LabVIEW 8.6 sound and measure suite not installed properly under Vista 32 or 64 bit

Similar Questions

• KB975051 updates and KB976882 will not install on Windows Vista. They are Office and Outlook 2003. Anyone else having the same problem?

  Tried several times.  Windows Update keeps prompting me to install but it fails every time.

  I was finally able to solve the problem of not being able to update KB975051 and KB976882 by taking the following measures:
  In Google I typed in 'the kb976882 will not be installed.  Under options, I got "Download Details: update for Microsoft Office Outlook 2003 Junk...» "the site of Microsoft.com/downloads.  I downloaded from this site and then also picked KB975051 on other popular choice located lower on the page and done the same thing.  I don't remember this solution being a few days ago.
  I hope you find that this approach works for you as well.  Ignore the entrance of miss under my name as proposed in another comment response.  I have missunderstood as a way to comment on...
  Craig

• hard drive is damaged and I can not install my windows vista product

  HII

  I bought my computer hp laptop with windows vista home primume software.

  A few months ago my hard drive has been damaged and all data lost

  I have the product key and the number of product

  can I reinstall the product from the microsoft web site or other means?

  Thank you very much

  Shay

  If you replace your hard drive, please contact HP:

  How to get Vista recovery Media to say things back to factory settings .

  There is no Vista free download legal available.

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=au

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• During the installation of a program, receive the error message that Windows Installer is not installed properly on Vista

  I tried to install a program and I got an error message that says "Windows Installer" is not installed correctly and I need to contact the support staff.  I get also a message when I log that says steetings.ini is occupied by another program and it will not allow the sidebar to come.

  Try the Windows Installer Cleanup utility to troubleshoot the problem with Windows Installer:http://www.softpedia.com/get/Security/Secure-cleaning/Windows-Installer-CleanUp-Utility.shtml.

  For the issue of the Sidebar, do a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• ChkDsk does not work properly under Vista

  On Toshiba Satellite laptop computer Windows Vista, I have planned a Check Disk to run after reboot. I checked the two boxes (automacticly repair files and scan/repair bad sectors). I restarted the laptop and he appeared as chkdsk would run ok, because I saw this message:

  checking file system on C:

  The type of ntfs file system

  a disk check was schduled

  Press any key to cancel

  I do not press any key to cancel. But within 5 seconds to start, he said something like: "the disc is OK", then finished checkdisk and restarted windows.

  Why not run a full scan? How can I force it to run a full scan?

  If you don't mind, would you care to try again?

  Use these instructions...

  Start button > in the search box, type cmd > look at the top left, right-click on cmd.exe > click on Run As Administrator > press the Enter key.
  Now, you will see a black and white screen. It's your cmd window.
  At the flashing prompt type this... chkdsk/f/r
  It is preferable that you copy and paste that above the line of command to avoid the misspelling. There is a space between 'chkdsk' and ' / '.

  Press the Enter key.
  The window will say something like... (I'm paraphrasing)... he can't do it now, but it will restart. You want to do, o/n.
  Type 'y' as in Yes > press ENTER.

  Output of cmd window.
  Restart your computer > system will start the disk check.
  It will take a while... a long time. Sit back and wait. Do not turn it off.
  The system will restart when the disk check is complete.

• Disk defragmentation is running very slow or does not work properly under Vista

  Disk Defragmenter takes a long time (more than 2 hours) and doesn't seem to work properly.  I'm not sure what to do or how to report this to get help to fix the problem.  Any advice would be appreciated.

  Thank you

  Diane

  * original title - how to solve a problem with the Windows Disk Defragmenter? *

  Hello

  1st race SFC and CheckDisk to ensure the integrity of disk and file. It is possible that you have something
  stop defragmentation run then after that these see the next message.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  How to difficulty Chkdsk will not run at startup in Vista
  http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.html

  ================================

  Here are excellent free 3rd defragmenters party which I use.

  Very powerful - FREE - MyDefrag
  http://www.MyDefrag.com/

  Defraggler - free - defragment your entire hard drive or individual files - unique in the industry.
  This compact and portable Windows application supports NTFS and FAT32 file systems.
  http://www.Piriform.com/Defraggler

  Auslogics Disk Defrag - FREE - works easily and does a great job
  http://www.Auslogics.com/en/software/disk-defrag

  Also check out these and other "related links" here:

  How to run Disk Defragmenter from the Vista command prompt
  http://www.Vistax64.com/tutorials/81786-Disk-Defragmenter-command-prompt.html

  How to change the planning for Disk Defragmenter in Vista
  http://www.Vistax64.com/tutorials/72832-Disk-Defragmenter.html

  How to have a task to wake the computer to run in Vista Task Scheduler
  http://www.Vistax64.com/tutorials/166809-Task-Scheduler-wake-up-computer.html

  I hope this helps.

• Updates do not install, Sections of Vista does not and cannot start the Audio Service

  I try to install the updates on windows update but important as the service package 2 do not work, they start then stop and say failed code "WindowsUpdate_80070643"

  boxes keep popping up saying some files are damaged or not installed properly and that I should reinstall as a file call... system32\AVRT.dll. Windows Media is not no longer works.

  My Audio service is not running, I'm not sure that there is a problem in microsoft windows but the button to switch on the audio does not, and a box pops up saying it does not yet have another pop up says that everything works.

  any help? Please

  Hello
   
  a. updates have you tried to install?
  (b) button to switch on the audio of your computer are you using?
  c. what exactly happens when you try to run any audio/video file?

  You can try the steps outlined in the article below and check if this help.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  For audio problem you are trying to run the troubleshooter which may help. It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

  1. open the troubleshooting of Audio playback by clicking the Start button, then Control Panel.
  2. in the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on the audio playback problems. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  You can also try to update check you and sound card driver if it works. The article below will help you do.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also, check if the following services are set to automatic.
  a. Windows Audio
  b. Windows Audio Endpoint Builder

  Here's how:
  1. click the Start button, type services.msc and press ENTER.
  2. go to any services mentioned above at the same time, right-click on it and select Properties
  3. click on the tab general, select automatic for startup type. Also click the Start button, if it is not started.
  4. click the Dependencies tab and make sure that all addictions services are set to automatic. Then click on the OK button.

  After return to that exact error messages we can help you better.

  Let us know if it works.

  Kind regards
  Umesh P - Microsoft Support

• I just bought Office 2010 and it will not install on my Dell Dimension E520

  Yes, I still have a Dell Dimension. The problem is Microsoft office 2010 home and student not install on my computer because it says I need service pack 1. Which I've improved on my computer.

  I recently had to reinstall the operating system (Vista Edition home premium)

  and I go through updates and I checked to see if it installed service pack 1, and he did it successfully. so, what's the problem?

  See that this thread said to check your version of Service Pack and also try to install SP2 for Vista if you have not installed it.

  MS Office Home and Student 2010 installs?
  http://social.answers.Microsoft.com/forums/en-us/OfficeInstall/thread/85bb705f-C3ED-4a2b-A12a-588cbbc8ec35

  What happens if you try to install Office to locate the installer exe and a right click that and select 'run as administrator '.  Do this even if you are an administrator.

  See if allows you to temporarily disable any Anti Virus program running.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  950093 how to use the System Configuration utility to resolve configuration errors in Windows Vista
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 950093

  You have trial versions of Office already installed on this machine?

  Convert a trial to a suite Office 2010 or program to a full retail version
  http://Office.Microsoft.com/en-us/project-help/convert-a-trial-version-of-an-Office-2010-suite-or-program-to-a-full-retail-version-HA101886436.aspx

  Convert your trial to a full-product version
  http://Office.Microsoft.com/en-us/buy/convert-your-trial-to-a-full-product-version-HA101812668.aspx

• I have PSE 7 and with official serial number. I have a new laptop and I can not install PES. I'll gett a mistake: not good serial number... :( I uninstalled the PSE from my old computer software. Can someone help me?

  I have PSE 7 and with official serial number. I have a new laptop and I can not install PES. I'll gett a mistake: not good serial number... I uninstalled the PSE from my old computer software. Can someone help me?

  To locate the serial number:

  ----------------------------

  http://helpx.Adobe.com/x-productkb/global/find-serial-number.html

  Error "serial number is not valid for this product". Creative Suite
  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-valid-product.html

  Error failed to validate the serial number | CS6
  http://helpx.Adobe.com/Creative-Suite/KB/unable-validate-serial-number-CCM.html

• Control SMART and short CIOS not installed? New notebook

  Hello

  My parents sent me the 4440 s of HP Probook. I turned it on and it was working fine. No problem at all, but the hard drive was very small. Only 59 concerts. So, I took the hard drive from my old laptop (which still works. 300 concerts) and put it in the new laptop. When I turned it on this pop up.

  HP PC Hardware Diagnostics UEFI

  -----------------------------------

  Version 1.6.0.0 - BIOS

  then it gives me the opportunity to perform a verification of memory, hard disk check, language and output. Memory passes test, but when I do the hard disk (quick audit and comprehensive check) check it says controls SMART and short CIOS not installed.

  When I click on leave peripheral saus to boot not found, please install system of operating on hard drive.

  Here is some of the best. I took the hard drive out and put the new hard drive and little return in the new probook, and the same message appears. I don't know why. I can't figure out what it could be. My father-in-law has a good knowledge of computers, but unfortunately, on the phone it cannot be a great help.

  Someone save my new laptop beautiful!

  The diagnostic program has done a small partition on the hard drive to it. When you have removed it, so that has UEFI. You need to reinstall as the only one available is the one stored in the BIOS.

  Here's that and your BIOS update.

  This is for Windows 8.1 as you say this is a brand new, that is my logical guess.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5269090 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125646_1%257CswEnvOID%253D4158%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  UEFI: http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5269090 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125304_1%257CswEnvOID%253D4158%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  I hope this helps. I used the basic model for it, and it should work. If you have any problems, send the product so that we can check the cross. However, there should not be a problem.

  JHS

• KB3102467, KB3124001 and KB3135449 could not install

  KB3102467, KB3124001 and KB3135449 could not install Server R2 2012

  It is a forum for specific consumers.

  You will find the Windows Server support in these forums: http://social.technet.microsoft.com/Forums/windowsserver/en-US/home

  Specific Windows Server security sub-forum: http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserversecurity

• KB973688 and KB954430 do not install. Windows Update loop on them. they install ever.

  KB973688 and KB954430 do not install.  Windows Update tries to install these two updates, but they never complete the installation.  Tried to install KB954430 manually, but it would not install.   Event Viewer event id 7023 windows module Installer service ended.    Dialog box shows HRESULT:0x800736FD {7B30B69B-036c-b7e0-a06b-d6b9abf34537}.    KB973688 would not install either.  Tried rebooting, shutdown windows update, so I could install by hand.  No updates will be installed.  Help, please.

  This question always took place or simply with KB973688 and KB954430?
  Have you tried manually download and install updates?
  Have you read the known issues with this security update of the section of KB954430 and try the steps recommended?

  Suggest you download and Save KB954430 first . Since you did not specify if the system is 32 or 64 bit.
  If you are not sure which architecture is the system, open System in Control Panel.
  Look next to system type under law to see whose architecture is the system.

  KB954430 for Windows 7
  Windows 7 for 32-bit systems
  Windows 7 for x 64 systems

  Once the download is complete to read this and configure the system to boot .
  Start in what is called a State of cleanliness will ensure that Sophos and printing software (including HP print software) does not interfere with the installation of the update.
  Once you have started own the system, right-click the update registered and choose 'Run as administrator' .
  Accept guests UAC to allow the update to install.
  Reboot the system after installation.

  Is he being always reaffirmed or just KB973688 be already now?
  If KB973688 is the only be reaffirmed, install now while the system is still in the clean boot State.
  That bring them both installed?

  Cancel the clean boot procedure as set out in the KB article , they have or they do not have and please post back with your results.
  MowGreen Services consumer safety update

• updates for microsoft vista KB2431831 and KB971029 will not install I get an error code 646

  The Microsoft Vista download KB2431831 and KB971029 will not install, I tried manually install all I get is error code 646

  the KB includes an automated fix this that solves the problem, look here: http://support.microsoft.com/kb/2258121>

  Let me know if this helped.

• code KB9811433 646 and KB981715 does not install

  code KB9811433 646 and KB981715 does not install

  Sorry, you have problems getting your patches installed. I have a number of things for you to look at.  First of all, your Background Intelligent Transfer Services set to Automaticand started and Windows Update ? You can check these settings by typing services.msc in the search box of the start menu.

  Sometimes in order to get patches to install correctly, you must perform these tasks manually.

  (1) Download Center to visit Microsoft: http://www.microsoft.com/downloads/en/default.aspx.
  (2) search for each update code that begins with the letters "KB" and followed by a set of numbers (i.e. KB979309).
  3) click on the link for the download and then click on download and run.  You must accept the agreement and then click on continue.
  (4) repeat this process for each download of updates Windows could not install.
  (5) to rerun the update from Microsoft, click find updates.  If all goes well, it will show that you are completely patched.

  If this does not work, try to run the Microsoft OneCare safety scanner.  Sometimes it will solve problems of hidden registry, or erase viruses can prevent the installation of patches: http://onecare.live.com/site/en-us/center/whatsnew.htm. Click full service scan, and then Quick scan (full scan takes a long time to complete). Try the patches.

  Barbara

• KB973688 and KB954430 do not install it.

  KB973688 and KB954430 do not install it.  They appear to install, but after turning off and restart they keep trying to install again. I use XP SP3. (This is my 1st time to enter in ANY forum) Help, please.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft