios and even with a diagnostics disk. I can see, scan it and check it by starting with a diagnostic disk, but when I start the computer, it doesn't do anything.

  Help please!

  Stand by. Your ad is so confused. When you read can you understand what you wrote?

  BIOS recognizes the HARD drive correctly, no?
  When you use bootable disk for the installation of the OS is properly recognized HDD?
  You can install OS using the original recovery disc or by using the Microsoft installation disc?

• I downloaded bridge in my application, but it will not start when I click the icon

  I downloaded bridge in my application, but it will not start when I click the icon

  Hello

  Did you try to unsintall and reinstall the application?

  Kind regards

  Sheena

• SK2061: The wireless keyboard will not connect when the PC is turned on.

  My problem is, when I start the PC, (HPK-15 500, 319NA), wireless (SK2061) keyboard, does not connect. I have to shut down the PC so he can connect (no restart, you must stop it).  Have had the PC for 5 months and it has been published. Not changed the battery makes no difference.

  The internet statement States I shoud push the blue button until the USB receiver flashes. This PC does not have an external USB receiver, I guess it's built in! The mouse works OK.

  Hello @JimCar82,

  I read your post on how the wireless keyboard will not connect when the computer is turned on, and I'd be happy to help you in this case!

  Re-connect your keyboard to your desktop computer wireless, I advise you to follow the steps described in this document on the keyboard and wireless mouse troubleshooting. The USB receiver should be found at the back of the tower.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• My dell optiplex 740 will not start. The screen is black, once it displays the Dell logo. It does not say that the computer is in mode 'sleep'.

  My dell optiplex 740 will not start.  The screen is black, once it displays the Dell logo.  It does not say that the computer is in mode 'sleep'.

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You receive an error message?

  Method 1

  See the articles below and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

  Method 2

  I suggest that you start the computer in the last good known Configuration mode and safe mode, post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Method 3

  If the computer can boot in any mode, then I suggest that you perform the clean boot procedure and check if it helps.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Computer will not start at the top. I was first getting a 'file problem' message on nv4_mini.sys. After finding that someone else had...

  Computer will not start at the top. I was first getting a 'file problem' message on nv4_mini.sys. After finding that someone else had the same problem and I responded went to try the solution but then started to get the message that the file: \windows\system32\config\system is missing or corupted. Have tried to do where I could start up in safe mode and cannot. Tried to boot from the installation CD, but when I try to make the system recovery and choose the system to recover nothing happens. This isn't regarding the password. I have a Dimension 4500 XP sp3

  Hi BrianJ641,

  Follow the steps in the article.

  http://support.Microsoft.com/kb/307545

  Note: When you are prompted to type the administrator password, you can type if you set the password. If the administrator password is blank, just press ENTER.

• Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

  Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
  Tried running firefox.exe Pei but error message:

  XML parsing error: the undefined entity
  Location: chrome://mozapps/content/profile/profileSelection.xul
  Line 18, column 1:
  "< dialog < =" "^ =" "p =" "> < / dialogue >

  Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

  Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

• I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250.

  Internet, not able to browse computers on the network

  The computer has internet access, but I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250. Also in the event log Workstation reports: could not load RDR device driver. Cannot run the sfc in safemode, gives the 0x000006ba error, the rpc server is unavailable. Runs under normal windows, noticed in the registry last run: 0x000003e3 error code (try adding c:\windows\system32\drivesr\i81xnt5.sys to the dllcache)

  I'm puzzled.

  Hello

  I suggest you to send your request in the below link.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• (Redirected) Dell audio drivers will not load when the system is turned on for the first time after his stop.

  Dell audio drivers will not load when the system is turned on for the first time after adoption of Windows 10. I have to reboot every time. So what I'm doing puts the system into sleep. in this way, I don't need to stop and restart the system. It is Dell Inspiron N5559. Audio drivers are installed and up-to-date. Equipment works correctly.

  Hi akilesh.sharma18,

  Please repost this in the Audio forum from the laptop to help.

  http://en.community.Dell.com/support-forums/laptop/f/3517

• Vista - computer will not start without the disc

  loaded vista on my computer - now computer will not start without the disc

  Went into my bios as suggested to check the boot order - and, Yes, I got HDD1 as first boot then CD - but then I remembered something I had seen earlier on my computer - it was on the list the HD which had my system like HDD0 files - so, I checked and there it was - listed option HDD0 so I changed HDD1 of HDD0 and was able to boot my computer without the disk system.  Hope this helps someone else with the same prob.