L830 satellite - Bluetooth cannot connect after installing Win 7

Similar Questions

• Satellite 2210CDT: two problems after installing Win XP

  Hello! Maby it sounds funny but I found Toshiba Satellite 2210CDT inside my closet, installed Windows XP (oem supplied with the mouse, I bought some time ago) and it works!
  The only problems I have are:
  * When the system is in hibernation, it is impossible to 'wake up' (I remmember in Win98 in this laptop there is problem);
  * I don't really have the tools provided with Win98 came with the laptop (ie.battery status and so...)

  Appreciate the help, Mike

  PS sorry if I post in a bad place in the forum, but this is my first post (I hope you can understend...)

  Hello

  Satellite 2210CDT is an ancient and you should be lucky that Windows XP runs on you laptop.
  But this unit has been designed and delivered before the era Windows XP started.
  I checked the page of the Toshiba driver and there is no drivers for Windows XP. I found drivers only for W2k and Win98.
  Unfortunately, if you use the Win XP on your laptop you must do without drivers Toshiba, tools and utilities.

  I found a utility to do Hibernation for Win98 on the Toshiba site. I think that this is a utility that is important to use the hibernation mode. But as I said, it is available for Win98.

• Cannot retrieve the Satellite to factory settings after installing Win XP

  I was running windows recovery then I chose 'delete all data... '. "something like that.
  Then in the Middle by mistake I turned off the system.

  After that, I tried to start windows so was in error "missing operating system". I managed to install WINDOWS XP, so I could access HDD RECOVERY but nothing happened.

  I tried pressing the "F8" key and also the '0' key when the computer starts to "toshiba" logo but it is still not send me any option to get my computer back to windows vista or you can say "out of the box.

  One important thing is, while installing windows XP its show me this HARD drive recovery exist and 973 MB is free off 5665 MB. This means that I have still all windows and the drivers on the HARD drive. Now please help to return normal system recovery or BOX STATE.

  > After I tried to start windows so was in error "missing operating system". I managed to install WINDOWS XP, so I could access HDD RECOVERY but nothing happened.

  The installation of Win XP has damage and remove the Boot Manager and options preinstalled by Toshiba and backed by Toshiba picture.

  This means that if you will be unable to retrieve the device using the drive HARD recovery option.

  You could retrieve the device back to factory settings using only the Toshiba recovery disc! But I guess that you didn't create this disk is good?

  Well, in this case, you can order this disc from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Cannot connect after install

  I just bought a new SSD with the intention of doing a fresh install of Windows on it. I downloaded Windows 8.1 installation directly from Microsoft Media on a USB key. I went through the installation, and it seemed to work perfectly well. However, when I started to install programs, I am essentially impossible to restart the computer. When I do, it attempts to load the login screen, but it is completely empty. I tried to reinstall Windows, and I am able to restart perfectly fine right after it loads everything first... but every time I try to install anything (Windows, Chrome, graphics drivers updates, printing software, etc.) he comes back to the same problem when I restart... screen empty, unable to do anything, much less actually connect. It is the first time that has happened for reinstalling Windows and I am quite lost.

  Hello

  Thanks for posting your query in Microsoft Community.

  I can understand the feeling of not being able to see the machine how it should work and I'll be happy to answer your query. Let me ask you;

  1. What is the brand and model of the computer?
  2. How did you create installation media for Windows 8 (which is the link/URL)?
  3. When you say new facility, do you mean clean install?
  4. Which operating system was installed before Windows 8?

  I suggest you to follow the steps below and check.

  Step 1: Please refer to the following and create the installation media for Windows 8.

  Create an installation media (DVD/USB) for Windows 8

  Note: You should have the product key for Windows 8 to create installation media.

  Step 2: Start to the recovery environment with installation of Windows 8 media

  It is another way to boot the PC and launch recovery tools when something goes wrong with the operating system.

  Please follow the steps below. Insert the DVD to install Windows 8 on DVD-ROM and restart your computer.

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  (b), select the exact time and the type of keyboard.
  (c) click on repair your computer in the lower left corner.
  (d) select Troubleshooting to Choose an option screen.
  (e) click Advanced options in the form of resolution of the problems .
  (f) click Auto repair of Advanced Options screen.
  (g) following, choose the operating system by clicking on its button.
  (h) Windows 8 will then look for problems on the hard drives and verify that all required files are intact.

  Step 3: The restore of the system on the Advanced Options screen

  System Restore to restore your computer to a previous state, quickly and easily without losing any of your files and personal settings. Sometimes when you install programs or drivers, they can affect some system settings and prevent other programs to function properly. You can use system restore to restore these settings to their previous state.

  You can follow the steps:

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  (b), select the exact time and the type of keyboard.
  (c) click on repair your computer in the lower left corner.
  (d) select Troubleshooting to Choose an option screen.
  (e) click Advanced options in the form of resolution of the problems .
  (f) select System restore.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  Do not hesitate to write to us in case you have any problems/concerns while working on your computer, we will be happy to help you.

• Portege R830 - problems of 3G connection after installing Win 7 32 bit

  Hello

  I went down a Portege R830 Windows 7 64 bit for Windows 7 32 bit with drivers of Toshiba. I put a SIM from my provider.
  In the windows Network Manager, 7 and in the Toshiba Wireless Manager I can see the right provider and HSPA network but when I start the connection, it does not (I don't have a PIN code).

  It is failed with Windows 7 Network Manager and Manager Toshiba wireless (I don't have this problem with the Portege R700 windows 7 32bits)

  But I found a small solution (but I think that's not enough):
  I have created a dial-up connection, with a number * 99 #,.
  I started the connection, it does not happen, but after that, when I raise my first connection is good.

  I don't know why, it's as if the modem is in sleep and the dial-up connection wake-up the modem, because after all is good (win7 Network Manager, Manager wireless Toshiba) so if I reboot the Portege.

  I want to avoid the dial-up connection on my r700 portege with 32-bit windows 7

  Thanks for your help and sorry for my English.
  support for the toshiba told me to reinstall windows 7 64 bit to solve the problem :)

  Hello

  Are you sure that you have correctly configured the connection?
  Here is a nice FAQ that explains step by step how to connect 3G using the Toshiba Wireless Manager:

  + How to configure and set up a 3G connection via the preinstalled Toshiba Wireless Manager +.
  http://APS2.toshiba-tro.de/KB0/FAQ1A037W0000R01.htm

  and here you can find instruction how to create dial upward of connection using own configuration of Windows.

  + How to create a Dial-Up connection with 3 +.
  http://APS2.toshiba-tro.de/KB0/HTD9802OF0000R01.htm

  Recommend check them both!

• Satellite L300 - no sound after installing Win XP

  Hi all

  had to install xp because vista is not good for me. the system does not install sound card drivers, and Device Manager, there is no listed his card.
  I have yellow? marks on "PCI Device" I think it's the soundcard and "network controller".

  I searched this forum and got some results that looked like they can solve the problem, but unfortunately the recommended fix was removed by Microsoft.

  * Before would be to install the audio driver, you must first install the *.

  * KB888111.* and AUDIO KB835221 hotfix
  * Here are the patches from Microsoft. Search the net for download *.

  * After installation, restart the operating system, and then try to reinstall the driver sound again.*

  Microsoft, still have KB888111, but no KB835221, as they claim that it has been proven to fail!

  any ideas?

  very appreciated

  g

  Here is the link to the missing patch.

  http://files.FileFront.com/kb835221exe/;9494950;/FileInfo.html

  Hope this helps you.

  Thank you

  John

• Samba75 USB Modem GPRS/EDGE cannot connect after installing Vista SP1

  Hi all

  I have a laptop under Windows Vista Home Premium. I can't connect to the Internet using my right to Samba75 USB GPRS/EDGE modem, once I installed Vista Service Pack 1.

  Any idea on how to solve this problem? Because of some network security options has been added by SP1 of Vista who refused to connect me with my modem?

  Kind regards.

  Hi Ken,

  Thanks for the reply.

  I found that the services required to support the diap network are some corrupted how (in other words, when you enter Services, you can start/stop/restart the service. all options is disabled). I'm not looking for is the first cause, but I think so. FYI, I already turned off all firewalls including Windows Firewall.

  I will fix this by reinstalling a new copy of Vista. Tired of the trousbleshooting.

• Satellite U300 - no sound after installing Win XP

  Hello

  I just reinstalled windows xp Prof today and upgraded to service pack 3.

  Sound has worked well in the first until a reboot, no more noise.
  A few reinstalls the drivers now, sometimes he says its all installed fine, other times it says no audio devices installed.

  In both cases there is no sound...
  Sometime on a restart (many reboots today) the sound suddenly came back to life, to die again at the next reboot...

  Im hoping someone can help me with this problem cos Im leaving on vacation tomorrow and really need my sound ;)

  Thanks in advance!

  Hello

  You should on Windows XP two audio patches if you have a card high definition audio:
  http://support.Microsoft.com/kb/835221
  http://support.Microsoft.com/kb/888111

  These updates are in integrated SP3, you must install Service Pack 3 or the updates first, then the audio driver. So in your case, I would like to delete the sound driver, use CCleaner and then install the latest version from the Toshiba site.

  Good luck!

• Can satellite A300d-16W - I use HARD drive recovery after installing Win XP?

  I formatted my PC and installed XP. Can I reinstall Vista using HARD drive recovery?

  > I formatted my PC and install XP

  No, you cannot use the recovery HARD drive after installing Win XP because looks like you have formatted the HARD drive and the HARD disk partition has been erased.

  So you need to use the Toshiba Recovery disk that I hope, you created before you formatted the HARD drive.

  Greetings

• R850-14 t - FN feature satellite lost after installing Win 7

  Hey,.

  After Installing Win 7 32 bit, I had no functionality of FN.
  I tried to find and also tried some drivers on the homepage, but I don't have the right one.

  If some know what driver I need exactly?

  Thank you!

  Hi mate

  Did you install VAP (value added package)?
  If this is not the case, to do this. After that, restart the laptop and check the functionality of the FN button.

  If the FN button would not work, install utility Support Flash Card which you could find in the box driver for other portable computer laptops; for example L500

  Greetings

• my Bluetooth cannot connect to my shoqbox

  connection come with a pop-up alert indicating that "Audio driver is not available, please make sure that the audio device works properly.

  Edit:

  Re: my Bluetooth cannot connect to my shoqbox
  Thanks for the reply. tried the methods you suggested but no luck. The pop alert is that when I try to connect my Philips Shoqbox Bluetooth speakers to my laptop. on its own my phone have no problem with the sound, it works very well. Just to tell you in my page of my Shoqbox Bluetooth device is associated.

  		Re: my Bluetooth cannot connect to my shoqbox SEE SLIDE SHOW DOWNLOAD THE SET This album has 3 photos and will be available on SkyDrive until 07/07/2013.

   

  Hello

  As the problem seems to occur only when you connect the Philips Shoqbox Bluetooth speaker to your laptop if you may need to install a driver for the same that is missing or a utility.

  Contact Philips support so that they could help you with this problem.

  http://www.USA.Philips.com/c/audio-system/black-8W-sb7200_37/PRD/en/;JSESSIONID=1D21084BD91239AF8C44EFC0204D96E9.app121-drp2?t=support

  It will be useful.

• Satellite A200-1AX: card reader SD and BT do not work after installing Win XP

  Hello

  About a year and a half, I bought my laptop Toshiba Satellite A200-1AX and I'm very happy with it.
  It had Vista on it. For this OS, my SD slot worked, but I don't know the bluetooth because I don't use it.

  Some time passed and I removed Vista and now I have Windows XP with sp3.
  All right, but the SD slot does not work. Bluetooth does not work as well and it is not listed in Device Manager.
  I tried Toshiba Bluetooth stack, and when the installation reaches the driver part it does not move.

  Here's a screenshot of my device manager:
  [http://img22.imageshack.us/my.php?image=devicem.jpg]

  Those with question marks is not supported by XP as I know, correct me if I'm wrong.

  Hello

  Satellite A200-1AX belongs to the PSAE6E series.
  It s equipped with BT module so after installing battery BT BT should work correctly, you need to activate using the FN + F8 keys.

  Regarding the housing of card reader SD;
  You must install the Flash Media Driver for Texas Instruments. This is the driver for the Bridge Media Slot. This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

  By the way; the BIOS must be updated after the installation of Win XP. There is a version of BIOS (5, 60-WIN right now) that is specially designed for Win XP

  Good bye

• Re: Satellite A200 cannot connect phone - no. Bluetooth

  A few years back, I bought a Satellite A200 (PSAF6A-OWOOIN) running Vista, which my daughter has since upgraded to windows 7.

  The laptop had previously Bluetooth connectivity for my mobile phone (not that I've never used),
  However (now that I need) I can no longer connect, or even find any bluetooth software.

  I looked for a download that is appropriate, but the only one I could find, would run/don't start not due to incompatibility?

  I really need to be able to connect my phone to my computer, as we video we want to convey to the police on the disk.

  Any help or advice would be greatly appreciated.

  Hello

  First of all, it would be really interesting to know if BT is enabled on this laptop.
  You see a little BT icon in the taskbar?

  What happens if you want to use the FN + F8 key combination?
  This key combination toggles between WiFi and BT and activates / deactivates the connectivity.

  In case you can not activate the BT or the icon does not appear in the taskbar, visit this portal Toshiba BT https://aps2.toshiba-tro.de/bluetooth/ and download and install the last battery Toshiba BT for Win 7

• Satellite L855-14R: games running very slow after installing Win 7

  Hi guys,.

  I have the L855-14R satellite, which came with windows pre-installed 8.

  I used win 8 during a time and games have been works ok.
  So I decided to install a copy of windows 7 ultimate 64-bit.

  I downloaded all the drivers from toshiba support and it seems to work fine until I started the same game I played before.

  He was running very very slow even on low graphics settings.

  No idea of what went wrong after the win 7 installation?

  Have Hmm you installed the driver of ATI graphics card?
  Maybe the game uses the Intel HD internal graphic that is part of the Intel Core i7-3630QM processor?

• Satellite L450D - 11G - no internet connection after reinstalling Win 7

  I just installed win 7 pro 64-bit so I can increase the RAM up.
  Initially I had win 7 Home premium SP1.

  I have a Toshiba satellite L450D - 11G PSLY5E.
  I downloaded all the drivers from Toshiba on a memory stick from a source different and then installed on the Toshiba.

  Then, I opened all the drivers one by one and ran each driver individually.
  In Device manager there is a yellow exclamation next to the network controller.

  I have a home network setup that I can connect to the net using phones, tablets and other portable computers.
  The icon on the laptop says NO CONNECTION, NOT of CONNECTIONS AVAILABLE.

  Y at - it a special order to install the drivers. I have install in the order in which they were downloaded.

  Any ideas anyone. TA

  In Device manager there is a yellow exclamation next to the network controller.

  Probably the essential WLan/LAN drivers are not installed properly.
  Do you have problems with the internet connection using WLAN and LAN?

  I recommend you to check if the correct drivers have been installed.

  The wireless network card should be Realtek RTL8191SE 802.11bgn

  Built in LAN module is published also by Realtek...

  so in both cases you need a Realtek drivers