LabView 7 Express: connect to a projector

Similar Questions

• LabVIEW 7 Express will not wire connections

  I use an old computer at work that has LabVIEW 7 Express. When trying to do a VI, I can place sub - VI on the block diagram, but I am unable to what wire. In addition, I can not change the size of text boxes or graphics on the front panel.

  Is there some setting somewhere that tours - on these features?

  Did you see the second part of my post?  Looks like you got the wrong tool selected.

• How to document iMac to my apple tv 2, but sending audio to the Airport express connected to my hifi

  I have an iMac, a macmini an express airport. I want to send 720 p video to the Apple TV 2 iMac (or macmini) but send audio to the express from the airport which is connected to my stereo. If the apple TV 2 will serve as a video receiver connected to my projector on the ceiling. (I don't have a way to use a hdmi cable). This is the reason why audio must be sent to the hifi differently.  Alternatevely because the macmini is connected by USB cable to my hifi (to my dac), perhaps there is a way to send audio from a movie to the stereo through audio external USB card (it is the dac) while reflecting the macmini for the Apple TV 2...

  in iTunes, you can select more then 1 speaker output could be the express and then mirrored to the appletv in the manner of STDS, if is not in iTunes then I think that you need a third party such as the wing option

• 4th generation Apple TV connected to the projector

  I have an Apple TV 4th generation connected to a projector with a Kenex of HDMI to VGA with Audio for the 4th generation.  Whenever I want to play Netflix or HBO NOW I get a black screen. I can only here the sound and I get a black screen.  It works fine when I use other applications.

  What can I do to fix this?

  I would really enjoy HBO NOW and Netflix with this number.

  I think that your card does not support HDCP on the HDMI connection, which is required by these suppliers copy protection. Because you want to convert it to VGA, this isn't surprising, because an enterprising hacker could extract the digital video stream. Most of these adapters are sold "educational purposes", not the home entertainment, and that's why. That said, if you look diligently, you can find a suitable adapter. The educational goal of the KENIMBENI is actually mentioned on the Apple store page http://www.apple.com/shop/product/H9139VC/B/kanex-atv-pro-x-hdmi-to-vga-adapter-avec-audio-prise supported, as well as a comment by the user that it cannot handle the HDCP.

• I use hyperlinks of Keynote, but they are not working when I connect to a projector AV. Any ideas?

  I use hyperlinks of Keynote, but they are not working when I connect to a projector AV. Any ideas?

  Hyperlinks don't work in the presentation on the projection screen, not 'View presenter' on Mac to display.

• Satellite Pro C70 - could not get the image when it is connected to the projector

  This machine has been purchased for use in the classroom with projector and smart board. When it is connected to a monitor, the second screen works fine, but when it is connected to the projector DLP Epson, the computer screen and the projector are the two laptop PC empty of other manufacturers of work correctly when it is connected to the projector.

  Can you help me?

  Message has been modified: name of the laptop has been added to title

  What laptop do you speak?
  .. .and what operating system is preinstalled on this laptop?

  You use the pre-configured Toshiba system?

  Is the resolution of the screen for both devices (display and external monitor) set correctly?

• This cable is required to connect to a projector

  I have a Macbook Pro (with the Retina display), bought in early 2013.  Should what cable I to connect to a projector?

  It depends on which input ports your projector.

• LEGO Mindstorms 2.0 crashes at startup when LabView Signal Express is installed first

  When NI Circuit Design Suite education edition is first installed in a computer and the LEGO Mindstorms software second, the LEGO Mindstorms software does not work, he reported the following:

  Error: A required file is broken

  Possible solutions: reinstall the driver of LEGO Mindstorms NXT (tried but does not work)

  Error code: 1003

  Ordinal not found

  The 18 ordinal not found in the library of dynamic links NIVISV32.dll

  Error loading "fantom.dll".

  The operating system cannot run %1

  On other computers the LEGO software starts, it displays the part of the initial screen and then a small window will open saying that the Mindstorms software has made an error and that it will close. The previous report does not display.

  If LabView Signal Express is uninstalled and reinstalled the software, LEGO, the LEGO software works.

  I downloaded and installed the new and old of the NIVISV32.dll versions and is not correct the problem. I went as far as version 4.20 of the dll because it is dated in 2007 and dll files installed by the LEGO software when it works is also dated 2007, but if I install the dll without uninstalling LabView Signal Express, the continuous LEGO software does not.

  Please advice how to fix this without having to uninstall first LabView Signal Express. If the LEGO software is installed first, LabView Signal Express will use and no not to replace the old version of the dll 2007 installed by the LEGO software? Y at - it an update of the LEGO software that corrects this problem?

  I repeat: I know a solution is to uninstall LabView Signal Express, install LEGO Mindstorms and then reinstall LabView Signal Express but I have 60 computers already cloned and deployed with this problem, so I don't want to go to this long process to solve the problem. Computers use Windows 7 and the problems occur on both 32 and 64-bit versions of Windows 7.

  Any ideas?

  
  

• LabVIEW Signal Express 2012

  We have Labview 2012 Signal Express (version 6.0.0) installed on an XP computer and we want to upgrade to a Windows 7 machine.  Will be the last version of Labview 2012 to work on the Windows 7 machine?  The 2012 Labview Signal Express is used to control a cDAQ-9172 with module 4 channels thermocouple.

  It's the Commission of LabVIEW. Please, click on Options and ask that the moderator moving your question to the Board of Directors SignalExpress. LabVIEW itself runs on Windows 7, but they are two different products and not many people here use SE.

• Cannot run executable LabVIEW on desktop connection remote

  I have a couple of executable files, which are compiled using a LabVIEW 2011 development system, installed on a Windows XP computer.  These programs run fine when I double-click the icon while sitting at the computer.

  If I connect to the phone remotely from another Windows XP computer using Remote Desktop connection, I can use the remote computer normally except for the executables LabVIEW.

  When I double-click on one or the other, I get the error message displayed in the attached file. The part of the text of the report has no useful information, just two lines that seem to be field for e-mail names.

  What gives?

  Remote debugging is not a good substitute because it requires the executable file already be running.

  I was able to run two executables LabVIEW on desktop connection remote to a virtual machine of Windows 7 with 2 GB of RAM, running on a MacBookPro using Parallels Desktop.

  This confirms that the problem was insufficient for memory resources.

• Laptop screen disabled when connecting to a projector

  Original title:

  Hello, I am trying to connect to a projector Acer H5360 to my computer dv9750 Pavilion laptop under Vista Home Premium using an HDMI cable.

  Whenever I connect the projector, or noting happens and typing FN + F4 I can have my proposed office or automatically after a certain time, my office is planned (without typing anything). In both cases, the office disappears from the screen of my laptop (!)
  The only way to have my laptop active screen is again by disconnecting the HDMI cable AND it's not completely deterministic: it happens that the laptop screen remains inactive after extraction of the HDMI connector and until the power is cycled
  My question is how can I configure the system to always reflect the tower to the projector screen, whenever the projector is attached, while leaving the tower still active screen? before, during and after the setting of the projector.
  I would add only that I did not imagine it's be so complicated to just fix a projector. For example, when I move the same projector with the same cable to my xoom Tablet I just see projected! without doing anything more than the * physical connection *.

  How many times do you have to press the key combination?

  FN + F4 key combination is to switch between monitors. Try pressing the fn + f4 several times until you get show both monitors ON.

  When the monitor of the laptop is turned OFF and the projector is on, press the key combination, the projector must be OFF and the monitor of the laptop must be turned on. By pressing the key combination twice turns the laptop screen and the projector. There should be no instance that both will turn OFF.

  If it does not try to activate your dual display:
  Right click on the desktop-> Output To-> Intel Dual Display Clone-> notebook + monitor. It can vary in defense on your installation, I use a laptop HP and Acer LCD as a second monitor.

  Multiple monitors: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

• Connect to a projector option does not.

  Dear concerned,

  I work for an NGO, and we purchased licenses for Windows 7. Now, one day I'm in transition all computers from Windows XP to Windows 7.

  The problem I have is that on most of the PC like my computer laptop (Dell Latitude D610), Dell Optiplex GX 520, Compaq Evo D510 Small Form Factor option to connect to a project does not work. Earlier, these systems to connect with the projector when it had XP on them but since after Win 7 its does not work. Even in the resolution of the screen I can't connect to a projector or Windows + P option to connect to the external display.

  I have no idea how to solve this problem. Kindly guide me to get out of this problem.

  Kind regards

  Fahad.

  Your systems are quite old. There may be no Windows 7 graphics drivers for them.

  If you do not have Windows 7 installed for the graphics hardware that they will not work with a resolution VGA Standard and the conduct of the second monitors or projectors graphics drivers will not be possible.

• Problem with the resolution when you connect to a projector

  I regularly used my laptop connected to a projector via a cable VGA for PowerPoint and video clips view in Windows Media Player.   It is automatically detected and adjusted for different sizes of screen of the laptop screen (1366 x 768) and projector (1024 x 768) and projected with success.   Recently I connected the laptop to a second monitor - also 1024 x 768 - instead, and even once, it fits perfectly.

  It suddenly stopped setting for the resolution of the projector; When I go to the resolution of the screen, the option to set the resolution of the second screen is grayed out.   No matter if I use extend or duplicate, he insists that the two screens are 1366 x 768.   This has happened with two projectors, all two used to work properly.   I also tried different VGA cables.  The end result is that the image of the projector is hurry to tray.

  I can connect fine to the second monitor via the VGA port and sometimes with different resolutions for both screens.   I can also connect to a TV via an HDMI cable.   I can't try a HDMI cable for the spotlight as it is ceiling mounted, and the other is old and is not an HDMI connection.

  I checked the drivers and they seem to be up to date.

  My laptop is a Dell Latitude running Windows 7.   The graphics card is an Intel HD Graphics 3000.   I tried many suggestions already given on these forums without success.   The real puzzle is that it was working fine and nothing I can draw has changed except that I connected on the other monitor.

  Hi Tony,.

  Thanks for the reply with the status of the issue. I'm sorry to know that the issue is still unresolved, your efforts to solve this problem are much appreciated.

  I suggest to follow the method below and check if that helps:

  Method 1: Perform a system restore.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  System restore WARNING: when you use the system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Method 2: Uninstall all hidden devices:

  Step 1: See the article below to activate the devices hidden in Device Manager.

  Look at a hidden devices

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  Step 2: After you enable hidden devices, remove devices from Device Manager.

  1. press start.

  2. type device manager in the start search box.

  3. Select Device Manager in the search result.

  4 uninstall everything that are grey also uninstall the drivers to display completely.
  5 restart the computer and install the drivers to view the manufacturer's Web site.

  Hope this information helps, just reply to the State of the question to get help.

  Hi Rizwan

  Unfortunately, I do not have a restore point old enough until the problem occurred.   I have not found any that was relevant in hidden devices, but in normal Device Manager mode when I clicked on "monitor" it opened a "Generic PnP" entry even when there was no extra monitor or projector fixed.   When an additional monitor has been attached, there were two of these entries.   I disabled them both, and I found that I can now adjust the resolution of a second monitor to a different setting of the laptop screen.

  Thanks for your help.

  Tony

• Unable to connect to a projector

  original title: connect to a projector

  Dear friends,

  Please open the link http://windows.microsoft.com/en-US/windows7/Connect-to-a-projector     
  I can't use this option in my laptop, my hardware of the laptop works very well. same first popup Windows + P also do not do it please help me.
  OS is authentic.

  Then the input on the TV should be located on the port of c.p.,.

  Windows + P and use in dual display.

  See if you work in these menus does nothing,

  

  

• Airport Express connection speed

  I have 40 MB/s internet speed down.  I have a new modem century link (recently moved home - new internet service) feed my Airport express.   Until a few days ago I received all 40 Mbps through my Airport Express wireless.  Now it is capped to 10 for some reason any.  The only thing that has changed is that I had to power cycle my modem to redirect a couple power cords in my basement.  When I connect my computer to the same ethernet cable that feeds the Airport express I get the full 40.  I tried to restart everything. I tried all channels 2,4 ghz manual on the express (I didn't configured 5 GHz because I really don't need right now).  I don't know why its running at 10 and not 40 like a few days ago.

  What is the brand and model of your modem provided by century link? What exact model is your base station AirPort Express? Is the Express directly connected to the modem by Ethernet?