L855-135 satellite display brightness does not work using the new ATI driver

Similar Questions

• Satellite L655 - sound does not work on the new install of Windows 7 Pro x 64

  Howdy all,

  I bought a Newegg L655-S5111, which was on sale, put an SSD, and then installed a legitimate copy of Windows 7 Professional 64 - bit, I got from my current employer (I'm a computer scientist). I've updated to the latest revision of the BIOS (1.70), and I have all the updates installed Windows, all drivers installed, including the correct drivers Conexant HD Audio and ATI HDMI Audio. Unfortunately, the sound does not work. Sound works briefly during my first install of Windows 7, then I cut it up until I could get it set up with a helmet. When I disabled it, she had stopped working.

  This laptop is less than 3 weeks at this point, old and I get no audio on headphones or speakers, even if Windows displays clearly no problems with the drivers, they have the latest version on a new installation, and I can see the audio mixer game. The laptop built-in microphone captures sound as well. I think that's probably not a matter of the physical interconnection, but more likely a software problem, I just have trouble identifying where it is.

  I have also no related error message than any where in the case of newspapers.

  Post edited by: ADMIN

  Can you please do a test and install original recovery image Toshiba, that you got with your laptop on this new SSD, just to see if it will work with the original image.

  Recovery image contains all the necessary drivers and OS is perfectly configured so each piece of hardware in your laptop should work correctly.

• Satellite 1800-712 does not start with the new HARD drive

  Hello world.

  I am currently trying to install a new HARD drive in my notebook of 1800-712.
  I'm having a few trubbles as my Satellite won't start with my new HARD drive.

  I upgraded my BIOS to the latest version.
  The new HARD drive is a 40 GB Samsung.

  Any suggestions on what I need to do to make it all works?

  THX, Philippe

  Hello

  This device was shipped with 20 GB HARD drive.
  You again is 40 GB.
  I guess that the BIOS does not recognize the HARD drive because of the size.

• Select CTRL or copy, does not work - using the new Windows 7-

  Using the new Windows 7, it still does not work:

  > To select the non-consecutive files or folders, press in and hold the Ctrl key and then click each item you want to select.

  There is also the same problem when you use the Ctrl key to 'Copy', rather than 'move '.

  Sometimes a reboot will fix it, but other times not. Is it an appropriate solution for the Ctrl key work properly?

  Hello

  It is difficult to imagine a particular key for only certain combinations of keys does not?

  Here are a few troubleshooting steps that you can try to isolate if all goes well the problem.

  1. start the computer Safe Mode and try to reproduce the problem. Start your computer in Safe Mode

  2. perform a clean boot, and then follow the instructions in the following article to help identify the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  3. create a new user account, log in to the new account and test the issue. Create a user account

  If this step resolves the issue, is that your user account may be damaged. Replace

  your original user account.  How to fix a corrupted user profile.

  Let us know the results.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Satellite P205: Touchpad does not work when the new adapter is connected

  I got a replacement charger for my Satellite P205 but put it has A 4.19 instead of 3. 95 has, they said that it didn't matter, but since I use the charger, I have the following problems:

  -Does not load properly and turns off after an hour.
  -The touchpad has a mind of its own when the charger is connected (windows opens if hovering over button, through the screan jumps when I try to move it, freezes and disappears)
  -Charger Word to say the laptop plugged in but not charging

  What can I do to remedy these problems, the laptop works perfectly when the charger is not plugged in?

  See you soon!

  Hello

  I guess that the touchpad worked correctly in the past with the former sector adapter.
  Is this good?

  Well, it seems that these questions are related to the new power adapter and I would recommend using a 100% compatible adapter.

  Check the AC adapter s old part number and if the issues could be resolved using this adapter.

• Satellite L655-149: recovery does not work with the new HARD drive

  Satellite L655-149

  PSK1JE

  Windows 7 Home Premium 64-bit (factory installed)

  Recovery of HARD drive on drive D (factory installed)

  My old toshiba (MK5065GSX) 500 GB hard drive became too noisy and slow so I plan to replace it with the new drive hard toshiba (MK5059GSXP) 500 GB.

  I created USB Flash HARD drive recovery.
  When the installation is complete and Setup installs devices an error "Windows Setup couldn't configure windows to run on a hardware on this computer.

  I've updated the bios
  I loaded by default in the bios
  I changed the SATA AHCI mode to compatibility IDLE

  assistance in this regard will be highly appreciated

  Set the BIOS to the default settings and try again.

  With the installation of recovery, there is a problem: either it works or not. If this isn't the case, bad luck and the only solution for you is to order original Toshiba recovery DVD on https://backupmedia.toshiba.eu/landing.aspx

  By the way: do you use that stick of recovery for the first time?

• Satellite L30: CD player does not work with the new HARD drive

  Hello

  Just bought a new drive to HARD drive of 250 GB to transform my L30-115 has a home server.

  My problem is when both the new HARD disk drive DVD/CD-RW drive of origin are inserted into L30, the computer crashes and I can not even get into the BIOS (I have the latest edition).

  However, when I disconnect the CD player, system boots fine in a system of operating "plain" (command-line only) - BIOS recognizes very well and everything is fine. Idem: as I disconnect the HARD drive and connect the CD player, I am able to work (for example with a live linux system).

  The question is: * how to install a Windows operating system to a new HARD disk drive *? There is no option to boot from USB. What else can we do? I'm not going to invest more money into this old machine. I would like to install the Windows Home Server in there. There is no need to use the CD player later (all other operations will be performed by the network).

  Person not answering, so I'll do it.

  I was able to boot from USB external floppy drive, so the solution is to boot from external CD drive and install the system.

  It is not an exact solution, because the internal optical drive must be removed, so I'm looking forward to see updates to the BIOS level or other solutions for Toshiba.

• Satellite P100-257 does not work with the new drive HARD WD SATA II 320 GB

  Please could someone knows how to solve my problem.
  I bought new HARD drive to upgrade my Toshiba Satellite P100-257:
  Western Digital SATA II WD3200AAKS 320 16 MB
  (Originally was installed Toshiba MK6034GSX 60 GB HARD drive)
  When installing Windows XP (from Toshiba disk recovery or all other disks), when the Installer starts copying the files to the temporary directory HDD (after HDD format) encounter a problem like "cannot write files to the HARD drive.
  I tried to format the drive before installation (even to split to 2 smaller logical drives).
  Also I have updated the BIOS at 2009-03-04.
  But nothing changes.
  What is the problem?

  Hello

  It seems that the HARD drive has been recognized because you can receive the error message about the Master Boot Record.

  I think that there is something wrong with the partitions on the HARD disk.
  I put t know how you formatted the HARD drive, but I think that you must first reinstall the operating system on a partition in order to check the functionality of the HARD drive.

  Once you have started using the Windows XP disk, try to create more than one partition and this format to NTFS. Then follow the installation of the OS!

• Acorn TV does not work on the new Apple TV

  So disappointed that the Acorn TV app does not work with the new Apple TV we just bought. We have subscribed on iTunes and nothing happens when you try to activate the software. We can look good on the MacBook, iPad and iPhone. Verified the purchase on iTunes account and that's fine. Contact Acorn and say it is a matter of Apple.

  Strange that I have to use Chrome to even write this question. Safari and hers do not work with the Support pages. I'll send in the comments.

  I'm resetting Apple TV now. We have been with the Apple TV since version 1. I hope that we can make this work!

  How would work appletv mount 1 app on the job?

  each app to live their own lives the appletv core do not even know what applications do they just

  Use the ios network to get their content

• My Lenovo ThinkPad(red scroll) scroll function does not work in the new Firefox 4. It worked very well at point 3.6. Can you please fix this because it is a very important feature.

  (Middle button) scroll feature does not work on the new firefox 4. For this reason, so I need to move the scroll bar to move the page. It's very irritating problem, if you are a guy who uses the middle button to scroll. Can you if you please fix this...

  Thank you!!!

  I've updated to Firefox 4.01 today and the Center knob on my Lenovo T400 does more. I downloaded the updated Ultranav utility and the Ultranav driver for my T400 by http://www-307.ibm.com/pc/support/site.wss/MIGR-72858.html , then uninstalled the 'Thinkpad Ultranav Driver' to add/remove programs, rebooted and then installed the update utility and driver (another reboot) and now it works perfectly.

  So happy to get it working again.

• HP laserjet p1102w: wireless printer does not work with the new wireless network

  My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you

  Hi Shlomi,
  Thanks a lot for the info. I'll give it a try today...

• IR remote control does not work with the new imac

  IR remote control does not work with the new iMac. From 24 "2007 machine to last 27"

  Correct, because Apple no longer includes the IR sensor in newer models

• Search does not work on the mapped network drive

  Separated from this thread.

  Same problem: search does not work on the mapped network drive, but works if the shared folder is accessible via the network as a UNC path:
  Mapping as UNC path after a server reported results navigation:

  

  The impression that it is something in the drive mapping in Win 8 (running 8.1). Problem does not appear in Win 7

  Hi Simon,.

  Please contact Microsoft Community. I understand that you have a problem with research on mapped network drives.

  Advanced networking issues are supported in the TechNet Forums. I suggest you send the request in TechNet Forums to get help.
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w8itpronetworking

  Hope this information helps.

• The license we use for an old PC no longer valid for the new PC - uninstall of the old PC and still does not work on the new PC

  Hello

  The license we use for an old PC no longer valid for the new PC - uninstall of the old PC and still does not work on the new PC

  A disable the old installation before you uninstalled?  If this isn't the case, then it is always considered as enabled, which could mean that you have all your activations in use.  You can contact the Adobe Support via chat and ask them to reset your activations.

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

  If none of this helps can you identify which software it comes and what error messages you get when you try to run on the new machine?

• Satellite A110 - switch WiFi does not work with the new WiFi card

  Hello everyone

  I have a problem with my laptop Toshiba Satellite A110 - 178 (PSAB0E). I replaced the original Intel 3945abg with Intel Link 5100 WIFI card and on the new wifi hardware wifi card switch does not work.

  New wifi card is discovered and drivers to the correct job but when I try to search with the Intel Pro/Wireless software wifi networks I message to turn on hardware switch, but there light and not work. The old wifi card swich works OK - orange light is on. On the new map light is off and swich does not work.

  Help, please

  Hello

  Do you have also enabled the WLAN functionality by pressing FN + F8?
  Check it!

  In addition, I think the case is clear: the new wireless LAN card isn't compatible with Satellite A110.
  So in my opinion, you must use remove the new card Intel and install the old card that works fine in your laptop.