LabVIEW crashes when opening the project

Similar Questions

• LabVIEW crashes when loading a project programmatically

  Hi guys,.

  I write a VI that loads by program a major project and then programmatically perform some tasks of generation. It is to set up my server to auto (apparently a VM) builds. I got some success with it, however, it is not stable at all.

  I find that when he failed, he was always with labview froze at loading of the project, not when VI starts loading. 90% of the time it froze at loading a few HIO I have no knowledge on the files and they are all EITHER word password protected live they can be found at:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2011\resource\Framework\Providers\lveio\public\EIOResourceTree_Provider_Get [XXXXX] where [XXXXX] varies, some examples are:

  EIOResourceTree_Provider_GetRequiredBooleanProperty

  EIOResourceTree_Provider_GetRequiredFilePathProperty

  EIOResourceTree_Provider_GetRequiredI32Property

  Sometims it could freeze at loading the files in C:\Program Files (x 86) \National Instruments\LabVIEW 2011\vi.lib\eio\errors

  As soon as he finishes to load these files, it would be a good race without any problems. But now I get only managed to all attempts at 8 or 9, which is totally unbearable.

  Another note, if I run LabView.exe manually, then load the project, it will never fail. This freezing problem happens when the project has been programmatically lanuched.

  Any idea is appreciated.

  Here is a solution I found earlier but forgot to update here:

  -L' trick is to add a little delay (about 3 seconds) at the beginning of the VI of highest level. in my case, I added a delay of 5 seconds before the first basic Path.vi call. See ss below.

  

  I guess that the cause is the result that LabVIEW has some race conditions or mishandling of the sequence during its initialization process.

• Photoshop CS5.1 demo Crash when opening the file

  I just downloaded last night. I went to try out it this morning, but it crashes when I try to open a file. I so can not open the software back until I get into the task manager and end photoshop processes running in the background. I'm running on Windows Vista.

  Well Yes you're crashing into your NVidia video card driver.

  Please update the driver for NVidia to (non-Microsoft) web site.

  And the process is the gel after losing because Microsoft "search for solution" has not finished, but for some unknown reason.

• Still crashes when opening old projects

  Is this a problem with still.  I use CS5 and I'm opening a project, I probably created on CS1 or 2.  Whenever I try to open it, it crashes.

  Based on (mostly) reading about similar problems in the forums first, I would say it is a problem of version control for the first and still

  The 'essential' from what I have read, is that someone can open "usually" a version of a project file, and SOMETIMES a version two return folder, nothing more that does not go to project work

• GarageBand crash when opening the editor/noon

  Hello world

  I recently installed "Impact_Apple_Integration_OSX_1.0.5" on my Macbook Pro (mid-2012, El Capitan) to use the Nectar LX49 with Garageband.

  Since installing my Garageband hangs every time I try to change a midi file or try to open the editor.

  The error says:

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0 x 0000000000000030

  Note the exception: EXC_CORPSE_NOTIFY

  What can I do to fix this?

  Thank you

  Jakob Tollerian

  Hey Jakob

  I'm having this problem too and I'm investigating it. Can you post the full error report log?

  Thank you

  Pascal

• crash when opening the recovered files

  Whenever I run the application Photoshop CC, it tries to open a recovered. PSD file, then I miserably to block the software.  What can I do to prevent this [maybe corrupt] automatic opening at startup?

  Hello

  You must go to this place and drag and drop the ASR. PSD file to the desktop and then launch Photoshop:

  Location of Mac: ~/Library/Application Support/Adobe/Adobe Photoshop CC/recovery automatic

  To access the library user on mac: open Finder > click on Go > go to folder > and type the entire command

  Location of Windows: C:\Users\username\AppData\Roaming\Adobe\Adobe Photoshop CC\AutoRecover

  To access the Appdata: open the window run (Windows key + R on the keyboard) and type %appdata%\protector.exe

  This will prevent the automatic opening of the recovery. PSD file and will launch Photoshop normally.

  Kind regards

  Claes

• Need help with question - PS Photoshop crashing when opening the file.

  I downloaded creative cloud and installed Photoshop for free trail when I opened and you click new file, I get an error saying "Photoshop cc 2015.5 has stopped working" how to fix this?

  Look at this thread here: Photoshop CC 2015.5 crashes after launch - Win8.1

  There are a few things that you can do it yourself, but if no luck in Monday customer contact and let watch them.

  If you not clearly understand what to do, then wait and Contact customer

  There is no interest to make it worse.

• Reader crashes when opening the pdf while UAC elevation

  Hello

  I'm a developer who has a package installer for our software which, of course, requires UAC elevation to perform the installation.

  On the last screen of the installer, we try to give the user the possibility to open a .pdf of our user manual.  Any other than .pdf format works very well, but Adobe Reader will not open, and once this has happened, Adobe Reader does not work at all until the user opens a session and return to.

  Comments of the vendor of the package install (Setup factory):

  > >On Windows 8 and 8.1, Adobe Reader does not start correctly when it is called from the high count (after UAC has been shown and has been granted access). If you perform the same script from a facility that has been manifested to run "as applicant", you will see the PDF document opens correctly, which suggests that there is some kind of problem with the Adobe sandbox. If another application PDF, such as Foxit or SumatraPDF, is installed on the target computer and saved for the manipulation of PDF documents, you will see that the file opens correctly, even when the viewer of documents is launched, after the elevation of the user took.

  This seems to be a bug in Adobe Reader?  Or am I missing something?

  Scott

  Eve software postage

  I'm not saying that it was designed to work that way, or that everything is fine. But it can be good for you (and me) to review, it's a good idea to run Adobe Reader unnecessarily high. Similar considerations apply to the choice that many installers are doing "run applications now?" at the end.

  (Security scenario: lock PC.) Admin comes to install your software, between the password for UAC. Installation in competition, starts. The user now has a copy of Adobe Reader, where they can record in tight areas, perhaps compromising safety).

  (Privileges Scenaro: elevation software creates a file of preferences, as an administrator.) Later runs, not high, can not overwrite the preferences file, leaving the user to have preferences).

  (System scenario: I read that communication with the shell does not work for a higher app and shell not higher.) No further details).

• Windows media Center crashes when opening the music library

  Hello

  My Windows media Center crashes in windows7 whenever I click on the music library option, all other options as 'favorite game' works very well. I have to Ctrl + Alt + Del to close media center every time it freezes. Any suggestions someone please

  Hello

  Did you change your computer?

  I suggest you to follow the methods and check.

  Method 1:

  I suggest you to follow the steps and check.

  a. exit any running instance of Windows Media Center.
  b. Click Start and enter the following command in the search start and press on enter:
  %SystemDrive%\programdata\microsoft\ehome
  d. in the details, click pane right mediacenterdatastore.db and then click on remove.
  e. click Yes to confirm that you want to move the Mediacenterdatastore.db file to the trash.

  If the above fails, then I suggest lets you perform the cleanup start and check.

  Method 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• RTE de LV cannot open the project files that include references .lvlib in dependencies

  I am writing a DLL LabVIEW to inspect the LabVIEW project files, and I noticed that if a project has a .lvlib reference in its dependencies, then the Run-Time Engine is contradictory on whether or not he can find the project file:

  • Project.Open returns error 7 (file not found)
  
  
  • Project.GetFileLVVersion is a success

  Here are some excerpts from my code of G and C engaged in this behavior:

  

     int openStatus = StatusSuccess;
  
     char * projectVersion = createStringWithLength (VersionStringLength);
  
  printf ("Analysis %s\n", pathchaine);
  
     OpenProject (pathchaine & openStatus, projectVersion, VersionStringLength);
  
     printf ("  project written in LabVIEW %s\n", projectVersion);
  If (openStatus is StatusSuccess)
  
     {
  
        printf ("  Open the project file.") \n") ;
  
     }
  
     on the other
  
     {
  
        printf("Error: could not find Project file, or file was not a Project file (Error code %i).\n», openStatus);")
  
     }

  However, when running in the development environment, the two methods are successful.

  Is this a bug, and if so, is it fixed in 2014 of LabVIEW?

  Here's how you can reproduce:

  Prerequisites:

  1. LabVIEW 2013 SP1 32-bit
  
  
  2. ConEmu for a good console- https://code.google.com/p/conemu-maximus5/wiki/Downloads
  
  
  3. minGW for compilation of a program to use the LabVIEW - http://sourceforge.net/projects/mingw/files DLL

  reference .lvlib to break dependencies Project.Open in LV RTE

  1. Open the attachment in a temporary directory (e.g. c:\xtra\temp)
  
  
  2. Open "OpenProject.lvproj" in LabVIEW.
  
  
  3. Build 'Open library project'.
  
  
  4. ConEmu with a bash command prompt, navigate to the temporary directory.
  
  
  5. Type make
  
  

  $ make
  
  patch the file "builds/platdefines.h.
  
  GCC - std = c99 g OpenProject.c o OpenProject.exe - lOpenProject - Lbuilds

  
  

  6. type "c:\xtra\temp\OpenProject.lvproj" OpenProject

  OpenProject $ 'c:\xtra\temp\OpenProject.lvproj '.
  
  Analysis c:\xtra\temp\OpenProject.lvproj
  
    Project written in LabVIEW 13.0
  
    Open the project file.

  
  

  7. the opinion that both call nodes execute correctly.

  8. type "c:\xtra\temp\OpenProjectWithLvlibDep.lvproj" OpenProject

  OpenProject $ 'c:\xtra\temp\OpenProjectWithLvlibDep.lvproj '.
  
  Analysis c:\xtra\temp\OpenProjectWithLvlibDep.lvproj
  
    Project written in LabVIEW 13.0
  
  Error: Could not find the project file or file was not a project file (error code 7).

  
  

  9. notice that the node version managed while the open failure.

  10 type diff OpenProject.lvproj OpenProjectWithLvlibDep.lvproj

  $ diff-u OpenProject.lvproj OpenProjectWithLvlibDep.lvproj
  
  -OpenProject.lvproj  kills Nov  4 11:28:28 2014
  
  +++ OpenProjectWithLvlibDep.lvproj      kills Nov  4 11:32:37 2014
  
  @@-13,7 + 13.11 @.
  
         true
  
         fake
  
         
  
  -      
  
  +      
  
  +          
  
  +              
  
  +          
  
  +      
  
         
  
            
  
               true

  Here's another way to trigger this behavior, which shows that LabVIEW occasionally Range the element dependencies:

  1. Open "OpenProject.lvproj" in LabVIEW.
  
  
• Add to the project a new VI and place the constant path of file "Application Directory" his block diagram.


• Select ""leader "Save All (this project)" and use the default name for the new VI.


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Notice that there is a mistake once again, as is expected.


• Remove the "Application Directory" path of file constant


• Select ""leader "Save All (this project)"


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Note that the problem has disappeared, as is expected.


• Add the "Application Directory" path of file constant in the block diagram.


• Select ""leader "Save All (this project)"


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Notice there is no problem, which is surprising, because that there should be a mistake because the dependencies item was not tidy.


• Close the new VI and pull out of the project.


• Select ""leader "Save All (this project)"


• Open "OpenProject.lvproj" in a text editor.


• Note that the dependencies item was put away.


• Add VI back to the project.


• Select ""leader "Save All (this project)"


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Notice that there is a mistake once again, as is expected.

NInjaneer_wow wrote:

The same behavior occurs in LabVIEW RTE: a new project with a constant of the Application in an empty vi directory will return an error 7 - file not found, but still return the correct version of LabVIEW in which the project was created.

I did experiment with workarounds for this problem, and I found a.

When I used to get the path of LabVIEW libdir in the ini of the executable file, execution is able to load and inspect the project file.

LIBDIR = 'C:\Program NIUninstaller Instruments\LabVIEW 2013'

While it is expected that a stand-alone executable can be placed on a system that does not have the LabVIEW IDE, it is still surprising to me that the execution engine cannot find standard library of LabVIEW without some explicit guidance. What other factors contribute to this behavior?

References:

• Configuration of LabVIEW files and paths- http://labviewwiki.org/LabVIEW_configuration_file/Paths

• iMovie on El Capitan 10.11.2 crashes when opening, indicating the download of a project.

  iMovie on El Capitan 10.11.2 crashes when opening, indicating the download of a project. You have to force quit.

  It is possible that you have a corrupted project which will cause iMovie hang when it tries to load it.

  Hold down the Alt (option) key when you launch iMovie.  This will prevent that he tries to load all projects immediately and ask for a library to open it.

  Geoff.

• LabVIEW crashes when programmatically getting the dependencies of a major project

  Hi all

  I'm working on a LV application where a project must be created programmatically & its dependencies must be analyzed. But when I add a source folder containing many files (> 1000) LV crashes when obtaining the mention of dependencies (in the method highlighted in the image below). Is there a work around for this problem? Also finally I have to compile this whole code of packaged project library. It requires extra coding?

  

  Thank you
  George S

  Did save you the new project before trying to read the dependencies?

  Mike...

• Premiere Pro CC - Crash when opening because of the network disk cache

  I had the first fail to open for some time now on one of my secondary PC. This computer has been configured with a network drive as its disk cache and links to projects.

  It's as well as several editors can work outside the same RAID. Works perfectly, except for the fact that irreversible windows somehow the network drive. Once that has happened the first does not start and crashes when starting the program.

  I got the network bound upward at some point drive and first launched again running with zero problems. Yet once foires windows, the network drive and the first does not work.

  I need to reset the parameters of creation (disk cache settings).

  THINGS I'VE TRIED:

  I've tried holding Ctrl + Shift to reset, did not work.

  I already tried uninstalling and reinstalling, but settings are not withdrawn and the program crashes.

  I would just connect the network drive and then once the first spear change the disk cache and never do this again, but unfortunately the computer will not repeat on this disc partical.

  Let me know if you need more details,

  I am running windows 8, latest version of CC (just updated). I have 32gig of Ram, I7 overclocked at 4.4 GHz, Nvidia Graphics processor.

  Thank you very much

  Hey there!

  Well now your post is over a year old, but recently, I had the same problem.

  The solution was what you thought: redirect the path. But where? I searched the registry and there you have it:

  Cache 8.0\Media Computer\HKEY_CURRENT_USER\Software\Adobe\Common

  There is a key named FolderPath. Set it on a drive local and first should do it again.

  BTW adobe: this is really a bad bad bug or bad conduct. If something doesn't work not software should ask another solution instead of just diet...

• Error message when you try to open the project in Captivate 9

  Hello

  I have a huge problem with one of my projects. It was working fine and that it was completing something happened. One of my coworkers opened to check the faults of grammar of last minute, and when she tried to save him and it took him a long time she decided to close it. which resulted in the error "not responding" and the screen is empty. After this incident, non of us can open the project. When I try to load it goes to 10%, and gives me this message.

  Needless to say that this is the only copy and I really don't want to repeat the same project from scratch. Could you guys please help? Any suggestion is appreciated!

  Can you check if it's "locked" files on a system?

  You do not check the backup option in the preferences? It's always the first thing to do when you install or patch Captivate.

  The cache folder may be a secondary cache if you can identify it, you compress the folder corresponding to the date that you have finally opened the project.  Do not clear the cache at the moment.

• When I opened my project and it is unable to locate the files. I find the files that are 'missing' and open the project.

  Hi im quite new for first pro and I'm having a problem when I opened my project and it is unable to locate the files. I find the files that are 'missing' and open the project. Everytime I open the project everything I see is all that media have these red, pink, blue, green, yellow lines, where pictures should be. And there is also the title of my pictures in the upper left corner. No one knows what it is and how I could fix this?

  [title published by mod]

  [Please do not double post, deleted the other]

  Right-click on the images in the project window: recharge or replace it.