LabVIEW FPGA: An internal software error in the LabVIEW FPGA Module has Unknown

Similar Questions

• Internal software error of LabVIEW FPGA Module - 61499

  I get the error next (in a pop-up window) in the phase of sompilation for the FPGA target with a vhdl IP. This error continues to occur even after restart LabVIEW and the PC. Someone at - it solved is this kind of problem before without having to re - install the software?

  Here is the error information:

  Error-61499 occurred at niFpgaXml_GetValue_String.vi<><><><>

  Possible reasons:

  LabVIEW FPGA: An internal software error in the LabVIEW FPGA Module has occurred. Please contact National Instruments technical support on ni.com/support.

  Additional information: lack the tag required XML (/ CompileServerList)

  As a first step, I can compile the vhdl IP node successfully. However, once when I'm running a VI with the FPGA, the bureau stop working. After that I restarted by force, it cannot perform the build of a vhdl IP node. Even without connecing to the jury of LabView, he pointed out errors before the end of the sompilation.

  Interestingly, the screw which also includes nodes IP vhdl that I properly compiled before, I can still run the VI to the Commission and it works correctly.

  Thank you

  Looks like your ActiveJobsList somehow has been corrupted. I saw occur when computers are hard stop or blue screen during compilation. I don't have that LabVIEW 2014 installed on my machine, so your path will be a little different, and the file extension will be a .txt or .xml instead of .json, but try this:

  Move the file "C:\Program Files (x 86) \National Instruments\LabVIEW 2014\vi.lib\rvi\CDR\niFpgaActiveJobList.json" (or your equivalent) out of the above directory (back it upward and delete essentially) and restart LabVIEW. Must regenerate the file and resolve the problem.

• An internal software error occurred. Error code 8. LabVIEW: File permission error.

  I just changed a few contasts to controls in an FPGA core program, so there need to be recompiled.

  but it after compiling the program showed the error.

  An internal software error occurred. Please contact National Instruments technical support on ni.com/support with the following information:

  Error 8 has occurred to copy in nicrio_StockOutputVhdlAndInstantiation.vi-> nirviGetInstantiation___cRioStock_io.vi-> nirviGetInstantiation___nirviEIOImplementation_modGen.vi-> nirviGetInstantiation___nirviEIOImplementation_modGen.vi.ProxyCaller

  Possible reasons:

  LabVIEW: File permission error. You do not have the correct permissions for the file.
  =========================
  NOR-488: Error detected DMA hardware.

  C:\NIFPGA86\clntTmp\TensionCo~65_FPGATarg~A7_FPGABase~A1_eogs1jH0~18\Crio9426IoNode.vhd

  Ca person the reasons for which he showed an error.

  

  Hello

  I have a few questions,

  1. If you redefine your controls with constants, that you always get the same behavior?

  2. what equipment you try to deploy to? If it's a cRIO, have you formatted your controller and reinstalled the software for it?

  3. I did a little research and it looks like a potential problem may be with firewall/antivirus. Here is the document that explains that:
  http://digital.NI.com/public.nsf/allkb/D8D46FD4DBD1015786257540003B2DC6

  You have an antivirus installed on the computer? You can try to disable it and rebuild the bitfile?

  Kind regards

• FPGA an internal software error occurred. writing of memory

  Hello world

  We encounter an error during the compilation of an FPGA VI. It is probably related to our use of block FPGA memory. We have a non-timed while loop which is reading a host-target FPGA FIFO and writing in memory block (inside a Subvi called z_scan_write.vi). In another loop (this one is timed loop), there's a Subvi we called z_scan_read.vi, within which read us of the memory block.

  Does anyone have an idea what goes wrong and how to avoid this problem? Thank you very much in advance for any suspicion!

  The full error message is as follows. Note that this is for the two subVIs z_scan_write.vi and z_scan_read.vi...

  An internal software error occurred. Please contact National Instruments technical support on ni.com/support with the following information:
  nirviUIDToObject.vi
  Error getting of to the UID object reference.
  All the analyzed text:

  
  -61060
  C:\Program Files (x 86) \National Instruments\LabVIEW 2010\vi.lib\rvi\ClientSDK\Core\ErrorReporting\Private\nirviPersistentNameToProjectItemLineInfoCallback.vi
  zIntensityTuples/{29C03A58-DC8D-4BC7-BAFA-66AFAE4E42D1}/%s
  
  
  ProjItem
  
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.z_scan_write.vi_FPGACompileCopy00000021.VI
  2747
  Memory write 'memory method Node '.
  
  
  ProjItem
  
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.z_scan_read.vi_FPGACompileCopy00000001.VI
  194
  Reading memory "memory Node method.
  
  
  ProjItem
  
  
  
  

  
  -61060
  C:\Program Files (x 86) \National Instruments\LabVIEW 2010\vi.lib\rvi\ClientSDK\Core\ErrorReporting\Private\nirviPersistentNameToProjectItemLineInfoCallback.vi
  zIntensityTuples/{29C03A58-DC8D-4BC7-BAFA-66AFAE4E42D1}/%s
  
  
  ProjItem
  
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.z_scan_write.vi_FPGACompileCopy00000021.VI
  2747
  Memory write 'memory method Node '.
  
  
  ProjItem
  
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.z_scan_read.vi_FPGACompileCopy00000001.VI
  194
  Reading memory "memory Node method.
  
  
  ProjItem
  
  
  
  

  
  -61106
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  
  
  
  2
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2803
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  3
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2816
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  
  

  
  -61106
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  
  
  
  2
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2803
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  3
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2816
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  
  

  
  -61106
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  
  
  
  2
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2803
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  3
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2816
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  
  

  
  -61106
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  
  
  
  2
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2803
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  3
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2816
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  
  

  We could solve the problem. It was actually caused by the fact that we had set some subVIs to not reentrant. Their semifinal implementation (with the option to clone preallocate) solved the problem.

• FPGA internal software error

  Hello

  I'm under LV 2010 SP1, I don't know what version of the FPGA module I have, but I think it has been upgraded during the SP1 update.  The error is less.  It refers to two of the four globals, I use communicate a FPGA timed to a non-timed loop loop.

  My code has compiled since the upgrade, but not since the addition of the globals...

  I'll appreciate any help on this.

  Roger

  An internal software error occurred. Please contact National Instruments technical support on ni.com/support with the following information: nirviUIDToObject.vireference object get error for UID. All the analyzed text:
  -61103 1NI. Munge.S3 Global.vi_FPGACompileCopy00000001.vi21C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi4624Global Variable: ' NEITHER. Munge.S3 Global.vi_FPGACompileCopy00000001.vi'31C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11890Global Variable: ' NEITHER. Munge.S3 Global.vi_FPGACompileCopy00000001.vi'
  -61103 1NI. Munge.S2 Global.vi_FPGACompileCopy00000001.vi21C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11881Global Variable: ' NEITHER. Munge.S2 Global.vi_FPGACompileCopy00000001.vi'31C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11878Global Variable: ' NEITHER. Munge.S2 Global.vi_FPGACompileCopy00000001.vi'
  -61103 1NI. Changed Munge.AO Global.vi_FPGACompileCopy00000001.vi21C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11906Global Variable: ' NEITHER. Changed Global.vi_FPGACompileCopy00000001.vi Munge.AO'31C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi4622Global Variable: ' NEITHER. Changed Global.vi_FPGACompileCopy00000001.vi Munge.AO'41C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11905Global Variable: ' NEITHER. Changed Global.vi_FPGACompileCopy00000001.vi Munge.AO'
  -61103 1NI. Munge.S3 Global.vi_FPGACompileCopy00000001.vi21C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi4624Global Variable: ' NEITHER. Munge.S3 Global.vi_FPGACompileCopy00000001.vi'31C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11890Global Variable: ' NEITHER. Munge.S3 Global.vi_FPGACompileCopy00000001.vi'
  -61103 1NI. Munge.S2 Global.vi_FPGACompileCopy00000001.vi21C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11881Global Variable: ' NEITHER. Munge.S2 Global.vi_FPGACompileCopy00000001.vi'31C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11878Global Variable: ' NEITHER. Munge.S2 Global.vi_FPGACompileCopy00000001.vi'
  -61103 1NI. Changed Munge.AO Global.vi_FPGACompileCopy00000001.vi21

  Snip...

  Unfortunately, even if you can guarantee that the written word never happen at the same time if you write only once per carton, LabVIEW FPGA currently only has not the ability to position the system globals arbitratio for multiple entries on the diagram can cause this error.  What I would say is that you write the overall each iteration of the loop outside the structure of the case and that he wire simply the value on a tunnel on the structure of the case.  This will allow you always change the value each time through and will eliminate the error of code generation.

  If you want to send your comments about this particular use case of LabVIEW FPGA R & D, I would recommend that you post your idea in the Exchange of ideas of LabVIEW FPGA.

• Status code: internal software error-223091 occurred in the DSA software. Please contact National Instruments support

  Hello

  I work with card 4461.

  When writing the data on the card I get this error

  The channel which has been set up had

  Update rate: 9210

  None of the samples: 87643

  Sample mode: finite samples

  Sync: Synchronization with AI0 even of the same device

  The values lie between 6 V and 1 .2V

  error occurred in the function .

  {Message of error =-223091 = "internal software error occurred in the software DSA. Please contact National Instruments Support.\n\nTask name: Magnet\n\nStatus Code:-223091 "}"

  The Stack Trace:

  «to nNIMSSAIL100.StatusObserverT<><>otNetApi > >.» CheckWithName (StatusObserverT<><>otNetApi > *, tCaseInsensitiveBasicString\\,_STL::allocator\\,nNIDMXS100::tLocaleConsideringWideStringComparitor\\,nNIDMXS100::tLocaleConsideringWideStringCaseForcer>* pName) \r\n

  to nNIMSSAIL100.StatusObserverT<><>otNetApi > >. Check (StatusObserverT<><>otNetApi > *) \r\n

  to nNIMSSAIL100.StatusObserverWrapperT<><>otNetApi > >. Check (StatusObserverWrapperT<><>otNetApi > *) \r\n

  to nNIMSSAIL100.WriteotNetApi >, class nNIMSSAIL100::AnalogWrite, double > (tTask *, Double *, UInt32, UInt32, UInt32, Double, Boolean, Boolean, tScaledDataFormat, StatusObserverT<><>otNetApi > *) \r\n

  to nNINETAI2005100.Write1DotNetApi >, class nNIMSSAIL100::AnalogWrite, double, double, cli::array^ > (task task, Double [] buffer, UInt32 numChannels, UInt32, UInt32 numSamples lines, Double timeout, Boolean autoStart, Boolean interlace) \r\n

  at NationalInstruments.DAQmx.Internal.AnalogSingleChannelWriterImpl.WriteMultiSample (Boolean autoStart, Double [] data) \r\n

  at NationalInstruments.DAQmx.AnalogSingleChannelWriter.WriteMultiSample (Boolean autoStart, Double [] data) \r\n

  Project.Analog1ChannelWriterTask.Write (Double [] data, Boolean AutoStart) in C:\\Project\\AnalogWriterTask.cs:line 446\r\n

  to Project.HardwareIO.WriteAO (Double [] Data, Boolean AutoStart) in C:\\Project\\HardwareIO.cs:line 120\r\n

  at Project.DataAcquisition.RunAcq (C:\\Project\\DataAcquisition.cs:line 182\r\n)

  at Project.DataAcquisition.Run (C:\\Project\\DataAcquisition.cs:line 68\r\n)

  at Project.Program.ThreadFunction (C:\\Project\\Program.cs:line 47\r\n)

  at System.Threading.ThreadHelper.ThreadStart_Context (Object state) \r\n

  at System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state) \r\n

  to System.Threading.ThreadHelper.ThreadStart ().

  TargetSite:

  {Void nNIMSSAIL100.StatusObserverT<><>otNetApi > >.} {CheckWithName (nNIMSSAIL100.StatusObserverT<><>otNetApi > *, nNIDMXS100.tCaseInsensitiveBasicString\,_STL::allocator\,nNIDMXS100::tLocaleConsideringWideStringComparitor\, nNIDMXS100::tLocaleConsideringWideStringCaseForcer > *)}

  I am using VS2005 c#

  Please tell me what wroing

  Kind regards

  Alok dandois

  Hey Alok,.

  This error code means that the revision of the map is more recent and not yet supported by the driver.  That the release of new versions of the same map with new features, the ID usually changes requiring a new version of DAQmx.  Try upgrading to the latest version of DAQmx and try again.

  While you're there.  See if you can find the product ID located in Device Manager (if you are using Windows).  Once in the Device Manager, right click on the device and click Properties.  Go to the Details tab, and then copy the entire string that is displayed under "Device Instance Id".  It should look something like PCI\VEN_xxxx & DEV_xxxx...  Paste in a reply in this thread can I be sure of your problem.

  Germano-

• Continue to receive the Error Message: internal software error: internal software error: line 332

  Try to burn a DVD and I get an error message. The full message is:

  internal software error: / Volumes/versions/Amawat/Main/XcodeProjects/AuthorCore /... /... / Ulator/TitlePlanner/CVOBUPlanner.cpp Sonic, DVDCreator, FormatLib, Vob, line 332

  Don't know what that means. Was working fine this morning, came back and kept getting the message. I even got a new project from scratch and rebuilt everything and still get the error message.

  Help, please.

  What version of yet?

  The chapter on each other or too close to beginning or end markers?

  Several videos on a timeline?

  If this isn't the case, you use the dynamic linking?

• Internal software error error-224606 in MIO

  Hello

  I get this error-224606: "internal software error has occurred in the MIO software. Please contact National Instruments. »

  It happens when I try to use the DAQmx controls Task.vi to abandon a task that awaits a digital triggering of an analog acquisition that has no time-out.

  I'm using LabVIEW 2010 sp 1.  My version of DAQmx is 9.2.3.  The camera I use is a DAQPad-6016

  When I was running this software on a USB-6251, I had no such problem.

  All solutions?  Thank you

  Hi pgaastra,

  Hmm, the error you see certainly seems buggy and should be the subject of an investigation.  However, I'm not sure about the validity of the abandonment of a task in the middle to access the DAQmx Read.  There is a better way to achieve your final goal.

  The easiest way is to simply ask the number of samples available.  You would then only call DAQmx Read after there is a number not null samples available.  See the code attached below.

  Best regards

• internal software error: Vobulator/BlockPlanner/BlockPlanner.cpp, line 217 creating menu

  I'm doing my DVD menu, but when I try to preview, it gives me the error message: "internal software error: Vobulator/BlockPlanner/BlockPlanner.cpp, line 217".

  I can't build my DVD either because of this.

  This happens only when I add an image to a submenu page.  My main menu has a picture about this and he isn't wasting, but when I have another menu page which is linked to the home page and add the image about it, it gives me this error code.

  Someone at - it tips?

  Looking at this post (Re: internal software error:.\Vobulator\BlockPlanner\BlockPlanner.cpp, line 217 ) in the thread you point, here's what I think is happening in your situation. Note that there are other issues that take this same error, particularly in slide shows.

  When you use a fixed image for a menu background, it goes in the background layer in the psd.

  When there is a video (bottom of movement), still replace the background with video layer.

  The query tab has a place for video and audio. If you put an image (jpg, for example) in the option video, apparently, when still calls, it throws this error.

  Your workaround solution, create a video out of the still image, will work, but all you have to do is change the menu in photoshop and add the image instead of the bottom layer.

• Internal software error in PE9

  Hello

  I'm trying to 'share' a project.  I'm looking to make a DVD.

  I'm not having much luck.  Whenever I hit the button burn the following series of events takes place:

  It seems succesfully encode media because once this process is at 99% for a few moments, he goes to the media of compilation.  At the moment where he is compiling media he recorded 95%.  It takes a few minutes to up to 99% and then I get the following error:

  Internal software error: vobulator\blockplanner\block planner.cpp, line 215

  Anyone have any idea what this means and if yes, how can I solve this problem?

  Some information:

  The file is large (at least compared to what I usually do)-55 minutes of mpeg2.

  My computer description is:

  Dell Studio XPS 435MT

  Intel Core i7 processor

  920 @ 2.67 GHZ

  8 GB Ram

  64 bit

  Thanks for the help!

  Try initially "burn folder" to see if it's PRE or a problem with your burner or media.

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• A transport-level error has occurred when receiving results from the server. (provider: TCP provider, error: 0 - the semaphore timeout period has expired.)

  Hello

  I get the below error message while my windows application inserts data in SQL Server.

  A transport-level error has occurred when receiving results from the server. (provider: TCP provider, error: 0 - the semaphore timeout period has expired.)

  I use LINQ-to-SQL.  SQL Server is installed on Windows server 2003.

  We are using SQL server 2008 r2.

  When we insert large data base records, approximately 1 million we get this question.

  Please suggest.

  Hello

  When you use Windows server, we ask you to send the query in the link depending on whether they are the experts.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Thank you.

• Cannot export DVDs even - internal software error

  This is the error code:

  internal software of the volumes: error, versions, mango, xcode projects/authorcore /... /... /Sonic/DVDCreator/FormatLib/Vobulator/TitlePlanner/CGOPGrouper.c pp, line 410

  Tried to export disk image but no luck either

  Thanks Stan,

  OK, I fixed it by starting a new complete project and re do the project. Then he worked... weird. I did the exact same thing project too:

  Intro / first video game created with a menu > in static menu with a Play All and 3 separate chapter links. (Not very complicated so it was easy to match exactly)

  Just for the reference of the foregoing response of Stan: I had 3 videos on my calendar, I was Admin, I had gaps in my timeline in Prem (which won't matter in any way, as I wasn't using dynamic links) and not substitutions. So I can't tell any of them were the factor affecting. I think it's just "one of those bugs.

  Thanks stan anyway, appreciate your reply.

• The Web Acceleration Client error (513) - internal error of the Web acceleration Client has detected an internal error that caused the connection between the accelerometer of the Web

  The Web Acceleration Client error (513) - internal error
  The Web acceleration Client has detected an internal error that caused the connection between the customer to accelerate Web and server acceleration Web to be broken. A new attempt of the web page may correct the problem.

  I get this error at all times when working in the ancestry.com Web site. I have to reload the page on almost every search I do on this Web site. It is the site of the ONLY I get this error message, can run uninterrupted for several hours on other sites and never get this message. I talked to the people at Ancestry.com support and they did 2 recommendations: turn antivirus (did not help) or switch to another web browser. I tried both 11 IE and Chrome Version 31.0.1650.63 m and I have no problem with either of these 2 browsers this error.

  Is there a problem with the way Firefox and ancestry.com communicate?

  Hello byron.lewis, many site problems can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• 500 internal Server Error on the server that is running Windows 2012 R2 and IIS 8.5

  Hello. We have a new server. On our old server, I used to get all debug information. Cold Fusion on my computer if something was wrong with a page of Cold Fusion. Now with the new server, all I get is a 500 internal server error. Is it because something is not properly configured on the server and debug information. Cold Fusion is not able to display? Anyone know what I should do to get Cold Fusion debugging information. to display? Here's what we all now:

  Our new server runs Windows Server R2 2012 and IIS 8.5

  ColdFusion Standard 11

  SQLEXPRESS 2008

  
  

  Thank you.

  Andy
  

  I have two settings enabled for my development environment, and it works for me. How about your IIS settings: you have detailed error messages that are enabled for local and remote applications?

• DAQmx 201105 error using the cDAQ 9403 module

  I'm using the DAQmx C library of Borland Delphi programming.  My hardware configuration is a cDAQ-9174/9178 with a 9222, 9401 and 9403 module.  Here's where I manage problems at the moment:

  I want to run three different tasks on my 9403 module:

  Task1 is an output buffered with frame sample clock/cDAQ1/do/SampleClockTimebase to 100 kHz (channel 0-5)

  Task2 is a software-timed output (20-25 channels)

  Task3 is a timed software entry (channels 26-31)

  Task2 and Task3 me give 201105 errors when I try to use DAQmxWriteDigitalLines and DAQmxReadDigitalLines, respectively.  Create channels for these tasks works very well, however.  Apparently, there is some reason to believe that the 9403 won't perform Task1, except that it works without raising errors.  This work by accident and only because I am using channels 0-5?  That's why I'm getting errors when trying to use the tasks 2 and 3?

  Any thoughts are appreciated.

  Hi André,.

  This is expected behavior and is documented in the digital i/o considerations for devices of the series C using DAQmx.

  The 9403 is registered has a series module that has the following restrictions:

  • You may not use modules series and parallel together on the same task timed material.
  • You may not use modules series for the trigger.
  • You can do static and timed tasks at the same time on a single serial module.
  • You cannot material timing in one direction at a time on a module in the two-way series.

  You can do task 1, or you can do tasks 2 and 3.  You can not do the tasks 1, 2 and 3 together, as you saw.  You can do it with an additional 9403 if you move the software tasks timed to the other module.

  The 9401 is a parallel module that does not have these restrictions.  Snacking is configurable, however, which means that you must set the direction in groups of 4, but it seems that you are using too many lines for a single 9401.