LabVIEW allows you to sort the raw data of series
I have an FPGA that is programmed to dump all its bytes of memory containing the tensions, currents, temperature etc. when a serial is estabilished with LabVIEW.
I know how to connect in series, check all the bytes in the serial port and read the data to the serial port (using VISA).
What I have to do now is so through what is currently playing.
If it's reading the data in a sequence of 24 (16-bit) integers sent with the least significant bit first. I need to sort each integer and display in decimal form. How can I do this?
sout23 wrote:
How to actually extract each individual value. For example, the first value would be Vout second wine, etc and I want to display each value separately?
I would do something like that.
Tags: NI Software
Similar Questions
-
Downloaded Camera Raw plugin 9.1, but 13 elements still does not allow me to open the raw files from Nikon D750. Why?
Did you install that you downloaded?
-
XQuery and relational queries with the RAW data
So, I have a table like this setting:
I am trying a query which will regroup the different XMLTypes book_frag into one. If I use this query, it works, but it is slow and sometimes times out:CREATE TABLE book_frag ( book_id RAW(16), xpath_id INT, last_modified_ts TIMESTAMP, created_date TIMESTAMP, book_data XmlType, PRIMARY KEY(book_id, xpath_id), FOREIGN KEY (book_id) REFERENCES book(book_id), FOREIGN KEY (xpath_id) REFERENCES book_xpath(xpath_id) ); CREATE TABLE book_xpath ( xpath_id INT, book_element_name VARCHAR2(32), PRIMARY KEY(xpath_id) );
However, if I try this, it works at all.SELECT e.book_id, e.title_txt, e.subj_txt, e.target_mkt, e.target_lcl_mkt, e.catg, e.lang_code, e.out_of_stock_reas, e.sucsr_title, e.sucsr_sub_txt, e.orig_copy_ref, e.orig_subj_txt, XMLQuery( 'declare namespace invtdata="http://www.mrbook.com/InventoryData"; copy $invtData := $orig/invtdata:inventory modify ( for $bkRow in fn:collection("oradb:/BOOKSCHEMA/BOOK_FRAG") let $bk := $mpfRow/ROW/BOOK_DATA/node() where xs:string($bkRow/ROW/ID)=$bookId return insert node $bk into $invtData ) return $invtData' PASSING XmlType('<inventory xmlns="http://www.mrbook.com/InventoryData" />') AS "orig", CAST(e.book_id AS VARCHAR2(64)) AS "bookId" RETURNING CONTENT ) AS invt_data FROM entity e WHERE e.title_txt = 'Finite Variable Analysis' OR e.subj_txt = 'Finite Mathematics';
The error I get with this query is:SELECT e.book_id, e.title_txt, e.subj_txt, e.target_mkt, e.target_lcl_mkt, e.catg, e.lang_code, e.out_of_stock_reas, e.sucsr_title, e.sucsr_sub_txt, e.orig_copy_ref, e.orig_subj_txt, XMLQuery( 'declare namespace invtdata="http://www.mrbook.com/InventoryData"; copy $invtData := $orig/invtdata:inventory modify ( for $bkRow in fn:collection("oradb:/BOOKSCHEMA/BOOK_FRAG") let $bk := $mpfRow/ROW/BOOK_DATA/node() where $bkRow/ROW/ID=$bookId return insert node $bk into $invtData ) return $invtData' PASSING XmlType('<inventory xmlns="http://www.mrbook.com/InventoryData" />') AS "orig", e.id AS "bookId" RETURNING CONTENT ) AS invt_data FROM entity e WHERE e.title_txt = 'Finite Variable Analysis' OR e.subj_txt = 'Finite Mathematics';
Is it possible to leave the XQuery to use the RAW data type (16) without casting?ORA-00932: inconsistent datatypes: expected - got BINARY 00932. 00000 - "inconsistent datatypes: expected %s got %s" *Cause: *Action: Error at Line: 52 Column: 5
KnightOfBlueArmor wrote:
Is it possible to leave the XQuery to use the RAW data type (16) without casting?You are overloading the things, no need to XQuery Update in this case.
As far as I understand it, all you need is XMLAgg:SELECT e.book_id , e.title_txt , e.subj_txt , XMLElement("inventory" , XMLAttributes('http://www.mrbook.com/InventoryData' as "xmlns") , XMLAgg( b.book_data ) ) as inv_data FROM entity e LEFT OUTER JOIN book_frag b ON b.book_id = e.book_id WHERE e.title_txt = 'Finite Variable Analysis' OR e.subj_txt = 'Finite Mathematics' GROUP BY e.book_id , e.title_txt , e.subj_txt ;
(the OUTER JOIN may or may not be necessary, depending on the relationship between the two tables)
Published by: odie_63 on March 27, 2013 23:16
-
What happened to the button on the left end of the address bar which allow you to see the pages you had been so that you don't have to click the back button several times? You can look at the drop down window of pages and just choose whatever you want. I use it all the time and it is not on FF4. I want to go back to the old FF.
If you right click on your back button, or click and hold down the mouse button, it will display the list. (I prefer a click-right, because sometimes my fingers slide when I try to click and hold)
-
Qosimo F20: WLan adapter forget window allows you to configure the settings
I recently changed a linksys wireless router to bt home hub but white since doing so I have been informed of bt, the wireless network adapter (intel (R) PRO/Wireless 2200BG Network adapter)
I use keep forgetting window allows you to configure the settings. so every now and again I have to right-click on the icon in the lower right, choose View available wireless networks, click on change advanced configuration, and then click on the tab and then wireless networks check use windows to configure the box at the top left.
I'm very novice all help would be appreciated.
Post edited by: johnsmith3131
Hello John
As you know all configurations can be specific and depend on the used material. Believe me on this path it is not easy to say something concrete, because the BT home hub white is unknown to me and can I just suggest that you carefully read the user manuals which must be detailed explain how to connect external devices to the hub.
By the way: you have something like this http://digital-lifestyles.info/display_page.asp?section=distribution&id=3404?
-
Get the raw data to map its (SDK)
I did a search on sound cards and many forums have been useful. I have just a few quick questions.
I have a card his (CardDeluxe http://www.digitalaudio.com/) connected to the computer through a PCI. My goal is to get the raw data from the card and plug and it blow in analytics in CVI. I don't know how to "talk" to my sound card.
Of course, my main question is above, but to the refine some concerns...
I guess I need the SDK libraries for that. For this, I just need to install the MSN help libraries?
Is this possible in the Basic Version, or if the full Package of CVI is necessary?
I have not done things well at low altitude, but it looks like getting a wav file is necessary. I can't use anything outside of the applications I want to eventually create a program automatically record and play at a time (sync) précis.
Thanks in advance.
This site is what I was looking for. The zip file contains an exe as file c source code.
http://paulhoule.com/phsrec/index.php
Edit:
There is also some info here - http://forums.ni.com/t5/LabWindows-CVI/wav/m-p/235344
-
Why not wmc7, like vista allow you to browse the internet on your TV for xbox 360
original title: internet browser for xbox 360 using wmc7
Why not wmc7, like vista allow you to browse the internet on your TV. I have the Extender plug.
The Xbox 360 does not support Internet TV content. S.Sengupta Media Center MVP
-
What version of Adobe allows you to change the orientation of the page on some pages and save the document (PDF) with only a few of the tours pages?
Adobe is the name of the company, not the software as many people say. Since you want to know the exact software, it is important to know that.
Any version of Acrobat Standard or Acrobat Pro to do this. These are commercial software (a cool weather or subscription). The free Adobe Reader or Acrobat Reader cannot do this.
Tip: there are two ways to turn the pages; alone will save him.
-
View and save the raw data DAQ simultaneously
Hello
I'm new to LabView. I'm doing a VI that continuously displays in an indicator or a gauge the value of an analog channel to a data acquisition, while at the request of the user, saving some values of this signal on a table.
I can do each of the things separately:
-display of real-time in an indicator or a gross DAQ analog gauge
-save some points of the raw analog signal DAQ
but when I try to do the two I'm not sure of the place where put assistant DAQ so it samples when it should.
The attached VI does not work properly, but you can see the 2 things I'd like to have working in parallel.Any help is greatly appreciated.
Thank you much in advance.
Hello Gabriel_Torre
You can use queues is a simple way to divide the part of acquisition from the analysis or display the part. It's the same as in the examples of producer consumer of LabVIEW.
I also recommend setting the samples/rate of factor 1/10 if the loop runs with 100ms not only every second. Now all work with time of 100ms iteration loops with this architecture.
It will be useful.
-
Fluke Hydra 2625 with NI LabVIEW drivers: can not read the output data
I work with a Fluke Hydra data logger 2625 have downloaded the drivers from NI LabVIEW, crossed the config., initialize and modes files and now trying to read data from a thermocouple.
Initially, I was getting an error message ("17" I think) but now, after correcting the port numbers, the recorder data and LabVIEW seem to communicate without error. I would like to know where I should look (in the panels before different drivers) for temperature data output.
Any advice would be appreciated at this point. Thank you.
There is a driver not supported here. I have the instrument and you have not used one in quite a few years, but if using the example, the function can be set to temperature temperature with the 751 RTD or thermocouple. The results indicators min/max/last.
The pilot could really benefit from a full rewrite, but it seems that most of the basic functions are there.
-
I accidentally deleted a volume under disk management and I have them reassigned back but without the drive format
so now, the drive that displays raw
I wanted to recover the data within which are about 250 GB of photos
no idea how can we recover all the data?
Hello Mamimo,
Thanks for posting your query in Microsoft Community Forum.
Drive hard RAW or unallocated is one that does not contain a recognized partition and so do not appear as a drive letter on your computer. This is usually because your existing partition got corrupted and is no longer recognized by the operating system.
Common causes for this are malicious virus or a system crash.
Refers to the RAW "not having undergone processes of preparation, dressing, finishing, refining or manufacture", which describes how the hard drive was once sent from the factory, without partition. RAW and unallocated are terms used in the Windows disk management (click right on my computer > Manage > disk management) to describe the State of the reader.
You can use third party software to recover the data by using your favorite search engine.
Important: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.
Thank you.
-
iMovie 10.1.2 falls down during editing of a film, usually by doing something like adding a title or a transition. Failed attempts to restart. Try to reboot with the option key + command allow you to remove preferences. Then either receive an error indicating that the graphics card is incompatible or the application block requiring a force quite. Restart or stop the iMac translates the suspended system requiring a manual stop holding down the Start button. Restart in Safe Mode and then the normal startup will allow iMovie to load. But after a few minutes of work with the program, it crashes and scenario again. I use El Capitan 10.5.11 on an iMac of 2013. I deleted the iMovie app and reloaded it, no change. Someone has an idea for a fix?
What are the specifications of your clips you want to change? Try to create a new user and see if FCPX is behaving.
-
How to force the Photos up-to-date original jpeg file after you have added the GPS data and rotation
Hello
Pictures has the ability to add GPS data to an image file, but stores the GPS data in a catalog instead of the actual image file. The same seems to apply to the rotation of the image. Is there a way to force the Photos up-to-date the actual image file?
The only solution I have found so far is to export images updated, remove them from the library of Photos and re - import. This process, however, replaces the original creation date with the date of the export in the file. (i.e. a photo taken in 2007 with a creation date of 2007 will now have the date it has been exported photos as a creation date.)
The reason why I want to update the original file, it is that I use Google Photos automatically create albums using the content of the image, the GPS data and dates. The backup utility Google downloads the file Master Original therefore excludes files and changes to images in the photos.
I use the photo Version 1.5 (370.42.0)
Thank you.
The same seems to apply to the rotation of the image. Is there a way to force the Photos up-to-date the actual image file?
No, Photos will never alter the original image file.
You can export the photo with the GPS and reimport with file > export and activate "include location information:
Or use a tool to add location data before importing photos to Photos. I use Jetphoto Studio.
-
LabVIEW prompts you to save the vi during the closing of the reference
In our application, we - open reference vi - find its executing state - the closing vi reference. In closing, LV prompts you to save the vi, how to avoid it. I can see option to activate the guest of LV, but no option to skip. 0x20 for now allows us to avoid the load dialog box.
We appreciate your comments
Thank you
SAS
Looks like when leaving the possibility to 0x0 or using any other option other than 0 x 4, should not prompt the user to save the file. But for some reason, I met the guests user to save the file... Don't know why! but I got the solution now :-)
It will be good to know why I got the guests even for option 0 x 20!
Thank you
SAS
-
Is there a pan &; zoom plugins that allow you to adjust the result
I just use Pinnacle Studio, which allowed more latitude to the Pan and zoom by not limiting the zoom to the lengthening of the time line.
I realize that first pro does not allow this. Y at - it a plug-in that can give you more options. Y at - it another free software that can be used as a workaround to make pan and zoom of segment
None that I know.
But I guess you could create your pan/zoom in the Pinnacle software and output as a MP4 of 1920 x 1080 and then import this video in Premiere Elements to work around the problem.
Maybe you are looking for
-
Reinstall Mac OS with bluetooth keyboard
Can I reinstall MacOS on Imac 27 even if I only got a bluetooth keyboard?
-
Satellite Pro A40: How do I know if it is wireless?
iI just had to reinstall all the software and hardware on a satellite pro A40 friends two or three years.I think, how whether it is wireless and which modem it is and how to access internet about this big question, looking for a big response. Thank y
-
Satellite L50 - B turn off without reason
My toshiba laptop Satellite L50 - B keeps cutting without reason after for a couple of hours sometimes only 10 minutes however.He does everything at stake but also while watching movies and all other applications are closed OS: Windows 7 (64-bit)
-
Invisible logical partitions after deleting partition EISA WinRE on satellite
Hello I have a dual boot with pre-installed Vista and XP. So, I got in total 3 primary partitions and 1 scope with logical partitions it contains. I keep Vista on the reserve and only use XP as a boot partition. I wanted to try a third OS but I had r
-
How to fix iPhone stuck on headset mode 5s
I started to use my headphones for a few hours then I have them finally released and I have no sound! I have sound when I plugged headphones! Help, please!