L50D-B-147 satellite startup problems

Similar Questions

• Satellite startup problems C50

  Hi all need a little advice on my laptop.

  It was working fine a few months ago, without any problem, it has been stored in a safe place, so he was not hit, hit or fell.

  However, I tried to use it last night, but he shows no sign of life... I plug power adapter and battery lights up as it should, press the power button and it flashes lifeless in the system at all.

  A flash every 6 seconds

  Ive tried all the methods reset, removed the battery cmos, memory and the HARD drive and re - them seated firmly but still nothing
  What I noticed when I remove the memory chip and hit the power station remaining lit and the hard disk turns but nothing on the screen at all

  Any help would be appreciated

  83 views! someone must have had a similar problem or knows how to solve this problem.

  Toshiba tech guys not getting involved in this forum?

  The laptop is not that old and now I can't even turn on this bitch to use.

  Any ideas at all you'd be grateful
  see you soon

• Re: Satellite L300 - problems after installing Windows 7

  Hello

  I have a Toshiba Satellite L300 bought with Windows Vista 32 bit about 4 months later, I got my Windows 7 64 bit done.

  1 my laptop has startup problems after I installed the drivers give him additional drivers to go, but I have downloaded drivers for Windows 7 64 bit

  2nd I hear music and want to hear the next song is what I use, but not net if the keyboard fn +? don't not go and play / pause next thank you Stop and media player tased funtionieren not only the weis tase of modest silence

  P.s. to translate with google

  Thanks in advance
  Patrick

  Hi Patrick,

  To be honest, your ad is very difficult to understand and I don t know what you mean exactly.

  According to your assignment, it seems that you need a driver and you can get all the drivers here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  In regards to the FN keys you have Toshiba Value added Package, and Flash Cards Support utility. Everything can be downloaded from the official page of Toshiba.

• iMac troubleshooting ADVANCED startup problem

  Hello. My iMac does not complete the boot process. It chime, then display the Apple logo.

  The progress bar will get about halfway, then disappears from the apple logo. Gray rest screen for about 2 minutes, then the computer shuts off and the process repeats. NOTE: the computer does NOT respond to the "safe" mode (shift key) or (command-R) disk utility commands. What else can I try?

  Start - computer restarts by itself-Yosemite

  Resolve startup problems-

  Resolve startup problems - (2)

  Resolve startup problems - (3)

• message from startup problem: imac photos: er zich een has doing voorgedaan bij het recovering bevoegdheden van (an error occurred in restoring the powers)

  message from startup problem: imac photos: er zich een has doing voorgedaan bij het recovering bevoegdheden van (an error occurred in restoring the powers)

  Do you mean, there is an error message about problems with access rights? (toegangsrechten?)

  Where your photo library is stored? In your pictures folder, or on an external drive?

  You share the photo library with another user?

• New problem z50 - 75 wireless? Startup problem

  Hello

  I had an another hp laptop which had a problems but the know-how could not fix it so they give money and I brought another Hp 4 days but then she had to be exchanged because of defective. Currys and PCWORLD even gave, but the problem kept pass. So I just paid the HP one and brought 3 days LENOVO Z50-75 it y a. the first Hp laptop, I had, had dns clients warnings in Event Viewer when you use wireless. Same thing on the new computer hp laptop. This problem still occurs in the LENOVO one too. These events started in Windows 10 for all laptops hp and lenovo. My computer laptop lenovo came with windows 10 in any case. So either it's a bug that should be fixed by a new update for the network adapter needs to be released. Computer laptop lenovo has Qualcomm Atheros the old hp laptop realtek the new computer hp laptop that was defective was and intel double wireless broadband and the same edition, DNS CLIENT EVENTS 1014 WARNINGS are still happening. This is definetley not my ISP fault because I replaced the router, more they found nothing on a week 2 diagnostics test on my internet. SO I just want to say lenovo that if there is a way you can fix this. Another thing is that after installation WIN10 threshold 2 on Lenovo Z50-75 when starting of the laptop it shows the logo screen once then black lenovo and then black screen again, then it boots. I have also all the latest updates. So if there is a way guys can fix that also. I'll post this in the microsoft forums too if they can help. Thank you

  Hi I managed to solve this problem by disabling the DNS CLIENT service, but always the startup problem also happens when I stop or restart the cirlce logo going arouns the shows as usual then flashes then closed restartsor and the same thing happens in the Welcome screen it flashes (black screen for a second), and goes after UPDATE of TH2

• HP Pavilion 23: startup problems

  Because we bought our computer in October 2014, we had many problems with the start, problems of drivers, startup problems, graphic card problems and more. It was supposed to be fixed once by the bu retailer still, there are questions. The biggest problem is starting:-it freezes, error messages that say lag not found drivers or disk not detected though when checked is. Also, we have done numerous resets hard which are just a quick temporary solution and back problems. We pay every month for a service contract with the retailer, but they mostly just try to run the store for our computer repair you... NOT HAPPY because for the third day, we bought there have been problems and we haven't bought a computer to sit in a workshop constantly, not at the price we paid coupled with the monthly fee for whatr amounts to nothing. Is there something we can do to solve this problem without driving miles and being without a computer that actually, we bought to USE?

  Hello

  Without compromising your contract, I suggest

  SYSINTERNALS which is a suite of tiny applications bit that may help.

  https://TechNet.Microsoft.com/en-us/Sysinternals/default

  Now only 3 or 4 are likely to be beneficial, and some does not at all because they are for servers etc.

  Thus a special interest may be...

  AutoRuns

  LoadOrder

  RamMap (maybe)

  Contig (maybe)

  PageDfrg

  ROOTKITREVEALER

  DiskView (maybe)

  PsInfo (not really)

  psping (not really)

  After trying a few please ask if there is something to be interpreted.

  I suggest you turn off auto update if you can.

• URGENT HELP PLEASE! Windows did an automatic update finished & gave me the Option "restart now or later. I chose Now.A screen from Windows is going down, a startup problem occurred immediately after the installation of updates, this has happened about 9 h

  Windows has finished just do the automatic updates on my Sony Vaio... He said that he should be released on... When it restarted it goes to the ' start windows normally, safe mode, safe mode w/network, safe w/command prompt mode and the last known good configuration "screen... I tried "start windows normally", and last known good configuration, and no matter what I did, it looks like its about to begin, with the 'windows' logo & he says it's the boot process, but then instantly a screen flashes, but too fast for me to read what he says, so I immediately finished fashion splash screen choose again. Whenever I try to get my PC to boot it goes through this again. Exactly... I tried restarting, shutdown PC up to 30 min. waiting & more & again it does the same thing & will NOT start! HELP PLEASE!
  I do not have my current work & News & saved downloads & need help & I timed commitments to people... ASAP PLEASE!
  Thanking you in advance...

  Windows XP logon screen does not appear and the computer continuously restarts
  http://support.Microsoft.com/kb/310396

  Resources to solve startup problems in Windows XP
  http://support.Microsoft.com/kb/308041 TaurArian [MVP] 2005-2010 - Update Services

• Startup problem blue screen that seems to be associated with BHDRVX64

  I have a laptop model Dell Inspiron N5110 running Windows 7 Home Premium 64 - Bit.  I have Norton Security Suite running - seems to be normal.  When I started my pc this morning, I got the dreaded blue screen of death.  A window will appear which indicates that there is a startup problems and offers several options to correct the startup problem.  One option is to run a startup repair program.  I tried and failed, then it has proposed restoring to a previous date program.  It does not work.  He suggested then reload the Windows program by providing more options of Windows rereloading.  I'll try the drive backuo system I created when I got the new computer-, but then, for reasons unknown, my pc suddenly decided to restart all of himself and it started normally.  Happy, happy.  But then a window pops up that says my computer has a device problem that has been identified as "ROOT\LEGACY_BHDRVX64\0000" she added that "BHDRVX64" was absent, does not, or that he needed a driver. Okay now my pc works normally, but I'm afraid to turn my pc off because this problem seems to be associated with start-up. »

  HELP, HELP. Any suggestion would be appreciated. Thank you. Bobbysan 70

  This program is part of the Norton Security software, so I would like to uninstall and reinstall.  For more information, see with Symantec.  Here is a link to the Google search, I did, FWIW.

  http://www.google.com/webhp?sourceid=toolbar-instant&hl=en&ion=1&qscrl=1&rlz=1T4TSNP_enUS464US464#hl=en&sugexp=les%3B&gs_nf=3&cp=8&gs_id=0&xhr=t&q=BHDRVX64&pf=p&tbo=d&qscrl=1&rlz=1T4TSNP_enUS464US464&output=search&sclient=psy-ab&oq=BHDRVX64&gs_l=&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.&fp=89c683d2e84ef3a4&bpcl=38625945&biw=768&bih=460&ion=1

  When you got your system back as you, I invite you to buy an external hard drive, and a good backup 3rd party program. You can configure it to automatically do everything in time and frequency of your choice. 1 TB external hard disks around $ 70 these days and a very good FREE backup program corresponds to the Easeus todo backup free of charge that you can download from

  http://www.todo-backup.com/products/home/free-backup-software.htm . Who can make you save a lot of time and frustration, the next time something like this happens. Sooner or later, it happens to all computers for one reason or another.

  Good luck.

• Instance startup problem

  Hello
  
  We have a CCR 2 node (ud1 UD2) environment, it was resolved to the top for a long time. We were able to start and stop instances and the database without problem.
  
  Suddenly 2 days back NODE1 has failed. Since then, we are not able to start the node NODE1 and getting following error: - (NODE2 is in place and fine tunning)
  
  [oracle@SER1 ~] $ srvctl start instance d SERVER1-i NODE1
  PRCD-1027: Impossible to retrieve the SERVER1 database
  RPRC-1070: could not verify if the ora.server1.db resource is registered
  Cannot communicate with crsd
  
  In addition, while trying to issue the boot command, get following error:
  
  $ sqlplus / as sysdba
  
  SQL > startup;
  ORA-01078: failure in the treatment of system settings
  ORA-01565: error in the identification of file "+ ORADFLT/server1/datafile/spfile.dbf".
  ORA-17503: ksfdopn:2 could not open the file +ORADFLT/server1/datafile/spfile.dbf
  ORA-29701: unable to connect to the Cluster Synchronization Service
  
  It is not the first time that we are launching this command. Please help with this problem...
  
  Thank you!
  
  Published by: 851602 on July 22, 2011 03:47
  
  Published by: 851602 on July 22, 2011 03:50

  Can you also please make sure that all network interfaces are correct.
  Ping the private sector of both nodes of interconnection and make sure that the servers can communicate.

  You should also look at 'How to Troubleshoot Grid Infrastructure startup problems [ID 1050908.1]'

  You said in your 1st post + "suddenly 2 days back NODE1 got failed...". » +
  That happened the node does get deported, did the crash of the instance...?
  Have you looked in the nodes of the log files if there are errors during this time? I don't understand that you can't get any kind of message in the log files to give us an indication of what could be wrong.

  Please look at all the files following logs on both nodes during the period when the 1st omitted node:

  /log//alert.log
  /log//crsd/crsd.log
  /log//cssd/ocssd.log
  /log//ohasd/ohasd.log
  

  Concerning

  Published by: user10506095 on July 25, 2011 12:02

• Satellite S1800-814: startup problem, screen is black

  I know there are several comments here to point out how the black screen at startup. I think my problem is similar, but I need a few more details.

  A year ago, a friend of mine gave me his old laptop, a Satellite 1800-814. I use it mainly as a typewriter and check my email. He could never operate on battery only, longer than for a few seconds, but I've always used it with the connected power cable, no problems. Sometimes it wouldn't start, and I had to unplug the power supply for a while to turn on.

  I was visiting someone and wanted to connect to the Internet. They had this USB wireless modem, that I have it plugged into my Toshiba. During installation, the PC froze, and I had to reboot by pressing the button market for some time. He did restart, but at a standstill. I restarted again, sometimes had it works, sometimes not, and ultimately he entered its current state: with the power cord plugged in, it will start, I'll hear the processor fan (or whatever it is) work and the lights of the battery and the power will be green at the bottom of the keyboard.

  The screen, however, is black, there not all sounds and ceilings and the insert key lights do not react to what whether - they are permanently gone.

  What is happening here? I tried to remove the battery, give it some time and then reinsert, but in vain. I also tried to start it upward with the USB connected modem, no luck there either. What I do have an appointment with the Doc of PC, or can I fix it?

  I have really important documents there. Grateful for any help!

  Your description is quite long, but I'm still confused. You mixed several questions in the description of the problem and there is no stated clear what happens when you press the button walk / stop.

  Power is ON?
  Is there a HARD disk activity?
  You see something on the screen?
  What happens if you use the power supply only (without the battery inside)?

  Sorry, but it is not easy to tell what can be the problem. The best thing you can do is to contact someone with enough experience PC. The person who has the laptop on the desk and try to start this laptop can be more specific about possible problems.

  BTW: Please check this http://support.toshiba-tro.de/KB0/TSD57013H000JR01.htm interesting document

• Keyboard and beep on startup with Satellite A80 problem

  Satellite A80 continuous beep on startup after the keyboard does not work. He writes only

  Post edited by: habib00

  Hello h,.

  I suggest you to bring your machine to a local service partner, or at least by a technician who is familiar with toshiba laptops, because your question looks quite related to the material.
  Someone pour some liquids above? I had the same problem a few years ago that my sister pours coke on the keyboard of my satellite 2430. :(

  Would like to hear a response from you :)

  Welcome them

• Satellite L650D startup problem - only black screen

  Hello Experts,

  I have Toshiba Satellite L650D which is strange since the last few days.
  The problem is that it lights in general.

  Unlike other similar problems on the web, he won't go to the Toshiba start screen.
  Screen stays black! When I try first to power, I hear only a few sounds DVD player nothing else.
  When I try to reset it now button / stop for 30 seconds or more, I hear hard drive (or power) sound, but nothing happens.

  I have reset hard randomly wihout battery powered, with battery without power and without battery without power. After many attempts it suddenly starts normally and works fine afterwards. It is since the last days of thre appening. whenever I have stop, I have to do

  . I am writing from the same laptop. If I stopped it now, it will still take me 30 minutes and many random combinations of hard reset to make it work.

  Someone suggested that the power output of the card could be a problem. can we check voltage output without fancy electrical appliance?

  Help, please. I can't afford new laptop right now.

  > I have reset hard randomly wihout battery powered, with battery without power and without battery without power. After many attempts it suddenly starts normally and works fine afterwards. It is since the last days of thre appening. whenever I have stop, I have to do

  I'm afraid there's something wrong with the motherboard or the part connected to the mobo as RAM modules m.
  If you have not checked the RAM modules in the past, I'd recommend this as faulty RAM could affect the functionality of the laptop. In addition the RAM modules are not very expensive, so it s worth to check the following items.

  But please don t understand me wrong. I put t say there is a problem with the RAM. I said, this could be the troublemaker. So please don't be disappointed if this workaround solution would not help.

• Satellite Pro L300-128 - startup problem

  Hi all

  I recently bought a Satellite Pro L300-128 GB specification, that has a Celeron M550 running Windows XP and a construction date of the end of June 2008. I have a problem with the switching on of the machine if it has been turned off for a long period of time.

  Basically, if the AC cable is inserted into the computer laptop and plugged in, the green light turns on, but pressing the button it does nothing. By the process of elimination, I have found that, after a short period of time (say 15-30 minutes) if (and only if) the AC cable is then removed from the laptop, it lights up then!

  Plug the AC cable, while the laptop is on, do not cut the machine and charge the battery as usual. The battery life seems very good, if a little short (say 1.5 - 1.75 hours when used "constantly").

  If the computer is restarted, it lights again very well - if it is turned off and left for a few minutes, once again no problem. But, if she is not with the battery fully charged and left all night - it lights again in the morning.

  Now, as a new machine, I'm wondering if the battery needs a long initial load (such as a mobile phone)? Nothing is said about it in the manual. I have not yet checked if the battery down completely himself during the night. I haven't run the battery to the laptop for a long time (say all day) to 'trickle charge '. I don't know if the period from 15 to 30 minutes to get the thing started is once again because the battery is completely discharged during the night (I need to check the BIOS to see if "Wake up we LAN/wireless" is activated)-anyone know how long a fully discharged battery must be charged before that the machine will let you start it?

  Under the machine, there are two battery release buttons and it seems loose - I don't know if it's related, but can't see how. Moreover, when the question arose (during the first delivery the laptop), I removed the battery and tried power upwards of food, but nothing to do.

  I ran all the software updates (chipset etc) I can find on the download page, the BIOS version is 1.40 (last) of the factory.

  Any suggestions would be welcome before I have use the service of repair under warranty for the first time! I don't know if it is related to the fact that the power button seems to be a micro switch rather than a good button/switch in the conventional sense of the term, i.e. you can 'feel' it do something!

  Thank you very much
  Richard

  Hello

  If you have purchased a new laptop, the battery is empty and needs to be charged in the first place.
  You can also connect the adapter to the laptop while the battery is empty and the laptop should also lights up properly.
  The laptop must also run without the battery and using only the AC adapter.

  It should also be possible to put the laptop by pressing the power button for about a second, if this is not possible, a malfunction of the laptop could be possible.

  In such cases, it s always advisable to contact the local ASP for a verification of the laptop.

  I mean your laptop is under warranty and if something is not wrong with the machine so everything must be replaced free of charge

  In my opinion, the laptop must be checked!

  Concerning

• Satellite 2410-303 startup problem,!... urgent

  Hello!..
  I have
  Toshiba Satellite S2410-303 Notebook
  P4 1700/256 / 30 G, 15XT, CDW, LM
  and had Windows XP home.
  I use my cell phone without a network.
  When I push the power on the laptop, it is
  No not from Windows XP. I just see "contact tomorrow with TOSHIBA.
  message from red logo and getting this message;
  ----------------------------------------------------
  Intel Boot Agent Version 4.1.06
  Copyright (C) 1997-2002, Intel Corporation

  Client Mac ADDR: 00 00 39 xx xx 8B GUID: 4069 19 3 xxxx CADxxxxxxxx 4DB01E00
  PXE - E53: no boot file received

  PXE - M0F: Exit Intel Boot Agent
  Insert system disk in drive.
  Press any key when ready...
  -----------------------------------------------------
  After 5 - 6 times and try to open with power button windowsXP starts, but after 5 - 6 times I turn the laptop on and outside. Windows XP started.
  I looked at the bios settings disk HARD/floppy/CD-CD-ROM/LAN player it's just. I use the latest bios updated.
  What is wrong please advise
  What is the problem please help...
  Thank you very much

  [Edited by: admin November 16 04 08:18]

  Hello
  I have a Satellite 2430-101, which has had similar problems.

  Seems to me that your computer laptop sometimes Don t recognize your HARD drive.

  My suggestion is, if you have another HARD disk, change it to look if the problem persists.

  If so, I think that your IDE controller that is responsible for the detection of your HARD drive is damaged.

  Good bye