Lab Setup - it will blow my supply?

I'll put up Lab at home, I can prepare VCP certification. I live in a 800sft APPT. That's what I think of having in my home lab setup. Please suggest if it will be good and my main concern is can I have a lot of these systems to my appt and hope he doesnot BLOW AWAY my electrical system in my apartment, someone at - it had a similar installation in an appt.

1.ESX1

Dell Poweredge T110

250 GB HARD drive

4 GB of Ram

2.ESX2

Dell Poweredge T110

250 GB HARD drive

4 GB of Ram

2 VC

HP Desktop dual-core

4 GB of ram

200 GB HARD drive

Couple of monitors also.

Please suggest, thanks in advance.

Server Dell PowerEdge G11 are fine (but to be honest, all sellers are good).

Intel or AMD could be the same... so check what could be better (but I suggest taking at least a 6 core CPU and at least 12 GB of RAM).

With 4 drives SATA a a RAID at least 128 MB card cache, you can run good VMs 6-8

André

Tags: VMware

Similar Questions

  • I have instaled my creative suite the other day because I had to reinstall windows 7, I had problems while I had to do a system retore that wiped out the installation. I try to reinstall it and that is to say that the Setup program will not initialize, it

    I installed my creative suite the other day because I had to reinstall windows 7, I had problems while I had to do a system retore that wiped out the installation. I try to reinstall it and that is to say that the Setup program will not initialize, it's because I'm trying to reinstall it in a short period of time

    See link below and check:

    https://forums.Adobe.com/thread/1848277

  • VB6 sp6 package setup.exe will not register files/deivers

    Hello
    I wrote several applications in VB6.  Send us these requests to clients for my product configuration in the field.
    I use the package Wizard and deployment of VB6 SP6
    When the visitors in the field run the setup.exe, they get the error-
    An error occurred when registering the file 'C:\Windows\System32\hid.dll '.
    This happens to a lot of files - such as Ws32_32.dll, setupapi.dll, mswinsck.ocx...
    I read that it has to do with SysWOW64 seen pre-compiled drivers inside who are older than VB6 has access revision to, and that the vb6 setup.exe which is part of the package cannot update drivers SysWOW64.

    Is there a way to make a vb6 package that installs on Windows 7?  If not is there at least a way to remove the errors, so that customers are not, the application is running.

    Thank you
    Martin

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

    If you give us a link to the new thread we can point to some resources it
  • 2013 Exchange setup/PS will fail because Exchange 2010 SP3 missing on the edge transport server... but SP3 is installed!

    I downloaded the new installer Exchage 2013 CU1 which should allow Installation of 2013 Exchange in an existing Exchange 2010 organization. But already Setup/PS the prerequisite check fails. He know that both my havn't 2010 SP3 Exchange Edge Transport server installed. But that's not true: SP3 is installed on both servers. How to Setup research version and why it might find old entries? And more importantly: How can I make sure that the Organization's Information contains the build good level of Edge Transport servers? I hope that exchanging 2013 in the end is not as Buggy and frustrating as this never ending "can not install because ' Business.

    Hi Golfinho,

    Thanks for the post.

    I would like the season you post your question on the TechNet Forums.

    http://social.technet.Microsoft.com/forums/en-us/exchangesvrdeploy/threads

    I hope this helps.

  • Lab Manager 4 will not release the license after the removal of host.

    Hey there,

    I am running Lab Manager 4 in my infrastructure.  I recently added a lot of CPU 2 and licensed.  Shortly after, I removed the host of Lab Manager, but he has not published the 2CPUs of licensing - which means that I am able to use my license 2CPU part to add new hosts.

    No idea how I can get the license for free?

    Thank you!

    You must "unprepare" this ESX host in the laboratory Manager.

    The 'prepare' function consumes your license, and similarly "unprepare" frees.

    This ESX host appears in the overall organization > resources > Hosts?

    Best regards

    Jon Hemming

  • A power of 1000w Dell Precision 690 United States will work in the British system

    I want to order a replacement power and found a Dell Precision 690 1000W ND285 power in the United States, I know that this system works this power but wanted to know if I ordered it from the United States to be shipped to the United Kingdom (England) it will work here or is there a voltage difference that will blow/effect it?

    The reason why I ask this is that I repair my friends Precision 690 power because it starts not as it should be because it has the dreaded 1-3 and power button flashing continuously orange. I usually get it going again for him leaving on the supply cable of the day after / for a few hours, but the problem comes back finally after some closures, so not a solution.

    His system has 32 GB of RAM, a processor my171 mother board 2 Xeon QuadCore 5355, a Nvidia Quadro 4800 graphics card and 4 SATA drives and 2 DVD r/w drives all sitting in the appropriate ports.  I tested it on and all the way to no disk no ram, but even in this case the problem may occur intermittently.  I don't know that his power relatively maybe even a little somewhere? but I've looked and looked and left with the feeling that his power.

    but the only one I can find that is affordable is to the United States, the price they want to pay in Germany, I could buy a car for.

    American food will work in my UK machine?

    Thank you.

    Hugh

    (Just note that happened in (general Hardware, Audio, video) I hope this is the right category, if not my apologies.)

    hughhill

    Yes, it should

    Input 100-120 v or 200-240 v, output: 1000w Max, reference number: ND285

    Model number: N1000P-00, Ref number: NPS-1000AB a Rev: 06

    For Precision 690 microtower systems

    Connectors:

    1 x 24 - Pin ATX power connector Standard ATX Standard 1 x 20-pin power connector, power supply ATX Standard 1 x 12 pin connector, ATX Standard 1 x 8-pin power connector, 2 x PCI-Express, 4 x Mini 2 power connectors pin power connectors, adapter 1 x 6 - Pin power connector.

    Before using the power supply, check that the voltage is set at 240v. There should be a red toggle on the power switch, to set the voltage, if there is no switch, then the power supply is auto switching.

  • Internal HD will not rise in Recovery Mode

    I have an MBA who said that I had to repair the disk 11'.  Easy fix right?  So I restarted the computer and enter in Recovery Mode, to make a repair in disk utility and the HD is grayed out.  I can't select it, nothing.  I ended up installing El Capitan and during the installation he completed repairs, but I still can't get to HD in repair mode.  The computer starts and works fine otherwise.  I must stress that the HD is a secondary market Transcend that we replaced a year ago.  Now my client wants to wipe the computer and give it to a family member, but like I already said I can't make a clean wipe and install via the recovery mode.  Any ideas?

    Thanks in advance!

    Rob

    What version of Mac OS X has been pre-installed, when it was new? If you plan give away, and then you must clear the disc and install the version that CSME with the computer. If it's on DVD, you need the installation discs.

    Before you sell or give your Mac before Lion

    Follow the instructions until you get to step 5:

    What to do before you sell or give away your Mac - Apple Support

    When you get to step 5, you will need your Snow Leopard or earlier installation disc that came with the computer when it was new.

    1. Follow these steps to install the original version of the operating system that came with the computer.

    1. start the computer using the Snow Leopard installation disc or disc 1 that came

    with your computer.  Insert the disc into the optical drive and restart the computer.

    After the ring, press and hold the C"" key.  Release the button when you see

    a small gear appear under the dark gray Apple logo.

    2. once the load setup program select your language and click continue

    button. When the menu bar appears select utility drive in the Utilities menu.

    After disk utility charges select the hard disk entry in the list on the left (mfgr. ID and)

    size of the disk.)  Click the Partition tab in the main window of THE.  Set the number of

    partitions to one (1) from the Partitions of the dropdown menu, click on the Options button

    GUID, click OK, and then select define the Mac OS Extended format type

    (Journaled), then click on the apply button.

    3. when formatting is complete FROM and return to the installer.  Move forward

    with the installation of OS X and follow the instructions included with the installer.

    4. If you plan to sell or to give to your remote computer, then proceed as follows:

    Once you reformat your hard disk and reinstall OS X, the computer restarts with a

    Screen of welcome and you prompt to choose a country or region. If you want to leave

    the Mac in an out-of-box state, do not continue with the configuration of your system. Instead,.

    Press command-Q to stop the Mac. When the new owner turns on the Mac,

    the Setup Wizard will guide them through the configuration process.

    Otherwise, if it came with Lion or later:

    What to do before you sell or give away your Mac - Apple Support

  • MacBook Pro Panic error - will not start

    I'm getting the following at the start. Have no idea what it is or what to do. Appreciate any advice.  Backup the latest TM is dec 10. But can't even get the stages of recovery to work.  Tests of material D on OK.

    If you're in Snow Leopard as your profile is displayed, follow these steps:

    Reinstall OS X without erasing the drive

    1 fix the hard disk and permissions

    Boot from your Snow Leopard installation disc. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions . Wait until the operation is complete, then exit FROM and return to the installer.

    If THE reports errors, it cannot be resolved, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

    2 reinstall Snow Leopard

    If the disc is OK then leave FROM and return to the installer.  Proceed to reinstall OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a new copy of Mac OS X, the installer will move your Home folder, third-party applications, elements of support and network preferences in the newly installed system.

    Download and install Mac OS X 10.6.8 v1.1 updated Combo.

    If the above does not work, then follow these steps:

    Clean Install of Snow Leopard

    Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

    1. start the computer using the Snow Leopard installation disc or disc 1 that came

    with your computer.  Insert the disc into the optical drive and restart the computer.

    After the ring, press and hold the C"" key.  Release the button when you see

    a small gear appear under the dark gray Apple logo.

    2. once the load setup program select your language and click continue

    button. When the menu bar appears select utility drive in the Utilities menu.

    After charge OF select hard drive entry in the list on the left (mfgr. ID and drive

    size.)  Click the Partition tab in the main window of THE.  Set the number of

    partitions to one (1) from the Partitions of the dropdown menu, click on the Options button

    GUID, click OK, and then select define the Mac OS Extended format type

    (Logged, if supported), and then click the apply button.

    3. when formatting is complete FROM and return to the installer.  Move forward

    with the installation of OS X and follow the instructions included with the installer.

    4. Once installation is complete your computer will restart in the Setup

    Assistant. After finishing Setup Wizard will complete the installation, after which

    you will use a new installation of Mac OS X.  You can now begin the process of updating

    at the opening of updated software and installing all recommend updates to bring your

    current installation.

    5. If you plan to sell or to give to your remote computer, then proceed as follows:

    Once you reformat your hard disk and reinstall OS X, the computer restarts with a

    Screen of welcome and you prompt to choose a country or region. If you want to leave

    the Mac in an out-of-box state, do not continue with the configuration of your system. Instead,.

    Press command-Q to stop the Mac. When the new owner turns on the Mac,

    the Setup Wizard will guide them through the configuration process.

    Download and install Mac OS X 10.6.8 v1.1 updated Combo.

  • Why my macbook is blowing air?

    Sometimes my macbook will blow air hard and more heat when its plugged in. whatever that means and how do I do? Ive had only my laptop for less then a year and I don't use it that often because there the way it is. Can someone help me diagnose this problem?

    Your Mac uses measured temperatures of multiple sensors to control the speed of the fan inside. If sensors indicate high temperatures, fans will speed up to try to cool down your Mac and avoid overheating.

    Occasionally, a failed sensor reported high temperatures in the error, and if you think that this hardware failure it should be considered in immediately.

  • Windows blows, I'm a MAC

    Why not windows?

    CF. http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/452fce18-89b7-4a46-96e2-b7f99dae1656

    Help: I got hacked. Now what should I do?
         http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

    PS: If you don't update your Mac either, it will 'blow,' too!

  • I need help finding a power supply

    I need to find a power supply that is compatible with my Compaq Presario SR5816F

    It must have a minimum flow of 12v @ 18 amps and measured 350 wattts...

    Thank you.

    See my response to your thread later:

    http://h30434.www3.HP.com/T5/desktop-hardware/will-this-power-supply-work-with-my-PC/m-p/4292292#M85120

  • Windows XP will not share!

    My Vista laptop, I can not connect to or ping my XP desktop or computer laptop XP to my wife; In addition, I can not connect the XP machines to each other.  I have CAN connect to my laptop Vista to the BEST of my XP desktop or portable.  I use a router and a Linksys WRT54G wireless access point.  I use the Working Group and everything is shared and configuration to operate together.  Help, please.

    I see all THE computers when I "View Workgroup Computers" (XP) and open the 'network' 'Vista', I see all of the computers.  I'm using DHCP on the router, but cannot ping computers.  I activated all the files and printers shared, and examined the network documentation and links.  I'm sure I'm missing something very simple, but I'm just not see it.

    Thank you in advance!

    Probably a firewall misconfigured on the XP machines (or several firewalls running inadvertently) because when sharing files/printer is properly set up there is no trouble sharing between XP and Vista. Here is some information on the general network troubleshooting. I know that you already have a large part of the work, but maybe something here will help.

    Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

    http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

    For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

    Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

    A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the Windows Firewall. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

    (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

    (C) in Vista, turn on password protected sharing. Create accounts of users and corresponding passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

    XP - set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

    Vista - Start ORB > Search > type: netplwiz [Enter]
    Click continue (or provide an administrator password) when you are prompted by UAC

    Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

    D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

    E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

    MS - MVP - Elephant Boy computers - don't panic!

  • Why the installer will remove old CC apps?

    I have older CC apps for open (even some old pagemaker files) very old files and some files that are open not correctly in the current version. Why the app Setup 2015 will remove legacy applications? Is there a work around? I have to cancel my membership and return to individual applications or installation which will remove also old apps?

    I found an answer here: Creative Cloud offering more choice for Installations. Adobe Customer Care Team

  • VMWare Workstation Lab for VCP, online options

    Hello

    Someone at - it a laboratory ESX or ESXi secure Channel in VMWare Workstation installation? I want to install a couple of ESX? ESXi hosts to perform vmotion, DRS, etc but I got contradictory about whether VMware information if possible. I do not expect to be supported.

    I would be grateful anyway - of. If this is not possible, I would that all recommendations for affordable online labs.

    Thank you

    Robert

    Hello...

    I followed what Sean Duffy suggested here:

    http://www.simple-talk.com/sysadmin/virtualization/VMware-Lab-Setup---a-virtualized-lab-for-testing-HA-and-DRS/

    Worked a treat.

    I am currently running under workstation 8.

    • 2 * servers Windows 2008 (Server AD & VC)
    • A NAS
    • 2 * ESXi hosts

    I then nest my virtual machines under ESXi hosts and can test all the features I need.

    My PC spec is:

    CPU - I7 2600 K

    RAM - 16 GB

    Storage - 120 GB SSD for the VMDK. I was running on my NetGear readyNAS, but found the performance was a little painful, especially when turning on/off or suspend the VMs (UN).

    My only complaint is that my VMWare Workstation expired evaluation license and currently waiting for my license after having passed my VCP. (even if it's another story/thread)

    For my Windows servers, I have a technet subscription.

    For ESXi, I'll have to re - install, but it's no biggie.

    I would like to see VMTN subscriptions available, but again, this is another thread.

  • Mediante Creazione VDI VMware View in a virtual LAB.

    Salve a tutti.

    Sto doing una tesi sulle tecniche di accesso al remote office, e dopo aver implementato UN infrastruttura virtuale con prodotti VMware in questo modo http://www.simple-talk.com/sysadmin/virtualization/VMware-Lab-Setup---a-virtualized-lab-for-testing-HA-and-DRS/

    I wanted to view Vm ware, per poter fare delle sizes poi su installarci delle prestazioni del Greece PCoIP, ham mediante accesso al Office remote, di servizi come video, windows ecc ecc applications.

    ECCO anchor prima di cominciare he mio problema e:

    (1) Visto che ho software of it tramite creato UN datastore thanks (virtuale) FREENAS, e poi Ho thanks tra i miei had to accommodate ESXi 5, sara questo Hard disk da cui he composer immagini del OS prendera e delle applications da mettere a disposizione degli users?

    O this sara need di metterci a HDD fisico con una sua propria formattazione? Tipo NTFS FAT 32?

    SE ho sbagliato qualcosa o posso correggere he sistema pure consigliatemi.

    Grazie in pre-empted a quanti mi risponderanno.

    Knew a host solo fisico, vMotion e altri servizi non can bring some miglioramento... solo anzi above in più.

    SE poi li devi testare/implementare comunque per scopi allora e altri a discorso altro.

    IO ti avevo solo suggerito configurazione by rates the cose andare alla meno worst... Già UN solo host fisico Può essere poco by VDI, aggiungono appliance is poi TR by storage, host virtuali altro rischi e solo di avere a lento ambiente e potenzialmente inusabile.

Maybe you are looking for