L7580: HP All In One L7580 - Scans but will not print or copy

Similar Questions

• ALL-IN-ONE PHOTOSMART HP 5510 WILL NOT PRINT AFTER GO 'SLEEP' MODE

  My printer model:

  HP PHOTOSMART ALL-IN-ONE 5510 B111A

  Problem:

  Printer goes into sleep mode. After 25-30 minutes breaks the connection between the PC and the printer wireless. Beacon wireless is the same fashionable "sleep" and I see that the printer is connected to my router and there is internet connection. HP Print and Scan doctor sees the printer, but I can't wake the printer unless I restart it.

  What I've tried so far:

  I tried all the solutions offered hp.com; Reinstall driver, updating the printer software, setting static IP on the printer, static DNS servers, using HP print and Scan doctor.

  I've seen people questioned on this issue before and there is no solution. I really need help from HP!

  After days of research, the problem was finally solved! I applied the following steps below. Some steps may be unnecessary, I didn't waste my time knowing who.

  1. find your PC's DNS servers by typing ipconfig/all in CMD.
  2. assign a static IP address outside your DHCP range. For my Linksys router him between 192.168.1.100 to 192.168.1.150. So I put my static IP address as 192.168.1.20.

  To do this, click the button on your printer wireless. This will show the IP address of your printer. This type of your browser. Go/network/network address. Choose manual IP and write 192.168.1.20

  3 now come to section of the manual DNS server, and then type your DNS servers, you found before.

  4. open your HP printer program that must be installed with your driver. Utilities hit and update the IP address. Update your address with your static IP address.

  5. now go to your router settings. Find the wireless settings and change your not automatic standard 20 MHz radio band.

  6. change your standard channel to 6.

  7 find the wireless security and replace your WPA-personal security mode.

  8 disable UPnP

  9. This is the part of the KEY. Change the renewal of your key to 36000 seconds. (10 hours)

  10 go to the Windows Advanced Firewall. Enable all the disabled printer and share, entrants and outbond rules.
  I believe that the most important parts are affecting a static IP address outside your DHCP-range and change the key renewal time. I hope this works for you too

• F4135 print on screen, but will not print a copy of the glass

  I can not print a copy of a copy, but it can print from the screen image. How can I fix it? He started just after working well for a while.

  I'm glad that you were able to get your printer to start to make a copy once again, Muzzik.  If this proposal does not work, first check all your ink levels.  Black test consists of all colors that come together to make black.  It is a process that occurs when you print from your PC.  The letter 'e' indicates error with your photo in black and.  It could also mean your ink cartridge door is open according to the document below, but then it would print at all if that was the case.

  -Flashing lights-

  Let me know if you have problems with your ink cartridge.  I hope this helps!

• software and star driver hp psc 1315xi all-in-One extracts full but will not load on xp sp3

  Can not find a way to get this to install. After extracting I finally found it in running %Temp%. Searching through all files and folders, trying to find the exe file. to get it to autorun, but was unsuccessful. I tried to install this on 2 different PC with xp pro sp3 but no luck.

  The solution below is from michael323 here in the Forums of HP's Support.  Make sure that you send Bravo!

  I think I have solved this problem.

  I have a PC Windows XP Pro (SP3) who has been affected by this problem.

  Immediately after that the window of 'extraction' went to 100% and closed, nothing happened.  The windows install/never display software.

  Whenever I tried it creates a log file that started with this:

  "Parsed command line: «.\Setup.exe".

  Using datfile: C:\DOCUME~1\xxxxx\LOCALS~1\Temp\7zS1293\autorun.inf

  # GetValueByLang (f-> c_str(), _T (Version), _T (LanguagesInthisCD) failed "

  System LangID = 1033.  mapped to ENU

  # The system language is ENU, but is not on our CD!

  There was other error messages after that, but they all come from lines 3 and 5.

  Something she prevented the installation program to recognize the language ENU files ARE present in this download.

  Comparing two PCs, a problem, and one that works perfectly, I saw that one who was not was AutoRun disabled through a registry setting.  I temporarily deleted this registry on the PC that wasn't and Setup launched and ran like he was supposed to.  Here are the first of this log from the same PC, a few minutes later, where the only difference was that I had removed the registry setting criminalized:

  "Parsed command line: «.\Setup.exe".

  Using datfile: C:\DOCUME~1\xxxxx\LOCALS~1\Temp\7zS1293\autorun.inf

  System LangID = 1033.  mapped to ENU

  We use the system of language = FRA, which is located on our CD!

  As you can see, the message "(LanguagesInthisCD) failed" (line 3) disappeared, and the line 5 (now line 4) shows that it has to recognize that the language ENU installation files are present.

  So if you encounter this problem, and you are comfortable with the system registry, here is how I got it to work on my PC:

  Start regedit
  Navigate to the bottom of this tree
  -HKEY_LOCAL_MACHINE
  -SOFTWARE
  -Microsoft
  -Windows NT
  -CurrentVersion
  -IniFileMapping
  Below, find out if there is a key named "Autorun.inf".
  On my PC (the one with this problem) the value of this key has been "@SYS: nexistepas".
  If your registry database also has this, it may be the cause of your problem.
  In the left pane of regedit, do a right click on Autorun.inf and select "Rename" from the context menu.
  Change the name to something like "Autorun.inf.hold".
  Close regedit
  At this point, I restarted my PC, but I don't know if it is really necessary.
  I ran the downloaded driver file.  It extracted, and the Installer started out as it was supposed to.

  When it was done, I returned in regedit and renamed "Autorun.inf.hold" to "Autorun.inf".

  It is extremely frustrating for me, and (if you need it), I hope that this solution works for you.

• HP Deskjet all-in-one: HP Deskjet 3520 will not print black, period

  OK, I've lost my WHOLE day, searched forums, has done what others have tried, poste posted HP Facebook, doing whatever is humanly possible to get my printer to print in black. I ran the clean printhead, black ink changed TWICE new cartridges, reloaded drivers, reset the default open to the top of the printer and tried to manually clean the head after only 4 hours to do everything I can possibly do to get this junk to print in black. The printer is only a year old and the cartridges are freshly bought from the store. So, tell me what am I missing or is the printer ready to be stoned?

  Hi @ChrisBird,

  Welcome to the HP Forums

  Looks like you've covered most of the steps, but I will propose always to have a look through this document printer prints blank Page or not printing black or color ink for HP Deskjet Ink Advantage and Deskjet 3520 e-all-in-one printer series to ensure that you have verified that the event on both cartridges.

  If this does not help still nothing and will not always be the black print, please call our technical support team and request a replacement printer. At THAT TIME, regardless of the warranty, they should be able to establish that the replacement for you. Otherwise, let me know and I'll do my best to help you with a resolution.

  The pleasure of you talk to soon!

• HP Officejet 6500 E709a series will scan but will not print

  I got a HP Officejet 6500 E709a Series for about 4 years now.  After a few months, it seems "loose" the ability to print.  It can scan via the USB of my laptop Toshiba, but won't print documents.  I had it works but has recently done a Windows Update (Win 7) and on the side of the printer to stopped again.  I tried all the options troubleshooting including uninstall of the printer and allowing windows to find and automatically install it but no good.  Then, I made an update of the driver printer full of windows and tried with the latest dirvers HP Officejet 6500 E709a Series, but still not good.  The printer is connected directly to the laptop - without hubs etc. What can I do now?

  Finally got the problem solved thanks to printing HP and doctor Scan to http://support.hp.com/us-en/document/c03275041. Well worth a visit!

• MX340 wireless scan but will not print wireless

  I had this printer running on Win 8.1 for some time and had never been able to get wireless working.    I was delighted when I met recently with the fact that Canon had finally provided drivers for win 8.1 so I installed them.  I set up the wireless and has been able to analyze something wireless.    I try to print at this time, but later (overnight?) I tried to print and it tells me that the printer is disconnected.   It will scan without plugging in to my laptop but it seems to connect properly.   The scanner and the printer work with two different wireless connectors?

  It's very frustrating because I use the laptop in the House and I could really use the wireless function.   It prints without a problem with the usb connection.

  Windows 8.1

  I tried all versions of the printer I could find available (2), but that doesn't seem to make a difference.   I solved my problem by uninstalling all versions of my canon printer and all the drivers and programs that I could find related to these printers and starting from scratch.   Not sure what I did differently this time, but I am now able to scan and print wireless.   Yes!

  Thanks for any help.  (took me a while to get to this...)

• HP Photosmart estation C510 on Windows 7 scan but will not print

  I have a HP Photosmart C510 Windows 7 Home Premium 64-bit-based station.  I moved our office where she operated 2 months ago very well.  I can't send a print job to the printer and it reads print but is just idol.  I can scan a document very well.  I loaded and unloaded the software 4 times.  I bought new ink cartridges and install them as well.  I removed the print head and cleaned it and the contacts at the back. I tried the diagnostic tool at least 10 times, and everything indicates that the printer is ready and no problems found. I tried troubleshooting on windows and it shows the status is fine.  I used the HP convenience store and status show ready for use.  I checked the Device Manager, and no abnormalities.  I spent at least 20 hours on this forum, try to find a solution and try each and everything I could find that still resembled a possible fix.  Before I throw this machine on the street, I would like some help that I paid a lot for the machine, but I have to be able to do more than scan with it.  I read a lot of many post of some truly smart people then you are my last hope line.

  I understand now.  Would you be interested to try a full reset which should put this in 'as new' condition or you have done that already?  There is nothing that is in any document on the internet and I will have private message it you if you want to try it.

• HP 8600; Printer says it is ready for wireless printing, but will not print my documents. It prints all the pages of the test very well. What I am doing wrong?

  Printer says it is ready for wireless printing, but will not print my documents. It prints all the pages of the test very well. What I am doing wrong?

  Contact HP support.
  http://h10025.www1.HP.com/ewfrf/wc/pfinder?cc=us&DLC=en&LC=en&tool=&query=8600#n251

• I have Lightroom on my iMac and MacBook Air, I just new MacBook Pro, all migrated to Pro air but will not work Lightroom until I have disable it on the Air.  HOW CAN I DO THIS?

  I have Lightroom on my iMac and MacBook Air, I just new MacBook Pro, all migrated to Pro air but will not work Lightroom until I have disable it on the Air.  HOW CAN I DO THIS?

  There is no such thing as disabling Lightroom 5.7. Just uninstall the software.

  Looks like you have installed 6 Lightroom on two of your computers (including the MacBook Air). In this case, you must find and launch Lightroom 6 (not Lightroom 5.7 or any other version of Lightroom 5) on the MacBook Air and then in the menu help, select logout.

• my hp desk jet f2480 will copy but will not print blank pages only

  my hp desk jet f2480 will copy but will not print blank pages only

  Hello chevy-123

  Please try the following article, he can help solve your problem.

  Printing blank Pages

• LaserJet MFP M127fw Pro: Scanning but does not print: print jobs that are just sitting in the queue

  I tried several fixes and nothing has worked.

  Uninstalling the software and printer and reinstalled from scratch.  Can see and scan, but never leave print jobs queue on the laptop

  HP Print ran and doctor Scan.  Could not get out print job, it becomes its own test in-house printer print

  I use wireless.  I tried as well to turn off wireless and use the wire and still get the same results.

  Hello

  I think you need to delete the queue. For Windows, try it please:

  Hold down the Windows key and press R.
  from the run window, type services.msc and press to enter.
  If the computer asks you to Admin, you have to accept that,
  regarder watch down to the print spooler service, right-click and select Properties
  Click the Stop button,
  Go to C:\Windows\System32\Spool\printers or C:\Windows\System\Spool\printers
  delete the job inside this folder
  restart the machine.

  Kind regards.

• Laser Jet Pro CM1415fnw, can scan, but do not print

  It will not print documents in the queue.
  It will scan very well.
  I ran shoot poorly, but not response.

  I have also a HP Office Jet Pro 8600 in my network and when I designate him, it works very well as a scanner and a printer.

  I ended up going in "start" / devices and printers, right click on the printer icon, then 'see whats printing'. "."
  He says that the printer is "offline".
  I clicked on 'printer', came down to "Printer to use in offline mode" and took the box out of the box.

  My printer is back online and start working.

  Thank you

• Printer says I have ink in the cartridges but will not print black

  I have an HP Photosmart Premium C309g-m.  I am frustrated because for now, it will not print anything black.  The color setting shows that I have sufficient ink in all cartridges, including the ordinary and photo black black.  Should I assume that I have a bad ink cartridge (even if it was printing without problem), or is a printer problem?  I ran to the print head clean definition, but it did not help.

  It could be the cartridges, but I doubt it.  What you can try, is not this video, I'm going to the link below and also Bob Headrick printhead soaking.  I hope that will fix him

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/how-to-troubleshoot-print-quality-problems-video/m-p/4029104#M48162

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/HP-6500-Office-Jet-E709a-black-printer-cartridge-HP-920-not/m-p/447545#M36315

• Updated but will not print pages from the internet

  I had AdobeX, but he refused to print anything from Firefox, not even a selection. I deleted and I went back to 9.4, but it STILL will not print for me more. How can I fix it?

  OK, I got it - it turns out that the upgrade has changed the default printer in the settingds for Firefox... I won't go back to 9 or X however, as others seem to have hurt, too.

  FIXED - FIXED - FIXED