[Labview] I want to get the average value in each new 100 samples.

Hello. I'm Sophie.

I'm studying Labview for my research.

For me, the sampling frequency is 125KHz.

I want to get the average value in each new 100 samples.

Therefore, I want to get an average value of 1 ~ 100th samples and store this average value. Call assets(1).

Then, I want to get an average of 101 ~ 200th samples and store this means value, call moyen2.

I don't know how me I want.

Thank you

Sophie.

Tags: NI Software

Similar Questions

Persistent for the subtraction of the background image collection (how to get the maximum value of each pixel in a series of images IMAQ)

Hi all

I have a system of LabVIEW which takes advantage IMAQ tools and features of the Vision Development Module. A useful feature that I put in place is to be able to take a snapshot of the video stream and then subtract this single image among the subsequent images.

What I want to do is to collect a series of images instead of one, and then create a unique image of these frameworks is just the maximum value of pixels in each pixel (a bit like a display persistent).

It would probably be very easy to be implemented by converting the image to a table and then by doing math number on the table and then turning into an image, but I hope that someone here may know how to use the IMAQ/VDM tools to do this in a way more compact.

Thank you very much

MK

How about using Max comparison IMAQ operation?

Calculate the average value

the data that I measured changed quickly, so I want to get the average value of the data

Don't tell me to use mean.vi, I already know.

and I got an idea that is to add data in a table every time, then the sum of all value data and take the line of result by the number of items

but I don't know how to do this, anyone can build a simple vi to show me? Thank you

I enclose my vi that uses mean.vi to the average value of calc, you can remove it and help in your path, thank you!

Do not add your data in a table that grows forever. What a waste of RAM. To calculate the average, you only need to sum and N.

Here is a simple code to accumulate the sum of the values in a shift register and divide by the number of add operations.

Get the highest value of acquired data

Hi, how can I get the highest value of data according to data acquired using the accelerometer ADXL345 and LINX in LabVIEW?

I want the highest data to be shown with a flag. However, the data being shown are always the last acquired data. My problem would be what happens if the highest data somewhere at the beginning or in the middle of all the acquired data? How to display the highest data using an indicator?

Here's a look at my front, block diagram, and sample of the acquired data.

From the front panel, the basic indicator of detected last poster 0.1929 (amplitude), which is the last value. But looking at the Excel file, the highest data are data which is 0.2013. The highest, I want to be displayed on the indicator not the last value. How do I do that?

Thank you!

I gave you an example of what you need to do - it is not okay if wire you the new value and the old value for the X or Y - it will always return the maximum of the two values so the order doesn't matter. It would have been more useful if you had posted what you tried the max & min. You need a registry to offset inside the loop (like I did with my while loop). If you only want to display the maximum value for each iteration of the loop for external, you must initialize the shift register by plugging a 0 to its terminal on the left. A shift register her pinned the value of the last run - probably not what you want here.

How to get the current value of the checkbox button programmatically in the adf
Hello
I want to get the current value of the checkbox (checked/unchecked or 0/1) in my bean java whenever I press the button "submit" on my page jspx.

My version of JDeveloper is: 11.1.1.6.0
Where the value checkbox link? The State of the check box is held in the value property of the check box. This is normally an EL as
```
#{bindings.Myvar1.inputvalue}
```
or something pointing to a bean property. This value can be read from the listener to the action of the submit button
```
        BindingContainer bindingContainer = BindingContext.getCurrent().getCurrentBindingsEntry();
        AttributeBinding attr = (AttributeBinding)bindingContainer.getControlBinding("Myvar1");
        Object obj = attr.getInputValue();
```
Timo

How to get the last value

Hi I have a senerion in which I want to get the last value: -.

CREATE TABLE T1
(NAME VARCHAR2(10), NO NUMBER, NO2 NUMBER);

INSERT INTO T1 VALUES('A',10,20);
INSERT INTO T1 VALUES('C',100,2);
INSERT INTO T1 VALUES('B,124,5);
INSERT INTO T1 VALUES('A',1,400);
INSERT INTO T1 VALUES('B,2,234);
INSERT INTO T1 VALUES('B',2,7);
INSERT INTO T1 VALUES('C',21,12);
INSERT INTO T1 VALUES('A',3,300);
INSERT INTO T1 VALUES('B,55,1);
INSERT INTO T1 VALUES('C',234,1);
INSERT INTO T1 VALUES('B',20,72);
INSERT INTO T1 VALUES('A',200,0);
INSERT INTO T1 VALUES('B',546,32);
INSERT INTO T1 VALUES('C',89,888);

INSERT INTO T1 VALUES('B',485,12);
INSERT INTO T1 VALUES('C',1,77);
INSERT INTO T1 VALUES('B',339,12);
INSERT INTO T1 VALUES('A',0,300);
{\code}

Now for all  A i want the value (order by name,no,no2) i.e value of no2 0
for all b i want 32
and for all c i want 1

i.e last value in order by clause.

i tried this 

 select name,no,no2,last_value(no2)
 over(PARTITION BY  name order by no,no2) nm
 from t1

can anyone please help me?

Thanks

Edited by: vinod on Jan 6, 2012 8:58 PM

How to get the Max value in Essbase
Hello

I have problem to get the max value of 3 years in Essbase.
How can I get the max value of Dec 2009, Dec 2010, Dec 2011.
Suppose the value of Dec 2009 = 1000, dec 2010 = 1500 and Dec 2011 = 2000
I want to get the max value of these three value, how can I do this in the Essbase calculation Script.
Any idea?

Thank you.

Kind regards

Joni
You did not specify if year and period are there separate dimensions, in any case as always a number of different possbilities and I don't have much time today to think about, but only one method can be to use @MAXRANGE

DIFFICULTY (other members to set, 'Dec')

'MemberToStoreAgainst' = @MAXRANGE("MemberToFindMaxRangeFor","2009:"2011");

ENDFIX

See you soon

John
http://John-Goodwin.blogspot.com/

Case: View the balance of the average customer for each area code.
Hi again together. As a C++ / VB programmer, I used by using a control specified structures like for loops and while loops and use predefined variables to solve my problems. I have a little trouble to adapt to the SQL paradigm, which really does contain a few key words and in built functions.

I had to have some exercises to do by my tutor at the University, and I have a big enough problem with this one. I to recover the balance of the average customer of a 'customer' entity, but I have to do for each area code, not as a whole. When I look at this problem, I immediately think of loops, conditional check, a variable of integer type to control the loop and possibly a table or a vector data type to store the results. SQL is rather simple, and its simplicity is actually causing me problems, ironically.

Here is the "Customer" entity which I am to get directions:
```
CREATE TABLE CUSTOMER 
(
            CUS_CODE            NUMERIC(6) 
            CONSTRAINT CUSTOMER_PK PRIMARY KEY,
            CUS_LNAME       varchar(15) NOT NULL,
            CUS_FNAME       varchar(15) NOT NULL,
            CUS_INITIAL     CHAR(1),
            CUS_AREACODE      VARCHAR(3) DEFAULT '02' NOT NULL CHECK(CUS_AREACODE IN ('03','07','08')),
            CUS_PHONE       VARCHAR(8) NOT NULL, 
            CUS_BALANCE     NUMERIC(9,2) DEFAULT 0.00
);
```
I was able to order the customer balances by their area code and to calculate the balances of customers on average as a whole, but as I said I had difficulties to calculate an average of customer balances exactly their area code and do it for all the codes present.

Any help / example code would be much appreciated.
OK, so you will understand how to get the average on all clients in SQL, not true? Something like
```
SELECT AVG(cus_balance) avg_balance
  FROM customer
```
If you want to get the average balance by another column, you simply group this column, i.e.
```
SELECT cus_areacode, AVG(cus_balance) avg_balance
  FROM customer
 GROUP BY cus_areacode
```
This essentially tells Oracle to group all data by area code before you run the aggregate function AVG on the cus_balance for each of these groups.

Justin

Form - different default value for each new line needed
Hi all

I'm a newbie in the APEX and now I am struggling with a problem in the form of tables.

On my page, I report master detail, where the detailed part is created in a table form (I used the Wizard).

Now I want to implement the following:

When I click on the button that adds the line of tabular form, I want to assign the default value for the column 'LOGNO' in my tabular form. Value for this column is table extraction and I this value already stored on the page to display one element 'P210_LOGNO_ACT '.

When I click on the button for one second third etc.) times I would like to set the default for the column LOGNO as LOGNO = P210_LOGNO_ACT + 1.

Y at - it something simple, or is - this difficult to attribute the different value to each new row of tabular form?

Version of the apex 4.1.0.00.32

Thanks in advance!

Jiri
Inspect your column and find out the name of your column attribute, it must be something like fxx (f01, f02, f03... etc) and use this column instead of f11 (in my case, the name attribute is f11)

Create a JavaScript function in your page header
```
function myaddRow() {
//perform standard addrow
  addRow();
  //set default value here
//make sure you replace the P5_X with your page item name
  $s('P5_X',parseInt($v('P5_X'))+1);
  $('input[name="f11"]')[$('input[name="f11"]').length-1].value=$v('P5_X');
}
```
Change your button to add a line and call the function above, as shown below
```
javascript:myaddRow();
```
See this example of work http://apex.oracle.com/pls/apex/f?p=46417:5

Get the Max values and average of the different cycles in the single channel

Hello

I'm trying to get the Max values and average of the single channel that has different cycles it contains. I tried to use commands such as Chnclasspeak3 and chnpeakfind, but they were not useful for me. What I need is the Max values and average of the different cycles numbers saved in the data channel.

Exampld if the string contains 5 numbers of repetitive cycles, then we must find the maximum values and the average of these 5 cycles in the single channel. Attached reference data. This is the .raw file and I have the plugin for it to use in diadem 11.1.

Kind regards

X. Ignatius

Hello, Ignatius,.

Sorry, it took some time to provide a replacement based on the script for the function. Please take a look at the attached script. I changed the script to use my function if the tiara-version is less than 12. My script function is not as fast and more stable than the implementation of tiara, but for now, it does the job

Andreas

Get the current value of the menu a cluster ring

Hello

I am trying to program a bunch of rings of menu to use the same options and disable the option even in the other rings of menu if it has already been chosen. It works essentially as is at the moment, but it shows each button by using a 'deactivated' option because I'm turning off the option even in the buttons that have this value. I did it using a loop knot and property and [] DisabledItems en mass. Now, I want to go to the iteration of the loop for the menu ring which already has this value.

To do this however, I want to get the current numeric value of the ring of menu and an array of search values. If the value of menu rings appear in this table, then I want to move to the current iteration of the loop. The problem I have is that when I try to use a property node and type the property value, instead of giving me a long 32 output, it gives me the so-called 'Variant', which I have not seen before. I'm not sure how to find a table and see if the value I have is in this table. "Search table" seems just an index to be returned, I think that I want a Boolean or something. I'm also not sure how to skip an iteration of the loop (although I imagine it won't be too difficult to understand mine, I hope).

I apologize if this is very obvious, or if my message is not clear. I started using LabVIEW, a few weeks ago and I'm still learning. I have included a picture of my Subvi downstairs.

Thank you
Nathan

Variant of data allows to convert the variant to a numeric type (whatever representation you need).

Search D 1 table returns-1 if the element was not found. If you just compare the index with a greater or equal to zero and the result will be if the element was found in the table.

calculation of the average value of the sorted data and polar route drawing

Hello

I did a VI that calculates the average value of the wind rotor/speed-ratio in the sections of 30 degrees (wind direction). He also called the polar plot of calculated data. Everything works, but I would like to make more detailed calculations and drawings, by increasing the resolution to 1 degree, or...

Problem is VI, I did, is not easy on a large scale. At the moment, I have 12 parallel structures of switch-box to calculate the average value and build the array function to collect data calculated for Polar plot to draw the image in real time. I know it's probably the worst way to do it, but since I have done a few things with LV, it was the only way I managed to do what I wanted.

Now, if I continue in same way to reach my goal, I have to create 360 Parallels switch-case structures... that are crazy.

Something like the calculation of the average of the table or matrix (zero/empty values should not be calculated on average) inside the loop or similar way would probably be the best solution.

So, polar plot drawing is not a problem, but creating a reasonalbe average metering system is. Any ideas?

I would also like to rotare northward to the top (0 deg), and degrees of increase in a clockwise direction on polar ground dial plate (as on the compass).

VI on the attachment. (simplified version of the complete system)

I have signals:

-Wind speed

-wind direction

-Rotor speed

I want to:

-calculate the average value of the speed of the wind / rotor - ratio in sections (5 degrees, 1 degree)

-Draw a polar path of the wind rotor/speed-ratio of averages in propotion of wind direction

I'm using LabView 2009

Thank you very much.

It is closer to what you're looking for?

How do you find the average value of all the data between two points on a single channel

I'm tring to calculate the average value of all data points in a single field between two distinct points

I rasthaus an illustration.

Hi smoothdurban,

I thought you wanted to specify the area of interest with the sliders of the band. If you rather automatically define the area of interest based on thresholds, etc., we cannot see the interactive nature of the example I sent.

What are the criteria used to determine the start and end of the region of interest lines?

I would be able to type this out for you if you sent a representative data set ([email protected])

Brad Turpin

Tiara Product Support Engineer

National Instruments

Find the average value of a buffer

Hello

In my VI Panel, I have a digital control, a button and a digital display.

When the user, enter a number in numerical order and press the button, the digital display should show the average value of all the past 5 values entered in the digital control, for example:

1st entry: 10-online average = 10 (as sum = 10)

2nd type: 0-online average = 5 (as sum = 10 + 0 = 10)

3rd enter: 5-online average = 5 (you get the idea...)

4 enter: 1-average online = 4

5 enter: 14-online medium = 6

6 enter: 2-online average = 4.4 (sum = 0 + 5 + 1 + 14 + 2 = 22, because the 1st value is thrown)

How to write this VI?

Thank you!!

You can also use arrays to hold the data in a registry change and find the average value of the last five items.

Good luck

Get the default value for class LV 1498 error

I call get the Default Value.vi LV class to dynamically load a class.

It was working fine until I added Open Config Data.vi to read an .ini file.

The application works fine when I press the button RUN in the LabView development environment, but when I create the executable file with Application Builder and then run it, I get:

"1498 error occurred getting class LV Default Value.vi"

Possible reasons:

LabVIEW: Library has errors. Correct the errors before performing this operation.

«"" "String of full appeal:»»"»

Download LV class by default Value.vi

Test.VI

LabVIEW has tried to load the class in this path:

g:\cal\devices\Digital300Meter\Digital300Meter.lvclass

I narrowed the problem down to open Config Data.vi included in the application, not in the class. I don't have to call the Open Data of Config vi to get this error.

I have a Subvi, called "SelectDevice" which refers to Open Data from Config. In my main Test.vi SelectDevice is in the true case of a true/false case structure, which is set to False.

If I put a design schema off around the Open Data of Config vi, I do not get the error.

I suspect that including Open Config Data include a VI in the application that interferes with the LV ranks by default.

Thank you, it works!

I also put the additional Exclusions page as follows:

Disconnect the type definitions - verified

Remove unused polymorphic instances of VI - verified

Remove unused libraries project - members verified

Change the project library file after removing unused members - unaudited

[Labview] I want to get the average value in each new 100 samples.

Similar Questions

Maybe you are looking for