LabVIEW event to re-establish control not recognize.

Similar Questions

• LabView does not recognize my NXT.

  LabView does not recognize my NXT. The small orange window in the lower part
  left corner shows "NXT target not specified." I powered down and back up
  (block the NXT and computer) again after connecting my USB at NXT. The computer is the little jingle when I connect or disconnect both ends of the USB cable.  I have
  tried scanning via Tools/NXT terminal. Pushing scan causes simply one
  image quick to appear and disappear; no 'name', 'connection type' or 'State' appears. They are empty. The help section says that it is 'straightforwrd' and it makes me feel
  LabView will automatically recognize the NXT block that is connected, but this isn't the case. Is there a standard procedure to ensure
  connection-aware in the NXT block by the LabVIEW program? How can I 'specify' my 'target' as it says in the small orange window? (My
  laptop using XP and I tend to use Mozilla firefox...) Thank you!

  Measurement and Automation Explorer (MAX) is another software that we provide. You should have on your computer since you have LabVIEW. If you who open and expand my network, and then expand devices and interfaces, a device USB shows in there? If not, then MAX does not recognize the device, and if this is the case you will not be able to use the device in LabVIEW. If the device is not recognized, make sure that you have the module and the driver for this product.

  Once the unit displays in MAX, you will be able to use in LabVIEW. The module is located here.

  David has.

• LabVIEW does not recognize the comma

  Hello to everyone,

  As you can see on the object, I have a problem due to the fact that Lb does not recognize the comma.

  In practice, I tried to open a VI created by me in a laptop of my colleague and I found that his (2012 version) Lb program does not allow me to plot the data, saved to a text file, in which the decimal separator is a comma.

  Later, I found that this happens because its Lb program does not recognize the comma; for example, it is impossible to insert a Costante DBL with the comma as decimal separator. When I write "it's impossible" I mean physically, that's when I press comma on my keyboard, nothing happens.

  At the same time, when I try to use the Sub - VI 'chain fract/exp to the number', if the input string is equal to 1, 2 (for example), it returns 1, even if 'use decimal system' is true.

  Someone at - it the same problem?

  Thank you!

  Hi Bob,

  I solved the problem by simply changing the decimal by default on the computer. It was established for the period.

  Thank you all for the help!

  Best regards.

• HP Officejet 4622 will not print simple controls because it does not recognize the paper size.

  Product: HP deskjet 4622 All In One

  operating system: Windows 7

  Software used: Quicken Starter Edition 2011

  My printer refuses a single cheque due to the size of the paper being not recognized by the printer. The actual size of the individual audit is 8 1/2 inch wide and 5 1/4 inch from top. There is no size in the settings of the default paper size that matches the paper size... The quicken software print 1, 2 or 3 controls on a sheet so if I print 2 verifies that leavesme with a single cheque that is wasted because my printer does not recognize the size. My previous HP printer did not have this problem.

  Someone at - it suggestions?

  xgdude, unfortunately this printer does not support true custom paper sizes, he acknowledged instead the paper types that are commonly used in the United States. This is because the non-traditional types of paper are difficult for the printer to recognize and inside the right margin of the printing error.

  I hope this information is useful!

• analysis of the chain does not recognize the AM/PM indicator

  Hello

  I'm using Labview 8.6. I want to parse a time string, with an AM/PM indicator on the inside, but the format of time code 'string scan. '

  "%<%d/%m/%Y % I: % h: %p %s > T ' does not recognize the AM/PM indicator. The other strings contains the AM/PM indicator.

  Best regards,

  Friedrich Vollink.

  Is the solution:

  define the symbols AM and PM in the control linguistiques\Options settings\time Pffffffffffffffffffffffffffff

  regards,

  Friedrich Völlink

• Firefox for Mac does not recognize a valid SSL certificate

  Firefox for Mac does not recognize the SSL certificate that is valid for this site, I got: https://www.georgeglazer.com. It gives a warning "not reliable." However, the Firefox for Windows does not give a warning. This happens even if I clear the cache and it happens in the Mavericks and OS of Yosemite. The certificate is up-to-date and with Comodo. Firefox for Mac is now the only browser producing these errors (v. 39, put updated) - Internet Explorer, Safari and Chrome are not. Our hosting provider has said it's probably a browser issue, perhaps having to do with intermediate certificates in Firefox being obsolete. I really hope you'll solve the problem, as it's annoying for us when we're going to do right by our customers and pay for the SSL certificate. I have attached a picture of the warning and the other from what you see on a PC: a pop-up that says it is a verified SSL certificate and gives details about the issuer, the period of validity, etc.

  COMODO should you sent a link to download the file 'bundle' containing the intermediate certificates. Who needs to go in the same directory as the certificate of your site. If you are using a control panel, your host can probably help with this process. And if you bought through them, shame on them for not taking care of this for you already!

• Firefox is not recognize my drive flash version 15.0

  Hello. Today I got in trouble with Firefox is slow and crash/freeze whenever I played a Facebook game. He told me to download the flash update I did about 6 times today. He still does not recognize that I have. I looked in my control panel in Flash and I can't see what follows: version Active X 15.0.0.0.152 NPAPI plug in version 15.0.0.152. Record PPAPI version is not installed. (I looked that up and it seems that this is not for my Windows XP. The flash drive, I installed was 15X32_mssd_aaa_aih (i) .exe. This is the manual I have asked me to download on support.mozilla.org... then he gave me a specific plug-in. Even though I knew I got it, I tried to download the plugin. It happens to 66% full download and application in use error (because I already have) and it automatically opens the window of IE to try again. I know very well that I have the most updated version. For some reason any Firefox just don't recognize it. I restarted my computer. Earlier, I have reset Firefox and regave permissions on my plug ins. I had honestly never one fix, I can do. Help please. I'll lose my religion if it even worse me! Thanks to you all. Oh and as you can see there, it's say I have Adobe Shockwave for Director Netscape plug-in, version 12.0.5.146, which is not true. My Control Panel, Flash section disagrees and says that I have 15.0.0.152.

  Lisa, I'm sorry that I can't find a download link for the old version of Flash Plugin 10.3 that I use, but I can't find it on the Adobe Web site.

  Adobe Shockwave Player 12.1 is not the same thing as Adobe Flash Player Plugin, which is also known as the Shockwave Flash.

  There is also a named Shockwave for the Director which is something else again.

  And with different versions of Flash Player for - IE = ActiveX, Firefox = Plugin and Chrome = pepper, they couldn't do worse if they planned to confuse the average user, because they were able to do so inadvertently.

  I curse Macromedia (which was acquired by Adobe) to use the name "Shockwave" on both of their programs.

• Windows does not recognize iPhone/iPod devices

  I tried to add music to a new iTunes library to my iPhone on my pc when I accidentally pressed the notification "do not trust this computer."

  I tried following the advice in this thread (removed the pilot): I accidentally hit "Do not trust" and now my iPhone won't sync to my computer. It won't ask me to trust him again even when I restart everything. Now what?

  And now my computer does not recognize my iPod or my iPhone when I plug it into the USB ports. They don't even charge. I know with certainty that the problem comes from my pc because when I plugged them both in another pc, Lesmanteaux both able to connect to the computer/iTunes. I tried restarting both devices, tried resetting the location and privacy, by restarting the computer, even performed a system recovery.

  When I go to "Devices and printers", the two devices are listed under Unspecified, Apple Mobile Device USB Driver, unknown category, troubleshooting needs (I tried that as well, when I do that it is said that all driver software is up-to-date)

  Driver status: Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  All my software is up to date (iPhone, iPod Nano, Itunes 12.1. (2. 27 64-bit)

  Please help me, I've got a flight tomorrow and all I wanted was to upload music.

  Have you tried using different USB ports? Try and see if it triggers the question "confidence." You can also give your iPod a restart is forced. Press the sleep and home for about 20 seconds. When you see the silver Apple, let go and let it reboot, then try again.

  If this does not work you can try something a bit more drastic. That's a lot of time, but not horrible. I had to do a few times with my devices and my computer.

  Try this, go to your control panel, add/remove programs.

  Remove iTunes (you won't lose any content not the program, I've done a few times), Mobile Apple, Apple Application Support device driver.

  For good measure, you can restart your computer just to remove the cobwebs.

  Then come out and redownload iTunes and reinstall it.

  Plug your iPod in and drivers must be reinstalled.

  All of your old info should be there. I've never lost anything. Essentially to remove iTunes and drivers have to reinstall fees, which can remove the obstacle 'I don't trust you. "

• iTunes does not recognize any of my iPhones (Windows 10)

  I've recently updated iTunes 12.4 and now my iPhone 5s, and my iPhone 4 are not recognized by iTunes. They appear as 'Apple iPhone' in my file Explorer, but are not accessible via iTunes or iFunBox. I tried all the options in the management of the link here:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  I removed the lockdown folder.

  I tried several cables.

  When I go into Device Manager, there is no "Apple Mobile Device USB Driver" under "In Bus USB controllers", but there is 'Apple iPhone' under 'portable '. If you're looking for an update to this pilot says 'Windows has determined the driver software for your device is up-to-date' "MTP USB device".

  More interesting still, I went down to iTunes 12.1.3, thinking that would take me back to a working version, but in fact it STILL does not recognize my phone(s)!

  What the hell is happening?

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.4.0.119 to 12.3.3.17 or 12.3.2.35, for example, then you will also need restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• iTunes does not recognize my iPhone

  Hello

  Because I downloaded Windows 10, iTunes (version 12.4) does not recognize my iPhone 6 (iOS 9.3.2). When I plug my phone into my laptop, my laptop recognize my phone and it loads normally, but with iTunes nothing happens.

  Any tips? (Sorry if I made some mistakes in English)

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.4.0.119 to 12.3.3.17 or 12.3.2.35, for example, then you will also need restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• Apple TV does not recognize the Apple wireless keyboard

  My Apple TV (4th generation) does not recognize the wireless Apple keyboard I want to make a pairing.  All my other devices (Mac, iPhone and iPad) recognize the keyboard.  This should be done automatically on the Apple TV, but it's not.  The Apple TV has acknowledged the Apple TV remote and paired with her.  Any help would be appreciated.

  Thank you

  Ken Templin

  I paired a non-Apple clone keyboard and it was somewhat capricious. You go to the remote controls and devices-> Bluetooth, enable matching on the keyboard, and it should appear in 'other devices '. You select and enter the number to validate. It requires no tvOS 9.2.

• Portege R700 - Autocad 2011 does not recognize the graphics card

  Hello

  I have toshiba Portege R700 with 64-bit win 7 installed.
  I need the computer for use with autocad 2011.

  For some reason any auocad does not recognize the graphics card installed on the computer.
  I suspect it because very little memory is allocated for the graphics card.

  How can I change with the memory allocated for the graphics card, or perhaps, can someone show me where can I find a driver that supports autocad.

  Thank you very much!

  Hello

  What Portege R700-xxx you have exactly?
  As far as I know the graphics memory cannot be assigned manually.
  Everything is controlled by the graphics driver and you have no influence on this

  You can try updating the graphics card driver maybe it would help.
  The most recent driver found on the page of the European driver Toshiba
  If not, you should check the manufacturer of the graphics chip driver

  Good luck

• Portege R700 - recognition of fingerprints does not recognize my fingers

  My recognition of fingerprints has worked for a day about. Now, it does not recognize my fingers (3 registered). When I go in utility prints/utilities-Toshiba digital displays with a fingerprint window Panel, indicating that he needs my fingerprints until I have access to the control panel. It will not accept my footprint so I select to close the window and leaves the control panel.

  When I visit different websites they say it is ready (on a yellow sign) and I keep having to say cancel because I fear it will record and then leaves me not in the Web site.

  It was such a bad experience I just go into the control panel and disable. How do I do that?

  Have you tried to delete saved fingerprints fingerprints?

• iTunes does not recognize my nano

  iTunes does not recognize my nano when connected to my pc

  Hi kaciej0nes,

  Thank you for using communities Support from Apple.

  I see that your iPod nano is not recognized by iTunes on your Windows PC.  In order to get this issue resolved, I suggest that you perform the steps described below.

  Connectivity/synchronization

  Follow these steps if your computer does not recognize your iPod or you have problems with your iPod synchronization.

  iPod not recognized by iTunes or computer

  Make sure that you have installed the latest version of iTunes from www.itunes.com/downloadssoftware. Try connecting to another USB port on your computer. Your computer needs a USB 2.0 port or a USB 3.0 port to connect the iPod nano. If you have a Windows PC that does not have a USB 2.0, in some cases, you can buy and install a USB 2.0 card.

  • If the iPod nano is connected to a USB hub, try to connect the iPod nano directly to the USB port of your computer.
  • iPod nano may need to be reset. Reset the iPod by holding down the sleep/wake button and the Home button until you see the Apple logo appears.
  • If you connect iPod nano to your laptop using the lightning cable, connect the computer to a power outlet before connecting the iPod nano.
  • Check the cable connections. Unplug the cable at both ends and make sure that no foreign objects are in the USB ports. Then reconnect the cable.
  • Try reseating the connector of lightning in the iPod. Lightning connector can be inserted in any event.
  • Try restarting your computer.

  If none of these steps resolve the problem, you may need to restore the iPod nano software.

  Also see the following for assistance:

  • iPod not recognized in 'My computer' and in iTunes for Windows
  • iPod not recognized in iTunes and Mac desktop
  • iPod nano (7th generation): frequently used functions

  iPod nano (7th generation): hardware troubleshooting

  Take care.

• Windows Media Player does not recognize the new downloaded songs

  I have a Pavilion a4310f Prod Nr: race AY014AA-ABA, Win 7 Home Premium 64-bit.

  I just found out that Windows Media Player does not recognize the songs, I recently downloaded from Wal-Mart music download Site.  The songs can be seen in the music library in a folder called 'Downloads' and I can open each song and he will play when double-clicked.  The problem is that I can't create a playlist containing the new songs and burn a copy of the reading list, because the songs are not listed in the Media Library Player any hot it is sorted (artist, Album, Genre, etc.).

  Any help/suggestions would be greatly appreciated.

  Mitch

  Problem solved!

  Went to: start == > Control Panel == > troubleshooting == > view all == > and ran troubleshooting on the library and the settings of WMP.

  Convenience store detected library corrupt and "in media files appear in the WMP library.  Then ran convenience store on WMP settings which reset OMP to default settings.  After that, everything worked as announced.

  Thanks to Big_Dave for putting me on the right track.