L750 satellite fails to record the external DRIVE of 1 TB as a HARD disk drive

Similar Questions

• Starts the Powerbook g3 pismo of the external drive?

  Hello, all,.

  
  

  I want to start my Powerbook G3 (Pismo) running OS 9.2.2 since the restore in one disc external hard drive. (PB knows he has a drive hard internal , but the drive does not read discs in there.) The computer goes up the disc - its own restore disk - when it comes starts with Macintosh HD as a player start, but when I try to use the restore disc as commissioning, starts to drive to go up, but the door opens. Even if I hold the door closed, the computer starts low to halfway and glued in place: first, the question mark flashing, then commissioning with Macintosh HD but then freeze it.

  This happens even if I chose as the startup disk restore disk in the startup configuration panel. This means that I can't even begin to use disk utility to clean the hard drive of the computer. I did that with two other computers (reset several times), but those who had internal functioning disks. Is it possible that I can do this computer using the external drive as the boot? I read that the G3 Pismo that allows. I know I can get someone to take out the hard disk and smash, but I expect much prefer to destroy it myself. And I can understand how to remove the hard drive, but it seems to imply a boatload of maneuvers and some tools that I have, at the present time. I would not completely destroy the computer. It would be good for recyclers to be able to retrieve some parts, though they might be useful to someone.

  It is possible that I can't boot from the restore disc in the external drive, but maybe there's something that I have not yet tried. It seems crazy that the external hard drive with the restore disc appears on the desktop with a normal restart, and I can choose as boot drive but can't seem to complete commissioning. If anyone has any ideas on this subject, I would appreciate it a lot.

  Thank you.

  Jenny

  Are you trying to boot the PowerBook to an external optical drive that is connected to a USB port or your external drive connectivity FireWire?  If it is USB, that is the problem.  The reading of an optical drive connected by USB is one thing, but start since it is a different matter.  Unfortunately, your Pismo is not capable of this.

• New itunes install. All the songs are on an external hard drive. A lot of songs do not show up in itunes, but they are in the folder on the external drive.

  This seems to be a common problem:

  Recently I had to reinstall Win 10 & then itunes. All the songs are on an external HD iTunes does not show a large number of songs that are in the folder on the external drive. I copied the .itl to the new itunes folder. I also tried holding down - from itunes shift - select a library. Any ideas how to be able to see the songs in the itunes on the hard drive folder in the itunes library?

  Thanks in advance

  Steve

  See make a library of portable split. Have you copied the correct .itl file, or should you connect an external hard disk .itl file? If you can find the correct .itl, it should have all your songs and playlists. See the empty/corrupted after upgrade/crash iTunes library when the library has been altered for the first time with the new system. If you have to start creating your new library in an iTunes folder to the root of the external drive and move all the media inside... \iTunes\iTunes Media before adding to the library.

  TT2

• How can I initialize with a previous osx of the external drive?

  About 4 years ago I installed Snow Leopard on an external drive while I was running Snow Leopard on the main drive. I wanted to load a lot of video on this player to be able to use the version of Snow Leopard of iMovie when I updated the main drive. However, when I upgraded to the Mavericks (recently in Yosemite), he would list is no longer the disc of Snow Leopard when I pressed down option. And when I went to preferences/Startup and chose to start with Snow Leopard, it would not be completed the boot process.

  If I use disk utility and create a partition to use for initializing with Snow Leopard, space-how much should I assign this partition? The external drive is 1 t and it is full of 50%.

  Also, I have a 500 GB internal drive I removed a Mac deceased and put in an envelope. There are also Snow Leopard. After the partition is created, can I exchange the two external drives to be used on the same partition? What I want to do with the box HD's boot up with it, then install Mountain Lion.

  I want to give to anyone who helps me the credit, but I have 3 questions under one heading. Is there a way to get triple credit?

  I'm starting to get lost with all these drives, partitions and 4 versions OSX.

  I wonder what happened to your old Snow Leopard.  You always use the same computer that you used with Snow Leopard? A Mac can start only in the operating system with which it is originally came or newer.  Your profile information from computer to the bottom of your post mentions a 2012 MacBook Pro which is not a Snow Leopard machine.

  How much space depends on how you'll use it and how you configure.  I would like to make at least 30 GB so there is a little space, wiggle but if you start to install the applications then 60 + GB.

  I know most recent disk utilities are supposed to be able to resize partitions without erasing but I'll make sure you have solid backups first.

  You can assign a 'resolved' and two "helpfuls".

• Satellite Pro 4600 - installing the Audio driver for Win98 SE

  Hi all

  I m new here.

  I have a Toshiba Satellite Pro 4600 abandoned and I put Win98 SE edition on it.

  The problem I have is I can download the audio driver, but when it comes for her, he asks me a yahama cd that installs, I think its 4 or 5 drivers from the cd. I currently do not have this cd so I was wondering how to get around this problem.

  Thank you for reading

  Tony

  Hello

  I found the Win 98SE driver sound for the Satellite Pro 4600 on the European driver Toshiba page.
  You have to look in the folder to ARCHIVE.

  http://EU.computers.Toshiba-Europe.com-> support download &-> download drivers

  He choose: * Archives-> Satellite Pro-> Satellite Pro 46xx-> Satellite Pro 4600-> Win 98SE *.

  In addition to information of Yamaha audio driver, you can find these details:
  + A wide range of audio controls are possible using this audio driver, including: Software Synthesizer, the microphone volume, 3D development and management Power +.

  So I think that this driver should help you!

• Is it possible to restart El Capitan of the external drive on my iMac?

  Is it possible to restart El Capitan of the external drive on my iMac?

  Gene,

  Yes, it is possible. If you are having problems, read Re: El Capitan refuses to boot from the external drive for a few possible reasons it may not work.

  

• Satellite Pro A10 - installing the audio driver on Win XP

  I have a computer Satellite Pro A10 and the audio driver is not respected my model above.
  Please send me the audio driver and I have installed window XP
  Thank you

  I found the driver on Toshiba download page...
  http://support.toshiba-tro.de/tools/SatellitePro/spA10/win-XP/sound-SPA10-XP-512013542.zip

• When you drag the file on the external drive I get the error code-43? What it means? How to fix? Thank you!

  When you drag the file on the external drive I get the error code-43? What it means? How to fix? Thank you!

  Restart the computer and try again.

• How can I CREATE an iTunes library on the external drive of Thunderbolt

  I am creating an iTunes library for music & movies on an external hard drive LaCie d2 Thunderbolt 4 to. I copied all my movies on external hard drive, but cannot create a name of folder that iTunes will recognize that the library. I have a new mac mini OSx EL Capitan facility, there is NO file (movie or music) stored in the iTunes library on mac. I don't HAVE NO copy the old iTunes library since (OS crashed) & I want the external drive to the library. I tried several times to iTunes directly on the external drive, but it does not find the movies. (This is the file created: Volumes/LaCie/iTunes:iTunes Media), & this is the name of the folder on the LaCie external drive I am trying to get iTunes to serve library (iTunes/iTunes Media). I searched for hours to find info on this, but each article explains how to MOVE or COPY the old library (create a). I am over 50 years & not a computer guru, so please do not criticize my ignorance & please be more specific on the steps to go through as possible! Any help would be greatly appreciated! Thank you.

  Launch iTunes with down option, click on create a library and drag the movie files in the Finder in the application window open iTunes or automatically add to iTunes folder.

  (137697)

• Since I downloaded El Capitan I think I can't paste it into my external hard drive.  I use to download my card reader, copy it, and then download to a new folder on the external drive.  It will not work now and nor can I create new folders on the hard dr

  I used to download pictures from a card reader, copy them, and then stick it on my external hard drive.  Since El Capitan of download, it does not work - I can download and copy, but can not stick to the external hard drive.  I can't set up the files on the external hard drive either.  However, I can download what is already on the external hard drive without any problem.

  How the external drive is formatted?

• Can't burn music on the internal CD player so how do we change to use only the external driver to burn CDs?

  My CD drive doesn't work, so I bought an external CD drive.  I can rip music from the new drive, but when I want to burn I don't have the option to burn on the internal drive that no longer works.  How can I switch (permanently) to my external CD drive?

  Hello

  · What is the number and the model of the external drive that you use?

  · You use windows media player to burn the disc?

  · If so, what is the version of windows media player on the computer?

  You can check the link below: how to copy music to and from an audio CD in Windows XP: http://support.microsoft.com/kb/297015/en-us

  How to copy information to a CD in Windows XP: http://support.microsoft.com/kb/306524

• Window Vista Ultimate 2007 backup files empty on the external drive.

  The computer is a desktop HP running Windows Vista Ultimate 2007, 32 Bit OS, RAM 400 GB and Intel Quad CPU 2 .4GHz.

  I ran Windows Vista backup for a full backup and a backup of the file.  When I look at the external disk to verify the backup files are empty.  There are two created on the external hard drive, but both files are empty.  The program indicates that the backup routine successfully on the external drive. I have not received any error message.

  I use a Toshiba external drive with 500 + GB.  I have a lot of room.  I tried twice.  The first time I reformatted the external drive using Windows and revived the full backup only.  Once again the image file on the external drive shows 0 bytes, 0 files.

  I wonder why the backup files are not getting moved on the external drive.

  Hi BEM Consult,.

  1. are you allowing Windows to choose recommended backup or you choose "Let me pick" option on the backup configuration window?

  We recommend that you connect the external hard drive on another computer and check if the size of the backup file is in the list.

  Check if you have selected all the items in the backup settings to create a backup file. Try to create a new backup file by selecting all items on the Backup Wizard and check the result.

  See set or change automatic backup settings

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista backup on the external drive stopped working

  I have a LaCie 750 GB hard drive external (total size 698 GB) who I've been saving my drive C and D to a Dell XPS 410 using Vista Home Premium software.  He contended until the end with a backup automated on-demand for once a week.  He performed the backup 30 times since 11/09/09, but sometimes did so sometimes (shorter range) other than the weekly on-demand.  When I compare the total size with the free space on the external drive and my drives C and D, the amount of used space is respectively 131 GB, 5,11 GB and GB 665,5.  I am not very computer savvy, but if the backup program backs up only what of new each time, why used on my external drive space is so superior to what is still on my C and D drive?  I assumed that the backup software would just copy the previous backup, each time that a new backup or write on the oldest backup, but apparently is not.  So now all I get are messages saying that the backup was not successful because a file was in use or something to that effect.  I'm doing something wrong or do I have to reformat the hard drive external when it is "full" to start the backup of my computer again?

  Hello
   
  Your assumption is correct. Cross check if a new backup is created and saved in the external hard drive. If a new backup is not too write the old backup, the use of the space will be very high.
   
  Two particularly useful automatic backup features are the ability to do a scheduled backup and the ability to save your files.
  We recommend that you cross check if backup settings are intact. To do this, try the following steps.
  1. open backup and restore by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then clicking the backup and restore.
  2. click on change settings.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
  For more information on "back up and restore: frequently asked questions" visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions
   
  You get the error message, unplug the external drive and restart the computer. Connect the hard drive and check if you get the error message.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• The \Driver\WUDFRd failed to load the device driver USB\VID_0483 & PID_2016\5 & 295bd535 & 0 & 2.

  WUDFRd failed to load of the device

  Hello

  I did a clean install of Windows 7 64 bit and everything goes fine until I started to add the specific drivers of lenovo t61p.  I get the following in the Event Viewer error message:

  The \Driver\WUDFRd failed to load the device driver USB\VID_0483 & PID_2016\5 & 295bd535 & 0 & 2.

  After a lot of Googling, I found that the usb device is a fingerprint reader.  remove the fingerprint reader drivers removes the error in Event Viewer.

  AuthenTec TouchChip fingerprint coprocessor uses the v1.5.0.289 driver.  their website States that the error is a problem with Microsoft.  See this link:

  http://support.AuthenTec.com/Knowledgebase/KBview/tabid/843/ArticleID/443/WUDFRd-failed-to-load-for-the-Device.aspx, or search their Knowledge Base for "WUDFRd failed to load for the device.

  I see that the other members of the forum answers have similar problems, but they still have to find a solution.  is that someone in Microsoft could provide an update for a fix?

  Yes! After two years, I found a solution.  I installed a previous version of Lenovo sw fp and it fixes attention on win 7 sp1 2 t60.  I've been running for about 3 weeks and warning went on two PCs. then, download and install IN1FGP08WW1.exe.  It is fp s-o of Lenovo in UTEK and there the pilot to clear the warning.  BUT it's not as safe as the current Lenovo sw fp.  Apparently, she was abandoned when authentic bought UTEK because of this.  as I understand it, if someone has physical access to your pc they can decifer pw of windows in the registry.  This isn't a big problem for me.

• Computer tries to boot from the external drive

  I use a desktop computer with Windows 7.  I have an external hard drive connected as a backup drive.

  While booting, the computer tries to boot from the external drive and nothing happens.

  In order to get the machine to start, I have to unplug the drive hard Ext., which is a waste of time.

  I would like to back up on the drive internally the computer c:

  Is there a way I can stop trying to boot from the external drive?

  At the start of the pc, open the BIOS, usually output tab, search (priority boot device), set C: 1st, 2nd or 3rd external

  Save and exit. Also, more need of HDs to put in shape before using it, most come in a "raw" State the mfg