L70-B-126 Toshiba supervisor password problem

Similar Questions

• Satellite A100-206 supervisor password problem

  Hello

  We have a Satellite A100-206 at the office.

  A colleague trying to protect the laptop set the user password in the bios.
  I do not exactly know what she does but at startup is asked for a password.

  Then she ask me to remove the password so I typed the password, management of the bios and clear the user password.
  But it is, I also noticed that the supervisor password was already defined but not selectable (gray color).

  In any case, I've saved and restart.
  The problem is that now the OS start without asking for a password, but I can't enter the bios because it asks for a password and is not that of the colleague don't forget to have it fixed.

  Why can't I get more into the bios of th as a user?
  I also find the hwsetup in windows re set the password of the user as shown in the manual, but this software is not present.

  Best regards
  Diego

  Hello

  I put t know which operating system you have, but I think that Akuma is right. If you start HWsetup you can also access the BIOS using this tool and remove or set a supervisor password.

  You can remove the password in HWsetup?

• Satellite L300: Supervisor password problem

  I just bought a Satellite L300 and installed all the drivers from the Web from Toshiba website.

  I created the user password in the wizard from Toshiba and once I configured the SUPERVISOR PASSWORD.

  But when I tried to enter in the Bios after reboot, the work of doesen't password and in the window when trying to change the user password, it also asks supervisor password and it still says: PASSWORD INCORECT.

  What can I do?
  And why this has happened?

  Hi mate,

  I think that in this case only an auhtorized service provider can help you. If you ave you forgot your supervisor or typed wrong password it can only be removed from an ASP.

  Here, on the site of Toshiba, you can find a list of the ASP s:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Just talk with them a little and they will help you! :)

• Re: Portégé R700 - how to reset the BIOS/supervisor password?

  Hi all

  I just bought a used Portege R700 and want to reinstall Windows.
  I can't access the BIOS due to a configuration of PasswordUtility from Toshiba supervisor password. The previous owner did not provide this password.

  How can I reset it?

  Thank you

  Hi Spets

  You cannot reset the BIOS password. It must be done by the Toshiba authorised service provider. I'm sorry.

  If you need addresses and phone numbers, you can find it on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

• Update of DirectX problems after Win 10 satellite L70-B-126-

  Dear colleagues!

  Since the update of my Satellite L70-B-126 from 8.1 to win to win 10, I am faced with several graphical problems.

  I think, I realized the real problem, which is DirectX 12. I have already installed the latest drivers, but the system thinks, that the Radeon R9 265 X is no longer usable for Dx11.1. Since Win 10 installed automatically Dx12, I don't have any idea how to fix that so far.

  Useful ideas or solutions?

  All the best!
  Paul

  The game is perhaps using the Intel graphics card.

  Uninstall the driver AMD.
  Install the latest driver AMD leave AMD.com and configure the AMD Crimson software to use the AMD GPU for this executable game special.

• Satellite Pro S300 - how to enter the supervisor password?

  Hello

  I have a laptop Toshiba Satellite Pro S300-11 years and have a problem. One day, I decided that wanted to put a password for the supervisor to the bios of the laptop. Now, I remember this password, but when I have access to the BIOS Setup, I can't watch any o change option disable this password. I can't enter this password to set me a supervisor, and also I can't change some options with respect to the example, the boot sequence.

  How can I remove this password or how do I log in as a supervisor? I see no option for this, and I need to change the boot sequence.

  A big thank you.

  Hello

  On this that I can only say, check your user manual! ;)

  There, I created the following information:
  + C:\Program Files\Toshiba\PassowrdUtility\TOSPU.exe+
  + This utility allows you to do the following: +.
  + Register, remove, or change the supervisor password.
  + Create or cancel a supervisor password token +.

  Check this and then you should be able to remove the password if you know the current.

  Welcome them

• Satellite Pro A200 - Supervisor Password Setup Utility fails

  Hello

  I own a Satellite Pro A200-PSAE7E and a license to retail for Windows Vista Ultimate 32-bit Edition (with SP1) is installed.

  Before installing Vista, I have updated the BIOS to the latest version available on the Toshiba site (http://it.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?service=IT).
  BIOS version is now 2.20 - WIN32

  After the installation of the operating system, I started to install different drivers and utilities to download them from the Toshiba site.

  When I try to install the "utility supervisor password" Setup fails with a box of message that says "serial number is not valid.
  Same problem with a different Installer: "utility of Support Flash Cards.

  Someone knows how to solve this problem and what serial number is not valid?

  Thanks in advance,

  mme000

  Hello Hana

  If someone has to take care of the warning, it's Microsoft. They offer something new and they know with certainty that he could have different negative influence on the operating system running well.

  Toshiba may just try to react and change has tools and utilities, but it's not easy. you will see that soon or later Toshiba will offer updates for all non-working stuff. The same is with WXP SP2.

  By the way: interesting Toshiba on Vista SP1 - http://aps2.toshiba-tro.de/kb0/TSB84026M0000R01.htm article

  Good bye

• Need help with the supervisor password

  Dear support,

  I would ask you for help. I have a Toshiba Tecra M5 laptop and 4 years when I install it for the first time, I wonder "supervisor password". I entered my private password and everything was fine. Now, I want to change my internal HARD drive. After upgrading the HARD drive I wonder the supervisor password in a black screen directly after pressing the power button. The problem is that the suppervisor password was entered in windows mode using some Czech special characters "?" (the password is containing these characters). The portable wonder for the supervisor password using a 'back' as intrface - black screen and the blinking cursor and I'm not able to enter these characters Czechs. Can you help me how to do? I'm not able to work with my laptop.

  Best regards, Jan

  Hello

  you have the old hdd to replace to remove the password and replaced by a new one, at this time there?

• Definition of user and supervisor passwords

  I tried to set passwords user and supervisor via the Toshiba console (Security tab).
  If I register the password by entering a string of characters, I get the following message is displayed:
  "Error!" Illegal characters included in the new password".

  How can I fix this problem so I can put two passwords?

  Louis

  Hi louis,.

  There was a problem in the past that users typed a user/supervisor password on windows with special characters as a and O. When they have restarted the laptop, they were unable to type these characters because the only universal characters as BIOS area a, b, c,... are accecpted!

  Then try to use a password with 'normal' characters and restart or you try to set the password directly in you BIOS. Enter the BIOS is simple (push start button and press ESC), then you can also use the functions BIOS!

  Goodbye Chris

• Satellite A200 - 1 M 8: Bios Update 2.20 - the supervisor password has changed

  Hello!

  Satellite A200 - 1 M 8. Update the BIOS changed the supervisor password. Has been bb_aa_yy.
  If I can set this password has become?
  Details: Updated from Vista to Vista SP1. After that the hardware configuration utility does not work.

  Latest versions of the hardware configuration utility, supervisor password and some other are not installed.

  The usual message - the serial number is not valid.

  Hello

  Maybe the problem has something to do with hardware utilitly. So it doesn´t doing is even better when the error message "is the serial number invalid.", but it could be the solution to this problem.

  I suggest you to check these discussions which might help you:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=31711&TSTART=0

  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=100197

  If this works, you should be able to install the utiltly equipment and solve your problems...

  Welcome them

• Satellite A500 - 14L: utility supervisor password & remote control manager

  Hello

  I just installed Windows 7 Home Premium * x 64 * on my A500 - 14 L (PSAM3E-02N008FR) and everything went smooth, even the PVAT and install flashcards. Unfortunately, I have a problem with the following utilities (most recent versions available on the Web from Toshiba site):

  -Supervisor password utility
  -Remote Control Manager

  I installed both of them, but I can't find them in my Start menu!
  There is no setup error, but it's as if they are not installed in all.

  Can someone help me please on this issue? Thanks in advance.

  ARAMYS

  Hello

  I recommend the Toshiba Assist for supervisor password utility.
  Secure should appear in the supervisor password utility.

  Remote Control Manager improves the support for a remote control on your computer.
  I don't know if you can accede to this request, but if so then you should check it in the Panel of m.

• Satellite U400-150 - always needed, even to start supervisor password

  Satellite U400-150 /PSU45E, the cooler BIOS v4.0, just been flashed (23/07/2009).

  Well, I have a problem with the password at startup. I need to password, which should be _only_ required to enter the "BIOS". When I set the supervisor password (user is clear) I guess I should be asked for password enter or manage the CONFIGURATION of the BIOS, but it must always give me the password. To start, to start from other sources (F12) and to enter the SETUP.

  In the AWARD bios, there is an option called "password at startup: enabled". But I find not so in Phoenix. In the topic "Security" in "CONFIGURATION of the BIOS", there is an option to set a password for the 'supervisor, user, or HARD drive. I already tried all combinations, none for me.

  What I want to achieve is:

  I would like to be invited to give a password only when I enter the CONFIGURATION or when I try to boot from another deaf (hold F12). When I start the system only during the regular ignition I need not give the password.

  Could you please help me?

  > One last thing, I can still boot from another source, such as USB, DVD key, another without entering the password... what kind of security is that?

  Check this Toshiba document on:
  * What is a BIOS supervisor password? *
  http://APS2.toshiba-tro.de/KB0/FAQ9202JF0000R01.htm

  It is said clearly:
  + A password of the BIOS supervisor, used in combination with the password of the BIOS, is the second security option you have for your laptop. The BIOS supervisor password protects the BIOS settings. In most cases, the BIOS supervisor password is used by the COMPUTER system administrator in a network environment to restrict the access to certain functions of the laptop, but individual users can benefit from this additional security. For example, a supervisor of the BIOS password is adjustable to restrict access to the BIOS, to restrict the user BIOS and disk HARD or password to restrict the access to power management features. In most cases, these types of restrictions are needed in the middle to large companies. Users without supervisor BIOS password cannot change these settings.

• Tecra A10 - cannot change the settings of the BIOS with supervisor password enabled

  Hello
  I activated a supervisor for 1.50 acpi BIOS password.

  Since then, I am not able to change the settings (for example etc. - the right of the screen of the BIOS boot order does no more).
  I access the bios with pressing ESC on the boot process, then F1 when prompted "" check system, then press [F1] key. Problem is that I don't ask the supervisor password.
  There should be a prompt for the supervisor password, but it's not. So I am not able to connect as a supervisor.
  I know I can manually change the boot sequence by pressing F12 during startup, but this strict solve my problem.

  THX in advance
  elitecamper

  Have you tried to update the BIOS? On the Toshiba site, I can find a newer version that you have right now. Check it!
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before setting a supervisor password load default settings in the BIOS and then you can set the password and try again. Maybe it works.

• Satellite L670-134 how to remove supervisor password?

  Hey, I have a problem of epic.

  I was with friends in a w - LAN and then a few Trojan horses were placed in each of our laptops. Now, he took my administrator rights and set a supervisor password.
  Now I can't use my laptop more.

  Can U help me pls fast?

  You know what supervisor's password?

  The supervisor password is only to fix the Bios settings and hardware configuration.
  Mainly defined by an administrator for a user cannot change the Bios settings.
  The user can start and stop the laptop but he wants and he is able to work with the machine normally - there just need the supervisor password to enter Bios or hardware installation.

  So this kind of security and if you n t know this password, you cannot remove this
  In this case, you must contact the Toshiba ASP to remove this ;(

• Satellite Pro C660-29W. How to remove the supervisor password

  Hi all
  I've been locked out of my bios and I don't know the password. My little brother was playing with my laptop computer and accidentally set the supervisor password. Is it possible that I can recover the password or reset it? I really need to change my boot sequence as I just bought a new SSD and need to format my laptop. Suggestions will be highly appreciated.

  Here's my version of bios and details of laptop

  Toshiba satellite Pro C660-29W

  CPU Intel Core i5 2410 M

  8 GB Ram DDR3

  BIOS: BIOS FRIEND - installation utility Aptio
  BIOS system ver: 1.50
  THIS Version: 1.50

  Thank you

  Supervisor password is very important safety device and a kind of reset of the user is not possible. You can cancel it, but you must know the correct password to confirm that you are the real owner computer laptop.

  Toshiba provider in your country can help you with this. You just approve that you are owner of the laptop, and they can cancel it for you. Of course, you must pay for it.

  As far as I know, there are several techniques for the removal of password and it depends on phone model.

  Contact the closest Toshiba ASP and ask for help.