LabVIEW 2011 and Excel 2010: backup problems

Similar Questions

• Need help to make the adjustments to TCP between Labview 2011 and webrelay

  Hello

  I'm using Labview 2011 and trying to establish communication with webrelay (X-WR-4R1-l) to control its relay.

  I downloaded a www.ni.com example but it does not work.  (he was tied with this thread as well)

  I did no changes in the example program, that I do not really understand much codes XML.

  I turned ON all 4 relays this webrelay, but in labview, it reads that the relays are turned OFF.

  and when I click the button on the front panel, it does nothing.

  There are several toolkits labview installed in my PC, namely:

  -labview development system

  -application builder

  -recording of data and control module

  -Database connectivity kit

  -internet Toolbox

  -report generation toolkit for Microsoft office

  I'd appreciate it if someone could guide me in this configuration process.

  Thank you

  OK, we're making progress...

  Something seems truncated. Is there something after realy4state in the received string? Because the string is longer, you will need to adjust the number of bytes read. It's more than the 157, which corresponds to the current setting.

  In all cases, their example LabVIEW is a unique feature of relay. You need to look at section 3.2 of the manual that you set for the correct orders. Now there is always a number between 'relay' and 'State' for example:

  1State = 1 for relay activate relay 1.

  You must do two things:

  Write a trainer who composed the correct channels based on the selected relay.

  Write a parser that retrieves the status of all four relays relay. (the offsets will be different, for example)

  I recommend you to treat the four relays as an array of four Boolean values.

• Deal with failure when using LabVIEW 2011 and DSC MODBUS communication

  I'm currently reading from operating records a PLC with MODBUS/TCP. I confirmed that the PLC will update the values and in response to a MODBUS communication correctly by using a third-party program called Modbus Poll. However, when I try to query the PLC using the LabVIEW shared variable engine, I am unable to read the values of the same addresses that I consult with Modbus Poll.

  My installation is simply to a PC directly connected to the controller via Ethernet without a router between the two. I'm using LabVIEW 2011 SP1 with the DSC module.

  I opened the Manager of distributed systems OR to display the State of all variables in the Modbus Library that I created, and I noticed that the ILO CommFail permanently the value 'true '. All other variables with a 'read' access mode signal "failure of process". I tried to restart the process and stop and start the local variable engine without success. I also restarted my computer several times to see if any services did not exist, but this does not appear to have solved the problem.

  Finally, I resorted to listening to communications on the network card I have the PLC connected via Ethernet using Wireshark and found that while Modbus Poll communicates with PLC, number of MODBUS and TCP packet is sent and received. However, when using only LabVIEW or the DSM OR communicate with the controller, there don't seem to be any communication on the network card.

  Something that may be interesting to note is that I could communicate with the PLC and to read values with the DSM just once, when I understood everything first what address I should be reading of. All of this has stopped working shortly after. Prior to this, 'CommFail' was not generally set to 'true' with my current setup. Thinking it was my firewall, I have since disabled my firewall, but this seems to have had no effect on the problem either.

  Any help on this would be appreciated.

  So, I thought about it. It turns out that the IP address of the server i/o MODBUS must be set to the address of the MODBUS slave, not the local computer. The address of the i/o MODBUS server is defined by the navigation in the Explorer window projects, expanding the variable engine shared library for MODBUS and right click on the server MODBUS (for example Modbus1) item and select Properties.

  In addition, the addresses seem to be shifted by + 1.

  Thanks for the tip so.

• ThinAPPed Excel 2007 and Excel 2010 - who wins?

  Hello everyone.

  I have a curious question to submit.

  I use ThinApp 5.0 in a test environment.

  I created an application with ThinApp with Excel 2007. Everything is OK, the application and Excel 2007 work perfectly and there is no problem with ThinApp (Excel 2007 is used in this application ONLY and cannot interact with anything).

  The problem arises when I have 'transport' of ThinAPPed enforcement in an environment where Excel 2010 is already installed.

  If I double-click a. Xls file, the file is loaded from Excel 2010 = Correct.

  If I run the application Excel 2007 (ThinApp) and explore and I click two times on a. Xls file, the file is loaded from Excel 2007 =?

  If I run Excel 2007 (ThinAPP), Excel 2010 and Explorer double click on a. Xls file, the file is always loaded from Excel 2007 =?

  The question is: How can I force to open the files. XLS (or other) Excel 2010 always and forever (even if charged) of Excel 2007 in ThinApp?

  Already test:

  Package.ini = file types = deleted .xls and .xlsx for [Microsoft Excel 2007.exe]

  HKEY_LOCAL_MACHINE.txt = deleted all .xls and .xlsx

  ChildProcessEnvironmentDefault = external

  Thank you.

  OK, I found the problem.

  With Office 2007 and Office 2010 introduces a new "feature" that allows you to open documents on the same instance open.

  To fix (it is more accurate to say "escape") I used "Open in a new instance", explained on this link: http://ptihosting.com/blog/it-blog/force-excel-20072010-to-open-in-Separate-window/

  In practice, by pressing the button on the DX. Xls file, it seems "Open in a new instance" and the file is still open in Excel 2010.

  I hope this can help others with the same "problem".

• Microsoft Word and Excel (2010) do not appear when you attempt to associate file types with applications.

  Word and Excel are installed and are working on the new computer from my parents.  They have the word 'old' and the files whose file extensions are not associated with Word or Excel is excellent.  If they open Word (or Excel), they can then open these old files successfully.  On the other hand, if they double-click on the file, the popup shows the type of file is not associated with an application.  When asked to choose an application to associate, the list does not include Word or Excel.

  The same is true when you use the programs Start/Default/associate a file type or Protocol with a program.  Word and Excel are not shown as applications installed on this computer.

  I did an uninstall and reinstall, and the old word files and excellent files are still not associated.  I was then able to associate using the types of programs/associate of start/default etc..  So I think I'm good to go.  This occurs naturally, and it was a big pain.  Not what you want to experience, unfortunately, visitors.

• Output PDF and Excel cell spacing problems

  Hi all..
  I have a report and a model whose production should be both in PDF and Excel.
  
  Lets say I have two tables put one under the other. (Table 1 and table 2 below it..)
  
  Table 1 has 5 columns and table 2 to 30 columns.
  In PDF format because it is difficult and ugly to display 30 columns, I made 6 (very small font) fonts
  
  Output PDF seems fine. But, when I open the reort in excel... all dirty sound upward and ugly.
  Width of column 1 of the table is very uneven. lI noted that table 1, table 2 coulmns width are the same...
  For my requirement, they must have widths separated... Also... When I open the report in Excel, I always get in 6 font size which is ugly
  
  I want the table1 column width and width of column 2 of the table in as separate Excel...
  
  How to achieve them.

  In the RTF model
  Add this as the first statement

  in the rtf template, you can add a conditional section for the different output format.

  
  
  
  or
  
  
  
  

  Add the size of font font size programmatic, rather than by using word

• SmartView 11.1.2 - planning and Excel formulas giving problems

  Hello
  
  I use Smartview 11.1.2 with HP 11.1.2 when I open a form online and I write in a cell
  = 10
  
  and because I wrote a different number such as 5, there still with = 10
  
  so, someone has problems with you start to use a formula in a cell, and after that I tried to replace it with a value?
  
  Thank you

  It would be probably fixed in a patch. You may have to contact the Oracle Support for more information.

  HTH-
  Jasmine.

• Excel 2010 and labview 2010

  I think that this may have been covered, but if anyone noticed all the differences in the properties of the ActiveX or methods in labview when working with excellent 2007 versus excel 2010? I know at one point Microsoft had changed a few things excellent 97-2003 "and instead select 'value' in your method, you must now choose"value 2". Is the real wait even for excel 2010? I am currently using excel 2007 at work and 2000 at home, and when I opened my code at home, my call nodes 'have the wrong son' still all required entries are correct. Same code on excel 2007; lot of son and the code will be run. I'm just curious to know if anyone has tried to use labview 2010 and excel 2010 together and made a work? I'm opening 1 workbook and wrote to 4 different excel sheets using Windows XP, excel 2007 at work and have windows 7 and want to use excel 2010 home and prefers no problem or to all the least know what are potential problems. Sorry if this confusion. I think it's the best way I can explain that I have MY head wrapped around it yet.  I do not want to write the same code twice for different versions of excel. (write and test at home, then re - write at work)

  http://digital.NI.com/public.nsf/allkb/177D720A428CA72B862567EC00757F0C

  This is an example of what I'm talking about

  Myke,

  While I don't have excel 2010 available to try and see, Microsoft (and MSDN) has a huge amount of information about calls in all versions of Excel.

  Excel 2010 development resources: http://msdn.microsoft.com/en-us/library/ee658205 (office.14) .aspx

  Excel 2007 development resources: http://msdn.microsoft.com/en-us/library/bb979621(v=office.12).aspx

  I hope that helps you start, because I don't have access to excel 2010. Let me know if it works for you.

  Kind regards

  Kyle Mozdzyn

  Engineering applications

  National Instruments

• Communication problems with third-party modules using Labview 2012 and cRIO-9024.

  Hi all

  I recently bought the module moviemed 1501 AF but I am unfortunately not able to communicate properly with him. I followed all the instructions in the Manual, but nothing helps. I downloaded the drivers and software recommended, but whenever I try to add the AF 1501 in special edition module C-series (in the menu drop-down), Labview does not see it.

  When I installed the driver for the module he asked for what version of Labview, I was running (2009 or 2010, no option to 2012), I chose 2010. Could be the problem?

  Thank you!

  Hi Mswn,

  I would just like to ask if you can see other modules of the series-C on your chassis - other modules appear correctly?

  I also see that MoviMed is no indication that they offer LabVIEW 2011 and 2012 of pilots to the AF 1501 hereproduct page. Here are the drivers you are using?

  Andy C.

  Technical sales engineer

  National Instruments

• Windows 7 Excel and Word 2010 jump lists appear only not on the Start Menu

  Hello

  I would like to apologize if this is in the wrong section... I got here by looking at another thread, which ultimately does not solve my problem. I read the same solutions on dozens of different threads and not one has done something to help, so I thought I'd try to ask once again, indicating that I have tried and see if anyone has any other ideas!
  ... I also like to apologize if "jump list" is the wrong term. I mean, it is when I click on my Start Menu, and "Microsoft Word/Excel 2010" icon is the small arrow on the side right does not allow me to click everywhere for what files I recently consulted on Word. I have exactly the same problem in Excel 2010, but No problem at all for Powerpoint 2010 and it seems that programs such as Notepad and so forth are very well as well.
  What I did:
  1. right click on 'Taskbar', click 'Properties', select the "Start Menu" tab, under "Privacy", I checked the boxes ("Store and display recently opened programs in the start menu" and "Store and display recently opened items in the start menu and the taskbar").
  Make a right-click on 'Taskbar'-> properties-> select Menu-> customize-> items recent fact make it appear a list but less it is tab and not attached to the application (which is what I want to xD).
  My original problem was that the list of recent items for Word has not been updated and it was stuck on what he was about 3 months - which eventually prove needless after I lived my computer and deleted, renamed and moved a bunch of word documents! Unchecking the boxes got rid of the arrow completely, and when I checked hide them he refused to reappear for Word and Excel.
  2. I was at '% AppData%\Microsoft\Windows\Recent\AutomaticDestinations' all files deleted from here and restarted my computer - ' 1b4dd67f29cb1962.automaticDestinations - ms' seem to be for the word, and I think that ' 3d961d1bb3da929c.automaticDestinations - ms' are to Excel. I have them I deleted, I moved it out of the folder, I renamed them, I sang for them, etc. etc. and every time it did not work.
  This seems to be a really popular solution that works for most of the time everybody... it does not work for me!
  I've also been to '% ' AppData%\Microsoft\Windows\Recent\CustomDestinations and deleted everything from there.
  3. I checked that related to open different file extensions in Excel and Word programs are associated with Excel and Word. Everything seems to be strong in that Department.
  I use Windows 7 Service Pack 1 and fight with versions of Word and Excel 2010!
  Then... I don't think anyone has any other ideas?
  Thank you in advance!

  I emptied two recent used folders but did not work.   Then I fixed my office installation to add/remove programs in the control panel and that did the trick.  I have office 2007 and 2010 installed, but make sure that I only use 2010.  Will probably uninstall 2007.

• reset the ftp labview 2011

  Hi, I was working with LabVIEW 2010 and I have programmed a VI to transfer a file and check containing the path remote, everything was fine. Now, I've changed to LabVIEW 2011 and I can't find the function "reset ftp" and my VI no longer works. I'm not sure of the origin of my problem, I guess that it is not working because I do not have anything to reset the conection or if I need to use the other function to fix this.

  I have programmed a new LabVIEW VI 2011 without the function "reset ftp" and it does not work in any case.

  I hope you can help me.

  Hi Eric_NI, I solved my problem. I checked the block diagram of the "get file" function and I found the correct way to implement FTP. Also, I use 'active = False' for all the functions that have the "active" option

• Font size too small LabVIEW 2011

  Hello

  I'm new to LabVIEW 2011.  I'm running a problem when I load LabVIEW all the font size seems to be very low and I don't know how to do more.  It is difficult to see where everything is small.  Please see photo attached below.

  I tried to fix LabVIEW 2011 and I even uninstalled and reinstalled but the police still proved to be small.

  Help, please.

  Thank you so much in advance.

  Marlin12

  What operating system? Have you changed a setting in the operating system, like maybe the default font size or DPI settings? Try deleting the file labview.ini and have LabVIEW recreate from scratch (it will be repeated when you start and it can not find). You can also try adding these lines to the labview.ini file:

  appFont = "Tahoma" 13
  systemFont = "Tahoma" 13

  dialogFont = "Tahoma" 13

• How to run the VI developed in labVIEW 2011 in its previous versions

  Hi all

  I am currently using LabVIEW 2011 in my PC at home.

  But, all my school's computers are installed with LabVIEW 2010 and 2010 SP1.

  How to run the VI developed in LabVIEW 2011 in its previous versions?

  Is there any conveter why?

  Concerning

  Prasanth T

  Open the VI in LabVIEW 2011 and use the file menu option, save for the previous Version.

• update of LabVIEW 2011 & 2012

  I currently have installed LabVIEW 2011 and runs OK on my laptop. Each quarter, it seems that we get a new series of DVD from National Instruments. Currently we have sent a package of DVDs for the first quarter of 2012.  Should I just use these DVDs and reinstall them to help on the current installation of LabVIEW or should I remove the last version before installing the new updates of the new series of DVDs. If I currently have MAX configured for a device group and the tasks that they will remain the same without new installation erase them?  Also, I have a couple of tools, like code capture tool, circular buffer, etc. installed on the laptop, they will always be in the new installation of update or I have to go back and reinstall these tools?

  double post and you marked as resolved. Why ask again?

• My system has been installed with Microsoft Office Word and Excel. Shouldn't have received the full version with all applications?

  confused

  I bought a laptop 2 days ago and has a windows 7 Home Basic 64-bit operating system. but the pre installed ms office programs were only of ms word and ms great.  is not supposed to have the office programs ms integer?

  Some manufacturers will offer a basic edition of Microsoft Office, called Office Starter 2010, which includes the only versions of Word and Excel 2010 database.

  It does include other applications such as PowerPoint, Access, Outlook, OneNote and Publisher. If you need additional programs, you can upgrade Office Starter 2010 in one of the suites such as Microsoft Office Home and Student, home and business or professional premium edition.

  You can make the purchase of in Word or Excel Starter editions too. Just run two programs and click on the button buy under the Home tab.

  What is Office Starter 2010? - Microsoft Corporation: software...