LabVIEW 2011 32 bit, fully ER3000, Windows 7 64 bit

I currently have Labview 2011 32 bit installed on a machine running Windows 7 64 bit.  I am trying to run the screw in the attachment below, but I get the error that the function called in the DLL has failed and that FULLY. DLL may be used.  A reflection as to why this is happening?  I already checked to ensure that the referenced path in function call of the nodes of the screw is correct... any help is appreciated!

~ Avi


Tags: NI Software

Similar Questions

  • Problem with the configuration to use Silver Style with labview 2011 (32-bit)

    Hi my friends.

    I installed labview 2011 32 bits. I select money style my default control style. but when I create the new VI, labview creates no controls in the silver model

    the controls are created in modern style.

    can someone help me solve this problem?

    with all my thanks: Saeid

    If you're down by controls via the palette, then it will drop any type palette you are in.  You are most likely in the range of modern control.  The setting that you are talking about is when you create a command or the indicator by right-clicking on a primitive terminal.

  • get the message "setup.exe has stopped working" when trying to install labview 2011 or 2012 on a windows machine 7

    When you try to install labview 2011 or 2012 on a windows machine 7, I get a message "setup.exe has stopped working". I tried to run setup.exe as an administrator with the same results. I have Microsoft .NET Framework installed on the affected machine 4.5.1. Could be the cause of this problem? Or does anyone know the root cause of this error?

    Hi - are you getting it at the beginning of installation, during or after 100% progression ended?

    Is it fair to LabVIEW you install, or is it drivers too, in this case, what was the last big package that has been installed at the time?

    This can be caused by the NVIDIA chipset driver:

    https://decibel.NI.com/content/message/46299?TSTART=-130

    Thank you
    Sacha

  • FieldPoint for Labview 2011 W7 - 64 bit

    Hello

    I'm currently having problems running FieldPoint Labview 2011 on running on Windows 7 64 bit system. I installed the latest (6.0.9) FieldPoint driver which is compatible with 64-bit systems. However, when I try to make a simple program (see photo A). I met two main problems.

    (1) I'm not allowed to add a control, or a constant to the FieldPoint i/o Point in terminal (see illustration B). The option is grayed out.

    2) there is an error with the FPLVMgr.dll file that is used by virtually every necessary .vi for FieldPoint (see picture C)

    I'd appreciate any help. If you need to know the application, I have a Thermocouple cFP-RTD-122. I'm trying to implement a simple program to read out temperature (see picture D). E PIC shows my MAX.

    Thank you!

    Juan

    Hey Juan,.

    I see you are using 64-bit Windows, but you use a LabVIEW 2011 64 bit as well?  FieldPoint runs on a 64 bit OS, but does not work in the 64-bit LabVIEW environment.  I would recommend installation of environment 32-bit LabVIEW and go from there.

  • Problem installing module time real LabVIEW 2011 SP1

    Hi, I'm new here. I have a problem when I tried to install LabVIEW Real - Time 2011 SP1. Whenever the part of initialization, this message appears: "NEITHER Labview 2011 SP1 32-nit must be installed before installing the OR labview 2011 SP1 real-time Module.» I'm sure that I've already installed Labview 2011 32-bit SP1 and it works well. I use a Windows7 OS and also have Labview 2010 and an older version of Labview 2010 RT module installed. I didn't remove the old version of the software, and I don't know if it is related to this problem.

    Can anyone help? Thank you in advance!

    MrSun87 wrote:

    ... I'm sure that I've already installed Labview 2011 32-bit SP1 and it works well...

    Can post you a screenshot of MAX where are installed Versions of LabVIEW?

    Christian

  • Need link to download LabVIEW 2011 Windows 32-bit SP1

    I looked up the link to download LabVIEW 2011 SP1 32-bit Windows for an hour.  I thought it might be incorporated in the version SP1f2.  Nope. SP1f1 version. Nope.  Research of ni.com do not, Google does not find it, I'm stuck.

    How about this?

    LabVIEW 2011 SP1 (32-bit)

  • LabView 2011 Application launched as COM server via the Application Delphi lance is more if installed under 64 bit, Win 7

    I have a 32-bit LabView Application written using LabView 2011, that installs and registers as a COM Active X server.  I then used the resulting type library with a 32-bit Delphi Application to launch and communicate with the LabVIEW application (Boolean change States and collect data etc.).

    All this worked fine on Windows 7 32 - bit OS but not on Windows 7 64 - bit OS.

    The LabView application seems to work on its own, The Delphi launch application will not launch it?

    I used mmc comexp.msc 32 to set up the COM server to run as servers with launch of site privileges.

    Hi Luke,.

    Thanks a lot for your answer.  I have just managed on the basis of track down the problem almost at the same time, your answer came through.

    My Delphi application is also a COM server, allowing me to start it remotely from another system.  What I forgot, it was that the remote system makes the connection to the LabView Application otherwise the local application of Delphi just is there and does nothing.  I did it it as a work-around a few years ago because I could not the remote application of Delphi to launch the labview application or attaches to it as a running instance directly.

    Thanks again

  • LabVIEW 2011 f2 [x 64]: no drop-down menu of "Targets" in the "Getting Started" window

    Is this normal? I don't remember if selection "Targets" was there at the start, but it isn't here now! I installed the Module, the Module 2011 WSN 2011 Vision and ARM 2011 Module and their icons appear on the startup initialization screen, although there is no ARM Module screws present in the ADE.

    If it's a bug, what should I do to fix?

    Thanks in advance,

    I guess as 64-bit LabVIEW 2011 is not compatible with these modules, they will not fill the list started with targets.  If they appear correctly in 32-bit LabVIEW 2011, it is most likely the problem.

    Brian

  • Can I use AutoCAD 2011 32 bit on my Version of Windows 7 64 - Bit?

    My work computer running a 64 bit version of Windows 7 and when I try to install AutoCAD 2011 (32-bit however) it tells me that it cannot be installed on my operating system. Is there a way to get around this or I'm circled?

    Hello

    I suggest you follow the link to can run 32-bit program on a 64-bit computer?

    32-bit and 64-bit Windows: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

    I would also ask that you contact the software vendor

    http://forums.Autodesk.com/T5/AutoCAD-2011/AutoCAD-2011-quot-you-cannot-install-this-product-on-the-current/TD-p/2964686

  • Wiring of connectors in LabVIEW 2011 problems

    I've just been 'bitten again"by a wiring problem with a connector for a VI in LabVIEW 2011 (I've not seen this behavior in any previous version of LabVIEW to 7.0).

    The question is this.  I (or one of my colleagues, who also noted it), run LabVIEW 2011 (August 2011 release), 32 - bit, Windows 7, 64-bit systems.  I have create a VI using the usual 4-2-2-4 connector of mires and connect the appropriate connector.  I save the VI, then drop it on a block diagram to use.

    In another variation of this problem, the VI has fallen don't watch any connector or, if used to 'replace' an existing wired in VI with the same model of connector, "break" all the sons (because it has no connector when dropped on the diagram).  Reopen and reconsider the VI show that, indeed, the connectors are wired, but when I use the VI, the connector wiring is absent (the VI dropped watch without connectors).

    In the second variant, all right, the connectors appear as expected.  But I then decide to move a connector.  I have open the VI to edit, make a cut of this Terminal and rewire to its new location.  The connector pane presents the new model.  But when I drop the VI on a block diagram, the connector is in its original location.

    Restart LabVIEW, indeed restart the PC, does not change.  The only way to 'fix' this is to disconnect all terminals and a reconnect them.  A nuisance, to say the least, but also an obvious bug.

    Has anyone else seen elsewhere?  I sent to OR, but it would be useful to know 'is it just me?' or not.  In my defense, I've seen this problem on several computers, all win 7/LabVIEW 2011.  I've also seen this with several LabVIEW projects.

    I've attached a file with such a VI "buggy".  When you open it, you will see that the 'Length' indicator is wired to the top of the connector set page.  When I drop this VI on a new VI, however, the connector indicates coming out from the bottom!

    BS

    I was told by an engineer NOR that this problem (a) is real and (b) has been fixed in SP1 release (spring) 2011 LabVIEW.  I have not had a chance to check this point, but (the trusting soul that I am), I consider that this problem has been a "Bug in LabVIEW 2011 that has been fixed in the SP1 Release"and therefore, I am prepared to mark this "resolved".

  • DAqmx and IMAQ pallets do not appear in my palettes of LabVIEW 2011

    Hello

    I use LabVIEW to my University via a Campus license since 2005. I installed it on several computers.

    My problem is related to a new LabVIEW installation on a brand new computer.

    I have the license Site LAbVIEW 2011 Academic just installed and validated (via the License Manager) in this new machine running 64-bit Windows Seven.

    [I also installed the DAQmx and the "distribution of February 2011" IMAQ drivers (downloaded from OR) as well as the NI Vision Software (version for LabVIEW 2011, the same distribution as the LabVIEW 2011).]

    I launched LabVIEW Ant checked to see if everything was there, specifically the DAQmx and IMAQ functions, since I have the cards OR to make the acquisition of data and images. Note that I have not yet installed these cards in the PC. I m going to do only when I would have ensured that all the software is ok.

    The subpalette DAQmx in measurement of i/o functions palette is missing.

    Also, if I'm looking for the NI-IMAQ subpalettes in the range of Vision and movement functions they also lack.

    Notice that all other subpalettes in the range of functions of Vision and movement are OK and there appear (utility of Vision, Image Processing, Machine Vision, and Vision Express).

    Then, I checked if the installed drivers are really there. For this I used the MAX or (measure explore), and it looks like it all everything is there.

    I mean, under NI MAX > my system > software I can see these articles:

    NEITHER Vision TERM 2011

    NOR-IMAQ 4.5

    NOR-DAQmx... several entries

    I checked if the forum or knowledge base in NOR have any clue on what to do, and I found somewhere by the idea of trying to fix the installation via the Windows 7 Control Panel > programs and resources > OR software.  I did this procedure twice, just in case...

    I also tried to remove and reinstall all software (including drivers) and NO, I did it twice. The result is always the same.

    Any suggestions?

    When you install the drivers, you include support for LabVIEW 2011?  If this isn't the case, you won't see the LabVIEW screw in your palettes even if the software is installed.  Normally I expect that the Setup program automatically adds this support, but he can't do it, especially if you have installed the drivers before installing LabVIEW.  See the image below:

  • Development system LabVIEW 2011 fails to install

    I just tried several times to install my new copy of LabVIEW 2011 Suite of Dev, but get an unknown exception (with no details - see photo) from the beginning of the installation of the development system (32-bit English).  I restarted and closed all applications, including the virus scan, but still the same.  I use Windows XP Pro SP3 and have LV 8.6, 2009 and 2010 is installed.  I'm completely baffled as this type of problem has never happened before, and there is no information on the cause of the exception.

    Mike


  • Just LabVIEW 2012. Why am I being asked to download LabVIEW 2011 SP1 f2 RTE Patch?

    Hello

    Recently, I got a new machine (clean install of Windows 8) and installed LabVIEW 2012, with no other previous versions. However, when I ran the Service OR day, he registered "LabVIEW 2011 SP1 f2 R(32-bit) Run-Time Engine Patch" as an update is critical.

    I'm confused; I accidentally installed LV 2011 too?

    Thank you

    No, you did nothing wrong.  time engine run freely installed with LabVIEW 2012 to record for previous versions.  Install the patch.

  • Report Generation Toolkit compatibility with Microsoft Office 2013 and LabVIEW 2011

    Hello

    I design the 2011 Version of LabView to test solid state device and need to create test data after this unit tested.

    When I save the test data in the configuration of Excel after you run the Laview program, it created an error like "error - 41007 is is produced in NI_report.lvclass:New Report.v->... OR reports; Musr you have the LabVIEW Report Generation Toolkit for Microsoft Office installed to create this type of report. The musr toolkit also have an activated license or be in trial mode. »

    Questions: Do I need to install LabView Report Generation Toolkit for Microsoft Office on my computer? If Yes, what is the LabView Report Generation Toolkit for Microsoft Office Version. Where can I find this software?. I use Labview 2011, Windows 7, MS 2013 in the computer.

    Thank you

    Jonathan Tran

    You can try this: http://download.ni.com/evaluation/labview/ekit/other/downloader/2011RGT.exe

    From this link: http://download.ni.com/evaluation/labview/ekit/other/downloader/

  • Ask for a link for Labview 2011 SP1

    I ask for the link to download the Labview 2011 SP1.

    I have a bug that corrects SP1 (damaged Panel before, cannot open vi, see the discussion http://forums.ni.com/t5/LabVIEW/LabVIEW-load-error-code-3-Could-not-load-front-panel/td-p/1895379/pa...), but the download link disappeared.

    Please, if anyone knows tell me the link to download (32 bit).

    I found it here

    http://download.NI.com/support/softlib/LabVIEW/labview_development_system/2011%20SP1/

    Anyway, there are a few problems with the link that you gave to me. I thank you all the same because what is happening is somethink wronk with national instruments site, which is not the same for all countries (web designers should check and fix the bug).

Maybe you are looking for

  • Server.app 5.0.15 in areas of mail multi

    Hi all We must implement a configuration with several e-mail accounts to a single network (open directory) account but with boxes associated with letters completely separated. In detail, we need a configuration like this: For example. a.randy@domain1

  • Time real ADC/DAC for SMPS by using Labview and USB

    Hi all I asked the Sales Department of this same question, so here's a two-pronged approach: I am reserching a control algorithm for power switching, and so far, its performance simulations seem to be good.  Now, the goal is to implement the circuit

  • Error for Live Mail

    Need help > This message has been appearing during 2 days. I can't access live mail but can send and receive in Outlook.com. Yesterday, it seemed that MSN is declining and then returned, is that related? Can't send or receive messages for the Msn acc

  • BlackBerry Z10 unable to get 10.2 updated my unlocked Z10

    Cannot understand why I get the message that I have the latest version of the software (10.1.0.4181) when I try to update to 10.2. I tried the OTA and by BB on the PC link. My phone is unlocked, but has a contract from Vodafone (United Kingdom) SIM i

  • Streaming media files by using Manager.createPlayer)

    Hey guys,. quick question... I have my application to connect to the internet via '; interface = wifi. " and I stream media help Player p = Manager.createPlayer("http://somelocation/blah.mp3"); p.start(); Whenever I run it, it throws an exception: "B