L520 or T520

Similar Questions

• Designjet t520: designjet t520 error b3d73738

  HP Designjet T520 36 inches gives b3d73738 on the screen, never seen that before and isn't anythong on this subject,

  the printer does not start or let me take any operation

  need urgent hepl on this issue.

  Thank you

  Hello

  Try the following

  -Replace the power cable

  -Connect the printer to a different outlet

  -Isolate the printer, remove the ink cartridges, print head, cable connectivity

  If you still have problems, you may need to replace the APC's hand

• Designjet T520 36 inches (CQ893): Designjet T520 36 - in

  My tracer: HP designjet T520 36 inches (CQ893) start.

  The screen is blue, B87E7114 error code

  Turn off and turn on probably. Power button 15 seconds and powering button 50 seconds also.

  If push yellow power light. power on no beep error.

  End of warranty: 2015.02

  What is my error code?

  Thank you

  Sorry, but your post is very confusing.  You've got an ok error code, after that I do not understand what you mean by switch / stop and seconds.  First thing you need to do is to unplug the plotter of the power source.  Wait about 30 seconds and plug back in and if the power does not turn on by itself, use the power button to turn it on and tell us what appears on the screen.

• HPDM 4.7 / HP T520: Error Code 34603008 / Imaging with HPDM 4.7

  Hi all

  I have a problem with a T520 HP with HP Device Manager 4.7 SP4 running on the server 2012R2, trying to capture an image from a T520 HP ThinPro 6, version of the 4.7.3671.25484 agent.

  Capture the profile and the settings worked. Server and devices are in the same subnet. Manual on the thin client for server ftp works. There is no activity in the ftp server log when I start the process of the image. The Windows Firewall is disabled. Activating set mode cache does not work because it is not yet supported for ThinPro 6.

  2016-09-19 12:04:43 [Fehlercode: 34603008] [Modul: Agent] [category: 0] 2016-09-19 12:04:43 [Fehlerdetails]: Erfassen Sie das Image in das Master-repository. Fehler beim/Repository/Images/Spegg_T520_ThinPro6 auf his Pracht von Spegg_T520_ThinPro6.dd.gz. Implement von CaptureImage-task fehlgeschlagen. Fehlercode: 34603008, Fehlerinfo:... /... / Task/common/MachiningTask.h@39: failed to manage the image of post. .. /.. / Task/linux/ImageTask_Thinpro.cpp@1583: Imaging operation failed. .. /.. / Task/common/ImageTask.cpp@259: could not get the return code of the update file is returned.

  This problem has been reported once or twice for older versions of hpdm but I was unable to find a solution.

  Greetings

  To Support ThinPro 6.1 on T520, please use the 4.7 Service Pack 5.

• T520: T520 Windows 10, installs updates always up-to-date

  Iamge for T520 Win10 and deployed, clients attempt to install updates windows repeatly when turnrd, fill do Write Filter being on. What is the preferred method of diabling updates on an image of Win10? I think that the base image would have this pre configured?

  HP Win10 IoT Enterprise 64-bit Service difficulty 0001

  Description:

  This package contains a fix of service to address the issue of the Windows Update screens unexpected on thin clients of IoT Enterprise 64-bit of Windows 10 when Windows Update is disabled.
  
  These screens do not actually come from Windows Update, but use the same user interface. This fix prevents the intermittent cases where these screens appear during a reboot.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=8604911 & swItemId = vc_169708_1 & swEnvOid = 4195

• Designjet T520: Designjet T520 24 in. don't size printing

  Hello

  I try DJ T520 of my office to print a size D ANSI drawing. We bought this one a few months ago and it works fine, but I found an option that we had in our old office in isn't there anymore. I used to be able to rotate the print 90 degrees manually in the print settings. Because we have 24 in the version of the printer, I need to print the drawing in the portrait which means he needs to rotate 90 degrees, so it can adapt. Is there a way of setting this? Is this just a problem of drivers? I worked with our company this GUY to try to understand this. Thank you!

  Please see the section "Use paper economically" to the following HP web link to use the desired job rotation option:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03559791

  I hope this helps!

• Designjet T520: Designjet T520 PCA main Board

  Why the different part numbers for a 24 "and 36" Designjet T520 hand PCA Council?

  Can I interchange the two parties?

  24 "CQ890-67081

  36 "CQ890-67097

  Hello

  Yes, they use the same hand APC

  Do not use a main ACP USED, you will have other problems.

• Light client T520: t520 - how to disable the 'hp' splash screen at boot...

  Hello

  We just bought some HP t520s to complete a lab that we t510s.  The t510s work very well.  The t520s are almost here.  I just need to hide a pesky startup screen.  When the t520 marketing and gets to the GUI, but before that the network is connected, it displays a splash screen telling me that his "waitting for the network.  Unfortunately, this splash screen also has a button called "network settings."  This button, this bad boy is what I want to disable delete or hide.  I don't care if the start screen appears or not, but in giving users access to network settings and host name and all sorts of settings is a waitting accident to happen.

  Does anyone have any ideas as to how I can get rid of this button?  I would really appreciate hints, ideas, comments or words of wisdom on this topic.

  Thanks to you all!

  René

  Try the following: in xterm type regeditor, go to config-Assistant, enablenetworkcheck the value 0, enableupdatecheck the value 0, the network/update dialog box will not be displayed. You must type the value in the value dialog box and click on save before you go to the following registry key. If this does not work as expected please open a case with www.hp.com/go/support

• Thin client HP t520: thin client HP t520 occultation

  Recently, we purchased a few t520 Thin Clients and cannot be shadown using 4.6 SP4 HPDM.  We shadown t510, 5730 and 5740 devices regularly.  With devices t520, the task starts, send, process, and ends, but never opens the shadow session.

  Good news - I got it working.

  Devices t520 necessary an update of the Agent.  Once the Agent has been updated, and VNC enabled - I could also shadown.

  Thanks for your help!

• Designjet T520: Designjet T520: failure of the printer

  Had Designjet T520 about 18 months. Use it only for printing large format on roll paper. Error message: the printer failed. "There is a problem with the printer or ink system. Turn the printer off, then on. If the problem persists, contact HP. »

  Have made the procedure "on - off" several times including disconnect, allowing the printer to sit idle and then plug it in, turn on and still the same problem. I also removed and checked each ink cartridge and cannot detect all problems.

  Remove all the ink cartridges and turn on the plotter.  When he asks the ink, put them in one at a time and see if the error is displayed when only one of the ink cartridges installed.

• HP Designjet T520 color prints have strips

  The plot of a file prn in an Autodesk product: Revit using HP paper, the color of drawing a 1 4 "strips that lighten a dark color. The stripes running lengthwise through the drawing, in parallel with the wide edge of 36 "of a conspiracy of 24 x 36. If the size of the plot is changed, the bands remain 1 1 4 "wide. Spare bands natural color for 1 1/4 ", then a band that clears up the same color, then color.  No banding occurs on the black and white prints

  It's a problem of correspondence of GIS of paper Type. When a roll of HP Designjet Bright white 24lb paper is used, the type of paper bearing the same name is selected, then the file printed correctly, no strip of color - Revit and Bluebeam.

  If the paper type does not match the paper roll in the HP T520, print quality has visible lines. On the touch screen of the printer, press 'Roll', touch "document Type", "More" touch, touch "Bond and covered with paper" or read the HP manual, page 107

• Thin Client T520: Hp Thin Client Test without account 'user '.

  Hello

  My problem is that I created a new account user without administrative privileges for a long time and yesterday, I deleted the user account original (I still have the administrator and the new), but the customer never resumed. I can see the mouse, but it does not start.

  I have the Lightweight Client T520 with Windows 8.

  According to the message that you have posted, I wish to confirm that the operating system could be damaged and need to re - install the operating system on the workstation again to make it work

  This Thin Client device comes with various types of operating system by default, as shown below:

  

  Here is the link to this page: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6875922 & lang = to & cc = us

  I don't see Windows 8 (32 bit) operating system on the HP Support Site's list

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

• T520 was not able to restore from image usb

  Hello

  My T520 could not restore windows 7 image usb

  I downloaded the 3 parts of the 32 bits of windows 7 on the site of HP to restore my client light t520.

  and as it starts on the usb it defective and get the black screen with:

  Windows could not start...

  status 0Xc000000f

  initialization failed because the device is not accessible

  someone has an idea?

  Found the soultion

  You must create the image of usb drive to a computer with 32-bit operating system and no 64-bit if you make an image of windows 732-bit version.

• T520: question on memory

  From what I read, I think that this specific memory should work in a T520. Can anyone confirm or advise? Thank you!

  "Crucial single 8 GB DDR3 1333 MT/s (PC3-10600) CL9 SODIMM 204 pins 1.35V/1.5V Notebook Memory Module CT102464BF1339."

  http://www.Amazon.com/crucial-PC3-10600-204-pin-notebook-CT102464BF1339/DP/B005J4C820

  This one would work.

• Cooling Lenovo T520 error?

  Hello everyone and today I want to tell you that I have a Lenovo T520 4240-66U

  Start on my laptop reads 160 degrees. And when I start to play games or something that the processor can be using... the laptop happens to 200 degrees. MAX I saw was 215 degrees with the hard drive to a maximum of 120

  I'm really worried about my computer and I think I should buy a thermal paste.

  Any other suggestions I can do to fix my computer?

  Help, please!

  It is still under warranty? What do you use to measure the temperature? I suggest TPFANCONTROL