LabVIEW data - memory usage

Similar Questions

• VI memory usage: very large data

  I'm working on the restructuring of an old project using structures that are more up-to-date. The old code used parallel loops to check if the values of the controls have been changed. My new code instead uses the event structures. Glancing on both memory usage statistics, I have reduced slightly before Panel and block diagram object memory, but I have more than 10 MB more 'Data' in the new code. I checked all my paintings and others, none of which is too large. Any ideas on what is using all this memory? Thank you!

  It is using new code from memory.

  

  And it's the former.

  

  Unfortunately, the code is too big to fix.

  How about a control or an indicator that has a large amount of data stored as default?  Who will eat the memory even if the indicator/control displays all these data at the moment.

  Close your VI and reopen it.  See if any of them contain data that you do not wait.  The data can appear even larger because the controls now contains data that is the display as well as the data that is stored by default as one of its properties.

• withdraw the authorization allowing you to monitor the memory usage

  I now often have either force quit, restart and started having panic 'of the core"since I agree allow Firefox CPU usage monitor. I'm still on OS X 10.6.8 on my Mac. I got no problem with anything since installing this OS X.

  However, from time to time with the latest Firefox 7.0.1 installation I think the program or my computer 'blocks' and seems unresponsive. I left active Firefox and resident on my computer last night and once again, everything will be inadmissible. I opened the monitor activity and noticed that Firefox was consuming 283 MB of real memory (now 298,6 MB) and I have this one open another tab for the Seattle Times. I withdraw my permission to allow Firefox to watch my memory usage and need to know how to delete the cookie or what ever that governs)

  Go to Firefox > Preferences > advanced > general tab and uncheck the box "send performance data" more information here.

• RT in LV 2012 Get memory usage

  Hello

  the VI 'Memory get RT Usage.vi' apparently is no longer available in LabView RT 2012. The help says to go to ni.com/info/f/ and enter a Code Info but this code leads nowhere. My question is now how to replace this VI with a pice LV 2012 in compliance of the code?

  Thanks for the help,

  Christoph

  The memory usage to RT has now been replaced by the function contained in the API of the System Configuration.  You can find the replacement feature in accessing public services RT > System Configuration > software RT > node system.  Drop this node in your code, click on it and go to the system resources.  There you should be able to find all the functions that were previously in the memory usage to RT vi.

• QNetworkAccessManager limiting the memory usage when no head

  I have a long application works without head that downloads files from 6 MB upwards on a web server. Now using QNetworkAccessManager to view the file, I see the memory usage, pull up and soon to exceed the limit of 3 MB.

  The QNetworkAccessManager then suffers bad allocations and crashes.

  I was hoping would be sort of the QNetworkAccessManager chunk the data of the file on the disk and keep low memory footprint, but it seems he is trying to remove all of the file.

  All means to limit or control the behavior of the QNetworkAccessManager?

  See you soon

  Paul.

  Hello.

  We started an internal investigation to verify the QNetworkAccessManager implementation.  A suggestion to try next was to try using libcurl to perform the download of files.

• Too high on linux VM memory usage

  We have a linux virtual machine that uses so the amount of memory.  It helps to be on a physical server with only a gig of memory, now it's on a virtual machine with 1.5 GB of memory and it is often the sending of alerts that the memory usage is of the order of 90 to 98%.  Maybe something was wrong when we converted to a physical process to a virtual machine?  It runs only Apache 2.0 so I don't think I need to increase the memory.  Everything that I can check, or perhaps something that should be done after the conversion of a physical to virtual machine?

  • Make sure you have installed and after installation script executed vmtools

  • know what process consumes all this memory, you can get this data by using the ps command
    PS - eo mmtp, rss, vsize, args pcpu | Sort - k 1-r

  ---

  MCSA + S, VCP 3, 4 VCP, vExpert

  http://wirtualizacja.WordPress.com

• The SQL Developer memory usage is very high + session monitor work not

  Hello
  I'm facing 2 problems with SQL developer tool.
  
  (1) high memory usage (about 160 MB).
  (2) when I click on tools-> monitor sessions, session related window opens upward.
  
  I use 1.5.4 version. Please let me know if there are fixes for these issues.
  
  
  Thanks

  Hello

  (1) not much help for you, but for me, 160 MB is not excessive use of memory for SQL Developer (mine is currently sitting at around 150 MB). And then, I have been using the tool for a while and have a lot of memory on my computer.
  (2) tools > Sessions of the monitor works fine for me (DB 10.2.0.3). Do you get an error message when it "does not open upward? Which version of DB are you using? If you go through the browser reports (see > reports if it is not already displayed) and select Data Dictionary reports > Database Administration > Sessions > Sessions, does it report?

  theFurryOne

• Memory usage of Firefox flies away and crashes despite Reset etc.

  I use Windows Vista and recently, after he tried to update Java and Adobe plugins for Firefox browser last shot every time I use Firefox any open what really but especially if a video is open the memory usage keeps climbing and does not stop. Firefox crashes almost everytime. I tried the Reset, I tried to turn off and so on several plugins and others, and nothing has changed, but that the memory usage can climb higher and avoid crashing anymore. The fundamental problem of the memory usage crazy not stopped nor slowed down.

  It starts at an average use 200 k to 300 k, which was normal, except if he had run for hours or playback of videos for hours could go up to 800 k. For now, thirty minute walk with no video and four tabs is 1 300, 000 k. I don't know what does. I'll try to uninstall adobe and then use an earlier version but I have done so many things at this point, I'm curious to know who else has this problem. I have not tested the safemode, but despite everything I need a lot of these add-ons to what I use my browser for. I do not understand why the use of memory keeps climbing even when I do nothing. I run a system scan for virus etc, nothing. I know that I have an older video, its pilots updated card and I tried to turn on the option acceleration on and out also. Why Firefox would continue eating memory?

  The crash of the reports I receive look like this:
  BP-7cf4e751-66dB-49fc-8a05-083132130814
  BP-b680d967-eee5-44a7-a5e0-c1f422130814
  BP-5b457653-8B58-4ee0-80cc-32fe82130814
  BP-304b8b40-d4e5-4F36-AF10-de58e2130814

  Thanks to anyone who can help!

  Three of the four crash reports indicate a correlation with the Ghostery extension. The precise cause seems to be indeterminate. Can you make an exception for the video sites and see that allows, or try turning it off for 24 hours?

• Extremely high after upgrade to Firefox 12 memory usage

  After I've upgraded to Firefox 12, I started frequently affected by hot air balloon Firefox memory usage extremely high (2-3 GB after a few minutes of navigation) light. Sometimes it will fall back down to a more reasonable level (a few hundreds of MB), sometimes it crashes (probably trying to garbage collect everything), and sometimes it crashes. Usually the thread crash cannot be determined, but when it's possible, it's in the garbage collection code ( https://crash-stats.mozilla.com/repor.../list?signature=js%3A%3Agc%3A%3AMarkChildren%28JSTracer * %2 js C + % 3A % 3Atypes % 3A % 3ATypeObject * 29% ).

  I managed to capture a subject: report memory when Firefox had about 1.5 GB and have attached an image.

  A couple of things I've tried. I have a lot of tabs open (although don't load it the tabs until the selected option is enabled), so I copied my profile, all kept my extensions enabled, but all my tabs closed. I then left an open page http://news.google.com/ and it worked very well for several days, while my original profile goes down several times a day.

  I also tried to disable most of my extensions, leaving the following extensions that I refuse to sail without:

  Adblock more
  BetterPrivacy
  NoScript
  PasswordMaker
  Views
  Priv3

  However, the problem still happens in this case.

  Don't know if this helps or not. I'm looking forward to trying Firefox 13 when it comes out.

  Never knew what was causing the problem, but have disappeared since the upgrade to Firefox 13, accidents and memory pathological use.

• Firefox uses a huge amount of memory on my computer. I continue to receive alerts from high memory usage. Can I do to solve this problem?

  Firefox uses a huge amount of memory on my computer. I continue to receive alerts from high memory usage. Can I do to solve this problem?

  300-400 MB is not huge.

  How much RAM do you have?
  
  How AVG reports that Firefox uses?

• Message tells me that the memory usage has been 75%

  Hello

  I get (once a week) a message Bublé Tosh saying my memory usage average during the last 7 days was 75%.
  Should I be worried?

  I have 1014 MB and I don't exactly tell me a power user!

  Thanks for any help.

  Nick

  Don t think that there could be a problem is only a windows Vista notification message that informs you about the State of laptops OS.

• How to check the memory usage of cash L2?

  How can I check if my processor uses cash L2 memory?
  How to activate it?
  How to know how much it is?
  My laptop is satellite MX30-113.

  Hello

  Unfortunately I can't tell you much, but I found an interesting tool for editing memory. He called the Elcor V3.3. If you wish, you can see all the features of the tool. Maybe it will give you more information on the memory usage.

• Memory usage

  We have a few GSM7228 and 5300 network (successful) on LAN switches. All switches has 90% or more of average use memory permanently.

  The network works fine, but we are curious to know the high memory usage. Average CPU usage is less than 10%, response time is great & packet loss is 0%.

  Any idea what could cause high memory usage? Thank you.

  Thanks for the reply. The version of the installed firmware is 10.0.0.53.

• Y50-70 display blinking rate increases exponentially on 40% memory usage

  I upgraded my new laptop of lenovo Y50-70 to win 10 about 1 month ago. Since that time I noticed that my screen would now and then Flash. I looked for a solution and I had a lenovo... Web site deactivation of 2applications in the Manager of tasks in safe mode. He helped abit because the flicker rate slowed, but it never disappeared.

  I investigated the system of som time now and I have found that when the memory usage goes up to about 40% flickering display rate increases exponentially. I have 8G of RAM, GTX 960 2 GB graphics card so I don't expect a problem when running my usually of programs. I won't even do games even if I know that the machine can handle but I guess it would be much worse if I tried.

  Please give me a permanent solution.

  Note from the admin; type of system added to the subject line

  I can't say for sure, but did you ask al updates to the Lenovo Web site for your system?

  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/Lenovo-y-series-laptops/Y50-70-Noteboo...

  You can download and apply all updates Win 10, including the latest version of the BIOS.

• measure the angular speed, angle and trigger using a gyroscopic sensor breakout board and LabView data acquisition

  How to measure the angular velocity, the angle and trigger using a gyroscopic sensor breakout board and LabView data acquisition?

  There is a single channel data acquisition code which measures the angular velocity, angle and flexibility using a gyroscopic sensor breakout board and acquisition of LabView data attached to this, I need a help to creat two-channel data acquisition code?

  Hello

  Attached is a vi that you can use in order to read the measured angular position of an encoder.

  If you need more examples on the tasks that you can develop with NOR-DAQmx and LabVIEW, you just need to open LabVIEW and click Help > find examples > Input and Output material > DAQmx > entry counter.

  Kind regards