LabSQL to MySQL connection string syntax

Similar Questions

• Problem with Web Builder and MySQL connection

  Hello

  I created a web service VI (see picture attached) to connect my Web Builder application with a MySQL database. The problem is that I get nothing on my exit signs during the call to the web service VI.

  Some tests I've done:

  (1) this web service VI works perfectly (I mean indicators 'value', 'status' and 'data_hora' give the desired result) when the VI run directly through LabVIEW. MySQL connection and my VI are OK...

  (2) I know my web service VI was successfully built and deployed because the indicators give me some value if I sign something for them other than my SQL output

  (for example: if I put a string constant "Hello" on indicator "valor" I get "Hello" when calling the web service VI)

  I suppose that the database connectivity kit is not supported when a VI is integrated with a web service VI. In my case, kit screws are inside the subVIs 'start', 'exec 2d' and 'stop' showed in the picture as an attachment.

  Any idea?

  Thank you

  Marcelo

  

  I'm using LabVIEW 2001 Wesley, but I solved my problem.

  It was just a MySQL data source problem: I just had to add my info DB through C:\Windows\SysWOW64\odbcad32.exe.

  Thank you

  Marcelo

• What is the url connection string hive in BDD 1.1?

  In my project, I need get data from the server to the hive. Test the jdbc connection to the hive by using the hive good username and password, but it fails and shows "cannot establish a connection."

  my connection url string is as jdbc:hive: / /myservername: 10000 / default

  I also test the other string of cloudera pilot of hive (jdbc:hive2: / / host : port / db_name ) and change the connection to jdbc:hive2: / /myservername: 10000 / default

  There too.

  Before establish us a connection, it must provide a dirver as name

  driverName = "org.apache.hadoop.hive.jdbc.HiveDriver"

  What is the url connection string hive in BDD 1.1? and which driver hive should be used?

  In the BDD 1.1, data in a table of hive are usually indexed and analysed when triggered via BDD provided - data processing interfaces the CLI data processing is run manually, or that is triggered by a cron job.  In this case, it is unnecessary to set up a specific JDBC connection to the table of the hive - BDD can index directly.

  The details above, I think you are saying that the table of the hive is in a different instance of the hive, in a cluster of Hadoop BDD is not installed, so the BDD data processing cannot run in the ordinary way, you want to read JDBC.  Is this correct?

  I think that BDD is struggling to load the hive JDBC driver - BDD 1.1 only DB Oracle and MySQL are supported for JDBC support.

  Is there something stopping you to reproduce the table of the hive in the environment where you have installed the BDD?  BDD can then process the table normally.

• How to recover the sqlplus connection string?

  I would get connection string of the sql syntax, but cannot find how.
  
  Thank you for helping me!
  m.

  How to recover the sqlplus connection string?

  In sql * more type

  DEFINE _CONNECT_IDENTIFIER
  

• SQLite3 connection string?

  Hello

  I have a SQLite3 database file. I read with labivew. I installed the ODBC driver since http://www.ch-werner.de/sqliteodbc/.

  I created the DSN. I would like to read different with their paths .db files.

  If I use directly the DSN 'temperatura' is works very well, but he always read from the path that I put in the configuration of the DSN - name of the database. Check the attached file.

  I would like to have a DC path to read any file, but the connection always read from the same file string. Show it in http://www.connectionstrings.com/sqlite3-odbc-driver/ :

  DRIVER = SQLite3 ODBC Driver; Database = c:\mydb.db; LongNames = 0; Timeout = 1000; NoTXN = 0;
  SyncPragma = NORMAL; StepAPI = 0;

  But it does not work. He has not found the provider.

  On the internet, I found this:

  Provider = MSDASQL.1; initial Catalog = C:\test.db; Persist Security Info = False; DSN = temperatura

  IT works but always read the file corrected in DSN temperatura configured in the ODBC administration

  In the initial catalog, I put another file and read the same thing that sits on the DSN temperatura.

  Somehow I can use good connection to play diferent?

  Concerning

  The SQLite library documentation seems to suggest that simply use it as your connection string:

  Driver = driver ODBC of SQLite3; Database = full-path-to-db;

  What version of LabVIEW are automatically using and that the number of bits (32/64)? There are two versions of the ODBC - one for the 64-bit ODBC drivers connection manager and one for 32-bit ODBC - drivers they are treated separately by the operating system.

  I've never used this library - but there is an alternative that I used and it works fine: http://sine.ni.com/nips/cds/view/p/lang/en/nid/212894

• Support of connection string. Works fine in VS, not SQL.

  Attempt to create server SQL 2008 r2 link our AS400. I have a connection string that has been tested in Visual Studio that works:

  Driver = {Client Access ODBC (32-bit) driver}; XUID = xupd44xxx; System = QSERVER; DBQ = QGPL; dftpkglib = QGPL; LanguageID = ENU; pkg = QGPL/DEFAULT (IBM), 2,0,1,0, 512; qrystglmt =-1;

  In SQL 2008 r2 there is no Client Access ODBC Driver listed under suppliers. I chose IBM DB2 for I IBMDA400 OLE DB provider with the same provider string.

  The linked server has been created, but failed a connection test.

  An exception occurred during the execution of a Transact-SQL statement or batch.

  Failed to initialize the source object of the provider data OLE DB 'IBMDA400' of the 'name' linked server (Microsoft SQL Server, error: 7303)

  Searched error and appears as invalid server name. Name of the server (QSERVER) replaced by the IP address.  Still no luck.  Now, my forehead is flat of this bump on my desk.

  Any help would be greatly appreciated.

  Hi CorrieSigler,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. Please post your question in the MSDN forum. You can check the link for your question:

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer/

  Hope the helps of information.

• Edge connection string error

  Hello

  I develop application with blackberry-ksoap. I have 8520.
  My application works with wifi, but is not compatible with the edge connection.
  I tried under connection strings. But does not work.
  Can you help me?

  (Note: this problem, I wrote another forum, someone could not answer.)

   public String getHTTPAdd() {        String serviceUrl = "";        if (radio.isSelected() == true){            setIsConStr(";interface=wifi");             serviceUrl = "http://localhost/test/test.asmx";        }        else if (radio2.isSelected() == true){            setIsConStr(";interface=wifi;deviceside=true");            serviceUrl = "http://myhost:3000/test/test.asmx";        }else if (radio3.isSelected() == true){            setIsConStr(";19780/rim.net.gprs");            serviceUrl = "http://myhost:3000/test/test.asmx";        }        else if (radio4.isSelected() == true){            setIsConStr(";XXXXXXXXXXXXXXXX");            serviceUrl = "http://myhost:3000/test/test.asmx";        }        else if (radio5.isSelected() == true){            setIsConStr(";deviceside=true");            serviceUrl = "http://myhost:3000/test/test.asmx";        }        else if (radio6.isSelected() == true){            setIsConStr(";deviceside=false");            serviceUrl = "http://myhost:3000/test/test.asmx";        }        else if (radio7.isSelected() == true){            setIsConStr(";deviceside=false;ConnectionType=m ds-public");            serviceUrl = "http://myhost:3000/test/test.asmx";        }        else{            setIsConStr(";rim.net.gprs");            serviceUrl = "http://myhost:3000/test/test.asmx";        }        return serviceUrl;    }
  

  Also, I tried this example,

  setIsConStr(";deviceside=true;ConnectionUID=" +uid+";ConnectionType=m ds-public");
  

  setIsConStr(";deviceside=false;ConnectionUID=" +uid+";ConnectionType=m ds-public");
  

  setIsConStr(";deviceside=true;ConnectionUID=" +uid+"");
  

  setIsConStr(";deviceside=false;ConnectionUID=" +uid+"");
  

  And againly does not work.
  (as an additional info, I use KSOAP Api to call Webservice)

  I solved it. Because of the api Ksoap, do not access edge. Instead, I use the HttpConnection class.

• Using the BIS network but with guidance TCP connection string

  I just want to clarify if this is really possible.

  Being a small/medium business, that we can afford to be a partner just blackberry alliance partner to win have BIS-B connection size.

  In any case, I just want to clarify that if a device is registered with BIS, is it still possible for my application to use the direct TCP connection string (with AFN etc) to extract information via web services and socket connections?

  I read this, I just want to be sure before making further development to 100%

  http://supportforums.BlackBerry.com/T5/Java-development/connecting-your-BlackBerry-http-and-socket-...

  most of the time: Yes. It is dependent on the vendor however, some may charge extra, for example.

• could not find a server reports and analysis hyperion running on localhost port 6800. Please check your connection string server and verify that the server is

  Hi all

  We have properly installed and configured Hyperion Reporting and analysis 11.1.2.4 in windows 2012 server however when I try to logint to the workspace, I get an error like "start-up of the specified document does not exist in the repository." "Select a new start under the General Preferences tab document" monitoring of "could not find a server reports and analysis hyperion running on localhost at port 6800. Please check your connection string server and verify that the server is up '.

  
  

  
  

  

  
  

  

  HyS9RaFramework_epmsystem2-syserr:

  GsmNotFound

  com.brio.one.services.globalservicemanager.GSMException: GsmNotFound

  at com.brio.one.services.globalservicemanager.GSMFactory.getGSM (unknown Source)

  to com.brio.one.client.ClientFactory. < init >(Unknown Source)

  to com.brio.one.client.ClientFactory. < init >(Unknown Source)

  to com.brio.one.client.ClientFactory$ ClientFactoryInitializer.connect (unknown Source)

  at com.brio.one.client.ClientFactory.getClientFactoryConnect (unknown Source)

  at com.brio.one.client.ClientFactory.getDefaultGSM (unknown Source)

  at com.brio.one.web.properties.ApplicationProperties.getDefaultGSM (unknown Source)

  at com.brio.one.web.properties.ApplicationProperties.getDefaultGSMContext (unknown Source)

  at com.sqribe.WS.WSBaseServlet.setDefaultGSMContext (unknown Source)

  at com.sqribe.WS.WSBaseServlet.initLogging (unknown Source)

  at com.sqribe.WS.WSBaseServlet.loadConfiguration (unknown Source)

  at com.sqribe.WS.WSBaseServlet.init (unknown Source)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletInitAction.run (StubSecurityHelper.java:283)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)

  at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)

  to weblogic.servlet.internal.StubLifecycleHelper. < init > (StubLifecycleHelper.java:48)

  at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)

  at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981)

  at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955)

  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)

  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)

  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)

  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)

  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:52)

  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:31)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:246)

  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)

  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)

  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)

  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  In the workspace, it shows that the Service is pending.

  

  EMP Diagnostic Report:

  

  Can help kindly out how should I solve this problem.

  I restarted the services and rebooted the Machine but still getting the same error.

  Kind regards

  VJ

  
  

  Hello

  I've reconfigured the Reporting, analysis, and everything by, I chose "Drop table" and the issue was resolved.

  Kind regards

  VJ

• Developer SQL 4.1.1 connect returns "invalid connection string format.

  The "invalid connection string format" error is returned, while trying to connect, you use sql developer 4.1.1.19, using 1.8.0_51 JDK on Win 7 x 64 environment.

  The powers of the exact same connection, on the same OS Win 7 x 64, a product without any errors using sql developer 4.0.2.15, using the JDK 1.7.0_80

  Credentials were basic, by default, the name of the Service (not SID) and no special authentication.

  This problem is replicated when it is installed on a different platform to Win 7.

  Screen attached.

  You say you have no non-alphabetic characters, but see this previous discussion (a hyphen was the problem) and see if any of Jeff's suggestions work for you: connection error after upgrade to 4.1

  I also read another post (non - developer SQL) where a symbol (@) in the password was a problem, but that may not apply to your case.

• open connection string

  Greeting dear community.

  What I have in my tnsnames.ora and verify that everything works via sqlplus

  CDB1 =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 0.0.0.0)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = cdb1)
      )
    )
  
  
  ORCL =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 0.0.0.0)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = orcl)
      )
    )
  YMQCTPRD =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = ymsdbprd-scan)(PORT = 1522))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = YMQCTPRD)
      )
    )
  
  
  
  
  YMQCTSUP =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = ymsdbppr-scan)(PORT = 1522))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = YMQCTSUP_SRV)
      )
  

  I try to get RJDBC to work so I can connect to Oracle of R analysis of data...

  This connection string works for my local db which I have in my virtual box

  con <- dbConnect(drv, "jdbc:oracle:thin:@//localhost:1521/orcl", "demo", "demo")
  

  However, it does not work when I do it to remote db that I really need to pull data from...

  > con <- dbConnect(drv, "jdbc:oracle:thin:@//ymsdbppr-scan:1522/YMQCTPRD", "user_read", "user_read")
  Error in .jcall(drv@jdrv, "Ljava/sql/Connection;", "connect", as.character(url)[1],  : 
    java.sql.SQLException: Listener refused the connection with the following error:
  ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
  

  For this DBMS tnsnames.ora entry "ymsdbprd-scan" but your JDBC URL 'ymsdbppr-scan.

• Can someone give me RAC connection string?

  Hello

  Can I use the db node to connect RAC instances?

  Use the same connection string you use in apps (no JDBC).

• Cman is not like the thin driver Jdbc connection strings, it?

  Hello

  I use Oracle connection Mgr 11.2 to filter my clients access to data bases.

  I configured and allowed a PC to connect to a certain database and when

  using SQL * more or this client Toad, passing through cman, it works fine.

  But now the same guy installed SQL Developer, and it seems * impossible *.

  to make connections through my server cman, they routinely get rejected

  with

  ORA-12529, TNS: connect rejected based on the current filter rules

  If I try to go through the login option of TNS (who works with

  sqlplus...) or through advanced = > and then "JDBC: thin @ < complete block of TNS > '!

  (using "basic" does not seem possible because it only allows to specify the name of the host, port, and SID...)

  Has anyone ever encountered this problem before? How does SQL Developer gets rejected

  even when you use the option of TNS, which also works fine with sqlplus/Toad?

  And is it possible to have a Jdbc thin connection string access via a configuration cman?

  Thank you very much in advance for any advice...

  Kind regards

  SEB

  
  

  Not a familiar topic for me, but I came across a note in the developer's Guide to the JDBC and the reference, Advanced Topics, on the definition of AUTHENTICATION_LEVEL = 0 in the cman_profile of the cman.ora file entry for when JDBC Thin is currently in use.  Don't know if with the help of old 10g doc is valid here, but I guess that he check could not not bad:

  23 advanced subjects

  In turn, since this user has a customer Oracle installed on the PC and use SQL * Plus, you can try the driver JDBC OCI/thickness.  Select thickness OIC via...

  Tools > Preferences > Datatbase > advanced > use OIC/thickness box

  In addition, for SQL Developer 4.0.x includes the Advanced preferences, this to point to a specific Oracle client installation...

  Checkbox use Oracle Client

  Configure...

  Hope this helps,

  Gary

  SQL development team

  Post edited by: Gary Graham

• CARS connect string information

  Hi all

  In RAC environment, I have 3 listeners SCAN:

  Listener = (Description = (ADDRESS_LIST = (Address = (Protocol = IPC) (Key = Listener))) # line added by Agent

  LISTENER_SCAN3 = (Description = (ADDRESS_LIST = (Address = (Protocol = IPC) (Key = LISTENER_SCAN3))) # line added by Agent

  LISTENER_SCAN2 = (Description = (ADDRESS_LIST = (Address = (Protocol = IPC) (Key = LISTENER_SCAN2))) # line added by Agent

  LISTENER_SCAN1 = (Description = (ADDRESS_LIST = (Address = (Protocol = IPC) (Key = LISTENER_SCAN1))) # line added by Agent

  ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1 = ON # line added by Agent

  ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN2 = ON # line added by Agent

  ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN3 = ON # line added by Agent

  ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER = ON # line added by Agent

  Setting up database using dbca, I needed to create a local listener (auditeur1) and set the port 1531.

  End user (AppServer) asks me to send to the connection string, which is a typical of instance information unique database, not CARS.

  Should what information I send to the end-user to allication Server to connect to the node 2 RAC database?

  Thank you

  KZ

  B

  Hi kazyskiyn0w

  Hope below allows

  When you scan of installation on your RAC environment... its cool to connect to the analysis considers less user login or application.

  Note: Be sure to set the environment as needed

  Step 1

  Find the name of the scan using the command

  scan of srvctl config $

  Step 2

  find the port that the scan is listening on using below command

  $ srvctl config scan_listener

  Step 3

  Find the name of the service by

  Connect in one of your RAC nodes and check the tnsnames.ora entry for your

  service as described below. If you have a valid service created it will be

  There is an entry in your file $ORACLE_HOME/network/admin/tnsnames.ora

  Step 4

  Now connect to your RAC database using either method A or B below:

  A.

  EZCONNECT format /@:.

  for example

  Scott / tiger@rac-scan:1521/orcl.oracle.com

  So here your Application will use below to connect

  @:/

  @rac-scan:1521/orcl.oracle.com

  B. Si your application uses jdbc to connect send format their

  JDBC connection format

  JDBC: Gee @: port/service name

  for example

  JDBC:Oracle:thin@RAC-scan:1521 / ORCL. Oracle.com

  Have a nice day

• Is there a way to change the connection string to the database by using the command line on the virtual machine?

  Hi, I use 1.5 space Horizon

  can someone help me by telling me where I can change the connection string for the database on the virtual machine itself.

  I was away, and our stuff has been migrated databases to another server. Now my horizon does not connect because it can not find the database. I can either on the hwconfigurator.xxx.com.

  Thank you

  What do you see when you go to https://hwconfigurator.xxx.com?

  You can try to change this property in /usr/local/horizon/conf/runtime-config.properties on your service - will (s) and the server restart of tc by using the command "/etc/init.d/horizon-frontend restart".

  datastore. JDBC. URL = jdbc:PostgreSQL: / //saas? = stringtype unspecified